909 resultados para Prawn Shell Waste
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
This work investigated the effects of temperature and of rate of heating on the kinetic parameters of pyrolysis of castor beans presscake, a byproduct generated in the biodiesel production process. Pyrolysis process was investigated by thermogravimetric analysis, and parameters were obtained from nonisothermal experiments. The results obtained from the process of thermal decomposition indicated the elimination of humidity and the decomposition of organic components of the biomass. DTG curves showed that the heating rate affects the temperature of maximum decomposition of the material. Kinetic parameters such as activation energy and pre-exponential factor were obtained by model-free methods proposed by Flynn–Wall–Ozawa (FWO), Kissinger–Akahira–Sunose (KAS), and Kissinger. Experimental results showed that the kinetic parameters values of the FWO and KAS methods display good agreement and can be used to understand the mechanism of degradation of the cake. In a generalized way, the results contribute to better understanding of the processes of biomass pyrolysis.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
The giant river prawn, Macrobrachium cf. rosenbergii, is one of the most cultivated freshwater prawns in the world and has been introduced into more than 40 countries. In some countries, this prawn is considered an invasive species that requires close monitoring. Recent changes in the taxonomy of this species (separation of M. rosenbergii and M. dacqueti) require a re-evaluation of introduced taxa. In this work, molecular analyses were used to determine which of these two species was introduced into Brazil and to establish the geographic origin of the introduced populations that have invaded Amazonian coastal waters. The species introduced into Brazil was M. dacqueti through two introduction events involving prawns originating from Vietnam and either Bangladesh or Thailand. These origins differ from historical reports of the introductions and underline the need to confirm the origin of other exotic populations around the world. The invading populations in Amazonia require monitoring not only because the biodiversity of this region may be affected by the introduction, but also because admixture of different native haplotypes can increase the genetic variability and the likelihood of persistence of the invading species in new habitats.
Resumo:
O camarão de água doce Macrobrachium equidens, nativo da região do Indo-Pacífico, foi registrada pela primeira vez na costa da Amazônia Brasileira. Esta espécie foi encontrada habitando o mesmo ambiente que duas espécies nativas do gênero Macrobrachium: M. amazonicum e M. acanthurus, e é morfologicamente muito similar à última. A identificação dessa espécie foi confirmada pela análise da sequencia genética do gene mitocondrial Citocromo Oxidase (COI). Uma descrição detalhada das características morfológicas e biologia reprodutiva de M. equidens neste novo ambiente que é apresentada.
Resumo:
The appropriate feeding regime for larvae and post-larvae of crustacean decapods is essential for successful larval culture. Reports on the development and morphology of the mouthparts and foregut of these crustaceans have aided in the selection of appropriate larval foodstuffs and consequently increased larval survival and growth rate during development. In the present study, the functional morphology of foregut and mouthparts was investigated in larvae and post-larvae of the freshwater prawn M. amazonicum (Heller, 1862). From observations gathered on both the outer and inner feeding apparati the first stage larvae have obligatory lecithotrophy and feeding behaviour is initiated after molting to the second stage. The foregut of the larvae undergoes diverse morphological changes during larval development and the larval foregut of this species is primarily a mixing organ due to the absence of gastric mills and similar structures. After metamorphosis into post-larvae, drastic morphological changes occur in the foregut and mouthparts to adapt the animals to feed on the greater diversity of foods that are available in their new benthic habitat.
Resumo:
O objetivo deste trabalho foi realizar a caracterização físico-química e microbiológica do surimi obtido de resíduos da filetagem de piramutaba. Os resultados da caracterização físico-química dos resíduos e surimi foram: umidade (76,37 e 79,11%), lipídios totais (5,35 e 0,74%), proteínas (14,92 e 10,79%), cinzas (3,03 e 2,35%), pH (6,9 e 7,4), valor calórico (109,15 e 77,86 kcal.g-1) e atividade de água (ambos 0,98), respectivamente. Os resultados dos valores de bases voláteis totais foi de 7,29 mgN/100-1 g (resíduos) e carboidratos de 7,01% (surimi). Os valores de lipídios totais e proteínas foram reduzidos durante o preparo do surimi, provavelmente, devido a sucessivas lavagens durante o processamento. Os resíduos e o surimi foram analisados microbiologicamente estando em conformidade com os parâmetros exigidos. Os resultados mostraram que houve uma perda da cor vermelha (parâmetro a*) e amarela (parâmetro b*). Por outro lado, o parâmetro L* (luminosidade) aumentou após o processamento do surimi. Conclui-se que os resíduos de piramutaba podem ser empregados como matéria-prima de qualidade na elaboração de surimi e como fonte de nutrientes para a alimentação humana, constituindo-se também como uma alternativa para destino dos resíduos, antes lançados no ambiente.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Ultramarine pigments were successful synthesized from zeolite A obtained from kaolin waste. This waste has been used as an excellent source of silicon and aluminum for zeolite synthesis because of its high kaolinite concentrations and low contents of other accessory minerals. The cost is naturally less than the industrialized product. Color additives (Sulfur and Sodium Carbonate) were mixed with different proportions of zeolite A and further calcined for 5 h at 500 °C. They were characterized by XRD and XRF in addition to visual classification by color and shade. These products show colors from blue to green at different shades, both influenced by the amount of additives and cooling rate after calcination. Thus, a different quantity of the same additives in the same zeolitic matrix provides an increase in the color intensity. Cooling rate after calcination induces the color change which is substantially important in the pigments production.
Synthesis and characterization of zeolite NaP using kaolin waste as a source of silicon and aluminum
Resumo:
The synthesis of zeolite NaP using kaolin waste, from the Amazon region, as a predominant source of silicon and aluminum has been studied. The zeolitisation process occurred in hydrothermal conditions using static autoclaving and the effects of time, temperature, and the Si/Al ratio were investigated. The starting material and the phases formed as reaction products were characterized by XRD, SEM and FTIR. The results showed that pure zeolite NaP is hydrothermally synthesized, at 100 °C for 20 hours, using metakaolin waste material in alkaline medium in presence of additional silica. The XRD and SEM analyses indicate that the synthesized zeolite presents good crystallinity.
Resumo:
In this work, a method was developed for the application of red mud, an alkaline leaching waste, from a bauxite processing plant located in northern Brazil (Amazon region) as starting material for heavy clay products. Samples were prepared by pressing blends of red mud and clay, which were then fired at temperatures from 900 ºC to 1190 ºC. Characterization was carried out by chemical analysis, differential thermal analysis (DTA) and X-ray diffraction (XRD), and the following ceramic properties were evaluated: water absorption, linear shrinkage and flexural strength. In order to evaluate the Na+ stability in the dense ceramic, leaching tests were also carried out on the specimens after sintering process. Results indicated that samples with 50 and 70 wt% of red mud are proper for being used in the production of ceramic bodies, due to its excellent properties, mainly high mechanical resistance and low water absorption, showing thus, an option to minimizing the environmental impacts caused by the aluminum industry.
Resumo:
Between 75% and 90% of the waste produced by health-care providers no risk or is "general" health-care waste, comparable to domestic waste. The remaining 10-25% of health-care waste is regarded as hazardous due to one or more of the following characteristics: it may contain infectious agents, sharps, toxic or hazardous chemicals or it may be radioactive. Infectious health-care waste, particularly sharps, has been responsible for most of the accidents reported in the literature. In this work the preliminary risks analysis (PRA) technique was used to evaluate practices in the handling of infectious health-care waste. Currently the PRA technique is being used to identify and to evaluate the potential for hazard of the activities, products, and services from facilities and industries. The system studied was a health-care establishment which has handling practices for infectious waste. Thirty-six procedures related to segregation, containment, internal collection, and storage operation were analyzed. The severity of the consequences of the failure (risk) that can occur from careless management of infectious health-care waste was classified into four categories: negligible, marginal, critical, and catastrophic. The results obtained in this study showed that events with critics consequences, about 80%, may occur during the implementation of the containment operation, suggesting the need to prioritize this operation. As a result of the methodology applied in this work, a flowchart the risk series was also obtained. In the flowchart the events that can occur as a consequence of a improper handling of infectious health-care waste, which can cause critical risks such as injuries from sharps and contamination (infection) from pathogenic microorganisms, are shown.
Resumo:
Macrobrachium amazonicum é o crustáceo dulcícola mais frequentemente consumido pelas populações ribeirinhas da Amazônia. Entretanto, apesar de sua relativa abundância e vasto conhecimento da espécie a partir de dados de cultivo, pouco se conhece sobre sua biologia no ambiente natural, especialmente quanto à forma de utilização de canais fortemente influenciados pelas marés. Amostras desse camarão foram coletadas em setembro/06 (período seco) e março/07 (período chuvoso), em dois canais perenes da Baía do Guajará, Pará, utilizando armadilhas (matapis) como as utilizadas pelos pescadores locais para identificar a distribuição espacial dos organismos. Os canais de maré são utilizados por camarões de todos os tamanhos nas duas estações do ano, inclusive para a reprodução. A maior abundância de indivíduos da espécie foi encontrada no período seco, nas áreas a montante dos canais. Postula-se que a abundante matéria orgânica alóctone e a busca de locais protegidos podem ser os fatores que explicam a concentração da abundância e da atividade reprodutiva nas áreas a montante dos canais.
Resumo:
No presente estudo foram realizados experimentos sobre alimentação, com a espécie de camarão de água doce Macrobrachium equidens. Foram, testados o tipo de alimento e a densidade de alimento adequada para o desenvolvimento das larvas. Para o experimento sobre o tipo de alimento, 8 tratamentos foram realizados: (I) inanição, (AL) microalgas, (RO) rotíferos, (NA) náuplios de Artemia, (RO + NA) rotíferos + Artemia, (AL + RO) microalgas + rotíferos, (AL + NA) microalgas + Artemia, (AL + RO + NA) microalgas + rotíferos + Artemia. Para o experimento sobre a densidade de alimento, foi utilizado o tipo de alimento que resultou em uma elevada taxa de sobrevivência no experimento anterior. Três tratamentos foram realizados: 4, 8 e 16 náuplios de Artemia/mL. A taxa de alimentação durante o desenvolvimento das larvas foi observada. A sobrevivência, o peso e o percentual de juvenis de cada experimento de alimentação foram determinados. Foi identificado que as larvas de M. equidens são carnívoras, no entanto, houve uma seletividade do tipo de alimento, pois as larvas concluíram o seu ciclo de zoea para a fase de juvenil somente quando os náuplios de Artemia foram disponibilizados. Verificouse também que as larvas se alimentam preferencialmente durante o período diurno, e são oportunistas em relação à densidade do alimento ofertado.
Resumo:
A novel carbon composite was prepared from a mixture of coffee waste and clay with inorganic:organic ratio of 1.3 (CC-1.3). The mixture was pyrolysed at 700 °C. Considering the application of this adsorbent for removal of anionic dyes, the CC-1.3 was treated with a 6 mol L-1 HCl for 24 h to obtain ACC-1.3. Fourier transform infrared (FTIR), N2 adsorption/desorption curves, scanning electron microscope (SEM) and powder X-ray diffractometry (XRD) were used for characterisation of CC-1.3 and ACC-1.3 carbon adsorbents. The adsorbents were effectively utilised for removal of reactive blue 19 (RB-19) and reactive violet 5 (RV-5) textile dyes from aqueous solutions. The maximum amounts of RB-19 dye adsorbed at 25 °C are 63.59 (CC-1.3) and 110.6 mg g-1 (ACC-1.3), and 54.34 (CC-1.3) and 94.32 mg g-1 (ACC-1.3) for RV-5 dye. Four simulated dye-house effluents were used to test the application of the adsorbents for treatment of effluents.