The use of binary polymeric networks in stabilising polyethylene oxide solid dispersions

The objective of this study was to determine if a high Tg polymer (Eudragit® S100) could be used to stabilize amorphous domains of polyethylene oxide (PEO) and hence improve the stability of binary polymer systems containing celecoxib (CX). We propose a novel method of stabilizing the amorphous PEO solid dispersion through inclusion of a miscible, high Tg polymer, namely, that can form strong inter-polymer interactions. The effects of inter-polymer interactions and miscibility between PEO and Eudragit S100 are considered. Polymer blends were first manufactured via hot-melt extrusion at different PEO/S100 ratios (70/30, 50/50, and 30/70 wt/wt). Differential scanning calorimetry and dynamic mechanical thermal analysis data suggested a good miscibility between PEO and S100 polymer blends, particularly at the 50/50 ratio. To further evaluate the system, CX/PEO/S100 ternary mixtures were extruded. Immediately after hot-melt extrusion, a single Tg that increased with increasing S100 content (anti-plasticization) was observed in all ternary systems. The absence of powder X-ray diffractometry crystalline Bragg’s peaks also suggested amorphization of CX. Upon storage (40°C/75% relative humidity), the formulation containing PEO/S100 at a ratio of 50:50 was shown to be most stable. Fourier transform infrared studies confirmed the presence of hydrogen bonding between Eudragit S100 and PEO suggesting this was the principle reason for stabilization of the amorphous CX/PEO solid dispersion system.

Alternative drying techniques for the manufacturing of hydrogel-forming and dissolving microneedle arrays.

Dissolving polymeric microneedle arrays and hydrogel-forming microneedle arrays have attracted much attention during recent years due mainly to their biocompatibility and capacity for enhanced drug delivery. Nevertheless, for the production of this type of devices, typically, a drying step is required. Microneedles are prepared following a micromoulding technique using aqueous blends of Gantrez® S-97. Currently, production of microneedles arrays involves a long drying process of 48 hours. Therefore alternative drying methods were investigated including microwave radiation and hot air convection.

The use of binary mixtures of 1-butyl-1-methylpyrrolidinium bis{(trifluoromethyl)sulfonyl}imide and aliphatic nitrile solvents as electrolyte for supercapacitors

Abstract The development of high voltage electrolytes is one of the key aspects for increasing both energy and power density of electrochemical double layer capacitors (EDLCs). The usage of blends of ionic liquids and organic solvents has been considered as a feasible strategy since these electrolytes combine high usable voltages and good transport properties at the same time. In this work, the ionic liquid 1-butyl-1-methylpyrrolidinium bis{(trifluoromethyl)sulfonyl}imide ([Pyrr14][TFSI]) was mixed with two nitrile-based organic solvents, namely butyronitrile and adiponitrile, and the resulting blends were investigated regarding their usage in electrochemical double layer capacitors. Both blends have a high electrochemical stability, which was confirmed by prolonged float tests at 3.2 V, as well as, good transport properties. In fact, the butyronitrile blend reaches a conductivity of 17.14 mS·cm−1 and a viscosity of 2.46 mPa·s at 20 °C, which is better than the state-of-the-art electrolyte (1 mol·dm−3 of tetraethylammonium tetrafluoroborate in propylene carbonate).

Binary Mixtures of 1-Butyl-1-Methylpyrrolidinium Bis{(trifluoromethyl)Sulfonyl}Imide and Aliphatic Nitrile Solvents As Electrolyte for Electrochemical Double Layer Capacitors (Invited).

Electrochemical double layer capacitors (EDLCs), also known as supercapacitors, are promising energy storage devices, especially when considering high power applications [1]. EDLCs can be charged and discharged within seconds [1], feature high power (10 kW·kg-1) and an excellent cycle life (>500,000 cycles). All these properties are a result of the energy storage process of EDLCs, which relies on storing energy by charge separation instead of chemical redox reactions, as utilized in battery systems. Upon charging, double layers are forming at the electrode/electrolyte interface consisting of the electrolyte’s ions and electric charges at the electrode surface.In state-of-the-art EDLC systems activated carbons (AC) are used as active materials and tetraethylammonium tetrafluoroborate ([Et4N][BF4]) dissolved in organic solvents like propylene carbonate (PC) or acetonitrile (ACN) are commonly used as the electrolyte [2]. These combinations of materials allow operative voltages up to 2.7 V - 2.8 V and an energy in the order of 5 Wh·kg-1[3]. The energy of EDLCs is dependent on the square of the operative voltage, thus increasing the usable operative voltage has a strong effect on the delivered energy of the device [1]. Due to their high electrochemical stability, ionic liquids (ILs) were thoroughly investigated as electrolytes for EDLCs, as well as, batteries, enabling high operating voltages as high as 3.2 V - 3.5 V for the former [2]. While their unique ionic structure allows the usage of neat ILs as electrolyte in EDLCs, ILs suffer from low conductivity and high viscosity increasing the intrinsic resistance and, as a result, a lower power output of the device. In order to overcome this issue, the usage of blends of ionic liquids and organic solvents has been considered a feasible strategy as they combine high usable voltages, while still retaining good transport properties at the same time.In our recent work the ionic liquid 1-butyl-1-methylpyrrolidinium bis{(trifluoromethyl)sulfonyl}imide ([Pyrr14][TFSI]) was combined with two nitrile-based organic solvents, namely butyronitrile (BTN) and adiponitrile (ADN), and the resulting blends were investing regarding their usage in electrochemical double layer capacitors [4,5]. Firstly, the physicochemical properties were investigated, showing good transport properties for both blends, which are similar to the state-of-the-art combination of [Et4N][BF4] in PC. Secondly, the electrochemical properties for EDLC application were studied in depth revealing a high electrochemical stability with a maximum operative voltage as high as 3.7 V. In full cells these high voltage organic solvent based electrolytes have a good performance in terms of capacitance and an acceptable equivalent series resistance at cut-off voltages of 3.2 and 3.5 V. However, long term stability tests by float testing revealed stability issues when using a maximum voltage of 3.5 V for prolonged time, whereas at 3.2 V no such issues are observed (Fig. 1).Considering the obtained results, the usage of ADN and BTN blends with [Pyrr14][TFSI] in EDLCs appears to be an interesting alternative to state-of-the-art organic solvent based electrolytes, allowing the usage of higher maximum operative voltages while having similar transport properties to 1 mol∙dm-3 [Et4N][BF4] in PC at the same time.

Synthesis, Characterization and Properties of Conductive Elastomeric Composites Based on Polypyrrole and Short Nylon-6 Fiber

The search for new materials especially those possessing special properties continues at a great pace because of ever growing demands of the modern life. The focus on the use of intrinsically conductive polymers in organic electronic devices has led to the development of a totally new class of smart materials. Polypyrrole (PPy) is one of the most stable known conducting polymers and also one of the easiest to synthesize. In addition, its high conductivity, good redox reversibility and excellent microwave absorbing characteristics have led to the existence of wide and diversified applications for PPy. However, as any conjugated conducting polymer, PPy lacks processability, flexibility and strength which are essential for industrial requirements. Among various approaches to making tractable materials based on PPy, incorporating PPy within an electrically insulating polymer appears to be a promising method, and this has triggered the development of blends or composites. Conductive elastomeric composites of polypyrrole are important in that they are composite materials suitable for devices where flexibility is an important parameter. Moreover these composites can be moulded into complex shapes.

Designing and Developing Digital and Blended Learning Solutions

Chapter 6 concerns ‘Designing and developing digital and blended learning solutions’, however, despite its title, it is not aimed at developing L&D professionals to be technologists (in so much as how Chapter 3 is not aimed at developing L&D professionals to be accounting and financial experts). Chapter 6 is about developing L&D professionals to be technology savvy. In doing so, I adopt a culinary analogy in presenting this chapter, where the most important factors in creating a dish (e.g. blended learning), are the ingredients and the flavour each of it brings. The chapter first explores the typical technologies and technology products that are available for learning and development i.e. the ingredients. I then introduce the data Format, Interactivity/ Immersion, Timing, Content (creation and curation), Connectivity and Administration (FITCCA) framework, that helps L&D professionals to look beyond the labels of technologies in identifying what the technology offers, its functions and features, which is analogous to the ‘flavours’ of the ingredients. The next section discusses some multimedia principles that are important for L&D professionals to consider in designing and developing digital learning solutions. Finally, whilst there are innumerable permutations of blended learning, this section focuses on the typical emphasis in blended learning and how technology may support such blends.

Mécanisme de salissage et de nettoyage en surface de matériaux polymères

Résumé: Le développement de l’industrie des polymères fourni de plus en plus de choix pour la formulation de matériaux pour les couvre-planchers. Les caoutchoucs, le PVC et le linoleum sont les polymères habituellement utilisés dans l’industrie des couvre-planchers. Ce projet répond à un problème de facilité de nettoyage des couvre-planchers de caoutchouc qui sont reconnus pour être mous, collants et ayant une surface rugueuse. L’INTRODUCTION couvrira l’état actuel de la recherche sur les couvre-planchers, surtout en regard au problème de la «nettoyabilité». La théorie pertinente et les informations générales sur les polymères, les composites polymériques et la science des surfaces seront introduites au CHAPITRE 1. Ensuite, le CHAPITRE 2 couvrira la méthode utilisée pour déterminer la nettoyabilité, l’évaluation des résultats ainsi que l’équipement utilise. Le CHAPITRE 3, discutera des premières expériences sur l’effet de la mouillabilité, la rugosité et la dureté sur la facilité de nettoyage des polymères purs. Plusieurs polymères ayant des surfaces plus ou moins hydrophobes seront investigués afin d’observer leur effet sur la nettoyabilité. L’effet de la rugosité sur la nettoyabilité sera investigué en imprimant une rugosité définie lors du moulage des échantillons; l’influence de la dureté sera également étudiée. Ensuite, un modèle de salissage/nettoyage sera établi à partir de nos résultats et observations afin de rationaliser les facteurs, ou « règles », qui détrminent la facilité de nettoyage des surfaces. Finalement, la réticulation au peroxyde sera étudiée comme une méthode de modification des polymères dans le but d’améliorer leur nettoyabilité; un mécanisme découlant des résultats de ces études sera présenté. Le CHAPITRE 4 étendra cette recherche aux mélanges de polymères; ces derniers servent habituellement à optimiser la performance des polymères purs. Dans ce chapitre, les mêmes tests discutés dans le CHAPITRE 3 seront utilisés pour vérifier le modèle de nettoyabilité établi ci-haut. De plus, l’influence de la non-miscibilité des mélanges de polymères sera discutée du point de vue de la thermodynamique (DSC) et de la morphologie (MEB). L’utilisation de la réticulation par peroxyde sera étudié dans les mélanges EPDM/ (E-ran-MAA(Zn)-ran-BuMA) afin d’améliorer la compatibilité de ces polymères. Les effets du dosage en agent de réticulation et du temps de cuisson seront également examinés. Finalement, un compatibilisant pré-réticulé a été développé pour les mélanges ternaires EPDM/ (E-ran-MAA(Zn)-ran-BuMA)/ HSR; son effet sur la nettoyabilité et sur la morphologie du mélange sera exposé.

Experimental viscosity measurements of biodiesels at high pressure

The viscosity of biodiesels of soybean and rapeseed biodiesels blended with mineral diesel fuel were measured at pressures of up to 200 MPa. Using a falling sinker-type viscometer reproducible viscosity data were obtained based on the time taken for a sinker to descend a fixed distance down an enclosed tube under the influence of gravity. Measurements were taken using pressures which correspond to those of interest in automotive common rail diesel engines, and at temperatures of between 25oC and 80oC. In all cases, the viscosity of the biodiesel blends were found to increase exponentially for which the blends were noted as being more viscous than pure mineral fuels. A pressure-freezing effect was not observed for the blends.

Cooperative Design, Cooperative Science: Investigating Collaborative Research through Design with Floracaching

This dissertation presents a case study of collaborative research through design with Floracaching, a gamified mobile application for citizen science biodiversity data collection. One contribution of this study is the articulation of collaborative research through design (CRtD), an approach that blends cooperative design approaches with the research through design methodology (RtD). Collaborative research through design is thus defined as an iterative process of cooperative design, where the collaborative vision of an ideal state is embedded in a design. Applying collaborative research through design with Floracaching illustrates how a number of cooperative techniques—especially contextual inquiry, prototyping, and focus groups—may be applied in a research through design setting. Four suggestions for collaborative research through design (recruit from a range of relevant backgrounds; take flexibility as a goal; enable independence and agency; and, choose techniques that support agreement or consensus) are offered to help others who wish to experiment with this new approach. Applying collaborative research through design to Floracaching yielded a new prototype of the application, accompanied by design annotations in the form of framing constructs for designing to support mobile, place-based citizen science activities. The prototype and framing constructs, which may inform other designers of similar citizen science technologies, are a second contribution of this research.

Effect of citrus peel chemicals on Bactrocera tryonilarval survival

Queensland fruit fly, Bactrocera tryoni (Froggatt) (Diptera: Tephritidae) is a major horticultural insect pest in Australia which significantly limits domestic and international market access for Australian horticultural produce. Citrus is one of the industries seriously affected by the fruit fly problem in Australia. This research investigated the effect of citrus peel essential oil chemicals on B. tryoni larval survival in five different commercially important Citrus species and cultivars as a way of better understanding fruit susceptibility. The fruits used were Murcott Mandarin, Navel orange, Eureka lemon, Valencia orange and yellow grapefruit. The essential oils of each citrus type were extracted using hydrodistillation and then mixed, at different concentrations, with artificial larval diets to which B. tryoni eggs were added. Surviving larvae were counted after five trial days. The same process was repeated for six essential oil components. Regression analysis of increasing oil concentration against larval survival showed that the crude oil blends of Navel orange, Eureka lemon and yellow grapefruit had significant negative effects on B. tryoni larval survival, but no such effects were seen for Murcott Mandarin and Valencia orange. Of the individual essential oil fractions, only D-limonene had a significant effect on B. tryoni larval survival, with this chemical being highly toxic at very low concentrations. The results of this study open up opportunities for incorporating B. tryoni resistance mechanisms into citrus through minor peel property changes which would not impact on the eating attributes of the fruit.

Applications for nanomaterials in critical technologies

This thesis is devoted to the development, synthesis, properties, and applications of nano materials for critical technologies, including three areas: (1) Microbial contamination of drinking water is a serious problem of global significance. About 51% of the waterborne disease outbreaks in the United States can be attributed to contaminated ground water. Development of metal oxide nanoparticles, as viricidal materials is of technological and fundamental scientific importance. Nanoparticles with high surface areas and ultra small particle sizes have dramatically enhanced efficiency and capacity of virus inactivation, which cannot be achieved by their bulk counterparts. A series of metal oxide nanoparticles, such as iron oxide nanoparticles, zinc oxide nanoparticles and iron oxide-silver nanoparticles, coated on fiber substrates was developed in this research for evaluation of their viricidal activity. We also carried out XRD, TEM, SEM, XPS, surface area measurements, and zeta potential of these nanoparticles. MS2 virus inactivation experiments showed that these metal oxide nanoparticle coated fibers were extremely powerful viricidal materials. Results from this research suggest that zinc oxide nanoparticles with diameter of 3.5 nm, showing an isoelectric point (IEP) at 9.0, were well dispersed on fiberglass. These fibers offer an increase in capacity by orders of magnitude over all other materials. Compared to iron oxide nanoparticles, zinc oxide nanoparticles didn’t show an improvement in inactivation kinetics but inactivation capacities did increase by two orders of magnitude to 99.99%. Furthermore, zinc oxide nanoparticles have higher affinity to viruses than the iron oxide nanoparticles in presence of competing ions. The advantages of zinc oxide depend on high surface charge density, small nanoparticle sizes and capabilities of generating reactive oxygen species. The research at its present stage of development appears to offer the best avenue to remove viruses from water. Without additional chemicals and energy input, this system can be implemented by both points of use (POU) and large-scale use water treatment technology, which will have a significant impact on the water purification industry. (2) A new family of aliphatic polyester lubricants has been developed for use in micro-electromechanical systems (MEMS), specifically for hard disk drives that operate at high spindle speeds (>15000rpm). Our program was initiated to address current problems with spin-off of the perfluoroether (PFPE) lubricants. The new polyester lubricant appears to alleviate spin-off problems and at the same time improves the chemical and thermal stability. This new system provides a low cost alternative to PFPE along with improved adhesion to the substrates. In addition, it displays a much lower viscosity, which may be of importance to stiction related problems. The synthetic route is readily scalable in case additional interest emerges in other areas including small motors. (3) The demand for increased signal transmission speed and device density for the next generation of multilevel integrated circuits has placed stringent demands on materials performance. Currently, integration of the ultra low-k materials in dual Damascene processing requires chemical mechanical polishing (CMP) to planarize the copper. Unfortunately, none of the commercially proposed dielectric candidates display the desired mechanical and thermal properties for successful CMP. A new polydiacetylene thermosetting polymer (DEB-TEB), which displays a low dielectric constant (low-k) of 2.7, was recently developed. This novel material appears to offer the only avenue for designing an ultra low k dielectric (1.85k), which can still display the desired modulus (7.7Gpa) and hardness (2.0Gpa) sufficient to withstand the process of CMP. We focused on further characterization of the thermal properties of spin-on poly (DEB-TEB) ultra-thin film. These include the coefficient of thermal expansion (CTE), biaxial thermal stress, and thermal conductivity. Thus the CTE is 2.0*10-5K-1 in the perpendicular direction and 8.0*10-6 K-1 in the planar direction. The low CTE provides a better match to the Si substrate which minimizes interfacial stress and greatly enhances the reliability of the microprocessors. Initial experiments with oxygen plasma etching suggest a high probability of success for achieving vertical profiles.

Economic Development of Urban Areas

In this dissertation I study the development of urban areas. At the aggregate level I investigate how they may be affected by climate change policies and by being designated the seat of governmental power. At the household level I study with coauthors how microfinance could improve the health of urban residents. In Chapter 1, I investigate how local employment may be affected by electricity price increases, which is a likely consequence of climate change policies. I outline how previous studies that find large, negative effects may be biased. To overcome these biases I develop a novel estimation strategy that blends border-pair regressions with the synthetic control methodology. I show the conditions for consistent estimation. Using this estimator, I find no effect of contemporaneous price changes on employment. Consistent with the longer time-frame for manufacturing decisions, I do find evidence for negative effects from perceived permanent price shocks. These estimates are much smaller than previous research has found. National capital cities are often substantially larger than other cities in their countries. In Chapter 2, I investigate whether there is a causal effect from being a capital by studying the 1960 relocation of the Brazilian capital from Rio de Janeiro to Brasília. Using a synthetic controls strategy I find that losing the capital had no significant effects on Rio de Janeiro in terms of population, employment, or gross domestic product (GDP). I find that Brasília experienced large and significant increases in population, employment, and GDP. I find evidence of large spillovers from the public to the private sector. Chapter 3 investigates how microfinance could increase the uptake of costly health goods. We study the effect of time payments (micro-loans or micro-savings) on willingness-to-pay (WTP) for a water filter among households in the slums of Dhaka, Bangladesh. We find that time payments significantly increase WTP: compared to a lump-sum up-front purchase, median WTP increases 83% with a six-month loan and 115% with a 12-month loan. We find that households are quite patient with respect to consumption of health inputs. We find evidence for the presence of credit and savings constraints.

Produção de biodiesel de blendas dos óleos de mamona e arroz em escala piloto

A utilização do óleo de mamona como matéria-prima para produção de biodiesel mostra-se inviável na combustão interna do motor devido sua natureza química incomum que lhe confere especificações acima do permitido nas especificações técnicas da legislação nacional brasileira. Desta forma, a blenda com óleo de arroz refinado (OM:OA) qualifica o biodiesel atendendo a legislação nacional, além de corrigir a elevada acidez do óleo bruto de mamona prejudicial ao processo de transesterificação homogênea básica. No presente estudo realizou-se a produção de biodiesel etílico em escala piloto a partir de blendas de óleo bruto de mamona e óleo refinado de arroz em dois processos: o primeiro processo adotando a mistura direta dos dois óleos e o segundo processo pela esterificação antecipada do óleo bruto de mamona. Ambos os processos foram aplicados visando tanto definir os critérios de processo (acidez inicial) quanto o cumprimento das especificações técnicas (viscosidade e densidade). A produção em escala piloto (200 litros/batelada) foi realizada na Usina Demonstrativa para Produção de Biodiesel – BIOSUL (Edital FINEP, 2005) da Universidade Federal do Rio Grande - FURG utilizando em ambos os processos transesterificação, com hidróxido de sódio, e esterificação com ácido sulfúrico. Os processos apresentaram resultados satisfatórios, sendo o processo de mistura direta (Processo A) o que obteve melhores rendimentos (94,04%, blenda 20:80) enquanto que o processo de pré- esterificação (Processo B) foi aquele que proporcionou a maior fração de óleo de mamona na blenda (80,36%, 33:67). Os resultados para o Processo A de glicerol livre, monoacilgliceróis, diacilgliceróis, triacilgliceróis e de glicerol total foram, respectivamente, de 1,322 %, 6,092 %, 1,000 %, 0,884 e 3,152%. Neste estudo foi comprovada a viabilidade do processamento, em batelada, de blendas dos óleos de mamona e arroz. O óleo de mamona bruto pode ser utilizado em até 30% produzindo biodiesel dentro da legislação, verificando-se assim a viabilidade do uso da mamona na produção de biocombustíveis.

Estudo da síntese do biodiesel etílico utilizando misturas de óleos mamona/soja em diferentes proporções

No presente trabalho foi utilizado o processo de produção de biodiesel a partir da transesterificação de blendas de óleo de mamona e soja com etanol empregando-se como catalisador NaOH e posterior adição de H2SO4 para a neutralização do catalisador, visando a quebra de sabões e a melhor separação do biodiesel de seus co-produtos. Foi investigada a reação de transesterificação em blendas de óleo de mamona:soja nas proporções de 10:90, 20:80, 30:70, 40:60, 50:50, 60:40, 70:30, 80:20 e 90:10, sendo que as proporções que apresentaram melhores rendimentos foram 30:70, 60:40 e 80:20. O biodiesel obtido das blendas como melhor rendimento foram submetidos a medições viscosimétricas, sendo a proporção 30:70 a que apresentou a viscosidade mais próxima à especificada pela ANP (6,12 mm2 /s). O biodiesel etílico produzido com a blenda 30:70 obtido na transesterificação foi submetido a esterificação para diminuir o índice de acidez, utilizando H2SO4 como catalisador em concentrações de 5% e 10% em relação a massa de ácidos graxos livres, com álcool etílico numa razão molar de 60:1 e 80:1 álcool:ácido graxo. Para a reação de transesterificação, também foi estudada, a influência da concentração do catalisador no rendimento de biodiesel etílico e na formação de sabão. A quantidade de sabão formado no processo variou de 5,70% a 9,54% para 1% a 2% de catalisador, respectivamente.

Síntese e caracterização de biodiesel metílico e etílico a partir de blendas dos óleos de tungue e de soja

No presente trabalho foi investigada a transesterificação de blendas dos óleos de soja e de tungue com metanol ou etanol empregando catalisador alcalino (NaOH ou KOH). Foi investigado o tempo reacional, a proporção da blenda, a concentração e o tipo de catalisador, tipo de álcool e razão molar, temperatura e metodologia empregada no tratamento da reação. Nas reações com metanol obtiveram-se melhores conversões com tempo reacional de 1,5h; temperatura de 60°C; proporção blenda dos óleos de soja e de tungue de 90:10 (m/m); concentração de NaOH de 0,5% em relação a massa da blenda e razão molar metanol:blenda de 6:1. O tratamento dos ésteres metílicos produzidos na reação foi realizado por lavagem com água a 60°C após o processo de decantação das fases, metodologia C. O rendimento de ésteres metílicos foi superior a 96% e, o teor de mono-, di- e triacilglicerídeos, glicerol livre e total ficou abaixo dos limites estabelecidos pela ANP, indicando boa conversão (> 96,5%). Nas reações com etanol verificou-se que as melhores condições reacionais foram com uma concentração de catalisador de 0,8% de NaOH em relação a massa da blenda, razão molar etanol:blenda de 9:1, tempo de 1,5h e temperatura de 60°C. O tratamento dos produtos da reação foi realizado por lavagem com água a 60°C após o processo de remoção do etanol e decantação das fases, metodologia D. A concentração do catalisador foi um fator determinante na separação das fases. Uma maior concentração de catalisador favorece a saponificação, dificultando a separação das fases e afetando o rendimento do biodiesel sintetizado, tanto para o metílico quanto o etílico. O índice de acidez, tanto para o biodiesel metílico como o etílico, para qualquer proporção da blenda dos óleos de soja e tungue, ficaram dentro das normas da ANP, com valores abaixo de 0,5 mg.g-1 de KOH.