Projeto de recuperação da planta termelétrica do Laboratório de Vapor do Departamento de Energia da Faculdade de Engenharia de Guaratinguetá

Brazil is nowadays the greatest bet of investors for the future due to its stable economy growth. The country has grown side by side with the greatest demand for electrical energy. The international appeal for renewable sources is causing a change in the Brazilian energetic matrix, raising the amount of energy generated by thermoelectric power plants. The construction of new power plants, running on biomass, requires a crescent number of capacitated personnel to run them. The Faculdade de Engenharia de Guaratinguetá – UNESP – has a steam laboratory; witch is deactivated, which has a thermoelectric plant of small capacity. The laboratory reactivation and the return of its activities can be an important tool in order to graduate engineer able to operate on such units. This paper proposes four new experiments to be simulated on the Collage’s Energy Dep. Steam Lab when it gets back to its educational activities

Caracterização e origem da composição química da incrustação e simulação de cenários de perda de energia em setor da rede de abastecimento de água da cidade de Rio Claro - SP

The purpose of this work was the inlay’s characterization from the water supply networks of Rio Claro-SP city; as well analyze the influence of network’s aging in the actual system. To do this, some samples of inlays were collected and made chemistry analysis and X-Ray Diffraction Spectrometry. The history of the source water quality was also analyzed, to make possible to known the origins of the inlays. To evaluate the performance of the network, some different scenarios have been simulated, varying the resistance coefficient of the water supply networks of Rio Claro-SP. The characterization results showed that there are basically oxide and hydroxide of iron (magnetite and goethite) and quartz in the inlays, which are materials of high hardness. The hydraulic simulations indicated that the simulated scenarios had a variation of ~2000% in terms of loss of energy

Aplicação de um sistema de monitoramento remoto para auxiliar na manutenção preditiva e preventiva de componentes de uma subestação

The increase in energy consumption in the world has caused the electrical systems becoming ever larger and more complex. Because of that becomes necessary to use special tools to efficiently manage the equipment present in these systems. Nowadays a tool very used is the remote monitoring of assets which works collecting signals using sensors processing these signals and make them available to the system user. So the user can use informations that may assist him efficiently in making decisions when doing a maintenance. The system is technically efficient since it improves the measurement process and enables the asset management of a substation by using advanced technology for that and economically viable especially in cases where the user is subject to monetary loss due an interruption of power supply

Energia eólica: uma alternativa de energia renovável para a matriz energética do Brasil?

O presente trabalho possui o intuito de analisar o panorama de energia eólica em âmbito mundial, dando um enfoque maior para seu cenário no Brasil. Primeiramente, estudando a história da energia eólica, seu advento, para fins de solução ao viés ambiental e à necessidade de diversificação da matriz energética mundial, com a finalidade de assumir os compromissos firmados no Protocolo de Kyoto, e, no caso do Brasil, da menor dependência do abastecimento externo

Projeto de um sistema anaeróbico para estabilização de lodo e recuperação de energia

The treatment of domestic and industrial effluents through Wastewater Treatment Plants (WTPs) generates a residue termed sewage sludge, rich in organic matter, high-volume, occasionally containing pathogens and heavy metals. The sludge generation can minimize the benefits brought by the treatment of sewage, because this residue does not always receive appropriate treatment before final disposal. The disposal is another problem related to sludge. Landfills generally does not have physical space and alternatives such as the use in agriculture requires an intense treatment that could be in many cases operational or economic unfeasible. The objective of this work is the theoretical research about the processes of stabilization of the sludge by anaerobic digestion and the methanogenic activity during the process. Through analysis of each step and contemplating each relevant factor in anaerobic digestion process in order to optimize them, we proposed a theoretical model of reactors capable of stabilize the sludge, reduce its volume and eliminate pathogens. The obtained configuration consists of two anaerobic reactors connected in series. The first one operates in the range mesophilic temperature (35 ° C) and has higher hydraulic retention time (25 days) working primarily in the stabilization of organic matter present in the sludge and producing biogas, whereas the second one operates in the thermophilic range (55 ° C) in order to eliminate pathogens, and to reduce the volume. The hydraulic retention time in the second reactor is lower (10 days). Both mesophilic and thermophilic processes were efficient in what was proposed, promoting the stabilization of organic matter present in the sludge and significant reduction of pathogens. As a final step with the sludge previously digested, it is indicated a final dehydration... (Complete abstract click electronic access below)

Análise técnica e econômica da utilização da energia solar e eólica em uma propriedade rural para geração de eletricidade, bombeamento e aquecimento de água

This paper is about a case study of using solar energy and wind energy in a farm. For this purpose were collected from the property, such as water consumption and amount of residents. So, we estimate how many conventional panels or PET bottle panels and boiler needed to supply the farm with warm water. It also calculates the amount of photovoltaic panels and the main accessories for converting solar energy into electrical energy. For the pumping of water using photovoltaic panels is dismissed and dimensioned to be a watermill

Desenvolvimento de um anteprojeto de um sistema de digitalização da proteção e controle aplicada a uma subestação elétrica industrial de alta tensão

The proposed of scanning of an electrical industrial substation HV is associated with a segment of the Electrotechnical area and aims the study and preliminary application of digital technologies in the protection, control, measurement and automation maneuvers aimed at a Industrial Electrical System typical High Voltage. Well intended to supervision, protection and control of major electrical and thermal quantities involved in a substation, such as voltage levels, current, temperature, power factor, loads of transformers and circuit feeders, status of interlocking devices, switching equipment maneuvers, etc

O risco ambiental representado por campos eletromagnéticos em Presidente Prudente (SP)

Currently the mobile services represent an essential tool in daily life of the population. However, while offering greater convenience to its users, there is growing concern about the harmful effects to human health, derived from daily exposure of the public to electromagnetic fields from radio base stations (RBS), since even today, there is no study proving that longterm exposure to low-level fields are not harmful to health. In Presidente Prudente has not been a study reporting values of measurements of electromagnetic fields from base stations installed in the city. Based on these data, this study aimed to assess the levels of electromagnetic exposure in the city of Presidente Prudente regarding recommended by international bodies, as well as propose measures that can reduce public exposure to electromagnetic fields. For measuring values of electromagnetic fields, we used appliance Electromagnetic Field Meter Portable Digital - DRE-050, the Instrutherm, following the methodology suggested and adapted from the Adilza Condessa Dode’study. In total, 49 points were mapped corresponding to the areas at risk of exposure to electromagnetic fields generated by the substations of power grid, transmission towers and telecommunication towers located in the city of Presidente Prudente (SP)

Otimização de procedimentos de controle de qualidade em equipamentos radiográficos convencionais do Instituto de Eletrotécnica e Energia - USP

Radiography is currently an important method of diagnosis, both medical, dental and veterinary. The image in this type of survey is obtained using an X-ray beam, where the radiologist can possibly view structures of interest. It isn't always possible to get the desired images due to various factors, such as equipment limitations. The Administrative Law 453/98, the State Resolution SS 625/94, and other standards require testing and quality control acceptance limits that guarantee a good performance of the equipment for the security and quality of care, giving service users greater effectiveness in exams. This study were performed in the accompaniment of testing procedures for quality control established by Administrative Law 453/98 in several X-ray equipment to make a comparison and optimization in the descriptions of the procedures used by the Institute for Electrical Energy and the University of São Paulo (IEE / USP / SP).The optimization of the procedures were performed with the aid of a current literature, the Resolution 453/98, State Resolution SS 625/94 and other international standards. On this basis it was possible to observe the importance of regular monitoring of tests for an update, following the technological development of instruments used in the service

Redução de consumo de energia eletrica a partir de reaproveitamento de energia termica com uso de ciclo rankine orgânico

This paper is proposed the usage of an Organic Rankine Cycle (ORC) along with waste heat recovery from an inconstant heat source. This method of waste heat recovery with intermittent heat source is part of a technical viability study. This paper also brings up the usage of thermal energy storage as heat source for the ORC. This paper is based on a heat treatment company study in which a natural gas furnace is explored. Data such as mass flow, temperature and specific waste gas heat from this furnace are used through calculations. Calculations are made also based on furnace cycles. This viability study considers a series of working fluids such as ammonia, benzene, R113 and R134a. Results point out that ORC with out thermal storage and using refrigerant fluid ammonia is the best alternative

Implementação de um tuboexpansor na refinaria do Planalto Paulista – REPLAN com objetivo do aproveitamento da energia contida nos gases residuais do FCC – Fluid Catalytic Cracking na geração de energia elétrica

The steel type AISI 4130 (ultra-high strength steel) is an alloy of low carbon and its main alloying elements are chromium and molybdenum, which improves the toughness of the weld metal. It has numerous applications, especially where the need for high mechanical strength. It is widely used in equipment used by the aviation industry, such as cradle-tomotor, and this is the motivation for this study. Cots are of fundamental importance, because the engine supports and maintains balance in the fixed landing gear. This equipment is subjected to intense loading cycles, whose fractures caused by fatigue are constantly observed. Will be determined the effects caused by re-welding the structure of aeronautical equipment, and will also study the microstructure of the metal without welding. The studies will be done on materials used in aircraft, which was given to study. The results provide knowledge of microstructure to evaluate any type of fracture that maybe caused by fatigue. Fatigue is a major cause of aircraft accidents and incidents occurred, which makes the study of the microstructure of the metal, weld and re-solder the knowledge essential to the life of the material. The prevention and control of the process of fatigue in aircraft are critical, since the components are subjected to greater responsibility cyclic loading

Técnicas de energia elétrica sustentável aplicadas em edificações

One of the majors concerns in society today is to decrease the environmental impact caused by human activities and natural resource exploration. From this need to be more careful with the environment arose, in the field of civil construction, the term sustainable building. Projects that use natural resources rationally, without ceasing to bring comfort and functionality for customers, are becoming more a reality. This paper presents the share of electric energy in a sustainable building, with the analysis of the available renewable energies used in a project, presentation of new constructive techniques and technologies that are constantly emerging to achieve greater energy efficiency, with an appropriate use of energy received, also a decrease of the energy consumed by some devices present in a residence or business

Estudo e análise do risco e da viabilidade econômica do mercado cativo e do mercado livre de energia elétrica no terceiro ciclo tarifário

In 2004 two trading environment for contracts of purchase and of electricity energy were established, the Regulated Contracting Environment (RGE) and the Free Contracting Environment (FCE). In the first one, consumers can only buy their energy directly from local electricity distribution, and in the second one, consumers can choose their delivery, amount and type of energy that they will burn through bilateral contracts. Thus, before deciding to migrate to the FCE, it is necessary understanding the rules of marketing, the risk involved and the economic viability of the two markets so can determine which environment has more benefits to the consumer. This paper aims to offer tools to support takeover decision of potentially free costumers, who have the option to migrate to market in order to evaluate the benefits and disadvantages of each market. This paper has also considered the new rules of the third rate cycle, where consumers can opt for green tax. The methodology presented is based on calculations of spending with energy and the risk of flag in captive market and free market in one year

Geração de energia fotovoltaica para cargas pontuais em residências

This work, based in a patent request at INPI, protocol no. 020110035974, presents a system development using solar panels to supply the electricity demand required by punctual loads, without a storage unit or utility grid synchronism, through a control circuit that allows parallel operation with the power grid during low sunlight incidence periods. A study about solar panel construction and topologies for Power generation was done, in a atempt to evalute impacts in project. This development was modular, providing the system the possibility of power capacity expansion and load diversity as well, in an attempt to reduce the total energy requirements from the residential sector drained from the power grid along the day

Proteção de sistemas eletricos industriais: relés e suas aplicações em subestações

Electrical installations in industries involving high currents and voltages considered. On the other side is the common appearance of electrical failures, caused by human error, defects in electrical equipment or electrical installation aging itself. These failures are varied, those with the highest rate of occurrence and cause much damage to electrical installations, are overcurrent and overvoltage. Therefore there is a need to project a system that can detect and minimize possible effects caused by faults in electrical installations industries. Protection systems in electric industries emerge as an alternative to control especially voltage and current magnitudes. Engineered based on the functions of the relays, protection systems are an indispensable tool for any industrial substation. But the project of such systems becomes increasingly more complex, due to technological development. Electrical equipment not develop at the same speed that the protective devices (relays), making it indispensable knowledge of integration of technologies