4th European Conference on Energy Efficiency and Sustainability in Architecture and Planning : Donostia-San Sebastián, 1-3 Julio 2013

XXXII Cursos de Verano de la UPV/EHU

5th European Conference on Energy Efficiency and Sustainability in Architecture and Planning : Donostia-San Sebastián, 7-9 Julio 2014

XXXIII Cursos de Verano de la UPV/EHU

Generation of double pulses in-line by using reflective Dammann gratings

Doubled femtosecond laser pulses in-line are needed in the collinear pump-probe technique, collinear second harmonic generation frequency-resolved optical gating (SHG FROG) and the spectral phase interferometry for direct electric-field reconstruction (SPIDER), etc. Normally, it is generated by using a Michelson's structure. In this paper, we proposed a novel structure with two-layered reflective Dammann gratings and the reflective mirrors to generate doubled femtosecond laser pulses in line without transmission optical elements. Angular dispersion and spectral spatial walk-off are both compensated. In addition, this structure can also compress the positive chirped pulse, which cannot be realized with a Michelson's structure. By adopting triangular grating and blazed gratings, the efficiency of the system would in principle be increased as the Michelson's scheme. Experiments demonstrated that this method should be an alternative approach for generation of the double compressed pulses of femtosecond laser for practical applications. (c) 2006 Elsevier GmbH. All rights reserved.

A mathematical and experimental investigation of microcycle spectral estimates of semiconductor flicker noise

The experimental portion of this thesis tries to estimate the density of the power spectrum of very low frequency semiconductor noise, from 10^-6.3 cps to 1. cps with a greater accuracy than that achieved in previous similar attempts: it is concluded that the spectrum is 1/f^α with α approximately 1.3 over most of the frequency range, but appearing to have a value of about 1 in the lowest decade. The noise sources are, among others, the first stage circuits of a grounded input silicon epitaxial operational amplifier. This thesis also investigates a peculiar form of stationarity which seems to distinguish flicker noise from other semiconductor noise.

In order to decrease by an order of magnitude the pernicious effects of temperature drifts, semiconductor "aging", and possible mechanical failures associated with prolonged periods of data taking, 10 independent noise sources were time-multiplexed and their spectral estimates were subsequently averaged. If the sources have similar spectra, it is demonstrated that this reduces the necessary data-taking time by a factor of 10 for a given accuracy.

In view of the measured high temperature sensitivity of the noise sources, it was necessary to combine the passive attenuation of a special-material container with active control. The noise sources were placed in a copper-epoxy container of high heat capacity and medium heat conductivity, and that container was immersed in a temperature controlled circulating ethylene-glycol bath.

Other spectra of interest, estimated from data taken concurrently with the semiconductor noise data were the spectra of the bath's controlled temperature, the semiconductor surface temperature, and the power supply voltage amplitude fluctuations. A brief description of the equipment constructed to obtain the aforementioned data is included.

The analytical portion of this work is concerned with the following questions: what is the best final spectral density estimate given 10 statistically independent ones of varying quality and magnitude? How can the Blackman and Tukey algorithm which is used for spectral estimation in this work be improved upon? How can non-equidistant sampling reduce data processing cost? Should one try to remove common trands shared by supposedly statistically independent noise sources and, if so, what are the mathematical difficulties involved? What is a physically plausible mathematical model that can account for flicker noise and what are the mathematical implications on its statistical properties? Finally, the variance of the spectral estimate obtained through the Blackman/Tukey algorithm is analyzed in greater detail; the variance is shown to diverge for α ≥ 1 in an assumed power spectrum of k/|f|^α, unless the assumed spectrum is "truncated".

Paths Towards High Efficiency Silicon Photovoltaics

While photovoltaics hold much promise as a sustainable electricity source, continued cost reduction is necessary to continue the current growth in deployment. A promising path to continuing to reduce total system cost is by increasing device efficiency. This thesis explores several silicon-based photovoltaic technologies with the potential to reach high power conversion efficiencies. Silicon microwire arrays, formed by joining millions of micron diameter wires together, were developed as a low cost, low efficiency solar technology. The feasibility of transitioning this to a high efficiency technology was explored. In order to achieve high efficiency, high quality silicon material must be used. Lifetimes and diffusion lengths in these wires were measured and the action of various surface passivation treatments studied. While long lifetimes were not achieved, strong inversion at the silicon / hydrofluoric acid interface was measured, which is important for understanding a common measurement used in solar materials characterization.

Cryogenic deep reactive ion etching was then explored as a method for fabricating high quality wires and improved lifetimes were measured. As another way to reach high efficiency, growth of silicon-germanium alloy wires was explored as a substrate for a III-V on Si tandem device. Patterned arrays of wires with up to 12% germanium incorporation were grown. This alloy is more closely lattice matched to GaP than silicon and allows for improvements in III-V integration on silicon.

Heterojunctions of silicon are another promising path towards achieving high efficiency devices. The GaP/Si heterointerface and properties of GaP grown on silicon were studied. Additionally, a substrate removal process was developed which allows the formation of high quality free standing GaP films and has wide applications in the field of optics.

Finally, the effect of defects at the interface of the amorphous silicon heterojuction cell was studied. Excellent voltages, and thus efficiencies, are achievable with this system, but the voltage is very sensitive to growth conditions. We directly measured lateral transport lengths at the heterointerface on the order of tens to hundreds of microns, which allows carriers to travel towards any defects that are present and recombine. This measurement adds to the understanding of these types of high efficiency devices and may aid in future device design.

Efficiency, energy and stoichiometry in pelagic food webs; reciprocal roles of food quality and food quantity

In most lakes, zooplankton production is constrained by food quantity, but frequently high C:P poses an additional constraint on zooplankton production by reducing the carbon transfer efficiency from phytoplankton to zooplankton. This review addresses how the flux of matter and energy in pelagic food webs is regulated by food quantity in terms of C and its stoichiometric quality in terms of C:P. Increased levels of light, CO2 and phosphorus could each increase seston mass and, hence, food quantity for zooplankton, but while light and CO2 each cause increased C:P (i.e. reduced food quality for herbivores), increased P may increase seston mass and its stoichiometric quality by reducing C:P. Development of food quality and food quantity in response to C- or P-enrichments will differ between 'batch-type' lakes (dominated by one major, seasonal input of water and nutrients) and 'continuous-culture' types of lakes with a more steady flow-rate of water and nutrients. The reciprocal role of food quantity and stoichiometric quality will depend strongly on facilitation via grazing and recycling by the grazers, and this effect will be most important in systems with low renewal rates. At high food abundance but low quality, there will be a 'quality starvation' in zooplankton. From a management point of view, stoichiometric theory offers a general tool-kit for understanding the integrated role of C and P in food webs and how food quantity and stoichiometric quality (i.e. C:P) regulate energy flow and trophic efficiency from base to top in food webs.From a management point of view, stoichiometric theory offers a general tool-kit for understanding the integrated role of C and P in food webs and how food quantity and stoichiometric quality (i.e. C:P) regulate energy flow and trophic efficiency from base to top in food webs.

Spectral shaping of femtosecond pulses with a prism-waveguide coupler

We report a novel technique for spectral shaping of femtosecond pulses employing a prism-waveguide coupler (PWC). It is demonstrated that the PWC is capable of producing a frequency-dependent loss with greater attenuation at the peak of the spectrum profile of femtosecond pulses than in the wings, which is especially useful for compensation for gain narrowing in most chirped-pulse amplification laser systems.

Nd3+螯合物的含氢有机溶液光谱性能研究

Tris-thenoyltrifluroacetonate of Nd3+ has been prepared and dissolved in DMF solation with very high concentration, and the contained hydrogen has not been substituted by deuterium. The absorption spectrum, emission spectrum, and fluorescence lifetime of the solution were measured. Very obvious characteristic fluorescence peaks were observed at 898 and 1058 nm. Based on Judd-Ofelt theory, three intensity parameters were obtained: Omega(2) = 4.9 x 10(-20) cm(2), Omega(4) = 5.1 x 10(-20) cm(2) and Omega(6) = 2.5 x 10(-20) cm(2). Line strengths S-cal, oscillator strengths f(cal), radiative transition probabilities A(ed), radiative lifetimes tau(r) and branch ratios beta were calculated too. The measured lifetime tau of 1058 nm peak is 460 mu s, and that of 898 nm 505 mu s. Comparison between theoretically computed radiative lifetime tau(r)(682 mu s) and the measured lifetime indicates that the non-radiative transition probability of the solution is very low and the fluorescence quantum efficiency very high. High values of three intensity parameters prove the high asymmetric surroundings of Nd3+, which is important for Nd3+ to absorb the excitation energy. Spectropic quality factor Omega(4)/Omega(6) > 1 makes radiation at 898 nm stronger than at 1058 nm.

Beam smoothing by lens array with spectral dispersion

A scheme of combining technology of lens array (LA) and smoothing by spectral dispersion (SSD) is introduced to improve the irradiation uniformity in laser fusion based on the earlier works on LA. The feasibility of the scheme is also analyzed by numerical simulation. It shows that a focal pattern with flat-top and sharp-edge profile could be obtained, and the irradiation nonuniformity can fall down from 14% with only LA to 3% with both SSD and LA. And this smoothing scheme is depended less on the incidence comparing to other smoothing methods. The preliminary experiment has demonstrated its effectiveness. (c) 2006 Elsevier B.V. All rights reserved.

Design of a highly stable, high-conversion-efficiency pumping source for optical parametric amplifier by extending efficient crystal length

The objective of this study is to improve the stability of pumping source of optical parametric amplifier. Analysis by simulation leads to the conclusion that the stability of the second harmonic can be improved by using properly the intensity of fundamental light and corresponding length of the crystal. By the method of the noncollinear two-pass second harmonic or the tandem second harmonic, the efficient crystal length is extended to a proper value, and the stability of the second harmonic output has been improved two times more than that for the fundamental light, and the conversion-efficiency is about 70% in experiment. When the variation of the fundamental light is about 10%, the variation of the second harmonic intensity has been controlled within 5%. (c) 2006 Elsevier Ltd. All rights reserved.

Smoothing the side lobes of a focused pattern by spectral dispersion in the broadband laser

Starting from the Huygens-Fresnel diffraction integral, the propagation equations of a broadband laser passing through a dispersive lens and a dispersive wedge are derived. Smoothing effect on the side lobes of the focused pattern is achieved as the broadband laser passes through the lens because of the spectral dispersion of the lens. By inserting a dispersive wedge behind the lens, better smoothing effect is realized because a relative position shift between focused patterns of different frequency components is generated due to the spectral dispersion of the wedge. Smoothing effect on the side lobe is obtained even with small bandwidth of the broadband laser as the wedge is used. (c) 2006 Elsevier GmbH. All rights reserved.

Two-dimensional performance of uniform irradiation with the use of an edge-softened lens array and spectral dispersion

A lens array composed of edge-softened elements is used to improve on-target irradiation uniformity in the Shenguang II Laser Facility, with which a Fresnel pattern of suppressed diffraction peaks is obtained. Additional uniformity can be reached by reducing short-wavelength interference speckles inside the pattern when the technique of smoothing by spectral dispersion is also used. Two-dimensional performance of irradiation is simulated and the results indicate that a pattern of steeper edges and a flat top can be achieved with this joint technique. (c) 2007 Optical Society of America.

6th European Conference on Energy Efficiency and Sustainability in Architecture and Planning

[ES]Esta obra recoge las comunicaciones seleccionadas para el 6º Congreso Europeo sobre Eficiencia Energética y Sostenibilidad en Arquitectura, organizado por el grupo de investigación Calidad de Vida en Arquitectura de la Universidad del País Vasco/Euskal Herriko Unibertsitatea. El congreso, que se celebra en el marco de los XXXIV Cursos de Verano de la UPV/EHU, aborda en esta cuarta edición el tema “Ciudades en riesgo: resiliencia y redundancia”. Alrededor de este tema general se desarrollan cinco ponencias magistrales, a cargo de Margaretha Breil (Centro Euro-Mediterráneo para el Cambio Climático), Cristina Garzillo Leemhuis (ICLEI), Ignasi Fontanals (OptiCits), Juan Carlos Barrios Montenegro (Global Action Plan) y Manuel Valdés López (Ajuntament de Barcelona). Además, 24 comunicaciones seleccionadas por el comité científico presentarán trabajos de investigaciones actuales en las sesiones orales y póster. Es objetivo paralelo del congreso es fortalecer las líneas de investigación en eficiencia energética y sostenibilidad de los grupos de investigación y formación de la UPV/ EHU comprometidos con esta propuesta, con objeto de colaborar en el reforzamiento de la I D i en su ámbito de conocimiento y apoyar la apuesta específica de los Gobiernos Central y Vasco, así como de otras instituciones nacionales e internacionales respecto a las actividades de I D i en las materias relacionadas con el cambio climático, la eficiencia energética y la sostenibilidad ambiental [ENG] This work contains the selected abstracts of the 6th European Conference on Energy Efficiency and Sustainability in Architecture and Planning, organized by the research group Quality of life in Architecture of the University of the Basque Country. The conference is part of the XXXIV Summer Courses of the UPV/EHU and deals, in its fourth edition, with the topic “Cities at risk: resilience and redundancy”. Around this general theme there are five invited speakers: Margaretha Breil (Euro-Mediterranean Centre for Climate Change), Cristina Garzillo Leemhuis (ICLEI), Ignasi Fontanals (OptiCits), Juan Carlos Barrios Montenegro (Global Action Plan) y Manuel Valdés López (Barcelona City Council). 24 abstracts additional have been selected by the scientific committee that offer actual research works in presentations and posters. The purpose of the conferences is to strengthen the investigation lines in energy efficiency and sustainability of the research and education groups of the University of the Basque Country (UPV/EHU) involved, with the purpose of collaborating in the reinforcement of the I D i in its field of knowledge, and support the specific projects of the Central and Basque Governments, as well as other national and international institutions related to the I Di activities in similar fields of climate change, energy efficiency and environmental sustainability.