Theoretical study on the formation mechanism of Iso-CH2I-Cl

The dissociation and isomerization reaction mechanism on the ground-state potential energy surface for CH2ClI are investigated by ab initio calculations. It is found that the isomer iso-CH2I-Cl can be produced from either the recombination of the photodissociation. fragments or the isomerization reaction of CH2ClI, rather than from isomerization reaction of iso-CH2Cl-I. Further explanations of experimental results are also presented. (C) 2003 Wiley Periodicals, Inc.

Primmorphs from archaeocytes-dominant cell population of the sponge Hymeniacidon perleve: Improved cell proliferation and spiculogenesis

Marine sponges (Porifera) possess an extraordinary diversity of bioactive metabolites for new drug discovery and development. In vitro cultivation of sponge cells in a bioreactor system is very attractive for the sustainable production of sponge-derived bioactive metabolites; however, it is still a challenging task. The recent establishment of sponge primmorphs, multicellular aggregates from dissociated mixed-cell population (MCP), has been widely acknowledged to hold great promise for cultivation in vitro. Here we present a new method to establish an in vitro sponge primmorph culture from archaeocyte-dominant cell population (ADCP) enriched by a Ficoll gradient, rather than a mixed-cell population (MCP). Our rationale is based upon the totipotency (the ability of a cell to differentiate into other cell types) of archaeocyte cells and the different biological functions of various sponge cell types. A sponge, Hymeniacidon perleve collected from the China Yellow Sea was used as a model system for this investigation. Distinct dynamics of primmorph formation were observed while significant increases in DNA synthesis, cell proliferation (up to threefold), and cell growth (up to fourfold) were achieved. Furthermore, a time-dependent spiculogenesis was clearly demonstrated in our longterm culture, indicating high metabolic activity of primmorphs from the ADCP. This new method represents an important step forward to advance sponge cell culture in vitro that may lead to commercial exploitation of sponge-derived drugs. (C) 2003 Wiley Periodicals, Inc.

Preparation of uniform calcium alginate gel beads by membrane emulsification coupled with internal gelation

With the objective of making calcium alginate gel beads with small and uniform size, membrane emulsification coupled with internal gelation was proposed. Spherical gel beads with mean size of about 50 mum, and even smaller ones in water, and with narrow size distribution were successfully obtained. Experimental studies focusing mainly on the effect of process parameters on bead properties were performed. The size of the beads was mainly dependent on the diameter of the membrane pores. High transmembrane pressure made for large gel beads with wide size distribution. Low sodium alginate concentration produced nonspherical beads, whereas a high concentration was unsuitable for the production of small beads with narrow distribution. Thus 1.5% w/v was enough. A high surfactant concentration favored the formation of small beads, but the adverse effect on mass transfer should be considered in this novel process. (C) 2002 Wiley Periodicals, Inc.

A strategy for synthesis of ion-bonded amphiphilic miktoarm star copolymers via supramolecular macro-RAFT agent

Amphiphilic supramolecular miktoarm star copolymers linked by ionic bonds with controlled molecular weight and low polydispersity have been successfully synthesized via reversible addition-fragmentation chain transfer (RAFT) polymerization using an ion-bonded macromolecular RAFT agent (macro-RAFT agent). Firstly, a new tetrafunctional initiator, dimethyl 4,6-bis(bromomethyl)-isophthalate, was synthesized and used as an initiator for atom transfer radical polymerization (ATRP) of styrene to form polystyrene (PSt) containing two ester groups at the middle of polymer chain. Then, the ester groups were converted into tertiary amino groups and the ion-bonded supramolecular macro-RAFT agent was obtained through the interaction between the tertiary amino group and 2-dodecylsulfanylthiocarbonylsulfanyl-2-methyl propionic acid (DMP). Finally, ion-bonded amphiphilic miktoarm star copolymer, (PSt)(2)-poly(N-isopropyl-acrylamide)(2), was prepared by RAFT polymerization of N-isopropylacrylamide (NIPAM) in the presence of the supramolecular macro-RAFT agent. The polymerization kinetics was investigated and the molecular weight and the architecture of the resulting star polymers were characterized by means of H-1-NMR, FTIR, and GPC techniques. (c) 2008 Wiley Periodicals, Inc.

Preparation and characterization of poly(ethyl acrylate)/bentonite nanocomposites by in situ emulsion polymerization

Transparent poly(ethyl acrylate) (PEA)/bentonite nanocomposites containing intercalated-exfoliated combinatory structures of clay were synthesized by in situ emulsion polymerizations in aqueous dispersions containing bentonite. The samples for characterization were prepared through direct-forming films of the resulting emulsions without coagulation and separation. An examination with X-ray diffraction and transmission electron microscopy showed that intercalated and exfoliated structures of clay coexisted in the PEA/bentonite nanocomposites. The measurements of mechanical properties showed that PEA properties were greatly improved, with the tensile strength and modulus increasing from 0.65 and 0.24 to 11.16 and 88.41 MPa, respectively. Dynamic mechanical analysis revealed a very marked improvement of the storage modulus above the glass-transition temperature. In addition, because of the uniform dispersion of silicate layers in the PEA matrix, the barrier properties of the materials were dramatically improved. The permeability coefficient of water vapor decreased from 30.8 x 10(-6) to 8.3 x 10(-6) g cm/cm(2)s cmHg. (C) 2002 Wiley Periodicals, Inc.

Preparation of porous chitosan/agarose microsphere and its R-phycoerythrin release properties

The chitosan microspheres (CS-CL) were prepared by suspension crosslinking method and used as carriers of R-phycoerythrin (R-PE). In this study, R-PE was loaded in the microspheres and released in vitro. The effects of pH value, temperature, ionic strength, and R-PE concentration on loading efficiency and release behavior were discussed. A novel microsphere that contained agarose (CS-AR MP) was prepared and the basic loading and releasing behavior for R-PE of this kind of new micro-spheres were also investigated. The results showed that all these chitosan microspheres have the ability to control-release R-PE. The addition of agarose may somewhat accelerate the release rate of R-PE from microspheres and reduce the capacity of adsorption for R-PE. (c) 2006 Wiley Periodicals, Inc.

Effect of nano-TiO(2)on MP-25 resin

MP-25 resin is a chlorine-containing polymer widely used in coatings. The effects of two types of nano-TiO2 (P-25 and RM301 LP) on MP-25 were studied with saline immersion, UV irradiation, and electrochemical impedance spectroscopy. UV irradiation was evaluated in terms of gloss change and X-ray photoelectron spectroscopy (XPS). The results indicate that, compared to pigment R-930 TiO2, P-25 reduced the immersion resistance and accelerated UV aging of the MP-25 coating, whereas RM301 LP showed the opposite effects. XPS analysis showed that MP-25 resin degraded under UV irradiation via dechlorination and C-C bond breakage, similarly to poly(vinyl chloride), but RM301 LP could inhibit the aging of MP-25 to a certain extent. A skin effect of oxygen and chlorine was identified in MP-25 resin by XPS. RM301 LP could improve the impedance of the MP-25 coating because of its excellent fill capacity. Hence, rutile nano-TiO2 RM301 LP represents an excellent additive for MP-25 resin. (c) 2007 Wiley Periodicals, Inc.

Study of the molecular configuration and the dipole moment in fluorinated liquid crystals

We have investigated the relationship between the molecular configuration and dipole moment of some fluorinated liquid crystals (LCs). The aeornetries of the molecules were preliminarily optimized at empirical AM1 and then were further optimized at B3LYP/6-31G(d) level. The dipole moment has been calculated. It is strongly influenced by the position and number of fluorine substituents in the benzene ring of the molecule. The polarizability, mean polarizabilities, and anisotropic polarizability of the phenylbicyclohexane (PBC) fluorine substituents are also given and discussed. (c) 2004 Wiley Periodicals, Inc.

Maritime policy in Scotland.

This paper begins by defining the meaning of the term `maritime policy'. Since devolution in the UK, the opening of the new Scottish parliament in 1998 and the creation of the Scottish Executive, little effort has been made to establish a distinct maritime policy for Scotland. As was evident prior to devolution, the primary emphasis from any maritime policy perspective has continued to be a focus on lifeline island ferry services. This ignores significant developments in several other key maritime transport sectors, and this paper provides examples of areas that require some form of policy response, including intra-European short sea shipping, UK coastal shipping, urban/river transport and global container shipping. Long-standing institutional bias against maritime transport coupled with subsidy devoted almost entirely to land transport systems has resulted in a quite distorted marketplace. This suggests that a maritime policy is now imperative if maritime transport is to play a more significant role in the overall transport system. Further discussion centres on the need to consider, from a Scottish policy perspective, the role of various state-sponsored maritime service providers and how these bodies might fit better within evolving policy. The conclusion is that formulation of a maritime policy by the Scottish Executive is overdue and that a degree of restructuring of transport responsibilities within the Executive, combined with adequate resource allocation towards the maritime industry, will be necessary in order that market distortions can be overcome, so enabling Scotland to fully exploit the competitive and environmental advantages that maritime transport can provide.

CO2Y the intelligent green solution: minimising carbon emissions by maximising shared travel opportunity.

It is in the interests of everybody that the environment is protected. In view of the recent leaps in environmental awareness it would seem timely and sensible, therefore, for people to pool vehicle resources to minimise the damaging impact of emissions. However, this is often contrary to how complex social systems behave – local decisions made by self-interested individuals often have emergent effects that are in the interests of nobody. For software engineers a major challenge is to help facilitate individual decision-making such that individual preferences can be met, which, when accumulated, minimise adverse effects at the level of the transport system. We introduce this general problem through a concrete example based on vehicle-sharing. Firstly, we outline the kind of complex transportation problem that is directly addressed by our technology (CO2y™ - pronounced “cosy”), and also show how this differs from other more basic software solutions. The CO2y™ architecture is then briefly introduced. We outline the practical advantages of the advanced, intelligent software technology that is designed to satisfy a number of individual preference criteria and thereby find appropriate matches within a population of vehicle-share users. An example scenario of use is put forward, i.e., minimisation of grey-fleets within a medium-sized company. Here we comment on some of the underlying assumptions of the scenario, and how in a detailed real-world situation such assumptions might differ between different companies, and individual users. Finally, we summarise the paper, and conclude by outlining how the problem of pooled transportation is likely to benefit from the further application of emergent, nature-inspired computing technologies. These technologies allow systems-level behaviour to be optimised with explicit representation of individual actors. With these techniques we hope to make real progress in facing the complexity challenges that transportation problems produce.

Novel information sharing syntax for data sharing between police and community partners, using role-based security.

The exchange of information between the police and community partners forms a central aspect of effective community service provision. In the context of policing, a robust and timely communications mechanism is required between police agencies and community partner domains, including: Primary healthcare (such as a Family Physician or a General Practitioner); Secondary healthcare (such as hospitals); Social Services; Education; and Fire and Rescue services. Investigations into high-profile cases such as the Victoria Climbié murder in 2000, the murders of Holly Wells and Jessica Chapman in 2002, and, more recently, the death of baby Peter Connelly through child abuse in 2007, highlight the requirement for a robust information-sharing framework. This paper presents a novel syntax that supports information-sharing requests, within strict data-sharing policy definitions. Such requests may form the basis for any information-sharing agreement that can exist between the police and their community partners. It defines a role-based architecture, with partner domains, with a syntax for the effective and efficient information sharing, using SPoC (Single Point-of-Contact) agents to control in-formation exchange. The application of policy definitions using rules within these SPoCs is inspired by network firewall rules and thus define information exchange permissions. These rules can be imple-mented by software filtering agents that act as information gateways between partner domains. Roles are exposed from each domain to give the rights to exchange information as defined within the policy definition. This work involves collaboration with the Scottish Police, as part of the Scottish Institute for Policing Research (SIPR), and aims to improve the safety of individuals by reducing risks to the community using enhanced information-sharing mechanisms.

Community Councils online: a survey.

A survey of Scottish Community Councils found that only 22% have up-to-date online public presences. Only 4% of Community Councils have easily accessible online planning content. Most Community Councils websites communicate from Community Councils to citizen – only 10% use social media to host online discussion and opinion-gathering. Local Authority-hosted presences guarantee that Community Councils have presence but not that they are up to date. Such presences are also not content-rich. Community Councils’ own volition makes the difference between having no presence at all, mediocre presences and informative, content-rich presences that may serve citizens well. Suggestions to improve matters include broadening the scope of Local Authority-hosted presences and CCs mentoring each other.