Dispersal patterns in a regional koala population in south-east Queensland

Koala dispersal was investigated as part of a detailed ecological study of a nationally significant koala population located 20 km south-east of Brisbane, Queensland. From 1996 to 2000, 195 koalas from three sites were captured and fitted with radio-collars. A total of 40 koalas ( 23 males and 17 females) dispersed from these sites. Most (93%) dispersing individuals were 20 - 36 months of age. Three adult females ( more than 36 months old) dispersed and no adult males dispersed during the study. A significantly higher proportion of young males dispersed than females. Dispersal occurred between June and December, with most dispersal of males commencing in July and August and that of females commencing between September and November prior to, and early in, the annual breeding season. The mean straight-line distance between the natal and breeding home ranges for males and females was similar and was measured at 3.5 km ( range 1.1 - 9.7 km) and 3.4 km ( range 0.3 - 10.6 km) respectively. Dispersing males and females tended to successfully disperse south and west of their natal home ranges and were generally unable to successfully disperse to urban areas within the study area, as a high proportion of the mortality of dispersing koalas was associated with attacks by domestic dogs and with collisions with vehicles on roads. Information from other studies indicates that most young koalas disperse from their natal areas. It is likely that the social behaviour and mating systems of koala populations provide mechanisms for young koalas to disperse. The potential role of dispersal in the dynamics of regional koala populations is discussed.

Low-density koala (Phascolarctos cinereus) populations in the mulgalands of south-west Queensland. III. Broad-scale patterns of habitat use

To date there have been few quantitative studies of the distribution of, and relative habitat utilisation by, koalas in the mulgalands of Queensland. To examine these parameters we applied habitat-accessibility and relative habitat-utilisation indices to estimates of faecal pellet density sampled at 149 sites across the region. Modelling the presence of pellets using logistic regression showed that the potential range of accessible habitats and relative habitat use varied greatly across the region, with rainfall being probably the most important determinant of distribution. Within that distribution, landform and rainfall were both important factors affecting habitat preference. Modelling revealed vastly different probabilities of finding a pellet under trees depending on the tree species, canopy size, and location within the region.

Low-density koala (Phascolarctos cinereus) populations in the mulgalands of south-west Queensland. II. Distribution and diet

This study used faecal pellets to investigate the broadscale distribution and diet of koalas in the mulgalands biogeographic region of south-west Queensland. Koala distribution was determined by conducting faecal pellet searches within a 30-cm radius of the base of eucalypts on 149 belt transects, located using a multi-scaled stratified sampling design. Cuticular analysis of pellets collected from 22 of these sites was conducted to identify the dietary composition of koalas within the region. Our data suggest that koala distribution is concentrated in the northern and more easterly regions of the study area, and appears to be strongly linked with annual rainfall. Over 50% of our koala records were obtained from non-riverine communities, indicating that koalas in the study area are not primarily restricted to riverine communities, as has frequently been suggested. Cuticular analysis indicates that more than 90% of koala diet within the region consists of five eucalypt species. Our data highlights the importance of residual Tertiary landforms to koala conservation in the region.

Species of Stephanostomum Looss, 1899 (Digenea : Acanthocolpidae) from fishes of Australian and South Pacific waters, including five new species

Nine species of Stephanostomum are described from Australian and Southern Pacific marine fishes: Stephanostomum madhaviae n. sp. [syn. S. orientalis of Madhavi ( 1976)] from Caranx ignobilis, off Hope Island, Queensland, with 30-34 circum-oral spines and vitelline fields almost reaching to the posterior extremity of the cirrus-sac; S. bicoronatum (Stossich, 1883) from Argyrosomus hololepidotus, off Southport Broadwater, Queensland; S. votonimoli n. sp. from Scomberoides lysan, off Moorea, French Polynesia ( type-locality) and Western Samoa, with 33-38 circum-oral spines, a uroproct and the vitelline fields not reaching the cirrus-sac; S. nyoomwa n. sp. from Caranx sexfasciatus, off Heron Island, Queensland, with 33-38 circum-oral spines, a uroproct and the vitelline fields reaching the cirrus-sac; S. cobia n. sp. from Rachycentron canadum, off Heron Island, with 36 circum-oral spines, a uroproct and the vitelline fields reaching the cirrus-sac; S. petimba Yamaguti, 1970 from Seriola hippos, off Rottnest Island, Western Australia; S. pacificum ( Yamaguti, 1951) from Pseudocaranx wrighti, off Fremantle, Western Australia; S. aaravi n. sp. from Lethrinus miniatus, off Heron Island, with 36-39 circumoral spines, probably a uroproct and the vitelline fields reaching the ventral sucker; S. pagrosomi ( Yamaguti, 1939) from L. nebulosus, L. miniatus and L. atkinsoni off Heron Island, Pagrus auratus, off Rottnest Island, Western Australia and Gymnocranius audleyi, off Heron Island. A digest of described species of Stephanostomum is included as an appendix.

A modified Weibull distribution

A new lifetime distribution capable of modeling a bathtub-shaped hazard-rate function is proposed. The proposed model is derived as a limiting case of the Beta Integrated Model and has both the Weibull distribution and Type I extreme value distribution as special cases. The model can be considered as another useful 3-parameter generalization of the Weibull distribution. An advantage of the model is that the model parameters can be estimated easily based on a Weibull probability paper (WPP) plot that serves as a tool for model identification. Model characterization based on the WPP plot is studied. A numerical example is provided and comparison with another Weibull extension, the exponentiated Weibull, is also discussed. The proposed model compares well with other competing models to fit data that exhibits a bathtub-shaped hazard-rate function.

Warranty and optimal reliability improvement through product development

For products sold with warranty, the warranty servicing cost can be reduced by improving product reliability through a development process. However, this increases the unit manufacturing cost. Optimal development must achieve a trade-off between these two costs. The outcome of the development process is uncertain and needs to be taken into account in the determination of the optimal development effort. The paper develops a model where this uncertainty is taken into account. (C) 2003 Elsevier Ltd. All rights reserved.

Repair-replace strategies for two-dimensional warranty policies

For repairable items sold with free replacement warranty, the actions available to the manufacturer to rectify failures under warranty are to (1) repair the failed item or (2) replace it with a new one. A proper repair-replace strategy can reduce the expected cost of servicing the warranty. In this paper, we study repair-replace strategies for items sold with a two-dimensional free replacement warranty. (C) 2003 Elsevier Ltd. All rights reserved.

Study of n-fold Weibull competing risk model

This paper deals with an n-fold Weibull competing risk model. A characterisation of the WPP plot is given along with estimation of model parameters when modelling a given data set. These are illustrated through two examples. A study of the different possible shapes for the density and failure rate functions is also presented. (C) 2003 Elsevier Ltd. All rights reserved.

COMMENTARY: Understanding South Asian dowry violence

This Article does not have an abstract.

Complete genomic sequence of the Australian south-west genotype of Sindbis virus: Comparisons with other Sindbis strains and identification of a unique deletion in the 3 '-untranslated region

Our previous studies have shown that two distinct genotypes of Sindbis (SIN) virus occur in Australia. One of these, the Oriental/Australian type, circulates throughout most of the Australian continent, whereas the recently identified south-west (SW) genetic type appears to be restricted to a distinct geographic region located in the temperate south-west of Australia. We have now determined the complete nucleotide and translated amino acid sequences of a SW isolate of SIN virus (SW6562) and performed comparative analyses with other SIN viruses at the genomic level. The genome of SW6562 is 11,569 nucleotides in length, excluding the cap nucleotide and poly (A) tail. Overall this virus differs from the prototype SIN virus (strain AR339) by 23% in nucleotide sequence and 12.5% in amino acid sequence. Partial sequences of four regions of the genome of four SW isolates were determined and compared with the corresponding sequences from a number of SIN isolates from different regions of the World. These regions are the non-structural protein (nsP3), the E2 gene, the capsid gene, and the repeated sequence elements (RSE) of the 3'UTR. These comparisons revealed that the SW SIN viruses were more closely related to South African and European strains than to other Australian isolates of SIN virus. Thus the SW genotype of SIN virus may have been introduced into this region of Australia by viremic humans or migratory birds and subsequently evolved independently in the region. The sequence data also revealed that the SW genotype contains a unique deletion in the RSE of the 3'UTR region of the genome. Previous studies have shown that deletions in this region of the SIN genome can have significant effects on virus replication in mosquito and avian cells, which may explain the restricted distribution of this genotype of SIN virus.