Uso de composto de poda de árvore e lodo de esgoto como substratos na formação de mudas de sangra d'água (Croton urucurana Baill.) irrigadas com três lâminas de água

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Comparative Studies of Bacillus thuringiensis var. israelensis Metabolism in Different Concentrations of Cassava Flour Processing Waste Based Media

Techniques of production of enthomopatogenic bacteria are developed aiming to increase the productivity and to reduce the costs of the fermentative process. Like this, it has been using agroindustrial wastes or by-products as nutrient sources in culture medium, having been used, in this study, the manipueira, a by-product of the processing of the cassava flour. Fermentations were performed in flasks of Erlenmeyer of 500 mL containing 250 mL of culture media, conditioned in shaker at 180 r.p.m. and 28°C, and the media were composed by manipueira, in concentrations that varied between 400 and 1000 mL/L. The time of the process varied between 48 and 120 hours. They appraised the following parameters: cellular growth, the production of spores, the reduction of organic matter (COD analysis) and the variation of reduction sugar. Although there was a proportional cellular growth to the manipueira concentration, the production of spores was similar in all the cases, at the end of the process, in spite of the smallest speed of production of the same ones in the highest concentrations. In relation to the variation of COD, it has, also, a percentile minor of reduction in the highest concentrations. In the analysis of variation of reduction sugars, the higher concentrations are the ones that they present larger slowness in the reduction of this.

Bioactive compounds of the lipid fractions of agro-industrial waste

This study aimed at evaluating the oils extracted from seeds originating from agro-industrial waste, in order to identify the presence of bioactive compounds. Therefore, determinations of fatty acid profile, triacylglycerols, tocopherol composition, phytosterols, phenolic compounds, total carotenoids, and antioxidant capacity were performed in the oils of grape, guava, melon, passion fruit, pumpkin, soursop, and tomato seeds. Antioxidant capacity analysis was performed by the methods DPPH• , ABTS•+, FRAP, and β-carotene/linoleic acid, besides measure of oxidative stability in the oils. The oils showed to be predominantly unsaturated with high percentage of linoleic essential fatty acid (38.8 to 79.4%), besides presenting significant quantities of tocopherols, phytosterols, and phenolic compounds. Tomato and guava oils showed better results in the antioxidant capacity tests and pumpkin oil had higher induction period in the oxidative stability test (65.3 h). The results obtained in this study collect information that enables the use of new alternative sources of vegetable oils, obtained from agroindustrial waste, which may serve as raw material for food, chemical, and pharmaceutical industries.

Disponibilidade de fósforo em solo tratado com resíduos urbanos e industriais sob sistema de plantio direto cultivado com soja

Pós-graduação em Agronomia (Agricultura) - FCA

Interação composto de lodo de esgoto e cinzas de biomassa no desenvolvimento inicial de eucalipto

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Characterization and thermal study of organic extracts of urban solid waste

The urban residues put in landfill of the city of Sa˜o Carlos-SP, Brazil, in 2004 represent 58.7 % of decomposed organic material. The aim of this research was to characterize samples of urban solid waste and its organic extracts targeting the use of this residue without damaging the environment. The curves were obtained in a nitrogen atmosphere, a heating rate of 20 C min-1 , the temperature of 30–600 C. In the original sample after humidity loss, an event occured concerning the water constitution in the TG curve with an endothermic peak in the DTA curve. There was a presence of inorganic residue in the ashes. The organic matter present in the USR sample disposed in the landfill is constituted by several polarity, organics compounds from the degradation of lignin, cellulose, lipids, and other materials which thermal stabilities are distinct. The hexane extract features in its constitution two fatty acids, stearic and triacontano´ic, which are nonpolar compounds originating from bacteria present in the residue. The acids groups in extract hexane also were evidenced by X-ray diffraction and FTIR.

Ethyl biodiesel: Microwave irradiation aiding ethanolysis of waste cooking oil.

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Phenol oxidation by mushroom waste extracts: a kinetic and thermodynamic study

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização do lodo de esgoto, após desaguamento e secagem térmica, da Estação de Tratamento de Esgoto de Araraquara

Pós-graduação em Química - IQ

Caracterização química e estudo térmico de lodos provenientes da estação de tratamento de esgotos de Ribeirão Preto, SP, Brasil

Pós-graduação em Química - IQ

Utilização de resíduos de tratamento de esgoto como suprimento hídrico e nutricional na cultura do girassol

Pós-graduação em Agronomia (Irrigação e Drenagem) - FCA

Kinetic study of the co-firing of bagasse-sludge blends

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Natural rubber/leather waste composite foam: A new eco-friendly material and recycling approach

This article describes a new approach of recycling the leather waste (shavings) using it as filler in natural rubber foams composites. The foams were prepared using different amounts of leather waste (0-60 parts per hundred of rubber) and submitted to morphological (SEM microscopy) and mechanical analyses (cyclic stress-strain compression). The increase of leather shavings on the composite causes an increase of viscosity in the mixture, which reflects in the foaming process. This results in smaller and fairly uniform cells. Furthermore, expanded rubber has the biggest cell size, with more than 70% of cell with 1000 mu m, while the composite with the higher concentration of leather has around 80% of total number of cells with 100-400 mu m. The mechanical parameters were found to depend on the leather dust concentration. Moreover, the stiffness rises with the increase of leather shavings; consequently, the compression force for expanded rubber was 0.126 MPa as well as the composite with higher concentration of leather was 7.55 MPa. (c) 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 41636.

Growth and reproduction of earthworm in organic waste mixtures and effects on chemical and microbial properties of vermicompost

There is a large demand for organic fertilizers in organic agriculture, but few options for different wastes have been studied. The aim of the present work was to evaluate the biological responses of earthworms Eisenia andrei Bouche in wastes composed of cattle manure, peanut husk and spent coffee grounds, as well as to analyze the effect of earthworms on the microbial density and chemical properties of the vermicompost. Four treatments were employed, H1: cattle manure (100%), H2: cattle manure (75%) + peanut husk (25%), H3: cattle manure (75%) + spent coffee grounds (25%), H4: cattle manure (50%) + spent coffee ground (25%) + peanut husk (25%), with six replicates in a completely randomized design. The addition of spent coffee grounds to the manure increased the total biomass and indicated a rising trend in the production of cocoons, while the peanut husk apparently did not affect these variables. The CFU of bacteria and fungi were affected by the treatments at the beginning and end of the experiment and by the earthworms during the waste transformation. The evaluated organic waste mixtures differently affected the growth and reproduction of earthworms and chemical and biological properties of humus.

Study of ceramic block manufacture with the addition of waste from iron ore extraction

This work is intended to study the possibility of adding an amount of waste from iron mining in the ceramic mass. Clay and coal, from Vale do Paraiba, Sao Paulo, Brazil, were used in this research. These raw materials are used in the ceramic block manufacture. Clay and waste were analyzed by X-ray fluorescence and X-ray diffraction, particle size, differential thermal and thermogravimetric analysis. Liquid limit and plasticity index tests were performed in order to determine the amount of waste that which should be used in the ceramic mass. After determining the amount of waste, all samples were uniaxially pressed and sintered at 900 degrees C. Surface roughness measurements, apparent porosity and bulk density technique and three-point flexural tests were also performed to characterize the samples. The results showed that by adding the exact amount of waste, which was determined by the essays, it is possible to manufacture solid bricks.