Toxicokinetics and toxicological effects of single oral dose of fumonisin B1 containing Fusarium verticillioides culture material in weaned piglets

Toxicokinetics and the toxicological effects of culture material containing fumonisin B(1) (FB(1)) were studied in male weaned piglets by clinical, pathological, biochemical and sphingolipid analyses. The animals received a single oral dose of 5 mg FB(1)/kg of body weight. obtained from Fusarium verticillioides culture material. FB(1) was detected by H PLC in plasma collected at 1-h intervals up to 6 h and at 12-h intervals up to 96 h. FB(1) eliminated in feces and urine was quantified over a 96-h period and in liver samples collected 96 h post-intoxication. Blood samples were obtained at the beginning and end of the experiment to determine serum enzyme activity, total bilirubin, cholesterol, sphinganine (Sa), sphingosine (So) and the Sa/So ratio. FB(1) was detected in plasma between 30 min and 36 h after administration. The highest concentration of FB(1) was observed after 2 h, with a mean concentration of 282 mu g/ml. Only 0.93% of the total FB(1) was detected in urine between 75 min and 41 h after administration, the highest mean concentration (561 mu g/ml) was observed during the interval after 8 at 24 h. Approximately 76.5% of FB(1) was detected in feces eliminated between 8 and 84 h after administration, with the highest levels observed between 8 and 24 h. Considering the biochemical parameters, a significant increase only occurred in cholesterol, alkaline phosphatase and aspartate aminotransferase activities. In plasma and urine, the highest Sa and Sa/So ratios were obtained at 12 and 48 h, respectively. (C) 2010 Elsevier Ireland Ltd. All rights reserved.

A quantitative TaqMan PCR assay for the detection of Mycoplasma suis

Aim: To develop a TaqMan probe-based, highly sensitive and specific quantitative PCR (qPCR) assay for the detection and quantification of Mycoplasma suis in the blood of pigs. Methods and Results: Primers and probes specific to Myc. suis 16S rRNA gene were designed. The qPCR assay`s specificity, detection limit, intra- and inter-assay variability were evaluated and its performance was compared with a Myc. suis conventional PCR assay (cPCR). Blood of two experimentally infected pigs, 40 Indiana pigs, 40 Brazilian sows and 28 peccaries were tested. The assay detected as few as ten copies of Myc. suis plasmids and was 100-fold more sensitive than the cPCR. No cross-reactivity with nontarget pig mycoplasmas was observed. An average of 1.62 x 10(11) and 2.75 x 10(8) target copies ml(-1) of blood were detected in the acutely and chronically infected pigs, respectively. Three (7.5%) pigs and 32 (80.0%) sows were positive while all peccaries were negative for Myc. suis. Conclusion: The developed qPCR assay is highly sensitive and specific for Myc. suis detection and quantification. Significance and Impact of the Study: TaqMan qPCR is an accurate and quick test for detection of Myc. suis infected pigs, which can be used on varied instrumentation platforms.

A method for Ca, Fe, Ga, Na, Si and Zn determination in alumina by inductively coupled plasma optical emission spectrometry after aluminum precipitation

In this present work a method for the determination of Ca, Fe, Ga, Na, Si and Zn in alumina (Al(2)O(3)) by inductively coupled plasma optical emission spectrometry (ICP OES) with axial viewing is presented. Preliminary studies revealed intense aluminum spectral interference over the majority of elements and reaction between aluminum and quartz to form aluminosilicate, reducing drastically the lifetime of the torch. To overcome these problems alumina samples (250 mg) were dissolved with 5 mL HCl + 1.5 mLH(2)SO(4) + 1.5 mL H(2)O in a microwave oven. After complete dissolution the volume was completed to 20 mL and aluminum was precipitated as Al(OH)(3) with NH(3) (by bubbling NH(3) into the solution up to a pH similar to 8, for 10 min). The use of internal standards (Fe/Be, Ga/Dy, Zn/In and Na/Sc) was essential to obtain precise and accurate results. The reliability of the proposed method was checked by analysis of alumina certified reference material (Alumina Reduction Grade-699, NIST). The found concentrations (0.037%w(-1) CaO, 0.013% w w(-1) Fe(2)O(3), 0.012%w w(-1)Ga(2)O(3), 0.49% w w(-1) Na(2)O, 0.014% w w(-1) SiO(2) and 0.013% w w(-1) ZnO) presented no statistical differences compared to the certified values at a 95% confidence level. (C) 2011 Elsevier B.V. All rights reserved.

Feasibility study for the preparation of a tuna fish candidate reference material for total As determination

This work describes the evaluation of several parameters for the preparation of a tuna fish candidate as a reference material (RM) in order to measure the total As mass fraction by slurry sampling graphite furnace atomic absorption spectrometry (SLS-GF AAS) and slurry sampling hydride generation atomic absorption spectrometry (SLS-HG AAS). The main parameters investigated were the homogeneity, analyte segregation and composition during material production. For candidate RM preparation, tuna fish was collected at a local market, cleaned, freeze-dried and treated using different procedures as follows: (1) ground in a cutting mill and separated in different particle sizes (2) ground in cryogenic mill. The mass fraction of As in the cryogenically ground sample was (4.77 +/- A 0.19) mu g g(-1) for SLS-GF AAS and (4.61 +/- A 0.34) mu g g(-1) for SLS-HG AAS. The accuracy of the procedures was checked with tuna fish certified reference material (BCR 627) with recoveries of 102 and 94% for SLS-GF AAS and SLS-HG AAS, respectively. The homogeneity factor was calculated for different pretreatment procedures and for particle sizes in the range of 500-150 mu g, indicating good homogeneity, except for raw fish. There was no observed analyte segregation and no losses, no contamination and no changes in the microdistribution of material during preparation.

Effect of Calcium Pre-rinse and Fluoride Dentifrice on Enamel and on Dental Plaque Formed In Situ

Purpose: The aim of this in situ double-blind randomised crossover study was to investigate the effect of calcium (Ca) pre-rinse on the composition of plaque and on enamel prior to the use of fluoride (F) dentifrice. Materials and Methods: During four phases (14 days each) of this study, 10 volunteers had agreed to wear dental appliances containing two healthy bovine enamel blocks. A fresh solution containing 20% weight/volume (w/v) sucrose was dripped on the enamel blocks ex vivo for 5 min three times a day. Subsequently, the appliances were replaced in the mouth, and the volunteers rinsed their mouth with 10 mL of a Ca (150 mmol/L) or a placebo rinse (1 min). In sequence, a slurry (1:3 w/v) of F (1030 ppm) or placebo dentifrice was dripped onto the blocks ex vivo for 1 min. During this time, the volunteers brushed their teeth with the respective dentifrice. The appliances were replaced in the mouth, and the volunteers rinsed their mouth with water. The plaque formed on the blocks was analysed for F and Ca. The enamel demineralisation as well as the incorporation of F on enamel was evaluated by cross-sectional microhardness and alkali-soluble F analysis, respectively. Data were tested using analysis of variance (P < 0.05). Results: The Ca pre-rinse prior to the use of the F dentifrice led to a three- and sixfold increase in the plaque F and Ca concentrations, respectively. It also did not have any additive effect on the F content on the enamel and the demineralisation of the enamel, in comparison with the use of F dentifrice alone. Conclusions: A Ca lactate rinse used prior to the F dentifrice was able to change the mineral content in the plaque, but it was unable to prevent enamel demineralisation.

Keratinocyte growth factor: a new mesothelial targeted therapy to reduce postoperative pericardial adhesions

Background: Several methods have been utilized to prevent pericardial and retrosternal adhesions, but none of them evaluated the mesothelial regenerative hypothesis. There are evidences that the mesothelial trauma reduces pericardial fibrinolytic capability and induces an adhesion process. Keratinocyte growth factor (KGF) has proven to improve mesothelial cells proliferation. This study investigated the influence of keratinocyte growth factor in reducing post-surgical adhesions. Methods: Twelve pigs were operated and an adhesion protocol was employed. Following a stratified randomization, the animals received a topical application of KGF or saline. At 8 weeks, intrapericardial adhesions were evaluated and a severity score was established. The time spent to dissect the adhesions and the amount of sharp dissection used, were recorded. Histological sections were stained with sirius red and morphometric analyses were assessed with a computer-assisted image analysis system. Results: The severity score was lower in the KGF group than in the control group (11.5 vs 17, p = 0.005). The dissection time was lower in the KGF group (9.2 +/- 1.4 min vs 33.9 +/- 9.2 min, p = 0.004) and presented a significant correlation with the severity score (r = 0.83, p = 0.001). A significantly less sharp dissection was also required in the KGF group. Also, adhesion area and adhesion collagen were significantly tower in the KGF group than in the control group. Conclusion: The simulation of pericardial cells with KGF reduced the intensity of postoperative adhesions and facilitated the re-operation. This study suggests that the mesothelial regeneration is the new horizon in anti-adhesion therapies. (C) 2008 European Association for Cardio-Thoracic Surgery. Published by Elsevier B.V. All rights reserved.

Photocatalytic decolorization of lanasol blue CE dye solution using a flat-plate reactor

This paper reports the effectiveness of the photocatalysis TiO₂ in degrading Lanasol Blue CE. A flat-plate reactor (FPR) with a reactor area of 0.37 m² and ultraviolet (UV) light source of six 36 W blacklight lamps was used in the study. Operating variables including dosage of the photocatalyst, flow rates through the FPR, UV intensity, and tilted angle of the reactor were investigated to degrade Lanasol Blue CE. Results showed that the photocatalytic process can efficiently remove the color in textile dyeing effluent. The degradation process was approximated using first-order kinetics. The photocatalytic apparent reaction rate increased with the increasing UV intensity received by the photocatalyst TiO₂ in slurry. The liquid flow rate and tilted angle influenced the film thickness. The apparent reaction rate constant was mainly determined by the liquid film thickness, UV intensity, and the dosage of the photocatalyst. The findings of this research can be utilized as preliminary input for potential solar photocatalytic applications on color removal from dye solutions.

The relative absorption of fatty acids in brown trout (Salmo trutta) fed a commercial extruded pellet coated with different lipid sources

The objective of the present study was to investigate the fatty acid absorption capabilities of brown trout (Salmo trutta) fed commercial extruded diets. Five commercial extruded pellets, different only in the lipid sources used for fat coating, were tested on juvenile brown trout for 45 days. The trout were reared in fresh water at 14.6 ± 0.4° C and 7.7 ±
0.3 mg/l, temperature and dissolved oxygen, respectively. The tested lipid sources were fish oil, canola oil, oleine oil, swine fat and poultry fat. After the adaptation period faeces were collected by gently stripping from naesthetized fish. Fatty acid analysis was performed on experimental diets and on collected faeces to evaluate the relative absorption capabilities of the trout digestive system with respect to each detected fatty acid. The use of the relative absorption efficiency (rAE) was opted to evaluate the intrinsic capability of each fatty acid to be absorbed. Brown trout showed a
specific preferential order of absorption of the fatty acids, preferring shorter over longer chain fatty acids and preferring the more unsaturated to the more saturated fatty acids. The fatty acid that showed the best relative absorbability was the C18:4n-3 (rAE = 5.14 ± 0.72), which has a fairly short carbon chain, but at the same time a high unsaturation level, followed by the C18:3n-3 (rAE = 3.38 ± 0.30). The fatty acid that showed the worst relative absorbability (rAE = 0.21 ± 0.02) was C24:1n-9.

Effect of cage colour and light environment on the skin colour of Australian Snapper Pagrus auratus (Bloch & Schneider, 1801)

A two-factor experiment was performed to evaluate the effects of cage colour (black or white 0.5 m³ experiment cages) and light environment (natural sunlight or reduced level of natural sunlight) on the skin colour of darkened Australian snapper. Each treatment was replicated four times and each replicate cage was stocked with five snapper (mean weight=351 g). Snapper exposed to natural sunlight were held in experimental cages located in outdoor tanks. An approximately 70% reduction in natural sunlight (measured as PAR) was established by holding snapper in experimental cages that were housed inside a 'shade-house' enclosure. The skin colour of anaesthetized fish was measured at stocking and after a 2-, 7- and 14-day exposure using a digital chroma-meter (Minolta CR-10) that quantified skin colour according to the L*a*b* colour space. At the conclusion of the experiment, fish were killed in salt water ice slurry and post-mortem skin colour was quantified after 0.75, 6 and 22 h respectively. In addition to these trials, an ad hoc market appraisal of chilled snapper (mean weight=409 g) that had been held in either white or in black cages was conducted at two local fish markets. Irrespective of the sampling time, skin lightness (L*) was significantly affected by cage colour (P<0.05), with fish in white cages having much higher L* values (L*≈64) than fish held in black cages (L*≈49). However, the value of L* was not significantly affected by the light environment or the interaction between cage colour and the light environment. In general, the L* values of anaesthetized snapper were sustained post mortem, but there were linear reductions in the a* (red) and b* (yellow) skin colour values of chilled snapper over time. According to the commercial buyers interviewed, chilled snapper that had been reared for a short period of time in white cages could demand a premium of 10–50% above the prices paid for similar-sized snapper reared in black cages. Our results demonstrate that short-term use of white cages can reduce the dark skin colour of farmed snapper, potentially improving the profitability of snapper farming.

Cage colour and post-harvest K+ concentration affect skin colour of Australian snapper Pagrus auratus (Bloch & Schneider, 1801)

In an attempt to improve post-harvest skin colour in cultured Australian snapper Pagrus auratus, a two-factor experiment was carried out to investigate the effects of a short-term change in cage colour before harvest, followed by immersion in K⁺-enriched solutions of different concentrations. Snapper supplemented with 39 mg unesterified astaxanthin kg⁻¹ for 50 days were transferred to black (for 1 day) or white cages (for 1 or 7 days) before euthanasia by immersing fish in seawater ice slurries supplemented with 0, 150, 300, 450 or 600 mmol L⁻¹ K⁺ for 1 h. Each treatment was replicated with five snapper (mean weight=838 g) held individually within 0.2 m³ cages. L*, a* and b* skin colour values of all fish were measured after removal from K⁺ solutions at 0, 3, 6, 12, 24 and 48 h. After immersion in K⁺ solutions, fish were stored on ice. Both cage colour and K⁺ concentration significantly affected post-harvest skin colour (P<0.05), and there was no interaction between these factors at any of the measurement times (P>0.05). Conditioning dark-coloured snapper in white surroundings for 1 day was sufficient to significantly improve skin lightness (L*) after death. Although there was no difference between skin lightness values for fish held for either 1 or 7 days in white cages at measurement times up to 12 h, fish held in white cages for 7 days had significantly higher L* values (i.e. they were lighter) after 24 and 48 h of storage on ice than those held only in white cages for 1 day. K⁺ treatment also affected (improved) skin lightness post harvest although not until 24 and 48 h after removal of fish from solutions. Before this time, K⁺ treatment had no effect on skin lightness. Snapper killed by seawater ice slurry darkened (lower L*) markedly during the first 3 h of storage in contrast with all K⁺ treatments that prevented darkening. After 24 and 48 h of storage on ice, fish exposed to 450 and 600 mmol L⁻¹ K⁺ were significantly lighter than fish from seawater ice slurries. In addition, skin redness (a*) and yellowness (b*) were strongly dependent on K⁺ concentration. The initial decline in response to K⁺ was overcome by a return of a* and b* values with time, most likely instigated by a redispersal of erythrosomes in skin erythrophores. Fish killed with 0 mmol L⁻¹ K⁺ maintained the highest a* and b* values after death, but were associated with darker (lower L*) skin colouration. It is concluded that a combination of conditioning snapper in white surroundings for 1 day before harvest, followed by immersion in seawater ice slurries supplemented with 300–450 mmol L⁻¹ K⁺ improves skin pigmentation after >24 h of storage on ice.

Thermal degradation of natural rubber/ZNO nanocomposites

Nanoparticies have been widely used to enhance the properties of natural rubber (NR). In the present paper a novel nanocomposite was developed by blending nano-ZnO slurry with prevulcanized NR latex, and the thermal degradation process of pure NR and NR/ZnO nanocomposites with different nano-ZnO loading was studied with a Perkin Elemer TGA-7 thermogravimetric analyzer. The thermal degradation parameters of NR/ZnO (2 parts ZnO per hundred dlY rubber) at different heating rates (Bs) were studied. The results show that the thermal degradation of pure NR and NR/ZnO nanocomposites in nitrogen is a one-step reaction. The degradation temperatures of NR/ZnO nanocomposite increase with an increasing B. The peak height (R_p) on the differential thermogravimetric curve increases with the increase of B. The degradation rates are not affected significantly by B, and the average values of thermal degradation rate C_p and C_f are 44.42 % and 81.04 %, respectively. The thermal degradation kinetic parameters are calculated with Ozawa-Flynn-Wall method. The activation energy (E) and the frequency factor (A) vary with ecomposition degree, and can be divided into three phases corresponding to the volatilization of low-molecular-weight materials, the thermal degradation ofNR main chains and the decomposition of residual carbon.

A gel-capture assay for characterizing the sialyl-glycan selectivity of influenza viruses

Sialic acids (SA) usually linked to galactose (Gal) in an α2,6- or α2,3-configuration are considered the main cell receptors for influenza viruses, in particular for their hemagglutinins (HA). The typing of influenza virus HA receptor selectivity is relevant for understanding the transmissibility of avian and swine viruses to the human population. In this study we developed a simple and inexpensive gel-capture assay (GCA) of the influenza virus HA receptor-binding selectivity. Its principle is the binding of soluble influenza virus to pentasaccharide analogs, representatives of receptors of human and avian influenza viruses, immobilized on a gel resin. The human and avian analogs consisted of a sialyllactose-N-tetraose c (LSTc) [Neu5Ac(α2,6)Gal(β1-3)GlcNAc(β1-3)Gal(β1-4)Glc] and a sialyllactose-N-tetraose a (LSTa) [Neu5Ac(α2,3)Gal(β1-3)GlcNAc(β1-3)Gal(β1-4)Glc], respectively. Following equilibration, the unbound virus is washed away and the bound one is assayed via HA by densitometry as a function of the analog concentration. Using GCA, the receptor selectivity of three influenza viruses of different HA subtype was investigated. The results showed that the egg-adapted A/California/07/2009 (H1N1) virus exhibited an avian α2,3-linked LSTa selectivity, however, it retained the ability to bind to the α2,6-linked LSTc human receptor analog. Influenza B virus B/Florida/4/2006 showed α2,6-linked LSTc selectivity and a poor α2,3-linked LSTa avidity. The H3N2 virus A/Wisconsin/15/2009 displayed almost comparable avidity for both receptor analogs with a marginally greater α2,3-linked LSTa avidity. The described assay protocol provides a simple and rapid method for the characterization of influenza virus HA receptor binding selectivity. Keywords: influenza virus; hemagglutinin; receptor; sialyllactose-N-tetraose; gel-capture assay.

A case study of ground response due to diaphragm wall installation

The purpose of this research is to investigate the ground response due to diaphragm wall construction using three-dimensional numerical modelling. In this study, the commercial finite difference method software, FLAC3D, and the finite element upper and lower bound limit analysis methods are employed. In addition, a range of factors are investigated. They include the dimensions of the single panel, overconsolidation ration (OCR), soil stiffness (E/su), and the height of the bentonite slurry. The solutions from the numerical upper bound limit analysis method are used for comparison purposes. The results obtained indicate that the above factors do have influence on ground response in terms of its stability and displacements. The discussion in the paper can be utilised as the reference for practical designs.

Trench stability under bentonite pressure in purely cohesive clay

Trench stability is a conventional geotechnical problem; however, current evaluations are often based entirely on empiricism. This paper uses numerical finite-element upper and lower bound limit analysis to produce stability charts for two-dimensional and three-dimensional homogeneous and inhomogeneous undrained diaphragm wall trenches. Using the limit theorems cannot only provide a simple and useful way of analyzing the stability of the trench, but also avoid the shortcomings and arbitrary assumptions underpinning the limit equilibrium method. By considering the effects from the bentonite slurry pressures, the collapse load in this study has been bracketed to within ±8.5 or better by the numerical upper and lower bound limit analyses. The chart solutions can be used to predict either the critical depth or the safety factor of the trench and provide a convenient tool for preliminary designs by practicing engineers. © 2014 American Society of Civil Engineers.