Significance of Staphylococcus lugdunensis bacteremia: report of 28 cases and review of the literature

BACKGROUND: Staphylococcus lugdunensis endocarditis has been associated with an aggressive course. The aim of this study was to determine factors associated with the development of endocarditis in patients with S. lugdunensis bacteremia. METHODS: A retrospective analysis of all patients with S. lugdunensis bacteremia in three tertiary care centers in Switzerland was performed. Data regarding medical history, symptoms, and susceptibility of S. lugdunensis isolates were collected. Our results were reviewed in the context of the current literature. RESULTS: A total of 28 patients with S. lugdunensis bacteremia were identified. Of the 13 patients with endocarditis, all were community acquired. Cardiac surgery was performed in 85% of these patients; mortality was 23%, reflecting the aggressive course of this disease. In contrast, in the 15 patients without endocarditis, no complications associated with S. lugdunensis bacteremia were observed. In 73%, a probable source was identified in the form of a venous catheter or other foreign device. Only three of these episodes were community acquired. No difference was observed in susceptibility of the S. lugdunensis isolates to penicillin, which was 77% in endocarditis isolates, and 87% in isolates of bacteremia without endocarditis, respectively. CONCLUSION: S. lugdunensis bacteremia is associated with endocarditis in up to 50% of patients. Every patient with community-acquired S. lugdunensis bacteremia should be carefully examined for signs of endocarditis. Once S. lugdunensis endocarditis is diagnosed, close monitoring is essential and surgical treatment should be considered early. In the nosocomial setting, endocarditis is far less frequent, and S. lugdunensis bacteremia is usually associated with a catheter or other foreign materials.

Experimental and modeling study of the filtration and oxidation characteristics of a diesel oxidation catalyst and a catalyzed particulate filter

A diesel oxidation catalyst (DOC) with a catalyzed diesel particulate filter (CPF) is an effective exhaust aftertreatment device that reduces particulate emissions from diesel engines, and properly designed DOC-CPF systems provide passive regeneration of the filter by the oxidation of PM via thermal and NO2/temperature-assisted means under various vehicle duty cycles. However, controlling the backpressure on engines caused by the addition of the CPF to the exhaust system requires a good understanding of the filtration and oxidation processes taking place inside the filter as the deposition and oxidation of solid particulate matter (PM) change as functions of loading time. In order to understand the solid PM loading characteristics in the CPF, an experimental and modeling study was conducted using emissions data measured from the exhaust of a John Deere 6.8 liter, turbocharged and after-cooled engine with a low-pressure loop EGR system and a DOC-CPF system (or a CCRT® - Catalyzed Continuously Regenerating Trap®, as named by Johnson Matthey) in the exhaust system. A series of experiments were conducted to evaluate the performance of the DOC-only, CPF-only and DOC-CPF configurations at two engine speeds (2200 and 1650 rpm) and various loads on the engine ranging from 5 to 100% of maximum torque at both speeds. Pressure drop across the DOC and CPF, mass deposited in the CPF at the end of loading, upstream and downstream gaseous and particulate emissions, and particle size distributions were measured at different times during the experiments to characterize the pressure drop and filtration efficiency of the DOCCPF system as functions of loading time. Pressure drop characteristics measured experimentally across the DOC-CPF system showed a distinct deep-bed filtration region characterized by a non-linear pressure drop rise, followed by a transition region, and then by a cake-filtration region with steadily increasing pressure drop with loading time at engine load cases with CPF inlet temperatures less than 325 °C. At the engine load cases with CPF inlet temperatures greater than 360 °C, the deep-bed filtration region had a steep rise in pressure drop followed by a decrease in pressure drop (due to wall PM oxidation) in the cake filtration region. Filtration efficiencies observed during PM cake filtration were greater than 90% in all engine load cases. Two computer models, i.e., the MTU 1-D DOC model and the MTU 1-D 2-layer CPF model were developed and/or improved from existing models as part of this research and calibrated using the data obtained from these experiments. The 1-D DOC model employs a three-way catalytic reaction scheme for CO, HC and NO oxidation, and is used to predict CO, HC, NO and NO2 concentrations downstream of the DOC. Calibration results from the 1-D DOC model to experimental data at 2200 and 1650 rpm are presented. The 1-D 2-layer CPF model uses a ‘2-filters in series approach’ for filtration, PM deposition and oxidation in the PM cake and substrate wall via thermal (O2) and NO2/temperature-assisted mechanisms, and production of NO2 as the exhaust gas mixture passes through the CPF catalyst washcoat. Calibration results from the 1-D 2-layer CPF model to experimental data at 2200 rpm are presented. Comparisons of filtration and oxidation behavior of the CPF at sample load-cases in both configurations are also presented. The input parameters and selected results are also compared with a similar research work with an earlier version of the CCRT®, to compare and explain differences in the fundamental behavior of the CCRT® used in these two research studies. An analysis of the results from the calibrated CPF model suggests that pressure drop across the CPF depends mainly on PM loading and oxidation in the substrate wall, and also that the substrate wall initiates PM filtration and helps in forming a PM cake layer on the wall. After formation of the PM cake layer of about 1-2 µm on the wall, the PM cake becomes the primary filter and performs 98-99% of PM filtration. In all load cases, most of PM mass deposited was in the PM cake layer, and PM oxidation in the PM cake layer accounted for 95-99% of total PM mass oxidized during loading. Overall PM oxidation efficiency of the DOC-CPF device increased with increasing CPF inlet temperatures and NO2 flow rates, and was higher in the CCRT® configuration compared to the CPF-only configuration due to higher CPF inlet NO2 concentrations. Filtration efficiencies greater than 90% were observed within 90-100 minutes of loading time (starting with a clean filter) in all load cases, due to the fact that the PM cake on the substrate wall forms a very efficient filter. A good strategy for maintaining high filtration efficiency and low pressure drop of the device while performing active regeneration would be to clean the PM cake filter partially (i.e., by retaining a cake layer of 1-2 µm thickness on the substrate wall) and to completely oxidize the PM deposited in the substrate wall. The data presented support this strategy.

Post processing of multiple GPS receivers to enhance baseline accuracy

Inexpensive, commercial available off-the-shelf (COTS) Global Positioning Receivers (GPS) have typical accuracy of ±3 meters when augmented by the Wide Areas Augmentation System (WAAS). There exist applications that require position measurements between two moving targets. The focus of this work is to explore the viability of using clusters of COTS GPS receivers for relative position measurements to improve their accuracy. An experimental study was performed using two clusters, each with five GPS receivers, with a fixed distance of 4.5 m between the clusters. Although the relative position was fixed, the entire system of ten GPS receivers was on a mobile platform. Data was recorded while moving the system over a rectangular track with a perimeter distance of 7564 m. The data was post processed and yielded approximately 1 meter accuracy for the relative position vector between the two clusters.

Study of water use and supply in the district of Independencia, Peru

Peru is a developing country with abundant fresh water resources, yet the lack of infrastructure leaves much of the population without access to safe water for domestic uses. The author of this report was a Peace Corps Volunteer in the sector of water & sanitation in the district of Independencia, Ica, Peru. Independencia is located in the arid coastal region of the country, receiving on average 15 mm of rain annually. The water source for this district comes from the Pisco River, originating in the Andean highlands and outflowing into the Pacific Ocean near the town of Pisco, Peru. The objectives of this report are to assess the water supply and sanitation practices, model the existing water distribution system, and make recommendations for future expansion of the distribution system in the district of Independencia, Peru. The assessment of water supply will be based on the results from community surveys done in the district of Independencia, water quality testing done by a detachment of the U.S. Navy, as well as on the results of a hydraulic model built in EPANET 2.0 to represent the distribution system. Sanitation practice assessments will be based on the surveys as well as observations from the author while living in Peru. Recommendations for system expansions will be made based on results from the EPANET model and the municipality’s technical report for the existing distribution system. Household water use and sanitation surveys were conducted with 84 families in the district revealing that upwards of 85% store their domestic water in regularly washed containers with lids. Over 80% of those surveyed are drinking water that is treated, mostly boiled. Of those surveyed, over 95% reported washing their hands and over 60% mentioned at least one critical time for hand washing when asked for specific instances. From the surveys, it was also discovered that over 80% of houses are properly disposing of excrement, in either latrines or septic tanks. There were 43 families interviewed with children five years of age or under, and just over 18% reported the child had a case of diarrhea within the last month at the time of the interview. Finally, from the surveys it was calculated that the average water use per person per day is about 22 liters. Water quality testing carried out by a detachment of the U.S. Navy revealed that the water intended for consumption in the houses surveyed was not suitable for consumption, with a median E. coli most probable number of 47/100 ml for the 61 houses sampled. The median total coliforms was 3,000 colony forming units per 100 ml. EPANET was used to simulate the water delivery system and evaluate its performance. EPANET is designed for continuous water delivery systems, assuming all pipes are always flowing full. To account for the intermittent nature of the system, multiple EPANET network models were created to simulate how water is routed to the different parts of the system throughout the day. The models were created from interviews with the water technicians and a map of the system created using handheld GPS units. The purpose is to analyze the performance of the water system that services approximately 13,276 people in the district of Independencia, Peru, as well as provide recommendations for future growth and improvement of the service level. Performance evaluation of the existing system is based on meeting 25 liters per person per day while maintaining positive pressure at all nodes in the network. The future performance is based on meeting a minimum pressure of 20 psi in the main line, as proposed by Chase (2000). The EPANET model results yield an average nodal pressure for all communities of 71 psi, with a range from 1.3 – 160 psi. Thus, if the current water delivery schedule obtained from the local municipality is followed, all communities should have sufficient pressure to deliver 25 l/p/d, with the exception of Los Rosales, which can only supply 3.25 l/p/d. However, if the line to Los Rosales were increased from one to four inches, the system could supply this community with 25 l/p/d. The district of Independencia could greatly benefit from increasing the service level to 24-hour water delivery and a minimum of 50 l/p/d, so that communities without reliable access due to insufficient pressure would become equal beneficiaries of this invaluable resource. To evaluate the feasibility of this, EPANET was used to model the system with a range of population growth rates, system lifetimes, and demands. In order to meet a minimum pressure of 20 psi in the main line, the 6-inch diameter main line must be increased and approximately two miles of trench must be excavated up to 30 feet deep. The sections of the main line that must be excavated are mile 0-1 and 1.5-2.5, and the first 3.4 miles of the main line must be increased from 6 to 16 inches, contracting to 10 inches for the remaining 5.8 miles. Doing this would allow 24-hour water delivery and provide 50 l/p/d for a range of population growth rates and system lifetimes. It is expected that improving the water delivery service would reduce the morbidity and mortality from diarrheal diseases by decreasing the recontamination of the water due to transport and household storage, as well as by maintaining continuous pressure in the system to prevent infiltration of contaminated groundwater. However, this expansion must be carefully planned so as not to affect aquatic ecosystems or other districts utilizing water from the Pisco River. It is recommended that stream gaging of the Pisco River and precipitation monitoring of the surrounding watershed is initiated in order to begin a hydrological study that would be integrated into the district’s water resource planning. It is also recommended that the district begin routine water quality testing, with the results available to the public.

Residence near power lines and mortality from neurodegenerative diseases: longitudinal study of the Swiss population

The relation between residential magnetic field exposure from power lines and mortality from neurodegenerative conditions was analyzed among 4.7 million persons of the Swiss National Cohort (linking mortality and census data), covering the period 2000-2005. Cox proportional hazard models were used to analyze the relation of living in the proximity of 220-380 kV power lines and the risk of death from neurodegenerative diseases, with adjustment for a range of potential confounders. Overall, the adjusted hazard ratio for Alzheimer's disease in persons living within 50 m of a 220-380 kV power line was 1.24 (95% confidence interval (CI): 0.80, 1.92) compared with persons who lived at a distance of 600 m or more. There was a dose-response relation with respect to years of residence in the immediate vicinity of power lines and Alzheimer's disease: Persons living at least 5 years within 50 m had an adjusted hazard ratio of 1.51 (95% CI: 0.91, 2.51), increasing to 1.78 (95% CI: 1.07, 2.96) with at least 10 years and to 2.00 (95% CI: 1.21, 3.33) with at least 15 years. The pattern was similar for senile dementia. There was little evidence for an increased risk of amyotrophic lateral sclerosis, Parkinson's disease, or multiple sclerosis.

Development of a high performance parallel computing platform and its use in the study of nanostructures : clusters, sheets and tubes .

Small clusters of gallium oxide, technologically important high temperature ceramic, together with interaction of nucleic acid bases with graphene and small-diameter carbon nanotube are focus of first principles calculations in this work. A high performance parallel computing platform is also developed to perform these calculations at Michigan Tech. First principles calculations are based on density functional theory employing either local density or gradient-corrected approximation together with plane wave and gaussian basis sets. The bulk Ga2O3 is known to be a very good candidate for fabricating electronic devices that operate at high temperatures. To explore the properties of Ga2O3 at nonoscale, we have performed a systematic theoretical study on the small polyatomic gallium oxide clusters. The calculated results find that all lowest energy isomers of GamOn clusters are dominated by the Ga-O bonds over the metal-metal or the oxygen-oxygen bonds. Analysis of atomic charges suggest the clusters to be highly ionic similar to the case of bulk Ga2O3. In the study of sequential oxidation of these slusters starting from Ga2O, it is found that the most stable isomers display up to four different backbones of constituent atoms. Furthermore, the predicted configuration of the ground state of Ga2O is recently confirmed by the experimental result of Neumark's group. Guided by the results of calculations the study of gallium oxide clusters, performance related challenge of computational simulations, of producing high performance computers/platforms, has been addressed. Several engineering aspects were thoroughly studied during the design, development and implementation of the high performance parallel computing platform, rama, at Michigan Tech. In an attempt to stay true to the principles of Beowulf revolutioni, the rama cluster was extensively customized to make it easy to understand, and use - for administrators as well as end-users. Following the results of benchmark calculations and to keep up with the complexity of systems under study, rama has been expanded to a total of sixty four processors. Interest in the non-covalent intereaction of DNA with carbon nanotubes has steadily increased during past several years. This hybrid system, at the junction of the biological regime and the nanomaterials world, possesses features which make it very attractive for a wide range of applicatioins. Using the in-house computational power available, we have studied details of the interaction between nucleic acid bases with graphene sheet as well as high-curvature small-diameter carbon nanotube. The calculated trend in the binding energies strongly suggests that the polarizability of the base molecules determines the interaction strength of the nucleic acid bases with graphene. When comparing the results obtained here for physisorption on the small diameter nanotube considered with those from the study on graphene, it is observed that the interaction strength of nucleic acid bases is smaller for the tube. Thus, these results show that the effect of introducing curvature is to reduce the binding energy. The binding energies for the two extreme cases of negligible curvature (i.e. flat graphene sheet) and of very high curvature (i.e. small diameter nanotube) may be considered as upper and lower bounds. This finding represents an important step towards a better understanding of experimentally observed sequence-dependent interaction of DNA with Carbon nanotubes.

AN EXPERIMENTAL STUDY OF PARTIAL LOW RISK DEPLOYMENT IN A FIXED VEHICLE ENVIRONMENT

This study will look at the passenger air bag (PAB) performance in a fix vehicle environment using Partial Low Risk Deployment (PLRD) as a strategy. This development will follow test methods against actual baseline vehicle data and Federal Motor Vehicle Safety Standards 208 (FMVSS 208). FMVSS 208 states that PAB compliance in vehicle crash testing can be met using one of three deployment methods. The primary method suppresses PAB deployment, with the use of a seat weight sensor or occupant classification sensor (OCS), for three-year old and six-year old occupants including the presence of a child seat. A second method, PLRD allows deployment on all size occupants suppressing only for the presents of a child seat. A third method is Low Risk Deployment (LRD) which allows PAB deployment in all conditions, all statures including any/all child seats. This study outlines a PLRD development solution for achieving FMVSS 208 performance. The results of this study should provide an option for system implementation including opportunities for system efficiency and other considerations. The objective is to achieve performance levels similar too or incrementally better than the baseline vehicles National Crash Assessment Program (NCAP) Star rating. In addition, to define systemic flexibility where restraint features can be added or removed while improving occupant performance consistency to the baseline. A certified vehicles’ air bag system will typically remain in production until the vehicle platform is redesigned. The strategy to enable the PLRD hypothesis will be to first match the baseline out of position occupant performance (OOP) for the three and six-year old requirements. Second, improve the 35mph belted 5th percentile female NCAP star rating over the baseline vehicle. Third establish an equivalent FMVSS 208 certification for the 25mph unbelted 50th percentile male. FMVSS 208 high-speed requirement defines the federal minimum crash performance required for meeting frontal vehicle crash-test compliance. The intent of NCAP 5-Star rating is to provide the consumer with information about crash protection, beyond what is required by federal law. In this study, two vehicles segments were used for testing to compare and contrast to their baseline vehicles performance. Case Study 1 (CS1) used a cross over vehicle platform and Case Study 2 (CS2) used a small vehicle segment platform as their baselines. In each case study, the restraints systems were from different restraint supplier manufactures and each case contained that suppliers approach to PLRD. CS1 incorporated a downsized twins shaped bag, a carryover inflator, standard vents, and a strategic positioned bag diffuser to help disperse the flow of gas to improve OOP. The twin shaped bag with two segregated sections (lobes) to enabled high-speed baseline performance correlation on the HYGE Sled. CS2 used an A-Symmetric (square shape) PAB with standard size vents, including a passive vent, to obtain OOP similar to the baseline. The A-Symmetric shape bag also helped to enabled high-speed baseline performance improvements in HYGE Sled testing in CS2. The anticipated CS1 baseline vehicle-pulse-index (VPI) target was in the range of 65-67. However, actual dynamic vehicle (barrier) testing was overshadowed with the highest crash pulse from the previous tested vehicles with a VPI of 71. The result from the 35mph NCAP Barrier test was a solid 4-Star (4.7 Star) respectfully. In CS2, the vehicle HYGE Sled development VPI range, from the baseline was 61-62 respectively. Actual NCAP test produced a chest deflection result of 26mm versus the anticipated baseline target of 12mm. The initial assessment of this condition was thought to be due to the vehicles significant VPI increase to 67. A subsequent root cause investigation confirmed a data integrity issue due to the instrumentation. In an effort to establish a true vehicle test data point a second NCAP test was performed but faced similar instrumentation issues. As a result, the chest deflect hit the target of 12.1mm; however a femur load spike, similar to the baseline, now skewed the results. With noted level of performance improvement in chest deflection, the NCAP star was assessed as directional for 5-Star capable performance. With an actual rating of 3-Star due to instrumentation, using data extrapolation raised the ratings to 5-Star. In both cases, no structural changes were made to the surrogate vehicle and the results in each case matched their perspective baseline vehicle platforms. These results proved the PLRD is viable for further development and production implementation.

Efficacy of panoramic radiographs in the preoperative planning of posterior mandibular implants: a prospective clinical study of 1527 consecutively treated patients

OBJECTIVES: Various imaging techniques, including conventional radiography and computed tomography, are proposed to localize the mandibular canal prior to implant surgery. The aim of this study is to determine the incidence of altered mental nerve sensation after implant placement in the posterior segment of the mandible when a panoramic radiograph is the only preoperative imaging technique used. MATERIAL AND METHODS: The study included 1527 partially and totally edentulous patients who had consecutively received 2584 implants in the posterior segment of the mandible. Preoperative bone height was evaluated from the top of the alveolar crest to the superior border of the mandibular canal on a standard panoramic radiograph. A graduated implant scale from the implant manufacturer was used and 2 mm were subtracted as a safety margin to determine the length of the implant to be inserted. RESULTS: No permanent sensory disturbances of the inferior alveolar nerve were observed. There were two cases of postoperative paresthesia, representing 2/2584 (0.08%) of implants inserted in the posterior segment of the mandible or 2/1527 (0.13%) of patients. These sensory disturbances were minor, lasted for 3 and 6 weeks and resolved spontaneously. CONCLUSIONS: Panoramic examination can be considered a safe preoperative evaluation procedure for routine posterior mandibular implant placement. Panoramic radiography is a quick, simple, low-cost and low-dose presurgical diagnostic tool. When a safety margin of at least 2 mm above the mandibular canal is respected, panoramic radiography appears to be sufficient to evaluate available bone height prior to insertion of posterior mandibular implants; cross-sectional imaging techniques may not be necessary.

Congenital retinal macrovessels: description of three cases and review of the literature

BACKGROUND: Congenital retinal macrovessels are large aberrant branches of retinal arteries or veins that cross the macula. We present three patients with a unilateral congenital retinal macrovessel and we conduct a review of the literature. PATIENTS AND METHODS: A 22-year-old man complaining of chronic headache as well as two other men, 18 and 23 years old, respectively, during a routine ophthalmological examination, were found with a unilateral congenital retinal macrovessel each. A thorough ophthalmological examination was performed, including colour fundus photography in all three patients and fluorescein angiography in two of the patients. We followed them up for five years. THERAPY AND OUTCOME: Investigation revealed a unilateral venous congenital retinal macrovessel in all patients. Clinical findings and visual acuity remained unchanged throughout the entire follow-up period. No complications were recorded. CONCLUSIONS: Congenital retinal macrovessels are rare and they tend to remain stable. Visual acuity is preserved in most cases. Complications occur only occasionally and have been described in the literature. Differential diagnosis from other arteriovenous malformations affecting multiple organs is necessary.

A Metallurgical Study of Gold Ores

Gold is widely distributed in the earth's crust in small quantities. Gold is found in nature in two forms; the element itself and the compound gold telluride. In all cases, silver in some proportion is an alloying constituent.

Human and feline invasive cervical resorptions: the missing link?--Presentation of four cases

This report describes 4 patients presenting with multiple teeth affected by invasive cervical resorption (ICR). The cases came to our attention between 2006 and 2008; previously, no cases of multiple ICR (mICR) had been reported in Switzerland. Characteristics common to all 4 cases included progression of disease over time, similar clinical and radiographic appearance of lesions, and obscure etiology. The histologically assessed teeth showed a similar pattern of tooth destruction, with resorptive lesions being confined to the cervical region. Howship's lacunae and multinucleated, tartrate-resistant acid phosphatase-positive odontoclasts were detected. None of the teeth presented with internal resorption. The positive pulp sensitivity corresponded to the histologic findings, indicating that the pulp tissue resisted degradation even in advanced stages of resorptive lesions. Although mICR is rare in humans, a similar disease known as feline odontoclastic resorptive lesions (FORL) is common in domestic, captive, and wild cats. The etiology of FORL, like that of mICR, remains largely unknown. Because FORL has been associated with feline viruses, we asked our mICR patients whether they had had contact with cats, and interestingly, all patients reported having had direct (2 cases) or indirect (2 cases) contact. In addition, blood samples were taken from all patients for neutralization testing of feline herpes virus type 1 (FeHV-1). Indeed, the sera obtained were able to neutralize (2 cases) or partly inhibit (2 cases) replication of FeHV-1, indicating transmission of feline viruses to humans. Future studies on mICR (and FORL) should evaluate the possible role of a (feline) virus as an etiologic (co-)factor in this disease.

Gingival recession following apical surgery in the esthetic zone: a clinical study with 70 cases

The present study evaluated gingival recession 1 year following apical surgery of 70 maxillary anterior teeth (central and lateral incisors, canines, and first premolars). A visual assessment of the mid-facial aspect of the gingival level and of papillary heights of treated teeth was carried out using photographs taken at pre-treatment and 1-year follow-up appointments. In addition, changes in the gingival margin (GM) and clinical attachment levels (CAL) were calculated with the use of clinical measurements, that is, pre-treatment and 1-year follow-up pocket probing depth and level of gingival margin. Changes in GM and CAL were then correlated with patient-, tooth-, and surgery-related parameters. The following parameters were found to significantly influence changes in GM and CAL over time: gingival biotype (P < 0.05), with thin biotype exhibiting more gingival recession than thick biotype; pre-treatment pocket probing depth (PPD) (P < 0.03), with cases of pre-treatment PPD < 2.5 mm demonstrating more attachment loss than cases of PPD > or = 2.5 mm; and type of incision (P < 0.01), with the submarginal incision showing considerably less gingival recession compared with the intrasulcular incision, papilla-base incision or papilla-saving incision. The visual assessment using pre-treatment and 1-year follow-up photographs did not demonstrate significant changes in gingival level or papillary height after apical surgery. In conclusion, gingival biotype, pre-treatment PPD, and type of incision may significantly influence changes in GM and CAL following apical surgery in maxillary anterior teeth.

Severe autoimmune cytopenias in treatment-naive hepatitis C virus infection: clinical description of 16 cases

OBJECTIVE: To describe the prevalence, main characteristics, and treatment of severe autoimmune cytopenias [autoimmune hemolytic anemia (AIHA), autoimmune thrombocytopenic purpura (AITP)] in patients with chronic hepatitis C virus (HCV) infection. METHODS: Retrospective chart review of patients with chronic HCV infection seen at our institution. Two additional departments contributed eight more patients to assess therapy of HCV-related autoimmune cytopenias. RESULTS: Eight patients (seven AITP, one AIHA) fulfilled the inclusion criteria in our population of 4345 HCV-infected patients. The number of patients with AITP was much greater than would be expected by chance (P<0.0001). Patients with HCV-related AITP were older and demonstrated more immunological markers than a group of 40 controls. Eight additional patients (six AITP, two Evans syndrome) were included. We only assessed the response for AITP patients because of the single case of AIHA. Patients with AITP had a poor response to initial corticosteroids [one complete response (CR), three partial response (PR), and four failures]. Intravenous immunoglobulins led to transient efficacy in three of four patients. In second-line therapy, five of seven patients responded to splenectomy. Rituximab proved effective in increasing platelets in two patients. Of eight patients treated with antiviral therapy (IFN-alpha+/-ribavirin), five responded (three CR, two PR). CONCLUSION: AITP occurs more commonly in patients with chronic HCV infection than would be expected by chance. HCV-positive AITP requires a treatment strategy different from that used in HCV-negative AITP. On the basis of the results from our study and a literature analysis, we propose an algorithm for treatment of severe HCV-related autoimmune cytopenias.

Prospective population-based study of RSV-related intermediate care and intensive care unit admissions in Switzerland over a 4-year period (2001-2005)

OBJECTIVES: Respiratory syncytial virus (RSV) infections are a leading cause of hospital admissions in small children. A substantial proportion of these patients require medical and nursing care, which can only be provided in intermediate (IMC) or intensive care units (ICU). This article reports on all children aged < 3 years who required admission to IMC and/or ICU between October 1, 2001 and September 30, 2005 in Switzerland. PATIENTS AND METHODS: We prospectively collected data on all children aged < 3 years who were admitted to an IMC or ICU for an RSV-related illness. Using a detailed questionnaire, we collected information on risk factors, therapy requirements, length of stay in the IMC/ICU and hospital, and outcome. RESULTS: Of the 577 cases reported during the study period, 90 were excluded because the patients did not fulfill the inclusion criteria; data were incomplete in another 25 cases (5%). Therefore, a total of 462 verified cases were eligible for analysis. At the time of hospital admission, only 31 patients (11%) were older than 12 months. Since RSV infection was not the main reason for IMC/ICU admission in 52% of these patients, we chose to exclude this subgroup from further analyses. Among the 431 infants aged < 12 months, the majority (77%) were former near term or full term (NT/FT) infants with a gestational age > or = 35 weeks without additional risk factors who were hospitalized at a median age of 1.5 months. Gestational age (GA) < 32 weeks, moderate to severe bronchopulmonary dysplasia (BPD), and congenital heart disease (CHD) were all associated with a significant risk increase for IMC/ICU admission (relative risk 14, 56, and 10, for GA < or = 32 weeks, BPD, and CHD, respectively). Compared with NT/FT infants, high-risk infants were hospitalized at an older age (except for infants with CHD), required more invasive and longer respiratory support, and had longer stays in the IMC/ICU and hospital. CONCLUSIONS: In Switzerland, RSV infections lead to the IMC/ICU admission of approximately 1%-2% of each annual birth cohort. Although prematurity, BPD, and CHD are significant risk factors, non-pharmacological preventive strategies should not be restricted to these high-risk patients but also target young NT/FT infants since they constitute 77% of infants requiring IMC/ICU admission.

Semiotic Analysis in the Study of Social Work

Research and professional practices have the joint aim of re-structuring the preconceived notions of reality. They both want to gain the understanding about social reality. Social workers use their professional competence in order to grasp the reality of their clients, while researchers’ pursuit is to open the secrecies of the research material. Development and research are now so intertwined and inherent in almost all professional practices that making distinctions between practising, developing and researching has become difficult and in many aspects irrelevant. Moving towards research-based practices is possible and it is easily applied within the framework of the qualitative research approach (Dominelli 2005, 235; Humphries 2005, 280). Social work can be understood as acts and speech acts crisscrossing between social workers and clients. When trying to catch the verbal and non-verbal hints of each others’ behaviour, the actors have to do a lot of interpretations in a more or less uncertain mental landscape. Our point of departure is the idea that the study of social work practices requires tools which effectively reveal the internal complexity of social work (see, for example, Adams & Dominelli & Payne 2005, 294 – 295). The boom of qualitative research methodologies in recent decades is associated with much profound the rupture in humanities, which is called the linguistic turn (Rorty 1967). The idea that language is not transparently mediating our perceptions and thoughts about reality, but on the contrary it constitutes it was new and even confusing to many social scientists. Nowadays we have got used to read research reports which have applied different branches of discursive analyses or narratologic or semiotic approaches. Although differences are sophisticated between those orientations they share the idea of the predominance of language. Despite the lively research work of today’s social work and the research-minded atmosphere of social work practice, semiotics has rarely applied in social work research. However, social work as a communicative practice concerns symbols, metaphors and all kinds of the representative structures of language. Those items are at the core of semiotics, the science of signs, and the science which examines people using signs in their mutual interaction and their endeavours to make the sense of the world they live in, their semiosis. When thinking of the practice of social work and doing the research of it, a number of interpretational levels ought to be passed before reaching the research phase in social work. First of all, social workers have to interpret their clients’ situations, which will be recorded in the files. In some very rare cases those past situations will be reflected in discussions or perhaps interviews or put under the scrutiny of some researcher in the future. Each and every new observation adds its own flavour to the mixture of meanings. Social workers have combined their observations with previous experience and professional knowledge, furthermore, the situation on hand also influences the reactions. In addition, the interpretations made by social workers over the course of their daily working routines are never limited to being part of the personal process of the social worker, but are also always inherently cultural. The work aiming at social change is defined by the presence of an initial situation, a specific goal, and the means and ways of achieving it, which are – or which should be – agreed upon by the social worker and the client in situation which is unique and at the same time socially-driven. Because of the inherent plot-based nature of social work, the practices related to it can be analysed as stories (see Dominelli 2005, 234), given, of course, that they are signifying and told by someone. The research of the practices is concentrating on impressions, perceptions, judgements, accounts, documents etc. All these multifarious elements can be scrutinized as textual corpora, but not whatever textual material. In semiotic analysis, the material studied is characterised as verbal or textual and loaded with meanings. We present a contribution of research methodology, semiotic analysis, which has to our mind at least implicitly references to the social work practices. Our examples of semiotic interpretation have been picked up from our dissertations (Laine 2005; Saurama 2002). The data are official documents from the archives of a child welfare agency and transcriptions of the interviews of shelter employees. These data can be defined as stories told by the social workers of what they have seen and felt. The official documents present only fragmentations and they are often written in passive form. (Saurama 2002, 70.) The interviews carried out in the shelters can be described as stories where the narrators are more familiar and known. The material is characterised by the interaction between the interviewer and interviewee. The levels of the story and the telling of the story become apparent when interviews or documents are examined with the use of semiotic tools. The roots of semiotic interpretation can be found in three different branches; the American pragmatism, Saussurean linguistics in Paris and the so called formalism in Moscow and Tartu; however in this paper we are engaged with the so called Parisian School of semiology which prominent figure was A. J. Greimas. The Finnish sociologists Pekka Sulkunen and Jukka Törrönen (1997a; 1997b) have further developed the ideas of Greimas in their studies on socio-semiotics, and we lean on their ideas. In semiotics social reality is conceived as a relationship between subjects, observations, and interpretations and it is seen mediated by natural language which is the most common sign system among human beings (Mounin 1985; de Saussure 2006; Sebeok 1986). Signification is an act of associating an abstract context (signified) to some physical instrument (signifier). These two elements together form the basic concept, the “sign”, which never constitutes any kind of meaning alone. The meaning will be comprised in a distinction process where signs are being related to other signs. In this chain of signs, the meaning becomes diverged from reality. (Greimas 1980, 28; Potter 1996, 70; de Saussure 2006, 46-48.) One interpretative tool is to think of speech as a surface under which deep structures – i.e. values and norms – exist (Greimas & Courtes 1982; Greimas 1987). To our mind semiotics is very much about playing with two different levels of text: the syntagmatic surface which is more or less faithful to the grammar, and the paradigmatic, semantic structure of values and norms hidden in the deeper meanings of interpretations. Semiotic analysis deals precisely with the level of meaning which exists under the surface, but the only way to reach those meanings is through the textual level, the written or spoken text. That is why the tools are needed. In our studies, we have used the semiotic square and the actant analysis. The former is based on the distinctions and the categorisations of meanings, and the latter on opening the plotting of narratives in order to reach the value structures.