Using simulation to assess the introduction of technology in a continuous operations process

Purpose – To investigate the role of simulation in the introduction of technology in a continuous operations process. Design/methodology/approach – A case-based research method was chosen with the aim to provide an exemplar of practice and test the proposition that the use of simulation can improve the implementation and running of conveyor systems in continuous process facilities. Findings – The research determines the optimum rate of re-introduction of inventory to a conveyor system generated during a breakdown event. Research limitations/implications – More case studies are required demonstrating the operational and strategic benefits that can be gained by using simulation to assess technology in organisations. Practical implications – A practical outcome of the study was the implementation of a policy for the manual re-introduction of inventory on a conveyor line after a breakdown event had occurred. Originality/value – The paper presents a novel example of the use of simulation to estimate the re-introduction rate of inventory after a breakdown event on a conveyor line. The paper highlights how by addressing this operational issue, ahead of implementation, the likelihood of the success of the strategic decision to acquire the technology can be improved.

A methodology for the generation and evaluation of biorefinery process chains, in order to identify the most promising biorefineries for the EU

The topic of bioenergy, biofuels and bioproducts remains at the top of the current political and research agenda. Identification of the optimum processing routes for biomass, in terms of efficiency, cost, environment and socio-economics is vital as concern grows over the remaining fossil fuel resources, climate change and energy security. It is known that the only renewable way of producing conventional hydrocarbon fuels and organic chemicals is from biomass, but the problem remains of identifying the best product mix and the most efficient way of processing biomass to products. The aim is to move Europe towards a biobased economy and it is widely accepted that biorefineries are key to this development. A methodology was required for the generation and evaluation of biorefinery process chains for converting biomass into one or more valuable products that properly considers performance, cost, environment, socio-economics and other factors that influence the commercial viability of a process. In this thesis a methodology to achieve this objective is described. The completed methodology includes process chain generation, process modelling and subsequent analysis and comparison of results in order to evaluate alternative process routes. A modular structure was chosen to allow greater flexibility and allowing the user to generate a large number of different biorefinery configurations The significance of the approach is that the methodology is defined and is thus rigorous and consistent and may be readily re-examined if circumstances change. There was the requirement for consistency in structure and use, particularly for multiple analyses. It was important that analyses could be quickly and easily carried out to consider, for example, different scales, configurations and product portfolios and so that previous outcomes could be readily reconsidered. The result of the completed methodology is the identification of the most promising biorefinery chains from those considered as part of the European Biosynergy Project.

Organizing the innovation process:complementarities in innovation networking

This paper contributes to the developing literature on complementarities in organizational design. We test for the existence of complementarities in the use of external networking between stages of the innovation process in a sample of UK and German manufacturing plants. Our evidence suggests some differences between the UK and Germany in terms of the optimal combination of innovation activities in which to implement external networking. Broadly, there is more evidence of complementarities in the case of Germany, with the exception of the product engineering stage. By contrast, the UK exhibits generally strong evidence of substitutability in external networking in different stages, except between the identification of new products and product design and development stages. These findings suggest that previous studies indicating strong complementarity between internal and external knowledge sources have provided only part of the picture of the strategic dilemmas facing firms.

Organising the innovation process:complementarities in innovation networking

This paper contributes to the developing literature on complementarities in organisational design. We test for the existence of complementarities in the use of external networking between phases of the innovation process in a sample of UK and German manufacturing plants. Our evidence suggests some differences between the UK and Germany in terms of the optimal combination of innovation activities in which to implement external networking. Broadly, there is more evidence of complementarities in the case of Germany, with the exception of the product engineering phase. By contrast, the UK exhibits generally strong evidence of substitutability in external networking in different phases, except between the identification of new products and product design and development phases.

Systemic analysis of concurrent engineering practice

This paper discusses three major areas of knowledge; business process reengineering (BPR), soft systems methodology (SSM) and concurrent engineering (CE) to demonstrate that their philosophies are complementary. An example is given depicting how a manufacturing resource planning system is set up and how improvements can be achieved by applying CE best practice.

Process integration and improvement using systemic diagrams and a human-centred approach

If product cycle time reduction is the mission, and the multifunctional team is the means of achieving the mission, what then is the modus operandi by which this means is to accomplish its mission? This paper asserts that a preferred modus operandi for the multifunctional team is to adopt a process-oriented view of the manufacturing enterprise, and for this it needs the medium of a process map [16] The substance of this paper is a methodology which enables the creation of such maps Specific examples of process models drawn from the product develop ment life cycle are presented and described in order to support the methodology's integrity and value The specific deliverables we have so far obtained are a methodology for process capture and analysis, a collection of process models spanning the product development cycle, and, an engineering handbook which hosts these models and presents a computer-based means of navigating through these processes in order to allow users a better understanding of the nature of the business, their role in it, and why the job that they do benefits the work of the company We assert that this kind of thinking is the essence of concurrent engineering implementation, and further that the systemigram process models uniquely stim ulate and organise such thinking.

An investigation of thin amorphous carbon-based sputtered coatings for MEMS and micro-engineering applications

The work presented in this thesis describes an investigation into the production and properties of thin amorphous C films, with and without Cr doping, as a low wear / friction coating applicable to MEMS and other micro- and nano-engineering applications. Firstly, an assessment was made of the available testing techniques. Secondly, the optimised test methods were applied to a series of sputtered films of thickness 10 - 2000 nm in order to: (i) investigate the effect of thickness on the properties of coatingslcoating process (ii) investigate fundamental tribology at the nano-scale and (iii) provide a starting point for nanotribological coating optimisation at ultra low thickness. The use of XPS was investigated for the determination of Sp3/Sp2 carbon bonding. Under C 1s peak analysis, significant errors were identified and this was attributed to the absence of sufficient instrument resolution to guide the component peak structure (even with a high resolution instrument). A simple peak width analysis and correlation work with C KLL D value confirmed the errors. The use of XPS for Sp3/Sp2 was therefore limited to initial tentative estimations. Nanoindentation was shown to provide consistent hardness and reduced modulus results with depth (to < 7nm) when replicate data was suitably statistically processed. No significant pile-up or cracking of the films was identified under nanoindentation. Nanowear experimentation by multiple nanoscratching provided some useful information, however the conditions of test were very different to those expect for MEMS and micro- / nano-engineering systems. A novel 'sample oscillated nanoindentation' system was developed for testing nanowear under more relevant conditions. The films were produced in an industrial production coating line. In order to maximise the available information and to take account of uncontrolled process variation a statistical design of experiment procedure was used to investigate the effect of four key process control parameters. Cr doping was the most significant control parameter at all thicknesses tested and produced a softening effect and thus increased nanowear. Substrate bias voltage was also a significant parameter and produced hardening and a wear reducing effect at all thicknesses tested. The use of a Cr adhesion layer produced beneficial results at 150 nm thickness, but was ineffective at 50 nm. Argon flow to the coating chamber produced a complex effect. All effects reduced significantly with reducing film thickness. Classic fretting wear was produced at low amplitude under nanowear testing. Reciprocating sliding was produced at higher amplitude which generated three body abrasive wear and this was generally consistent with the Archard model. Specific wear rates were very low (typically 10-16 - 10-18 m3N-1m-1). Wear rates reduced exponentially with reduced film thickness and below (approx.) 20 nm, thickness was identified as the most important control of wear.

The transformational implementation of JSD process specifications via finite automata representation

Conventional structured methods of software engineering are often based on the use of functional decomposition coupled with the Waterfall development process model. This approach is argued to be inadequate for coping with the evolutionary nature of large software systems. Alternative development paradigms, including the operational paradigm and the transformational paradigm, have been proposed to address the inadequacies of this conventional view of software developement, and these are reviewed. JSD is presented as an example of an operational approach to software engineering, and is contrasted with other well documented examples. The thesis shows how aspects of JSD can be characterised with reference to formal language theory and automata theory. In particular, it is noted that Jackson structure diagrams are equivalent to regular expressions and can be thought of as specifying corresponding finite automata. The thesis discusses the automatic transformation of structure diagrams into finite automata using an algorithm adapted from compiler theory, and then extends the technique to deal with areas of JSD which are not strictly formalisable in terms of regular languages. In particular, an elegant and novel method for dealing with so called recognition (or parsing) difficulties is described,. Various applications of the extended technique are described. They include a new method of automatically implementing the dismemberment transformation; an efficient way of implementing inversion in languages lacking a goto-statement; and a new in-the-large implementation strategy.

Strategy making process, its content and context in small professional football clubs

This thesis examines the phenomenon of strategy. Making as practised by small professional football clubs. The study was undertaken because football clubs were perceived to have problems with strategy-making and because it was believed that the specific circumstances of football clubs could be outside the range of views covered by conventional views of strategy-making. The characteristics of the club environment are its uncertainty and unpredictability, simultaneous competition and co--operation, strong regulations, and a not-for-profit orientation. Small clubs in particular face a constant struggle for financial viability and survival, due in part to split business and playing objectives. The study was designed to establish the extent and nature of the difficulties clubs experience with a view to preparing the way for creating practical guidance on ways to overcome them. Clearly, in order to survive in the long term, small professional football clubs require very effective strategic decisions. This study has addressed this issue by inquiring into the nature of strategy making for these organisations with the objective to establish the general direction in which the football clubs in question should be moving. As a result, the main research question to guide this investigation was determined as: Why do small professional football clubs have difficulties making strategies. The investigation was based on an analysis the concept of strategy and its elements, the strategic vision and objectives, the process by which strategic action comes about, the strategic action itself, and the context within which this action occurs. Data has been collected, analysed and interpreted in relation to each of these elements. Together with a wide variety of published material, 20 small football clubs have been sampled and personal interviews were conducted with board members of those clubs. The findings indicate that small football clubs do indeed experience considerable difficulties in making strategies, the reasons for which lie both in the characteristics of their competitive environment and their approaches to strategy-making. The competitive environment is characterised by a cartel-like structure with a high degree of regulation, high levels of uncertainty, little control over the core product or the production process, short-term business cycles and a close geographical link between a club with its local market. The management of clubs is characterised by the need to balance conflicting sporting and business objectives. Formal planning techniques are of little use in the small football club context as decision-making processes have a strong political character and the development of novel strategies is hindered by a strong conservative, industry paradigm and a lack of financial and managerial resources. It is concluded that there is no simple advice to be given to clubs, as they must re-examine the relationship between their playing and business objectives to create a unified and workable approach.

Collaborative alliances and organisational innovation : a study of the innovation process

Despite the voluminous studies written about organisational innovation over the last 30-40 years our understanding of this phenomenon continues to be inconsistent and inconclusive (Wolfe, 1994). An assessment of the theoretical and methodological issues influencing the explanatory utility of many studies has led scholars (e.g. Slappendel, 1996) to re-evaluate the assumptions used to ground studies. Building on these criticisms the current study contributes to the development of an interactive perspective of organisational innovation. This work contributes empirically and theoretically to an improved understanding of the innovation process and the interaction between the realm of action and the mediating effects of pre-existing contingencies i.e. social control, economic exchange and the communicability of knowledge (Scarbrough, 1996). Building on recent advances in institutional theory (see Barley, 1986; 1990; Barley and Tolbert, 1997) and critical theory (Morrow, 1994, Sayer, 1992) the study aims to demonstrate, via longitudinal intensive research, the process through which ideas are translated into reality. This is significant because, despite a growing recognition of the implicit link between the strategic conduct of actors and the institutional realm in organisational analysis, there are few examples that theorise and empirically test these connections. By assessing an under researched example of technology transfer; the government's Teaching Company Scheme (TCS) this project provides a critique of the innovation process that contributes to theory and our appreciation of change in the UK government's premier technology transfer scheme (QR, 1996). Critical moments during the translation of ideas illustrate how elements that are linked to social control, economic exchange and communicability mediate the innovation process. Using analytical categories i.e. contradiction, slippage and dysfunctionality these are assessed in relation to the actions (coping strategies) of programme members over a two-year period. Drawing on Giddens' (1995) notion of the duality of structure this study explores the nature of the relationship between the task environment and institutional environment demonstrating how and why knowledge is both an enabler and barrier to organisational innovation.

Computer interpretation of engineering drawings as solid models

Much of the geometrical data relating to engineering components and assemblies is stored in the form of orthographic views, either on paper or computer files. For various engineering applications, however, it is necessary to describe objects in formal geometric modelling terms. The work reported in this thesis is concerned with the development and implementation of concepts and algorithms for the automatic interpretation of orthographic views as solid models. The various rules and conventions associated with engineering drawings are reviewed and several geometric modelling representations are briefly examined. A review of existing techniques for the automatic, and semi-automatic, interpretation of engineering drawings as solid models is given. A new theoretical approach is then presented and discussed. The author shows how the implementation of such an approach for uniform thickness objects may be extended to more general objects by introducing the concept of `approximation models'. Means by which the quality of the transformations is monitored, are also described. Detailed descriptions of the interpretation algorithms and the software package that were developed for this project are given. The process is then illustrated by a number of practical examples. Finally, the thesis concludes that, using the techniques developed, a substantial percentage of drawings of engineering components could be converted into geometric models with a specific degree of accuracy. This degree is indicative of the suitability of the model for a particular application. Further work on important details is required before a commercially acceptable package is produced.

The application of knowledge based expert systems to mechanical engineering design

Investigation of the different approaches used by Expert Systems researchers to solve problems in the domain of Mechanical Design and Expert Systems was carried out. The techniques used for conventional formal logic programming were compared with those used when applying Expert Systems concepts. A literature survey of design processes was also conducted with a view to adopting a suitable model of the design process. A model, comprising a variation on two established ones, was developed and applied to a problem within what are described as class 3 design tasks. The research explored the application of these concepts to Mechanical Engineering Design problems and their implementation on a microcomputer using an Expert System building tool. It was necessary to explore the use of Expert Systems in this manner so as to bridge the gap between their use as a control structure and for detailed analytical design. The former application is well researched into and this thesis discusses the latter. Some Expert System building tools available to the author at the beginning of his work were evaluated specifically for their suitability for Mechanical Engineering design problems. Microsynics was found to be the most suitable on which to implement a design problem because of its simple but powerful Semantic Net Knowledge Representation structure and the ability to use other types of representation schemes. Two major implementations were carried out. The first involved a design program for a Helical compression spring and the second a gearpair system design. Two concepts were proposed in the thesis for the modelling and implementation of design systems involving many equations. The method proposed enables equation manipulation and analysis using a combination of frames, semantic nets and production rules. The use of semantic nets for purposes other than for psychology and natural language interpretation, is quite new and represents one of the major contributions to knowledge by the author. The development of a purpose built shell program for this type of design problems was recommended as an extension of the research. Microsynics may usefully be used as a platform for this development.

Nitrogen implantation of tool steels and engineering coatings

Ion implantation modifies the surface composition and properties of materials by bombardment with high energy ions. The low temperature of the process ensures the avoidance of distortion and degradation of the surface or bulk mechanical properties of components. In the present work nitrogen ion implantation at 90 keV and doses above 1017 ions/cm2 has been carried out on AISI M2, D2 and 420 steels and engineering coatings such as hard chromium, electroless Ni-P and a brush plated Co-W alloy. Evaluation of wear and frictional properties of these materials was performed with a lubricated Falex wear test at high loads up to 900 N and a dry pin-on-disc apparatus at loads up to 40 N. It was found that nitrogen implantation reduced the wear of AISI 420 stainless steel by a factor of 2.5 under high load lubricated conditions and by a factor of 5.5 in low load dry testing. Lower but significant reductions in wear were achieved for AISI M2 and D2 steels. Wear resistance of coating materials was improved by up to 4 times in lubricated wear of hard Cr coatings implanted at the optimum dose but lower improvements were obtained for the Co-W alloy coating. However, hardened electroless Ni-P coatings showed no enhancement in wear properties. The benefits obtained in wear behaviour for the above materials were generally accompanied by a significant decrease in the running-in friction. Nitrogen implantation hardened the surface of steels and Cr and Co-W coatings. An ultra-microhardness technique showed that the true hardness of implanted layers was greater than the values obtained by conventional micro-hardness methods, which often result in penetration below the implanted depth. Scanning electron microscopy revealed that implantation reduced the ploughing effect during wear and a change in wear mechanism from an abrasive-adhesive type to a mild oxidative mode was evident. Retention of nitrogen after implantation was studied by Nuclear Reaction Analysis and Auger Electron Spectroscopy. It was shown that maximum nitrogen retention occurs in hard Cr coatings and AISI 420 stainless steel, which explains the improvements obtained in wear resistance and hardness. X-ray photoelectron spectroscopy on these materials revealed that nitrogen is almost entirely bound to Cr, forming chromium nitrides. It was concluded that nitrogen implantation at 90 keV and doses above 3x1017 ions/cm2 produced the most significant improvements in mechanical properties in materials containing nitride formers by precipitation strengthening, improving the load bearing capacity of the surface and changing the wear mechanism from adhesive-abrasive to oxidative.