Comparison and analysis of corporate social responsibility (CSR) reports of the top five companies ranked on the 2013 CSR RepTrak

In the 1970s, Corporate Social Responsibility (CSR) was discussed by Nobel laureate Milton Friedman in his article “The Social Responsibility of Business Is to Increase Its Profits.” (Friedman, 1970). His view on CSR was contemptuous as he referred to it as “hypocritical window-dressing” a reflection of the view of Corporate America on CSR back then. For a long time short-term maximization of shareholder value was the only maxim for top management across industries and companies. Over the last decade, CSR has become a more important and relevant factor of a company’s reputation, shifting the discussion from whether CSR is necessary to how best CSR commitments should be done (Smith, 2003). Inevitably, companies do have an environmental, social and economic impact, thereby imposing social costs on current and future generations. In 2013, 50 of the world biggest companies have been responsible for 73 percent of the total carbon dioxide (CO2) emission (Global 500 Climate Change Report 2013). Post et al. (2002) refer to these social costs as a company’s need to retain its “license to operate”. In the late 1990s, CSR reporting was nearly unknown, which drastically changed during the last decade. Allen White, co-founder of the Global Reporting Initiative (GRI), said that CSR reporting”… has evolved from the extraordinary to the exceptional to the expected” (Confino, 2013). In confirmation of this, virtually all of the world’s largest 250 companies report on CSR (93%) and reporting by now appears to be business standard (KPMG, 2013). CSR reports are a medium for transparency which may lead to an improved company reputation (Noked, 2013; Thorne et al, 2008; Wilburn and Wilburn, 2013). In addition, it may be used as part of an ongoing shareholder relations campaign, which may prevent shareholders from submitting Environmental and Social (E&S)1 proposals (Noked, 2013), based on an Ernst & Young report 1 The top five E&S proposal topic areas in 2013 were: 1. Political spending/ lobbying; 2. Environmental sustainability; 3. Corporate diversity/ EEO; 4.Labor/ human rights and 5. Animal testing/ animal welfare. Three groups of environmental sustainability proposal topics of sub-category number two (environmental sustainability) 6 2013, representing the largest category of shareholder proposals submitted. PricewaterhouseCoopers (PwC) even goes as far as to claim that CSR reports are “…becoming critical to a company’s credibility, transparency and endurance.” (PwC, 2013).

Synonymy of the yeast genera Moniliella and Trichosporonoides and proposal of Moniliella fonsecae sp nov and five new species combinations

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Faunistic analysis of Carabidae and Staphylinidae (Coleoptera) in five agroecosystems in northeastern São Paulo state, Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Rupture of the cranial cruciate ligament associated with deformity of the proximal tibia in five dogs

Excessive mechanical stress due to caudal sloping of the tibial plateau may result In early breakdown of the cranial cruciate ligament (CrCL). Five dogs with CrCL rupture associated with caudal sloping of the proximal tibial plateau are described. All were small dogs, of between three and six years of age, with a mean bodyweight of 9.3 kg, which had acute hindlimb lameness. Radiographic examination revealed cranial displacement of the tibia, with a tibial angle varying from 58 to 60 degrees. All cases were treated with a lateral fabellotibial suture and cranial cuneiform osteotomy of the proximal tibia. All dogs were using the operated limb three days after surgery, with normal gait re-established after a mean period of 10 days. Excessive tibial plateau sloping is not a frequent cause of hindlimb lameness In small animals, although it Is Important to consider it as a predisposing factor for rupture of the CrCL.

Virulência de Aphanocladium album (Preuss) Gams e Verticillium lecanii (Zimm.) Viégas (Deuteromycotina: Hyphomycetes) para o Percevejo-de-renda da seringueira, Leptopharsa heveae (Drake & Poor) (Hemiptera: Tingidae)

The lace bug, Leptopharsa heveae is an insect that causes serious damage on rubber trees. In laboratory condition, the strains of Verticillium lecanii (ARSEF 6430, 6431 e 6432) and Aphanocladium album (ARSEF 6433) were tested on third-and fifth-instar nymphs and adults of L. heveae to evaluate their virulence using 2.4 x 10(5) and 2.4 x 10(7) conidia/mL. The bioassays were carried out using Petri dishes whose inner bottoms were covered with damp filter papers. Each Petri dish contained five insects and one rubber tree leaflet. The plates were covered with PVC film to provide high relative humidity, maintained at 26 +/- 0.5 degrees C and a photophase of 14 hours. The Probit analysis was calculated from mortality date of insects killed by fungi. In the highest concentrations, ARSEF 6430 was more virulent for third instar nymphs, and the LT50 was 1.9 days. For the fifth instar, the strains ARSEF 6430, 6433 and 6432 showed similar virulence with LT50 of 2.6, 2.6 and 3.2 days, respectively. For adults, ARSEF 6431 was the most virulent strain with the LT50 recorded at 2.0 days. The smallest concentration did not always cause more than 50% mortality.

Morphological characterisation of five brazilian species of Fidicinoides (Hemiptera: Cicadidae)

The objective of this study was to describe and illustrate the morphological characteristics of some species of Brazilian Fidicinoides to aid in their identification. Descriptions and illustrations are given of the head, thorax, abdomen, right forewing and the last urostemite of the male of the Fidicinoides besti, Fidicinoides brunnea, Fidicinoides duckensis, Fidicinoides pseudethelae and Fidicinoides sucinalae species. The main diagnostic characteristics of these species are markings on pronotum and/or mesonotum and male stemite VIII characteristics.

Técnica de criação e parâmetros biológicos de Stegasta bosquella em amendoim

Studies with Stegasta bosquella in peanut crop are little explored by researchers, mainly by the need of obtaining, in the field, a large quantity of closed leaflets. Therefore, it was sought a way of rearing in a natural diet that facilitates the attainment of the insect. The research was developed at the Laboratorio de Resistencia de Plantas a Insetos (FCAV/Jaboticabal) (T: 25 +/- 2 degrees C, RH 60 +/- 10% and photophase: 12 hours) (Runner IAC 886). The rearing stock of was carried out by collecting caterpillars from the field and keeping them in flat bottom glass tubes until adult emergence and test performance. Caterpillars were individualized in Petri dish plates, lined with moistened filter paper, which contained closed and early opened leaflets, but closed with paper clips (imitating the closed leaflet). A randomized design with two treatments and 36 repetitions was used. After the pupae formation, they were separated into five couples and the adults were kept in transparent plastic cages containing a peanut stem with leaves for oviposition, and fed with a 10% honey solution. The duration and viability of the larval and pupal periods, male and female longevity with and without food, and fertility were evaluated. The two forms of larvae rearing (closed leaflet and leaflet closed with clips) did not influence on any of the studied parameters. Therefore, the rearing of S. bosquella becomes feasible in natural diet, which means there is no need to use the enclosed leaflets for this purpose, and implies the easiness for rearing.

Influência do teor de água na superfície do solo sobre a eficácia e seletividade do flazasulfuron, na cultura de cana-de-açúcar

Objetivou-se avaliar a eficácia e a seletividade do herbicida flazasulfuron aplicado em pré-emergência de Panicum maximum, Brachiaria plantaginea e Digitaria horizontalis e das plantas de cana-de-açúcar, em solos argilosos com diferentes teores de água na superfície, após os primeiros cinco dias da aplicação. Foram testadas as seguintes doses de flazasulfuron isolado: 37,5; 50,0; e 75,0 g ha-1. O herbicida foi misturado, na menor dose (37,5 g ha-1), com ametrine e diuron, ambos a 1.000 g ha¹, e com acetochlor na dose de 1.536 g ha-1. Esses tratamentos foram comparados aos padrões comerciais: isoxaflutole (112,5 g ha-1), tebuthiuron (1.000 g ha-1), sulfentrazone (800 g ha-1) e diuron + hexazinone (1.500 g ha-1). Mantiveram-se as testemunhas capinada e infestada. Todos os herbicidas foram seletivos aos cultivares de cana-de-açúcar testados (RB 845257 e RB 855536). O herbicida flazasulfuron, bem como alguns padrões comerciais, proporcionou ótimos níveis de controle das plantas daninhas onde o solo se encontrava com bons teores de água nesse período. Os resultados foram insatisfatórios - sobretudo para o flazasulfuron isolado ou em misturas com ametrine, acetochlor e diuron - para o controle de P. maximum e B. plantaginea em solo com menor teor de água na superfície. Com a dose de 37,5 g ha-1 do flazasulfuron, o controle de B. plantaginea aos 90 dias após a aplicação, foi de 42,5% em função da redução do teor de água de 22% (CC) a 7,1%, na camada de 0 a 2,5 cm do solo. O controle aumentou para 97,5% quando a variação foi de 25% a 21%.

Determination of crude protein, crude fiber and crude fat in twenty-five genotypes of kale (B-oleracea var. acephala)

The aim of the study was to determine the percentage of crude protein, crude fiber and crude fat (ether extract) of 25 genotypes of kale from the Germplasm Bank of Instituto Agronomico de Campinas and of one genotype grown in the region of Jaboticabal-SP. The plants were cultivated in the field, and the leaves after collection were pre-dried in a convection oven at 65 degrees C for 72 h. Afterward, the leaves were analyzed for crude protein, crude fiber and crude fat (ether-soluble materials). Significant differences were detected among the different genotypes for all the characteristics examined. of the genotypes studied, six showed more than 30% crude protein: HS-20 (32.56%), Comum (31.70%), Couve de Arthur Nogueira 2 (31.16%), Pires 2 de Campinas (30.63%), Manteiga 1-916 (30.36%), and Manteiga de Ribeirao Pires I-2446 (30.03%). In relation to crude fiber, the highest percentage was seen in the genotype Manteiga de Mococa (10.92%), differing significantly from the other genotypes studied. With regard to crude fat, the highest percentage was found in the genotype HS-20 (3.72%), and Pires 1 de Campinas (3.34%). of the genotypes tested, HS-20 stood out among the others, showing both the highest percentage of protein and fat.

Genomics-based design of defined growth media for the plant pathogen Xylella fastidiosa

Based on the genetic analysis of the phytopathogen Xylella fastidiosa genome, five media with defined composition were developed and the growth abilities of this fastidious prokaryote were evaluated in liquid media and on solid plates. All media had a common salt composition and included the same amounts of glucose and vitamins but differed in their amino acid content. XDM1 medium contained amino acids threonine, serine, glycine, alanine, aspartic acid and glutamic acid, for which complete degradation pathways occur in X fastidiosa; XDM2 included serine and methionine, amino acids for which biosynthetic enzymes are absent, plus asparagine and glutamine, which are abundant in the xylem sap; XDM3 had the same composition as XDM2 but with asparagine replaced by aspartic acid due to the presence of complete degradation pathway for aspartic acid; XDM4 was a minimal medium with glutamine as a sole nitrogen source; XDM5 had the same composition as XDM4, plus methionine. The liquid and solidified XDM2 and XDM3 media were the most effective for the growth of X. fastidiosa. This work opens the opportunity for the in silico design of bacterial defined media once their genome is sequenced. (C) 2002 Federation of European Microbiological Societies. Published by Elsevier B.V. B.V. All rights reserved.

Genotype by environment interaction in Nelore cattle from five Brazilian states

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise do desempenho térmico de um sistema de aquecimento solar utilizando coletor com superfície absorvedora em chapas de PVC

It s presented a solar collector to be used in a system for heating bath water, whose main characteristic is its low cost. The collector consists of five plates of PVC with 10 mm thick, 200 mm in width and 1400mm in length, with an area equal to 1.4 square meters. The plates were connected in parallel to the ends of PVC tubes of  40 mm and 32 mm. The plates were coated on one side with aluminum sheets of soft drinks and beers cans open. The system worked on a thermosiphon and was tested in two configurations: the plates uncoated and coated with aluminum material, to determine the influence of material on the efficiency of the collector. For both configurations was used EPS plates below the surface to minimize heat losses from the botton. The thermal reservoir of the heating system is, also, alternative and low cost, since it was constructed from a polyethylene tank for storing water, with volume of 150 end 200 liters. It will be presented the thermal efficiency, heat loss, water temperature of the thermal reservoir at the end of the process and simulation of baths for a house with four residents. The will be demonstrated thermal, economic and material viability of the proposed collector, whose main innovation is the use of recyclables materials, cans of beer and soft drinks, to increase the temperature of the absorber plate.

Análise da indução de fluxo de ar por convecção livre em chaminé solar

Experiments were performed to study the effect of surface properties of a vertical channel heated by a source of thermal radiation to induce air flow through convection. Two channels (solar chimney prototype) were built with glass plates, forming a structure of truncated pyramidal geometry. We considered two surface finishes: transparent and opaque. Each stack was mounted on a base of thermal energy absorber with a central opening for passage of air, and subjected to heating by a radiant source comprises a bank of incandescent bulbs and were performed field tests. Thermocouples were fixed on the bases and on the walls of chimneys and then connected to a data acquisition system in computer. The air flow within the chimney, the speed and temperature were measured using a hot wire anemometer. Five experiments were performed for each stack in which convective flows were recorded with values ranging from 17 m³ / h and 22 m³ / h and air flow velocities ranging from 0.38 m / s and 0.56 m / s for the laboratory tests and air velocities between 0.6 m/s and 1.1m/s and convective airflows between 650 m³/h and 1150 m³/h for the field tests. The test data were compared to those obtained by semi-empirical equations, which are valid for air flow induced into channels and simulated data from 1st Thermodynamics equation. It was found that the chimney with transparent walls induced more intense convective flows than the chimney with matte finish. Based on the results obtained can be proposed for the implementation of prototype to exhaust fumes, mists, gases, vapors, mists and dusts in industrial environments, to help promote ventilation and air renewal in built environments and for drying materials, fruits and seeds

Continuous ethanol production in a nonconventional five-stage system operating with yeast cell recycling at elevated temperatures

Three ranges of increasing temperatures (35-43, 37-45, 39-47degreesC) were sequentially applied to a five-stage system continuously operated with cell recycling so that differences of 2degreesC (between one reactor to the next) and 8degreesC (between the first reactor at the highest temperature and the fifth at the lowest temperature) were kept among the reactors for each temperature range. The entire system was fed through the first reactor. The lowest values of biomass and viability were obtained for reactor R-3 located in the middle of the system. The highest yield of biomass was obtained in the effluent when the system was operated at 35-43degreesC. This nonconventional system was set up to simulate the local fluctuations in temperature and nutrient concentrations that occur in different regions of the medium in an industrial bioreactor for fuel ethanol production mainly in tropical climates. Minimized cell death and continuous sugar utilization were observed at temperatures normally considered too high for Saccharomyces cerevisiae fermentations.

Morphological study of the thorax of the five nymphal instars of Triatoma arthurneivai Lent & Martins (Hemiptera, Reduviidae, Triatominae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)