Revisiting a destination: A tourist’s choice model : A case study of Sweden

This paper documents the design and results of a study on tourists’ decision-making about destinations in Sweden. For this purpose, secondary data, available from surveys were used to identify which type of individual has the highest probability to revisit a destination and what are influencing factors to do so. A binary logit model is applied. The results show that very important influencing factors are the length of stay as well as the origin of the individual. These results could be useful for a marketing organization as well as for policy, to develop strategies to attract the most profitable tourism segment. Therefore, it can also be a great support for sustainable tourism development, where the main focus does not has priority on increasing number of tourists.

Gestão colegiada da cadeia produtiva da cajucultura: o papel do comitê gestor no Rio Grande do Norte à luz do desenvolvimento regional sustentável

The theme of this dissertation is the collegiate management in the cashew cultivation s productive chain by the reading of the Managerial Committee s role in accordance with Sustainable Regional Development. The research had as aim to reveal the way as Managerial Committee s members of cashew cultivation s productive chain interpret the economic, social and environmental dimensions to the sustainability of entrepreneurships, using as interpretative base Sachs (2004) theoretical model. The theoretical reference is based in precepts of Solidarity Economy as a strategy to the Sustainable Regional Development. To reach this aim was done a case study, based in analysis of contents and semi-structured interviews with the solidarities economic entrepreneurships that integrate the Committee and with the group of Entities of Support and Fomentation responsible for formulating and conducting actions in favour of development of the chain. The research permitted to conclude that the economic, mainly, and social dimension, secondly, to super-impose the environmental dimension. The actions in favour of the chain are yet restricted and with low effectiveness when interpreted, in an integrated way, by a side, by the informers of this research and, by another side, in accordance with precepts of sustainable development

Insufficient Evidence of Jatropha curcas L. Invasiveness: Experimental Observations in Burkina Faso, West Africa

Biofuel plants such as Jatropha curcas L. have potential to support the livelihoods of rural communities and contribute to sustainable rural development in Africa, if risks and uncertainties are minimized. Yet, recent papers have warned of the risk of biological invasions in such tropical regions as a consequence of the introduction of exotic biofuel crops. We investigated the seed dispersal risk and invasiveness potential of both J. curcas monoculture plantations and live fences into adjacent cultivated and uncultivated land use systems in Sissili province, Burkina Faso. Invasiveness potential was assessed through (i) detecting evidence of natural regeneration in perimeters around J. curcas plantations and live fences, (ii) assessing seed dispersal mechanisms, and (iii) assessing seedling establishment potential through in situ direct seed sowing. Spontaneous regeneration around the plantation perimeters of the three sites was very low. Individual seedling density around J. curcas live fences was less than 0.01 m⁻² in all sites. Seventy percent of the seedlings were found close to the live fence and most of them derived from the same year (96 %), which indicates low seed-bank longevity and seedling survival. J. curcas can be dispersed by small mammals and arthropods, particularly rodents and ants. In some sites, such as in Onliassan, high secondary seed dispersal by animals (up to 98 %) was recorded. There were highly significant differences in germination rates between seeds at the soil surface (11 %) and those buried artificially at 1–2-cm depth (64 %). In conclusion, we failed to find convincing evidence of the spreading of J. curcas or any significant impact on the surrounding environment.

Tuotteiston nykytila-analyysi ja kehitystoimenpiteiden kartoitus ohutlevytuotteita valmistavassa yrityksessä

Työn tavoitteena oli tutkia kohdeyrityksen tuotteiston nykytilaa ja antaa kehitysehdotus tuotteiston uudesta rakenteesta, jolla voidaan toteuttaa tehokasta sarjatuotantoa. Tutkimuksessa keskityttiin vakiotuotteista koostuvan tuotteiston analysointiin. Tarkastelun kohteeksi valittiin tuotteiston yksittäiset tuotenimikkeet, joita analysoitiin toteutuneiden myyntilukujen ja asiakashaastatteluista saatujen tietojen perusteella Työssä käytettiin tutkimusmenetelminä kirjallisuustutkimusta, teemahaastattelua ja tuotteiden myynti- ja käyttötilastojen tarkastelua. Tutkimuksen luotettavuutta lisäsi, kun käytettiin kolmen riippumattoman tutkimusta vahvistavan menetelmän yhdistämistä. Tutkimuksessa saavutettujen tulosten perusteella tuotteille tulisi kehittää uudet ohjausmenetelmät, jotka helpottavat tuotannon ja varaston hallintaa. Tuotteet, joilla ei ole ollut myyntiä, tulisi käydä yksityiskohtaisesti läpi ja tehdä arviointi niiden tarpeellisuudesta. Tuoterakenteita tulisi kehittää modulaarisemmaksi tehokkaampaa sarjatuotantoa ajatellen. Tuoteryhmissä olevat samankaltaiset tuotteet tulisi yhdistää, jolloin valikoimasta saataisiin yksinkertaisempi ja helpommin hallittava.

Aplicación y comparación de la metodología de diseño Top Down y Bottom Up

Este proyecto estudia y compara las metodologías Bottom Up y Top Down, utilizadas en el desarrollo de productos dentro de un departamento de manufactura en un ambiente colaborativo -- Se desarrolló un producto mediante ambas metodologías, posteriormente se analizó su incidencia en el comportamiento de indicadores de gestión, que miden el desempeño de una organización -- Se destacan también los beneficios del Top Down en la manufactura de grandes ensambles, tomando como ejemplo un torno

Perspective d'un développement rural durable : le cas des Hmongs du Laos

Résumé : Le développement durable est un processus d'évolution dans lequel toutes les ethnies coexistent en harmonie avec un environnement sain. Depuis une quarantaine d'années, le Laos a connu de nombreux bouleversements. Des groupes minoritaires, dont les Hmongs, ont subi les contrecoups des changements socio-politiques et économiques. Les Hmongs, qui habitent les régions montagneuses et qui pratiquent l'agriculture itinérante, sont particulièrement touchés par des inégalités économiques et sociales malgré la politique d'égalité ethnique. Les transformations progressives de leur méthode d'utilisation du sol, de leur mode de production et de leur mode de vie itinérants en sédentarisation durable deviennent fondamentales et cruciales. Les Hmongs défavorisés aspirent fortement à de meilleures conditions de vie tout comme les populations qui vivent dans les plaines. En effet, les Hmongs, qui habitent dans les régions de Lakhasipsong et de Longsan, province de Vientiane, s'adaptent aux nouvelles conditions de transformation socio-économique, soient la sédentarisation du mode de production et du mode de vie. On peut affirmer que le développement rural et communautaire permet la sédentarisation des Hmongs et que ces derniers sont aptes à s'adapter à la vie moderne. La méthode d'enquête par entrevue sur la base d'un sondage employée sur le terrain nous a permis de découvrir les caractéristiques de développement durable autant socio-économique que politique dans la province de Vientiane avec application particulière aux Hmongs. Les résultats de l'enquête démontrent que les stratégies de sédentarisation sans relocalisation et avec relocalisation sur l'initiative soit personnelle soit gouvernementale ont fait leurs preuves. Des changements dans les modes de production et de vie ont non seulement permis une meilleure utilisation du sol, une augmentation de la production et une amélioration des conditions de vie mais aussi une meilleure préservation de l'écosystème.||Abstract : Sustainable development is an evolutionary process in which all ethnie groups live in harmony with a healthy environment. For approximately forty years, Laos has been subjected to many disruptions. Minority groups, like the Hmong, have felt the full impact of the numerous socio-political and economic changes that took place in the country. The Hmong, in particular, who live in mountainous regions and practice slash and burn agriculture, have suffered from economic and social inequality policies praticed by previous governments. The progressive transformation of their methods of land use, their mode of production and their migrant life style must clearly be understood before any attempt at a sedentary life style with a view to a sustainable development be undertaken. The underprivileged Hmong aspire to better living conditions comparable to those of people living in the plains. More precisely, the Hmong, who live in Lakhasipsong and Longsan in the province of Vientiane, adapt to their new conditions of social and economic transformation by fixing into place their mode of production and their lifestyle. We can state that the rural community development taking place allows an effective sédentarisation for the Hmong and, that they are able to adapt themselves to modem life. The survey method by interview and randown sampling on the ground permits us to discover elements of farming development within the socio-economic as well as political life in Vientiane province with a particular application to the Hmong. The survey results in showing that settling down strategies without relocation or with relocation on personal or governmental initiative are truly operational. Changes in the mode of production and life style have not only permitted a better land use, an increased production and a better life style but also, a better conservation of the environment.

Identificação do potencial renovável para produção de electricidade na perspectiva da microgeração

Tese submetida à Universidade de Lisboa, Faculdade de Ciências e aprovada em provas públicas para a obtenção do Grau de Doutor em Energia e Ambiente (especialidade em Energia e Desenvolvimento Sustentável).

Research-based spin-offs as agents of knowledge dissemination: evidence from the analysis of innovation networks

The paper addresses the role played by research-based spin-offs (RBSOs) as knowledge dissemination mechanisms, through their position in knowledge networks. For this purpose the paper analyses the formal networks established by the Portuguese RBSOs in the context of publicly funded research, technology and pre-commercial product development projects, and investigates their configuration along two levels. At organisational level, in order to understand whether RBSOs extend their reach beyond the academic sphere; and if they do, whether they relate with similar firms or connect to organisations located downstream in the knowledge value chain, and which is their position in networks involving both research organisations and other firms. At spatial level, in order to understand whether RBSOs extend their reach beyond the region where they are created, thus potentially acting as connectors between diverse regions. The analysis starts from the population of RBSOs created in Portugal until 2007 (387) and identifies those that have established formal technological relationships as part of projects funded by all the programmes launched in the period 1993-2012. As a result, the analysis encompasses 192 collaborative projects and involves 82 spin-offs and 281 partners, of which only 20% are research organisations, the remaining being other firms and a variety of other user organisations. The results, although still preliminary, provide some insights into the knowledge networking behaviour of the RBSOs. As expected, research organisations are a central actor in spin-offs’ networks, being the sole partner for some of them. But half of the RBSOs have moved beyond the academic sphere, being frequently a central element in tripartite technological relationships between research and other organisations and occupying an intermediation position in the network, thus potentially acting as facilitators in knowledge circulation and transformation. Also as expected, RBSOs are predominantly located in the main metropolitan areas and tend to relate with organisations similarly located. But while geographical proximity emerges as important in the choice of partners, in about half of the cases, RBSOs knowledge networks have extended beyond regional boundaries. Given their central position in the network this suggests a role as connectors across regions that will be explored in subsequent research.

Research-based spin-offs as agents of knowledge dissemination: evidence from the analysis of innovation networks

The paper addresses the role played by research-based spin-offs (RBSOs) as knowledge dissemination mechanisms, through their position in knowledge networks. For this purpose the paper analyses the formal networks established by Portuguese RBSOs, in the context of publicly funded research, technology and pre-commercial product development projects, and investigates their configuration across two levels. At organisational level, in order to understand whether RBSOs extend their reach beyond the academic sphere; and if they do, whether they connect to organisations located downstream in the knowledge value chain, and which is their position in networks involving both research organisations and other firms. At spatial level, in order to understand whether RBSOs extend their reach beyond the region where they are created, thus potentially acting as connectors between diverse regions. The analysis starts from the population of RBSOs created in Portugal until 2007 (327 firms) and identifies those that have established formal technological relationships, as part of projects funded by all the relevant programmes launched in the period 1993-2012. As a result, the analysis encompasses 192 collaborative projects and involves 82 spin-offs and 281 partners, of which only 20% are research organisations, the remaining being other firms and a variety of other downstream organisations. The results, although still preliminary, provide some insights into the knowledge networking behaviour of the RBSOs. As expected, research organisations are a central actor in spin-offs’ networks, being the sole partner for some of them. But half of the RBSOs have moved beyond the academic sphere, being frequently a central element in tripartite technological relationships between research and other organisations, and occupying an intermediation position in the network, thus potentially acting as facilitators in knowledge circulation and transformation. Also as expected, RBSOs are predominantly located in the main metropolitan areas and tend to relate with organisations similarly located. But while geographical proximity emerges as important in the choice of partners, in about half of the cases, RBSOs knowledge networks have extended beyond regional boundaries. Given their central position in the network, this suggests a role as connectors across regions that will be explored in subsequent research.

Advanced Adhesion Strength Testing Methods of Thin Film Multilayers in Electronic Packaging Systems

With the continued miniaturization and increasing performance of electronic devices, new technical challenges have arisen. One such issue is delamination occurring at critical interfaces inside the device. This major reliability issue can occur during the manufacturing process or during normal use of the device. Proper evaluation of the adhesion strength of critical interfaces early in the product development cycle can help reduce reliability issues and time-to-market of the product. However, conventional adhesion strength testing is inherently limited in the face of package miniaturization, which brings about further technical challenges to quantify design integrity and reliability. Although there are many different interfaces in today's advanced electronic packages, they can be generalized into two main categories: 1) rigid to rigid connections with a thin flexible polymeric layer in between, or 2) a thin film membrane on a rigid structure. Knowing that every technique has its own advantages and disadvantages, multiple testing methods must be enhanced and developed to be able to accommodate all the interfaces encountered for emerging electronic packaging technologies. For evaluating the adhesion strength of high adhesion strength interfaces in thin multilayer structures a novel adhesion test configuration called “single cantilever adhesion test (SCAT)” is proposed and implemented for an epoxy molding compound (EMC) and photo solder resist (PSR) interface. The test method is then shown to be capable of comparing and selecting the stronger of two potential EMC/PSR material sets. Additionally, a theoretical approach for establishing the applicable testing domain for a four-point bending test method was presented. For evaluating polymeric films on rigid substrates, major testing challenges are encountered for reducing testing scatter and for factoring in the potentially degrading effect of environmental conditioning on the material properties of the film. An advanced blister test with predefined area test method was developed that considers an elasto-plastic analytical solution and implemented for a conformal coating used to prevent tin whisker growth. The advanced blister testing with predefined area test method was then extended by employing a numerical method for evaluating the adhesion strength when the polymer’s film properties are unknown.

Programa ciclovida como política de mobilidade urbana sustentável: estudo empírico na Universidade Federal do Paraná

The urban mobility has in the bicycle its symbol of the most environmentally sustainable modal of transportation of the planet, title conferred by the United Nations Organization (ONU). Nevertheless, the cities suffer with the traffic jam caused by the automobile fleet growth, what implies in a larger displacement time, injuries to the environment, to financials and to the quality of life. In order to build in a sustainable way the urban mobility, public policies are necessary to encourage the preferential usage, by the society, of the mass transit or the non-motorized type of transportation. Objecting cooperate with the public power and the civil society, this study intents to, through an analysis about the UFPR Extension Program - CICLOVIDA, propose a sustainable urban mobility public policy development, with emphasis in the bicycle´s usage. eferentially, it is discussed concepts such as Society, State and Government as well as public policies, which go in cycles to the State´s and Government´s responsibilities; and are presented the Sustainable Urban Mobility Public Policies (PPMUS) in Brazil. Also, it is debated about the transport by bicycle as an option to the sustainable mobility. Methodologically, the study is of an empiric-social nature, with the application of both qualitative and observational methods, what characterizes as an exploratory level of research, with the researcher´s involvement in the participant form, due to her acting on the Program. Regarding the research lineation, it was used the bibliographic and documental form as well as case study, by means of the nonparametric sampling by accessibility or convenience. Related to the data collection technique, it was used structured interviews with self-applied questionnaires and natural participant observation. Aligned with the research´s objective and matter, the outcome confirmed that the Extension Program CICLOVIDA of the Federal University of Paraná (UFPR) may effectively contribute in the development of a PPMUS proposal with emphasis in the bicycle usage. Thus, it was built a political proposal with a free form writing, objecting subsidize policies both institutional as public MUS through the bicycle usage and therefore, support the mobility, also contributing to the sustainability and to the public development planning.

Asiakkaan osallistuminen innovaatio- ja tuotekehitysprosessiin

Tässä tutkimuksessa tarkastellaan asiakkaan ja valmistajan osallistumista yhteistoiminnalliseen innovaatio- ja tuotekehitysprosessiin ja sen vaikutuksia yritysten kilpailukykyyn. Asiakaslähtöinen avoin innovaatio- ja tuotekehitystoiminta on yksi merkittävä kilpailuedun lähde, sillä se mahdollistaa tuotevariaatioiden nopeamman lanseerauksen ja asiakastarpeiden huomioimisen tuotekehitystoiminnassa. Tämän empiirisen tutkimuksen tavoitteena oli selvittää millä tavoin kulutustavaroihin kuuluvien muoti- ja sportvaatteiden suunnittelussa yhteistoiminnallinen innovaatio- ja tuotekehitystoiminta on mahdollista toteuttaa ja miten sitä voidaan hallita. Tutkimus toteutettiin kvalitatiivisena tapaustutkimuksena. Empiirinen aineisto kerättiin teemahaastatteluina tapausorganisaatiosta. Yhteistoiminnallisesta kehittämisestä ei ole olemassa yhtä kattavaa teoriaa, jota voitaisiin hyödyntää. Tämän vuoksi yritysten on luotava itse yhteistoiminnallisen innovaation ja tuotekehityksen viitekehys, joka parhaiten palvelee liiketoiminnan tarpeita. Viitekehys ja käytettävät menetelmät sekä yhteistoiminnallisuutta tukevat työvälineet ovat riippuvaisia mm. toimialasta ja sen markkinatilanteesta, liiketoimintamalleista, yrityksen toimintaympäristöstä, asiakkaista ja kehittämisen kohteeksi valitusta tuotealueesta. Empiirinen tutkimus osoittaa, että yhteistoiminnallinen innovaatio voi olla kilpailuedun lähde sekä valmistajille että asiakkaalle, mutta vaatii aina yrityskohtaista sopeuttamista. Tutkimuksen mukaan hyvin johdettu yhteistyömalli, oikeat tuotevalinnat ja asiakasinformaation monipuolinen hyödyntäminen vaikuttavat positiivisesti kehittämisprojektin tuloksiin.

Evaluación de las transferencias del sector eléctrico. El caso de San Carlos y el Oriente Antioqueño

Este artículo presenta los resultados obtenidos en la investigación hecha en los municipios del oriente de Antioquia, en particular en San Carlos, sobre las transferencias que el sector eléctrico les entregó durante los años comprendidos entre 2000 y 2012, en razón del aprovechamiento extensivo de los recursos naturales de la región (aguas y tierras) que las empresas generadoras de energía hacen en las regiones con asentamientos hidroeléctricos. Como conclusión, se observó una inequidad compensatoria en los municipios estudiados, dado que el criterio que ha primado para la entrega de las transferencias es la “capacidad instalada” y el criterio de “cuenca” por encima del criterio de “embalse”. Este último criterio se vincula más estrechamente con el consumo de tierras, y es el elemento más visible del aporte del capital natural de los municipios en los asentamientos hidroeléctricos.

Consideration of the relevance of standard quality techniques in Mass Customisation

The business philosophy of Mass Customisation (MC) implies rapid response to customer requests, high efficiency and limited cost overheads of customisation. Furthermore, it also implies the quality benefits of the mass production paradigm are guaranteed. However, traditional quality science in manufacturing is premised on volume production of uniform products rather than of differentiated products associated with MC. This creates quality challenges and raises questions over the suitability of standard quality engineering techniques. From an analysis of relevant MC and quality literature it is argued the aims of MC are aligned with contemporary thinking on quality and that quality concepts provide insights into MC. Quality issues are considered along three dimensions - product development, order fulfilment and customer interaction. The applicability and effectiveness of conventional quality engineering techniques are discussed and a framework is presented which identifies key issues with respect to quality for a spectrum of MC strategies.

Platform management and early supplier involvement in NPD

Platform strategies reflect a firm’s technology policy towards its new product development (NPD) activities. Depending on the technological complexities embedded in the platform, certain degree of interdependence is created between the firm and its suppliers. Firms may decide to what extent the suppliers should be involved in its NPD activities. There has been an increasing interest with issues related to supplier involvement in NPD. Involving suppliers early in NPD can help firms reduce costs, reduce concept-to-customer development time, improve quality, and provide innovative technologies. However, it requires a great effort and many tradeoffs need to be considered. This paper discusses the implications of early supplier involvement in new product development, specifically regarding to sourcing decisions and NPD processes when new components are designed and incorporated into the new platform. We would like to understand to what extent the NPD collaborates with suppliers, and at which stage of the NPD process suppliers are invited to participate in platform designs. A case study of Oticon, a Danish manufacturer of hearing aids, is presented. We describe how the successful introduction of a new platform of hearing aids is realized as well as how and when Oticon’s suppliers were involved during this process.