Estudantes do ensino superior, praxe académica e satisfação com a vida

Estudam-se perceções dos estudantes do ensino superior relativamente à existência ou não de violência nas praxes e relacionam-se essas perceções com níveis de satisfação com a vida. A amostra foi constituída por 585 estudantes de duas instituições do ensino superior português e os dados recolhidos através de um processo de inquérito por questionário. Globalmente, os resultados indicam que entre 10% e 11% dos estudantes apontam as praxes como contendo alguma violência. Indicam, ainda, que os níveis de satisfação com a vida apresentam correlação negativa, mas muito baixa, com a perceção dos estudantes sobre a violência nas praxes.

Efeito de glucanas do fungo Caripia montagnei em modelo de inflamação intestinal induzida por tnbs em ratos Wistar e em células de carcinoma de cólon humano HT-29

Compounds derived from fungi has been the subject of many studies in order to broaden the knowledge of their bioactive potential. Polysaccharides from Caripia montagnei have been described to possess anti-inflammatory and antioxidant properties. In this study, glucans extracted from Caripia montagnei mushroom were chemically characterized and their effects evaluated at different doses and intervals of treatment. It was also described their action on colonic injury in the model of colitis induced by 2,4,6-trinitrobenzene sulfonic acid (TNBS), and its action on cells of the human colon carcinoma (HT-29). Compounds extracted of C. montagnei contain high level of carbohydrates (96%), low content of phenolic compounds (1.5%) and low contamination with proteins (2.5%). The (FT-IR) and (NMR) analysis showed that polysaccharides from this species of mushroom are composed of α- and β-glucans. The colonic damage was evaluated by macroscopic, histological, biochemical and immunologic analyses. The results showed a reduction of colonic lesions in all groups treated with the glucans of Caripia montagnei (GCM). GCM significantly reduced the levels of IL-6 (50 and 75 mg/kg, p < 0.05), a major inflammatory cytokine. Biochemical analyses showed that such glucans acted on reducing levels of alkaline phosphatase (75 mg/kg, p < 0.01), nitric oxide (p < 0.001), and myeloperoxidase (p < 0.001). These results were confirmed microscopically by the reduction of cellular infiltration. The increase of catalase activity suggest a protective effect of GCM on colonic tissue, confirming their anti-inflammatory potential. GCM displayed cytostatic activity against HT-29 cells, causing accumulation of cells in G1 phase, blocking the cycle cell progression. Those glucans also showed ability to modulate the adhesion of HT-29 cells to Matrigel® and reduced the oxidative stress. The antiproliferative activity against HT-29 cells displayed by GCM (p <0.001) can be attributed to its cytostatic activity and induction of apoptosis by GCM

Estandarización del método para alcoholemias por cromatografía de gases

La ingesta de etanol se ha relacionado a consecuencias lamentables a nivel social, familiar y jurídico; siendo importante el desarrollo de métodos de detección de etanol en sangre, prueba más confiable a nivel cuantitativo. En el presente trabajo se realizó la primera fase de la optimización de un método para el análisis de alcoholemia por cromatografía de gases con inyección directa y detección de ionización de llama (GC-FID). Se realizó la optimización de algunos parámetros cualitativos y cuantitativos, incluyendo tiempos de retención estables, selectividad del método demostrado por la ausencia de sustancias interferentes en el análisis; linealidad a bajos niveles con un coeficiente de determinación de R2 = 0.996. La aplicabilidad del método en un pool de 33 muestras con distintas concentraciones de etanol tomadas cómo puntos de referencia de baja, media y alta concentración. La cuantificación se realizó por estandarización interna mediante el uso de un estándar interno (n-butanol) y la estandarización externa mediante la curva de calibración a 4 niveles.

Investigating problem-based learning in Saudi Arabian mathematics education: a TIMSS-related study

The aim of this study is to investigate the effectiveness of problem-based learning (PBL) on students’ mathematical performance. This includes mathematics achievement and students’ attitudes towards mathematics for third and eighth grade students in Saudi Arabia. Mathematics achievement includes, knowing, applying, and reasoning domains, while students’ attitudes towards mathematics covers, ‘Like learning mathematics’, ‘value mathematics’, and ‘a confidence to learn mathematics’. This study goes deeper to examine the interaction of a PBL teaching strategy, with trained face-to-face and self-directed learning teachers, on students’ performance (mathematics achievement and attitudes towards mathematics). It also examines the interaction between different ability levels of students (high and low levels) with a PBL teaching strategy (with trained face-to-face or self-directed learning teachers) on students’ performance. It draws upon findings and techniques of the TIMSS international benchmarking studies. Mixed methods are used to analyse the quasi-experimental study data. One -way ANOVA, Mixed ANOVA, and paired t-tests models are used to analyse quantitative data, while a semi-structured interview with teachers, and author’s observations are used to enrich understanding of PBL and mathematical performance. The findings show that the PBL teaching strategy significantly improves students’ knowledge application, and is better than the traditional teaching methods among third grade students. This improvement, however, occurred only with the trained face-to-face teacher’s group. Furthermore, there is robust evidence that using a PBL teaching strategy could raise significantly students’ liking of learning mathematics, and confidence to learn mathematics, more than traditional teaching methods among third grade students. Howe ver, there was no evidence that PBL could improve students’ performance (mathematics achievement and attitudes towards mathematics), more than traditional teaching methods, among eighth grade students. In 8th grade, the findings for low achieving students show significant improvement compared to high achieving students, whether PBL is applied or not. However, for 3th grade students, no significant difference in mathematical achievement between high and low achieving students was found. The results were not expected for high achieving students and this is also discussed. The implications of these findings for mathematics education in Saudi Arabia are considered.

Otimização dos parâmetros de maquinagem no processo de fresagem

Cada vez mais, os principais objetivos na indústria é a produção a baixo custo, com a máxima qualidade e com o tempo de fabrico o mais curto possível. Para atingir esta meta, a indústria recorre, frequentemente, às máquinas de comando numérico (CNC), uma vez que com esta tecnologia torna se capaz alcançar uma elevada precisão e um tempo de processamento mais baixo. As máquinas ferramentas CNC podem ser aplicadas em diferentes processos de maquinagem, tais como: torneamento, fresagem, furação, entre outros. De todos estes processos, o mais utilizado é a fresagem devido à sua versatilidade. Utiliza-se normalmente este processo para maquinar materiais metálicos como é o caso do aço e dos ferros fundidos. Neste trabalho, são analisados os efeitos da variação de quatro parâmetros no processo de fresagem (velocidade de corte, velocidade de avanço, penetração radial e penetração axial), individualmente e a interação entre alguns deles, na variação da rugosidade num aço endurecido (aço 12738). Para essa análise são utilizados dois métodos de otimização: o método de Taguchi e o método das superfícies. O primeiro método foi utilizado para diminuir o número de combinações possíveis e, consequentemente, o número de ensaios a realizar é denominado por método de Taguchi. O método das superfícies ou método das superfícies de resposta (RSM) foi utilizado com o intuito de comparar os resultados obtidos com o método de Taguchi, de acordo com alguns trabalhos referidos na bibliografia especializada, o RSM converge mais rapidamente para um valor ótimo. O método de Taguchi é muito conhecido no setor industrial onde é utilizado para o controlo de qualidade. Apresenta conceitos interessantes, tais como robustez e perda de qualidade, sendo bastante útil para identificar variações do sistema de produção, durante o processo industrial, quantificando a variação e permitindo eliminar os fatores indesejáveis. Com este método foi vi construída uma matriz ortogonal L16 e para cada parâmetro foram definidos dois níveis diferentes e realizados dezasseis ensaios. Após cada ensaio, faz-se a medição superficial da rugosidade da peça. Com base nos resultados obtidos das medições da rugosidade é feito um tratamento estatístico dos dados através da análise de variância (Anova) a fim de determinar a influência de cada um dos parâmetros na rugosidade superficial. Verificou-se que a rugosidade mínima medida foi de 1,05m. Neste estudo foi também determinada a contribuição de cada um dos parâmetros de maquinagem e a sua interação. A análise dos valores de “F-ratio” (Anova) revela que os fatores mais importantes são a profundidade de corte radial e da interação entre profundidade de corte radial e profundidade de corte axial para minimizar a rugosidade da superfície. Estes têm contribuições de cerca de 30% e 24%, respetivamente. Numa segunda etapa este mesmo estudo foi realizado pelo método das superfícies, a fim de comparar os resultados por estes dois métodos e verificar qual o melhor método de otimização para minimizar a rugosidade. A metodologia das superfícies de resposta é baseada num conjunto de técnicas matemáticas e estatísticas úteis para modelar e analisar problemas em que a resposta de interesse é influenciada por diversas variáveis e cujo objetivo é otimizar essa resposta. Para este método apenas foram realizados cinco ensaios, ao contrário de Taguchi, uma vez que apenas em cinco ensaios consegue-se valores de rugosidade mais baixos do que a média da rugosidade no método de Taguchi. O valor mais baixo por este método foi de 1,03μm. Assim, conclui-se que RSM é um método de otimização mais adequado do que Taguchi para os ensaios realizados. Foram obtidos melhores resultados num menor número de ensaios, o que implica menos desgaste da ferramenta, menor tempo de processamento e uma redução significativa do material utilizado.

Avaliação de concretos reforçados por confinamento com manta de fibra de vidro estrutural e pré-impreganada

Due to the occurrence of diseases in the use of structural reinforcements in composites, with presentation of concrete blanket detachment, has been identified the need to evaluate the performance of concrete reinforced with glass fiber. This study aims to evaluate these concretes by means of testing methodologies, using concrete with low resistance with structural reinforcement for confinement by preimpregnated glass fiber and traditional fiberglass blanket. The first stage of work was the development of methodologies for analysis, opting for four types, such as the acoustic survey, strength to compressive, the pull-off and ultrasound. Next, tests were carried out using the four selected methodologies in 30 of proof-of-specimens by 5x10 cm, 15 were reinforced with the traditional fiberglass blanket with 5specimens exposed to test a marine environment of marine coastline of Natal-RN and 15 were reinforced with a pre-impregnated glass fiber blanket, as well as 5specimens exposed to a test environment of the marine coastline of Natal-RN. After conducting the acoustic survey, it has been verified a lack of delaminating and air bubbles in the samples, confirming the absence of gross shortcomings in the implementation of the ribs both the traditional fiberglass blanket and in the preimpregnated fiber glass blanket. After carrying out methods of pull-off and compressive strengthening test it was observed that the reinforced proof-bodies with pre-impregnated glass blanket showed maximum stresses higher than the traditional fiberglass blanket; consequently a greater grip with the formation of a smaller area of . fracture, unlike traditional glass mat, which showed lower maximum stresses, with a greater area of fracture. It was also found that the traditional fiberglass blanket presented detachment of blanket-concrete interface, unlike the pre-impregnated fiberglass blanket, which showed a better grip on the blanket-concrete interface. In the trial of ultrasound there was no presence of cracks in the blanket-concrete interface, yielding to both blankets good compactness of the concrete. At the end of this work, they were developed and proposed two methods of testing for evaluation of reinforced concrete structures with composites, for standardization, the acoustic survey and pull-off

STORYTELLING, EMOTION UNDERSTANDING, AND KINDERGARTNERS’ SOCIAL COMPETENCE

Interpreting others’ emotions is theoretically foundational for children’s social competence, yet little research contrasts Emotion Understanding (EU) types against their theoretical correlates. This study investigated kindergartners’ situationistic EU (attributing emotions based on external events) and mentalistic EU (attributing emotions from others’ mental states) in relation to Theory of Mind (ToM) and social skills, as rated by parents and teachers. The EU measures were expected to have low associations with one another and to relate differently to ToM and select social skills. Mentalistic EU was expected to be an important predictor of teacher-rated social skills. Results supported the hypothesis that mentalistic EU and situationistic EU are distinct constructs. However, both relate to ToM. Furthermore, while ToM and situationistic EU variables were included in the regression model, only vocabulary and mentalistic EU were significant predictors for teacher-rated social skills. Results indicate the importance of mentalistic EU in aspects of kindergartners’ social competence.

The Predation of Artemia Nauplii by the Larvae of the Amazon River Prawn, Macrobrachium amazonicum (Heller, 1862), is Affected by Prey Density, Time of Day, and Ontogenetic Development

The present study analyzed the effects of prey density, the time of day, and ontogenetic development on the predation of Artemia nauplii by the larvae of the Amazon river prawn, Macrobrachium amazonicum, as well as possible synergy among these factors. Larvae were raised in 120-L tanks with biological filter systems, and fed on recently hatched Artemia nauplii, using two feeding management protocols: (a) fed once per day at 2000 h (high density HD) and (b) half of the ration provided at 2000 h, complemented at 0800 h the following day by a replacement of the nauplii consumed up to a maximum of the full ration (low density with replacement LDWR). Each treatment consisted of six replicates. The consumption of nauplii was estimated prior to the feeding times. Consumption varied according to time of day, ontogenetic development, and feeding protocol. The larvae ingested more nauplii during the daytime at most developmental stages. Ingestion rates were similar during the day under both treatments, but at night the higher density of prey in the HD treatment caused a higher encounter rate and increased ingestion of nauplii by the larvae. Among the performance indicators only survival was greater in HD in comparison with LDWR; productivity and dry weight were similar. The results indicate a circadian trophic rhythm in M. amazonicum, with the encounter rate being an important mechanism for the capture of prey during the night. A second mechanism probably the visual system aids the perception of prey during the daytime. Based on these results, we suggest that feeding captive Amazon river prawn larvae only once a day would be appropriate and economically beneficial. Further work is necessary to determine the most effective time that this single feed should be applied.

Caracterização da estruturação espacial dos povoamentos da epifauna do litoral rochoso do distrito de Mercúfi. província de Cabo Delgado (Norte de Moçambique), com uso de Sistema de Informação Geográfica: distribuição, abundância, diversidade e conservação

Dissertação de mest. em Estudos Marinhos e Costeiros, Faculdade de Ciências do Mar e do Ambiente, Univ. do Algarve, 2002

Efeito da adição do poli(etileno acrilato de metila) (ema) e da fibra de linter de algodão nas propriedades do poli(tereftalato de etileno) reciclado (petrec)

The development of new materials to fill the demand of technological advances is a challenge for many researchers around the world. Strategies such as making blends and composites are promising alternatives to produce materials with different properties from those found in conventional polymers. The objective of this study is to evaluate the effect of adding the copolymer poly(ethylene methyl acrylate) (EMA) and cotton linter fibers (LB) on the properties of recycled poly(ethylene terephthalate) (PETrec) by the development of PETrec/EMA blend and PETrec/EMA/LB blend composite. In order to improve the properties of these materials were added as compatibilizers: Ethylene - methyl acrylate - glycidyl methacrylate terpolymer (EMA-GMA) and maleic anhydride grafted polyethylene (PE-g-MA). The samples were produced using a single screw extruder and then injection molded. The obtained materials were characterized by thermogravimetry (TG), melt flow index (MFI) mensurements, torque rheometry, pycnometry to determinate the density, tensile testing and scanning electron microscopy (SEM). The rheological results showed that the addition of the EMA copolymer increased the viscosity of the blend and LB reduces the viscosity of the blend composite. SEM analysis of the binary blend showed poor interfacial adhesion between the PETrec matrix and the EMA dispersed phase, as well as the blend composite of PETrec/EMA/LB also observed low adhesion with the LB fiber. The tensile tests showed that the increase of EMA percentage decreased the tensile strength and the Young s modulus, also lower EMA percentage samples had increased the elongation at break. The blend composite showed an increase in the tensile strength and in the Young`s modulus, and a decrease in the elongation at break. The blend formulations with lower EMA percentages showed better mechanical properties that agree with the particle size analysis which showed that these formulations presented a smaller diameter of the dispersed phase. The blend composite mechanical tests showed that this material is stronger and stiffer than the blend PETrec/EMA, whose properties have been reduced due to the presence of EMA rubbery phase. The use of EMA-GMA was effective in reducing the particle size of the EMA dispersed phase in the PETrec/EMA blend and PE-g-MA showed evidences of reaction with LB and physical mixture with the EMA

Uso de argilominerais e diatomita como adsorvente de fenóis em águas produzidas na indústria de petróleo

The oil production in Brazil has been increasing each year. Consequently, increasing volumes of water produced are generated with large quantities of contaminants, which brings many problems in disposing of these waters. The concern that the concentrations of contaminants in water produced meet existing laws for disposal of effluents, has been extremely important for the development of different techniques for treatment of water produced. The study of clay minerals as adsorbents of organic contaminants has grown considerably so in order to combine the low cost with the efficiency of environmental preservation and health issues. Thus, this study aims to understand the characteristics of vermiculite clay, sodium bentonite, calcium bentonite and diatomite and evaluate their performance as adsorbents for phenol in the water produced. Through adsorption isotherms it was possible to observe the behavior of these adsorptive clay and diatomite for adsorption of phenol, the main phenolic compound found in water produced. Different concentrations of synthetic solutions of phenol were put in touch with these adsorbents under same conditions of agitation and temperature. The adsorbents were composted adsorptive favorable, but the vermiculite and diatomite showed little capacity for absorption, being suggested for absorbs small concentrations of phenol in the balance isothermal

Typologies and spatialization of agricultural production systems in Rondônia, Brazil: linking land use, socioeconomics and territorial configuration.

The current Amazon landscape consists of heterogeneous mosaics formed by interactions between the original forest and productive activities. Recognizing and quantifying the characteristics of these landscapes is essential for understanding agricultural production chains, assessing the impact of policies, and in planning future actions. Our main objective was to construct the regionalization of agricultural production for Rondônia State (Brazilian Amazon) at the municipal level. We adopted a decision tree approach, using land use maps derived from remote sensing data (PRODES and TerraClass) combined with socioeconomic data. The decision trees allowed us to allocate municipalities to one of five agricultural production systems: (i) coexistence of livestock production and intensive agriculture; (ii) semi-intensive beef and milk production; (iii) semi-intensive beef production; (iv) intensive beef and milk production, and; (v) intensive beef production. These production systems are, respectively, linked to mechanized agriculture (i), traditional cattle farming with low management, with (ii) or without (iii) a significant presence of dairy farming, and to more intensive livestock farming with (iv) or without (v) a significant presence of dairy farming. The municipalities and associated production systems were then characterized using a wide variety of quantitative metrics grouped into four dimensions: (i) agricultural production; (ii) economics; (iii) territorial configuration, and; (iv) social characteristics. We found that production systems linked to mechanized agriculture predominate in the south of the state, while intensive farming is mainly found in the center of the state. Semi-intensive livestock farming is mainly located close to the southwest frontier and in the north of the state, where human occupation of the territory is not fully consolidated. This distributional pattern reflects the origins of the agricultural production system of Rondônia. Moreover, the characterization of the production systems provides insights into the pattern of occupation of the Amazon and the socioeconomic consequences of continuing agricultural expansion.

Avaliação dos principais programas de boas práticas agropecuárias implantados no Brasil para promover a sustentabilidade da cadeia leiteira

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Agronomia e Medicina Veterinária, 2016.

The relationship between changes in cardiovascular function and changes in VO2peak following SIT

Thesis (Master, Kinesiology & Health Studies) -- Queen's University, 2016-09-27 19:34:16.86

Population parameters of the smooth lantern shark, Etmopterus pusillus, in southern Portugal (NE Atlantic)

Etmopterus pusillus is a deep water lantern shark with a widespread global distribution that is caught in large quantities in some areas, but is usually discarded due to the low commercial value. In this work, the population biology was studied and life history parameters determined for the first time in this species. Age was estimated from sections of the second dorsal spine and validated by marginal increment analysis. Males attained a maximum age of 13 years, while 17-year-old females were found. Several growth models were fitted and compared for both size and weight at age data, showing that even though this is a small sized species, it has a relatively slow growth rate. This species matures late and at a relatively large size: at 86.81% and 79.40% of the maximum observed sizes and at 58.02% and 54.40% of the maximum observed ages for males and females, respectively. It has a low fecundity, with a mean ovarian fecundity of 10.44 oocytes per reproductive cycle. The estimated parameters indicate that this species has a vulnerable life cycle, typical of deep water squalid sharks. Given the high fishing pressures that it is suffering in the NE Atlantic, the smooth lantern shark may be in danger of severe declines in the near future. (c) 2007 Elsevier B.V. All rights reserved.