Present-day King George Island ice cap geometry measured by ground penetrating radar in 2008/09

We present a consistent data set for the ice thickness, the bedrock topography and the ice surface topography of the King George Island ice cap (Arctowski Icefield and the adjacent central part). The data set is composed of groundbased and airborne Ground Penetrating Radar (GPR) and differential GPS (DGPS) measurements, obtained during several field campaigns. The data set incorporates groundbased measurements in the safely accessible inner parts and airborne measurements in the heavily crevassed coastal areas of the ice cap. In particular, the inclusion of airborne GPR measurements with the 30MHz BGR-P30-System developed at the Institute of Geophysics (University of Münster) completes the picture of the ice geometry substantially. The compiled digital elevation model of the bedrock shows a rough, highly variable topography with pronounced valleys, ridges, and troughs. The mean ice thickness is approx. 238m, with a maximum value of approx. 400m in the surveyed area. Noticeable are bounded areas in the bedrock topography below sea level where marine based ice exists.

(Supplemet S1) Silicon oxide and Potassium + Sodium oxide from the PACManus hydrothermal area

This study presents a systematic analysis and interpretation of autonomous underwater vehicle-based microbathymetry combined with remotely operated vehicle (ROV) video recordings, rock analyses and temperaturemeasurements within the PACManus hydrothermal area located on Pual Ridge in the Bismarck Sea of eastern Manus Basin. The data obtained during research cruise Magellan-06 and So-216 provides a framework for understanding the relationship between the volcanism, tectonismand hydrothermal activity. PACManus is a submarine felsic vocanically-hosted hydrothermal area that hosts multiple vent fields locatedwithin several hundredmeters of one another but with different fluid chemistries, vent temperatures and morphologies. The total area of hydrothermal activity is estimated to be 20,279m**2. Themicrobathymetrymaps combinedwith the ROV video observations allow for precise high-resolution mapping estimates of the areal extents of hydrothermal activity.We find the distribution of hydrothermal fields in the PACManus area is primarily controlled by volcanic features that include lava domes, thick andmassive blocky lava flows, breccias and feeder dykes. Spatial variation in the permeability of local volcanic facies appears to control the distribution of venting within a field.We define a three-stage chronological sequence for the volcanic evolution of the PACManus based on lava flow morphology, sediment cover and lava SiO2 concentration. In Stage-1, sparsely to moderately porphyritic dacite lavas (68-69.8 wt.% SiO2) erupted to form domes or cryptodomes. In Stage-2, aphyric lava with slightly lower SiO2 concentrations (67.2-67.9 wt.% SiO2) formed jumbled and pillowed lava flows. In the most recent phase Stage-3, massive blocky lavaswith 69 to 72.5wt.% SiO2were erupted throughmultiple vents constructing a volcanic ridge identified as the PACManus neovolcanic zone. The transition between these stages may be gradual and related to progressive heating of a silicic magma following a recharge event of hot, mantle-derived melts.

(Table 1) Apparent ages from 40Ar/39Ar heating steps for DSDP Hole 72-516F basalts

Submarine basalts are difficult to date accurately by the potassium-argon method. Dalrymple and Moore (1968) and Dymond (1970), for example, showed that, when the conventional K-Ar method is used, pillow lavas may contain excess 40Ar. Use of the 40Ar/39Ar step-heating method has not overcome the problem, as had been hoped, and has produced some conflicting results. Ozima and Saito (1973) concluded that the excess 40Ar is retained only in high temperature sites, but Seidemann (1978) found that it could be released at all temperatures. Furthermore, addition of potassium, from seawater, to the rock after it has solidified can result in low ages (Seidemann, 1977), the opposite effect to that of excess 40Ar. Thus, apparent ages may be either greater or less than the age of extrusion. Because of this discouraging record, the present study was approached pragmatically, to investigate whether self-consistent results can be obtained by the 40Ar/39Ar step-heating method.

(Table 1) Clay mineralogy at DSDP Sites 86-576 and 86-578

Late Cretaceous and Cenozoic sediments deposited on the eastern and western sides of the Shatsky Rise show similar clay assemblages of chlorite, illite, mixed layers, smectite, kaolinite, and palygorskite, and a similar vertical differentiation into three units. The deep-sea pelagic red clay is dominated by terrigenous components, which suggests that diagenesis is minor in this part of the western North Pacific and that eolian supply is very important. The role of the Shatsky Rise as a submarine barrier is of minor importance. The volcanic contribution to the clay component appears very small, as in some other parts of the Pacific Ocean. Stratigraphic correlations between Sites 576 and 578, which can be made from mineralogical data, partly offset the rareness of biostratigraphic markers.

Table 1 : AMS-14C data used for the reconstruction of the Wismar Bay shoreline displacement curve

The Baltic coast of Mecklenburg-Vorpommern is located in the transition Zone between the region of Fennoscandian Uplift and the Central European Depression. In relation to the eustatic sea-level rise, the northeast coast shows a slower inundation, while for the southwestern area a faster transgression is indicated, which can be attributed to crustal movements. To determine the spatial and temporal differences since the onset of the Littorina Transgression, three relative sea-level curves have been established along a transect parallel to the gradient of upliftlsubsidence. The Wismar Bay area is one endpoint of the transect demonstrating today 10 Abb., 2 Tab. a relative sea-level rise of 1.4 mm/a. To determine the relative sea-level curve for the Wismar Bay, two sites were investigated on Rustwerder Spit (Poel) and Redentin. They provided reliable depth-age data, while the stratigraphy was additionally supported by lithological/geochemical, pollen, diatom and macrofossil data. Additional evidence was provided by archaeological submarine surveys and excavations. Comparing the new relative sea-level curve with a curve from the Vorpommern coast, it can be shown that for the period from 4000 cal BC until present, the differences between the two curves are caused by a constant neotectonic movement, while for the older periods an increasing isostatic component must be taken into account.

Sr, Nd and Pb isotopic ratios of igneous rocks from DSDP holes (Table 1)

Igneous rocks from the Philippine tectonic plate recovered on Deep Sea Drilling Project Legs 31, 58 and 59 have been analyzed for Sr, Nd and Pb isotope ratios. Samples include rocks from the West Philippine Basin, Daito Basin and Benham Rise (40-60 m.y.), the Palau-Kyushu Ridge (29-44 m.y.) and the Parece Vela and Shikoku basins (17-30 m.y.). Samples from the West Philippine, Parece Vela and Shikoku basins are MORB (mid-ocean ridge basalt)-like with 87Sr/86Sr = 0.7026 - 0.7032, 143Nd/144Nd = 0.51300 - 0.51315, and 206Pb/204Pb = 17.8 - 18.1. Samples from the Daito Basin and Benham Rise are OIB (oceanic island basalt)-like with 87Sr/86Sr = 0.7038 - 0.7040, 143Nd/144Nd = 0.51285 - 0.51291 and 206Pb/204Pb = 18.8 - 19.2. All of these rocks have elevated 207Pb/204Pb and 208Pb/204Pb compared to the Northern Hemisphere Regression Line (NHRL) and have delta207Pb values of 0 to +6 and delta208Pb values of +32 to +65. Lavas from the Palau-Kyushu Ridge, a remnant island arc, have 87Sr/86Sr = 7032 - 0.7035, 143Nd/144Nd = 0.51308 - 0.51310 and 206Pb/204Pb = 18.4 - 18.5. Unlike the basin magmas erupted before and after them, these lavas plot along the NHRL and have Pb-isotope ratios similar to modern Pacific plate MORB's. This characteristic is shared by other Palau-Kyushu Arc volcanic rocks that have been sampled from submerged and subaerial portions of the Mariana fore-arc. At least four geochemically distinct magma sources are required for these Philippine plate magmas. The basin magmas tap Source 1, a MORB-mantle source that was contaminated by EMI (enriched mantle component 1 (Hart, 1988, doi:10.1016/0012-821X(88)90131-8)) and Source 2, an OIB-like mantle source with some characteristics of EMII (enriched mantle component 2 (Hart, 1988)). The arc lavas are derived from Source 3, a MORB-source or residue mantle including Sr and Pb from the subducted oceanic crust, and Source 4, MORB-source or residue mantle including a component with characteristics of HIMU (mantle component with high U/Pb (Hart, 1988)). These same sources can account for many of the isotopic characteristics of recent Philippine plate arc and basin lavas. The enriched components in these sources which are associated with the DUPAL anomaly were probably introduced into the asthenosphere from the deep mantle when the Philippine plate was located in the Southern Hemisphere 60 m.y.b.p.

Age model and elemental data of DSDP Holes 48-401 and 80-549

A growing body of geologic evidence suggests that emplacement of the North Atlantic Igneous Province (NAIP) played a major role in global warming during the early Paleogene as well as in the transient Paleocene-Eocene thermal maximum (PETM) event. A ~5 million year record of major and trace element abundances spanning 56 to 51 Ma at Deep Sea Drilling Project Sites 401 and 549 confirms that the majority of NAIP volcanism occurred as subaerial flows. Thus the trace element records provide constraints on the nature and scope of the environmental impact of the NAIP during the late Paleocene-early Eocene interval. Subaerial volcanism would have injected mantle CO2 directly into the atmosphere, resulting in a more immediate increase in atmospheric greenhouse gas abundances than CO2 input through submarine volcanism. The lack of significant hydrothermalism contradicts recently proposed mechanisms for thermally destabilizing methane hydrate reservoirs during the PETM. Any connection between NAIP volcanism and PETM warming had to occur through the atmosphere.