SISAL - Um sistema supervisório para elevação artificial de petróleo

MEDEIROS, Adelardo A. D. et al. SISAL - Um Sistema Supervisório para Elevação Artificial de Petróleo. In: Rio Oil and Gas Expo Conference, 2006, Rio de Janeiro, RJ. Anais... Rio de Janeiro, 2006.

Coupling of magnetic, strain and electric polarization fields in the structure of multiferroic material

The comprehensive study on the coupling of magnetism, electrical polarization and the crystalline lattice with the off-stoichiometric effects in self-doped multiferroic hexagonal h-LuMnxO3±δ (0.92≤x≤1.12) ceramic oxides was carried out for the PhD work. There is a complex coupling of the three ferroic degrees. The cancelation of the magnetic moments of ions in the antiferromagnetic order, electric polarization with specific vortex/antivortex topology and lattice properties have pushed researchers to find out ways to disclose the underlying physics and chemistry of magneto-electric and magneto-elastic couplings of h-RMnO3 multiferroic materials. In this research work, self-doping of Lu-sites or Mn-sites of h-LuMnxO3±δ ceramics prepared via solid state route was done to pave a way for deeper understanding of the antiferromagnetic transition, the weak ferromagnetism often reported in the same crystalline lattices and the ferroelectric properties coupled to the imposed lattice changes. Accordingly to the aim of the PhD thesis, the objectives set for the sintering study in the first chapter on experimental results were two. First, study of sintering off-stoichiometric samples within conditions reported in the bibliography and also extracted from the phase diagrams of the LuMnxO3±δ, with a multiple firings ending with a last high temperature step at 1300ºC for 24 hours. Second, explore longer annealing times of up to 240 hours at the fixed temperature of 1300 ºC in a search for improving the properties of the solid solution under study. All series of LuMnxO3±δ ceramics for each annealing time were characterized to tentatively build a framework enabling comparison of measured properties with results of others available in literature. XRD and Rietveld refinement of data give the evolution the lattice parameters as a function to x. Shrinkage of the lattice parameters with increasing x values was observed, the stability limit of the solid solution being determined by analysis of lattice parameters. The evolution of grain size and presence of secondary phases have been investigated by means of TEM, SEM, EDS and EBSD techniques. The dependencies of grain growth and regression of secondary phases on composition x and time were further characterized. Magnetic susceptibility of samples and magnetic irreversibility were extensively examined in the present work. The dependency of magnetic susceptibility, Neel ordering transition and important magnetic parameters are determined and compared to observation in other multiferroics in the following chapter of the thesis. As a tool of high sensitivity to detect minor traces of the secondary phase hausmannite, magnetic measurements are suggested for cross-checking of phase diagrams. Difficulty of previous studies on interpreting the magnetic anomaly below 43 K in h-RMnO3 oxides was discussed and assigned to the Mn3O4 phase, with supported of the electron microscopy. Magneto-electric coupling where AFM ordering is coupled to dielectric polarization is investigated as a function of x and of sintering condition via frequency and temperature dependent complex dielectric constant measurements in the final chapter of the thesis. Within the limits of solid solubility, the crystalline lattice of off-stoichiometric ceramics was shown to preserve the magneto-electric coupling at TN. It represents the first research work on magneto-electric coupling modified by vacancy doping to author’s knowledge. Studied lattices would reveal distortions at the atomic scale imposed by local changes of x dependent on sintering conditions which were widely inspected by using TEM/STEM methods, complemented with EDS and EELS spectroscopy all together to provide comprehensive information on cross coupling of distortions, inhomogeneity and electronic structure assembled and discussed in a specific chapter. Internal interfaces inside crystalline grains were examined. Qualitative explanations of the measured magnetic and ferroelectric properties were established in relation to observed nanoscale features of h-LuMnxO3±δ ceramics. Ferroelectric domains and topological defects are displayed both in TEM and AFM/PFM images, the later technique being used to look at size, distribution and switching of ferroelectric domains influenced by vacancy doping at the micron scale bridging to complementary TEM studies on the atomic structure of ferroelectric domains. In support to experimental study, DFT simulations using Wien2K code have been carried out in order to interpret the results of EELS spectra of O K-edge and to obtain information on the cation hybridization to oxygen ions. The L3,2 edges of Mn is used to access the oxidation state of the Mn ions inside crystalline grains. In addition, rehybridization driven ferroelectricity is also evaluated by comparing the partial density of states of the orbitals of all ions of the samples, also the polarization was calculated and correlated to the off-stoichiometric effect.

Estudo empírico de antecedentes do sucesso de sistemas de informação: análise de um sistema de apoio à decisão em uma universidade pública

Universities are institutions that generate and manipulate large amounts of data as a result of the multiple functions they perform, of the amount of involved professionals and students they attend. Information gathered from these data is used, for example, for operational activities and to support decision-making by managers. To assist managers in accomplishing their tasks, the Information Systems (IS) are presented as tools that offer features aiming to improve the performance of its users, assist with routine tasks and provide support to decision-making. The purpose of this research is to evaluate the influence of the users features and of the task in the success of IS. The study is of a descriptive-exploratory nature, therefore, the constructs used to define the conceptual model of the research are known and previously validated. However, individual features of users and of the task are IS success antecedents. In order to test the influence of these antecedents, it was developed a decision support IS that uses the Multicriteria Decision Aid Constructivist (MCDA-C) methodology with the participation and involvement of users. The sample consisted of managers and former managers of UTFPR Campus Pato Branco who work or have worked in teaching activities, research, extension and management. For data collection an experiment was conducted in the computer lab of the Campus Pato Branco in order to verify the hypotheses of the research. The experiment consisted of performing a distribution task of teaching positions between the academic departments using the IS developed. The task involved decision-making related to management activities. The data that fed the system used were real, from the Campus itself. A questionnaire was answered by the participants of the experiment in order to obtain data to verify the research hypotheses. The results obtained from the data analysis partially confirmed the influence of the individual features in IS success and fully confirmed the influence of task features. The data collected failed to support significant ratio between the individual features and the individual impact. For many of the participants the first contact with the IS was during the experiment, which indicates the lack of experience with the system. Regarding the success of IS, the data revealed that there is no significance in the relationship between Information Quality (IQ) and Individual Impact (II). It is noteworthy that the IS used in the experiment is to support decision-making and the information provided by this system are strictly quantitative, which may have caused some conflict in the analysis of the criteria involved in the decision-making process. This is because the criteria of teaching, research, extension and management are interconnected such that one reflects on another. Thus, the opinion of the managers does not depend exclusively on quantitative data, but also of knowledge and value judgment that each manager has about the problem to be solved.

Elaboração de manual de uso do Sistema de Informação Legislativa (SILEG) na SGM : uma proposta de construção colaborativa do instrumento

O estudo objetiva propor a elaboração de um manual colaborativo dos procedimentos executados no Sistema de Informações Legislativas – SILEG dentro da Secretaria-Geral da Mesa – SGM, utilizando a ferramenta wiki.

Interoperabilidade, processamento e análise visual de dados geográficos

Esta dissertação apresenta uma arquitectura interoperável que permite lidar com a obtenção, manipulação, processamento e análise de informação geográfica. A aplicação 30, implementada como parte da arquitectura, para além de permitir a visualização e manipulação de dados dentro de um ambiente 30, oferece métodos que permitem descobrir, aceder e usar geo-processos, disponíveis através de serviços Web. A interacção com o utilizador é também feita através uma abordagem que quebra a típica complexidade que a maioria dos Sistemas de Informação Geográfica apresenta. O recurso à programação visual reduz a complexidade do sistema, e permite aos operadores tirar proveito da localização e de uma abstracção de um processo complexo, onde as unidades de processamento são representadas no terreno através de componentes 30 que podem ser directamente manipuladas e ligadas de modo a criar encandeamentos complexos de processos. Estes processos podem também ser criados visualmente e disponibilizados online. ABSTRACT; This thesis presents an interoperable architecture mainly designed for manipulation, processing and geographical information analysis. The three-dimensional interface, implemented as part of the architecture, besides allowing the visualization and manipulation of spatial data within a 30 environment, offers methods for discovering, accessing and using geo-processes, available through Web Services. Furthermore, the user interaction is done through an approach that breaks the typical complexity of most Geographic information Systems. This simplicity is in general archived through a visual programming approach that allows operators to take advantage of location, and use processes through abstract representations. Thus, processing units are represented on the terrain through 30 components, which can be directly manipulated and linked to create complex process chains. New processes can also be visually created and deployed online.

Adsorção de corantes têxteis aniônicos e catiônicos em resíduos do processamento de fios de algodão modificados quimicamente

The textile industry generates a large volume of high organic effluent loading whoseintense color arises from residual dyes. Due to the environmental implications caused by this category of contaminant there is a permanent search for methods to remove these compounds from industrial waste waters. The adsorption alternative is one of the most efficient ways for such a purpose of sequestering/remediation and the use of inexpensive materials such as agricultural residues (e.g., sugarcane bagasse) and cotton dust waste (CDW) from weaving in their natural or chemically modified forms. The inclusion of quaternary amino groups (DEAE+) and methylcarboxylic (CM-) in the CDW cellulosic structure generates an ion exchange capacity in these formerly inert matrix and, consequently, consolidates its ability for electrovalent adsorption of residual textile dyes. The obtained ionic matrices were evaluated for pHpcz, the retention efficiency for various textile dyes in different experimental conditions, such as initial concentration , temperature, contact time in order to determine the kinetic and thermodynamic parameters of adsorption in batch, turning comprehensive how does occur the process, then understood from the respective isotherms. It was observed a change in the pHpcz for CM--CDW (6.07) and DEAE+-CDW (9.66) as compared to the native CDW (6.46), confirming changes in the total surface charge. The ionized matrices were effective for removing all evaluated pure or residual textile dyes under various tested experimental conditions. The kinetics of the adsorption process data had best fitted to the model a pseudosecond order and an intraparticle diffusion model suggested that the process takes place in more than one step. The time required for the system to reach equilibrium varied according to the initial concentration of dye, being faster in diluted solutions. The isotherm model of Langmuir was the best fit to the experimental data. The maximum adsorption capacity varied differently for each tested dye and it is closely related to the interaction adsorbent/adsorbate and dye chemical structure. Few dyes obtained a linear variation of the balance ka constant due to the inversion of temperature and might have influence form their thermodynamic behavior. Dyes that could be evaluated such as BR 18: 1 and AzL, showed features of an endothermic adsorption process (ΔH° positive) and the dye VmL presented exothermic process characteristics (ΔH° negative). ΔG° values suggested that adsorption occurred spontaneously, except for the BY 28 dye, and the values of ΔH° indicated that adsorption occurred by a chemisorption process. The reduction of 31 to 51% in the biodegradability of the matrix after the dye adsorption means that they must go through a cleaning process before being discarded or recycled, and the regeneration test indicates that matrices can be reused up to five times without loss of performance. The DEAE+-CDW matrix was efficient for the removal of color from a real textile effluent reaching an UV-Visible spectral area decrease of 93% when applied in a proportion of 15 g ion exchanger matrix L-1 of colored wastewater, even in the case of the parallel presence of 50 g L-1 of mordant salts in the waste water. The wide range of colored matter removal by the synthesized matrices varied from 40.27 to 98.65 mg g-1 of ionized matrix, obviously depending in each particular chemical structure of the dye upon adsorption.

Mudança dos processos de negócios e adequação da TI nas empresas em decorrência da implantação do sistema público de escrituração digital SPED: um estudo de casos múltiplos

Companies have always been organized by processes, often imperceptible to its employees. With the advancement of technology, organizational processes currently run an organization through computers, and thus generate immediate information that is available to each sector. With the objective of seeking business information in real time, the government created the SPED - Public System of Digital, which involves three subsystems, which are the Electronic Invoice, Digital Accounting Bookkeeping and Digital Tax Bookkeeping. This system is revolutionizing the business structures when gathering, in an innovative way, all information and interlinked business processes. For the implementation of SPED, a revision in the organizational processes is required, since the information is generated and is sent online to the government, without mistakes. Thus the study aimed to analyze the change brought about by the implementation of the Public System of Digital SPED in the main business processes. In order to do so, we have performed a multiple case study involving three companies in the state of Para, two operate in wholesale and one explores agribusiness. The Data collection was performed by accounting professionals, IT and managers. According to the results obtained, it was found that in two companies, the IT infrastructure was capable of deploying the new system without major problems, while one company had more difficulties to cope with the new system. However, all companies had to examine its processes to make the customizations needed to fit. It was also observed that there is no IT Governance in two companies. Therefore, we recommend the use of an appropriate model, not only for the implementation of SPED, but as a way to manage and extract better results from investment in information technology

Crenças normativas e comportamentais e suas influências na intenção de adoção de um sistema de informação: um estudo na área de compras da UFPA

The study aims to identify the factors that influence the behavior intention to adopt an academic Information System (SIE), in an environment of mandatory use, applied in the procurement process at the Federal University of Pará (UFPA). For this, it was used a model of innovation adoption and technology acceptance (TAM), focused in attitudes and intentions regarding the behavior intention. The research was conducted a quantitative survey, through survey in a sample of 96 administrative staff of the researched institution. For data analysis, it was used structural equation modeling (SEM), using the partial least squares method (Partial Least Square PLS-PM). As to results, the constructs attitude and subjective norms were confirmed as strong predictors of behavioral intention in a pre-adoption stage. Despite the use of SIE is required, the perceived voluntariness also predicts the behavior intention. Regarding attitude, classical variables of TAM, like as ease of use and perceived usefulness, appear as the main influence of attitude towards the system. It is hoped that the results of this study may provide subsidies for more efficient management of the process of implementing systems and information technologies, particularly in public universities

Da bancada ao Bureau: análise do desenvolvimento da biotecnologia no Nordeste Brasileiro sob o enfoque de Sistema Regional de Inovação

The starting point of the present work consisted of investigating the development of biotechnology in the Northeast region of Brazil from the perspective of a Regional Innovation System (RIS). The theoretical framework adopted relied on the approaches and concepts presented by the Neo-Schumpeterian perspective. This framework was chosen because, by means of the Innovation System concept, this literature allows us to analyze the relationships and configurations of actors, as well as the role of the state and of social, science and technology, and economic policies in the studied region. The analysis considered four selected dimensions: physical infrastructure, human capital, scientific production, and funding. These variables were chosen because they allow us to verify the possibilities and limitations of developing a biotechnology RIS in the Northeast of Brazil, and these elements would help in answering the question behind this dissertation. The location of the physical infrastructure was determined by means of bibliographic and documental research and interviews with heads of institutions that do biotechnology research. Regarding human capital, the analysis focused on resource training in biotechnology, highlighting graduate courses and research groups in the area. To measure knowledge production, we delimited scientific collaboration among researchers in the field of biotechnology as the focus of this category. For the funding dimension, information was gathered from reports available at the websites of national and state funding agencies. The data was analyzed through method triangulation, involving quantitative and qualitative research stages. To back the analyses, we revisited the integration policies in the area of Science, Technology and Innovation. Our analysis has shown that these policies play a crucial role in the development of biotechnology in the region being studied. The data revealed that the physical infrastructure is concentrated in only three states (Bahia, Ceará, and Pernambuco). In this regard, the Northeast Biotechnology Network (Renorbio) stands out as a strategic actor, enabling states with poor infrastructure to develop research through partnerships with institutions located in another state. We have also verified that the practices involving human resource training and knowledge production are factors that enable the emergence of a regional system for biotechnology in the studied region. As limitations, we have verified the low immersion level of regional actors, the heterogeneity of socioeconomic indicators, the lack of financial resources, and a low innovation culture in the business sector. Overall, we have concluded that the development of a Regional Innovation System in Biotechnology, based on the current regional dynamics, depends on an effective change in the behavior of the social agents involved, both in the national and regional dimensions as well as in the public and private spheres

Operacionalização, no contexto da Força Aérea, de um Sistema Aéreo Autónomo Não-Tripulado Classe II para Vigilância Marítima e Busca e Salvamento

Os sistemas de aeronaves não-tripuladas (UAS-Unmanned Aircraft Systems) são uma realidade nos mais distintos cenários, especialmente nos militares. Atualmente, qualquer força armada credível possui sistemas de armas deste tipo ou planeia adquiri-los a curto prazo. Os militares encontram nesta nova valência do poder aéreo uma forma de ultrapassar alguns desafios colocados, essencialmente, por problemas de restrições económicas, humanas e técnicas. O aumento da mobilidade no transporte marítimo e no transporte aéreo, sobre os oceanos leva a que a zona económica exclusiva possa estar ameaçada, especialmente, a costa portuguesa, justificando-se assim, a existência dos meios necessários à sua vigilância de forma eficiente e eficaz. Para isso o país conta com o apoio Força Aérea Portuguesa, que pretende integrar no seu dispositivo nacional UAS Classe II (peso máximo à descolagem entre os 150kg e os 600kg) e desta forma levar a cabo, juntamente com as outras Unidades Aéreas já existentes, missões de Vigilância Marítima e Busca e Salvamento. Não obstante da capacidade já existente, torna-se relevante que sejam estudadas soluções que possam complementar a missão por ela levada a cabo visando, assim, uma otimização de recursos se possível. Tendo em conta esta moldura enquadradora, a presente dissertação, através de um estudo teórico, tem por objetivo geral analisar a potencial operacionalização de um UAS do tipo Classe II, no contexto das missões da Força Aérea. Para a elaboração deste estudo investigou-se e recolheu-se informações sobre a missão VIMAR e SAR. Para a recolha de dados foram elaboradas entrevistas a alguns militares experientes da organização. Os dados recolhidos possibilitaram a criação e respetiva análise de uma matriz SWOT, assim como tipificar missões, no âmbito da Vigilância Marítima e Busca e Salvamento, nas quais a integração do UAS com as aeronaves tripuladas se revelaria fulcral para o sucesso das operações aéreas. Provado o potencial, termina-se com a enumeração de diversas tarefas, sensores, equipamentos e requisitos que poderão servir de referência aos responsáveis pelo desenho e conceção do UAS.

Estudo da síntese e sinterização de pós compósitos do sistema Ta-Cu

Ta-Cu bulk composites combine high mechanical resistance of the Ta with high electrical and thermal conductivity of the Cu. These are important characteristics to electrical contacts, microwave absorber and heat skinks. However, the low wettability of Ta under Cu liquid and insolubility mutual these elements come hard sintering this composite. High-energy milling (HEM) produces composite powders with high homogeneity and refines the grain size. This work focus to study Ta-20wt%Cu composite powders prepared by mechanical mixture and HEM with two different conditions of milling in a planetary ball mill and then their sintering using hydrogen plasma furnace and a resistive vacuum furnace. After milling, the powders were pressed in a steel dye at a pressure of 200 MPa. The cylindrical samples pressed were sintered by resistive vacuum furnace at 10-4torr with a sintering temperature at 1100ºC / 60 minutes and with heat rate at 10ºC/min and were sintered by plasma furnace with sintering temperatures at 550, 660 and 800ºC without isotherm under hydrogen atmosphere with heat rate at 80ºC/min. The characterizations of the powders produced were analyzed by scanning electron microscopy (SEM), x-ray diffraction (XRD) and laser granulometry. After the sintering the samples were analyzed by SEM, XRD and density and mass loss tests. The results had shown that to high intense milling condition produced composite particles with shorter milling time and amorphization of both phases after 50 hours of milling. The composite particles can produce denser structure than mixed powders, if heated above the Cu melting point. After the Cu to arrive in the melting point, liquid copper leaves the composite particles and fills the pores

Avaliação de heterociclo do tipo mesoiônico solubilizado em sistema microemulsionado para aplicação em dutos

The efficiency of inhibition to corrosion of steel AISI 1018 of surfactant coconut oil saponified (SCO) and heterocyclic type mesoionics (1,3,4-triazólio-2-tiolato) in systems microemulsionados (SCO-ME and SCO-ME-MI) Of type O/A (rich in water emulsion) region with the work of Winsor IV. The systems microemulsionados (SCO-ME and SCO-ME-MI) were evaluated with a corrosion inhibitor for use in saline 10,000 ppm of chloride enriched with carbon dioxide (CO2). The assessment of corrosion inhibitors were evaluated by the techniques of linear polarization resistance (LPR) and loss of weight (MW) in a cell instrumented given the gravity and electrochemical devices. The systems were shooting speed of less than 60 minutes and efficiency of inhibition [SCO-ME (91.25%) and SCO-ME-MI (98.54%)]

Sistema de informação para a realização de testes de imagens em crianças

O Grupo de Investigação de Bioacústica e Sistemas (GIBS) da Escola Superior Tecnologia da Saúde de Coimbra proporciona várias actividades entre as quais o desenvolvimento de softwares aplicados na área da saúde. Neste trabalho vai ser abordado este tema, em particular, o teste “Peabody picture vocabular test”, um dos testes desenvolvidos no GIBS que vai ser associado a um sistema de informação, por forma a automatizar e dinamizar o procedimento do teste. O teste consiste em disponibilizar uma série de imagens a uma criança, que vai seleccionar as que conhece. Esta escolha tem em conta a idade da criança, bem como o seu desenvolvimento cognitivo, por isso este conjunto de imagens é amplo. Das imagens que a criança seleccionar, o protótipo vai gerar um conjunto de quatro imagens aleatórias, e reproduzir o som alusivo a uma delas. Dado que a criança seleccionou as imagens, caso não consiga identificar existe um potencial problema e o técnico encontra-se em condições de poder realizar mais testes para o identificar. No caso de identificar, o teste decorre sem problemas sendo que no final, o técnico terá acesso aos dados verificando quantas acertou em cada uma das intensidades apresentadas. Estas informações podem ser para cada um dos ouvidos em separado, caso se utilizem auscultadores, ou para ambos os ouvidos se o exame for realizado em campo livre. Actualmente o teste é realizado, numa sala acústica auxiliada por um audiométrico, que ajuda a regular a intensidade do som reproduzido e para qual dos ouvidos vai ser reproduzido. Essas mesmas condições serão mantidas. No entanto, o audiómetro funcionará em conjunto com um computador, com uma versão do protótipo a “correr”, substituindo os cartões com as imagens utilizados actualmente. Para além de ser um sistema totalmente automático, conta ainda com a vantagem de armazenar todas as variáveis associadas a cada teste, desde os dados do utente, os dados do técnico (utilizador), os dados do teste e os resultados. A fim de validar este protótipo, foi empreendido um grupo de experiências, abrangendo aspectos particulares e distintos em cada um deles, verificando-se a adequação do modelo e a utilidade do recurso, automatizado, à experiência passada. Os resultados obtidos nesta avaliação permitem considerar que o protótipo cumpre os requisitos pré-estabelecidos.

Desenvolvimento de um sistema de nitretação por plasma em fonte pulsada e sua influencia sobre a nitretação do titânio

The pulsed plasma nitriding is a solution currently used in the metallurgical industry to resolve problems earlier in the processing of parts by using plasma DC voltage. These problems consisted mainly of edge effect and opening arches caused due to non-uniformity of electric fields on uneven surfaces. By varying the pulse width can reduce these effects. However, variations in pulse width can drastically affect the population of the plasma species and hence the final microstructure of the nitrided layer. In literature, little is known about the effect of process parameters on the properties of the plasma species and, consequently, the surface properties. We have developed a system of nitriding with pulsed source with fixed period of 800  pulse width is variable. Examined the variation of these parameters on the properties of nitrided surface when keeping constant temperature, gas composition, flow, pressure and power. It was found that the values of width and pulse repetition time of considerable influence in the intensities of the species present in plasma. Moreover, we observed the existence of the edge effect for some values of pulse widths, as well as changes in surface roughness and hardness

Processo de implantação de um sistema integrado de gestão em uma organização pública à luz da teoria da hospitalidade :um estudo de caso

In the present time, public organizations are employing more and more solutions that uses information technology in order to ofer more transparency and better services for all citizens. Integrated Systems are IT which carry in their kernel features of integration and the use of a unique database. These systems bring several benefits and face some obstacles that make their adoption difficult. The conversion to a integrated system may take years and, thus, the study of the adoption of this IT in public sector organizations become very stimulant due to some peculiarities of this sector and the features of this technology. First of all, information about the particular integrated system in study and about its process of conversion are offered. Then, the researcher designs the configuration of the conversion process aim of this study the agents envolved and the moments and the tools used to support the process in order to elaborate the methodology of the conversion process understood as the set of procedures and tools used during all the conversion process. After this, the researcher points out, together with all the members of the conversion team, the negative and positive factors during the project. Finally, these factors were analysed through the Hospitality Theory lens which, in the researcher opinion, was very useful to understand the elements, events and moments that interfered in the project. The results consolidated empirically the Hospitality Theory presumptions, showing yet a limitation of this theory in the case in study