Genome projects and gene pools: New germplasm for plant breeding?

Crop gene pools have adapted to and sustained the demands of agricultural systems for thousands of years. Yet, very little is known about their content, distribution, architecture, or circuitry. The presumably shallow elite gene pools often continue to yield genetic gains while the exotic pools remain mostly untapped, uncharacterized, and underutilized. The concept and content of a crop’s gene pools are being changed by advancements in plant science and technology. In the first generation of plant genomics, DNA markers have refined some perceptions of genetic variation by providing a glimpse of a primary source, DNA polymorphism. The markers have provided new and more powerful ways of assessing genetic relationships, diversity, and merit by infusing genetic information for the first time in many scenarios or in a more comprehensive manner for others. As a result, crop gene pools may be supplemented through more rapid and directed methods from a greater variety of sources. Previously limited by the barriers of sexual reproduction, the native gene pools will soon be complemented by another gene pool (transgenes) and perhaps by other native exotic gene pools through comparative analyses of plants’ biological repertoire. Plant genomics will be an important force of change for crop improvement. The plant science community and crop gene pools may be united and enriched as never before. Also, the genomes and gene pools, the products of evolution and crop domestication, will be reduced and subjected to the vagaries and potential divisiveness of intellectual property considerations. Let the gains begin.

Importance of anchor genomes for any plant genome project

Progress in agricultural and environmental technologies is hampered by a slower rate of gene discovery in plants than animals. The vast pool of genes in plants, however, will be an important resource for insertion of genes, via biotechnological procedures, into an array of plants, generating unique germ plasms not achievable by conventional breeding. It just became clear that genomes of grasses have evolved in a manner analogous to Lego blocks. Large chromosome segments have been reshuffled and stuffer pieces added between genes. Although some genomes have become very large, the genome with the fewest stuffer pieces, the rice genome, is the Rosetta Stone of all the bigger grass genomes. This means that sequencing the rice genome as anchor genome of the grasses will provide instantaneous access to the same genes in the same relative physical position in other grasses (e.g., corn and wheat), without the need to sequence each of these genomes independently. (i) The sequencing of the entire genome of rice as anchor genome for the grasses will accelerate plant gene discovery in many important crops (e.g., corn, wheat, and rice) by several orders of magnitudes and reduce research and development costs for government and industry at a faster pace. (ii) Costs for sequencing entire genomes have come down significantly. Because of its size, rice is only 12% of the human or the corn genome, and technology improvements by the human genome project are completely transferable, translating in another 50% reduction of the costs. (iii) The physical mapping of the rice genome by a group of Japanese researchers provides a jump start for sequencing the genome and forming an international consortium. Otherwise, other countries would do it alone and own proprietary positions.

Star scientists and institutional transformation: Patterns of invention and innovation in the formation of the biotechnology industry

The most productive (“star”) bioscientists had intellectual human capital of extraordinary scientific and pecuniary value for some 10–15 years after Cohen and Boyer’s 1973 founding discovery for biotechnology [Cohen, S., Chang, A., Boyer, H. & Helling, R. (1973) Proc. Natl. Acad. Sci. USA 70, 3240–3244]. This extraordinary value was due to the union of still scarce knowledge of the new research techniques and genius and vision to apply them in novel, valuable ways. As in other sciences, star bioscientists were very protective of their techniques, ideas, and discoveries in the early years of the revolution, tending to collaborate more within their own institution, which slowed diffusion to other scientists. Close, bench-level working ties between stars and firm scientists were needed to accomplish commercialization of the breakthroughs. Where and when star scientists were actively producing publications is a key predictor of where and when commercial firms began to use biotechnology. The extent of collaboration by a firm’s scientists with stars is a powerful predictor of its success: for an average firm, 5 articles coauthored by an academic star and the firm’s scientists result in about 5 more products in development, 3.5 more products on the market, and 860 more employees. Articles by stars collaborating with or employed by firms have significantly higher rates of citation than other articles by the same or other stars. The U.S. scientific and economic infrastructure has been particularly effective in fostering and commercializing the bioscientific revolution. These results let us see the process by which scientific breakthroughs become economic growth and consider implications for policy.

Use of plant roots for phytoremediation and molecular farming

Alternative agriculture, which expands the uses of plants well beyond food and fiber, is beginning to change plant biology. Two plant-based biotechnologies were recently developed that take advantage of the ability of plant roots to absorb or secrete various substances. They are (i) phytoextraction, the use of plants to remove pollutants from the environment and (ii) rhizosecretion, a subset of molecular farming, designed to produce and secrete valuable natural products and recombinant proteins from roots. Here we discuss recent advances in these technologies and assess their potential in soil remediation, drug discovery, and molecular farming.

Soybean Lipoxygenase-1 Oxidizes 3Z-Nonenal : A Route to 4S-Hydroperoxy-2E-Nonenal and Related Products

In previous work with soybean (Glycine max), it was reported that the initial product of 3Z-nonenal (NON) oxidation is 4-hydroperoxy-2E-nonenal (4-HPNE). 4-HPNE can be converted to 4-hydroxy-2E-nonenal by a hydroperoxide-dependent peroxygenase. In the present work we have attempted to purify the 4-HPNE-producing oxygenase from soybean seed. Chromatography on various supports had shown that O2 uptake with NON substrate consistently coincided with lipoxygenase (LOX)-1 activity. Compared with oxidation of LOX's preferred substrate, linoleic acid, the activity with NON was about 400- to 1000-fold less. Rather than obtaining the expected 4-HPNE, 4-oxo-2E-nonenal was the principal product of NON oxidation, presumably arising from the enzyme-generated alkoxyl radical of 4-HPNE. In further work a precipitous drop in activity was noted upon dilution of LOX-1 concentration; however, activity could be enhanced by spiking the reaction with 13S-hydroperoxy-9Z,11E-octadecadienoic acid. Under these conditions the principal product of NON oxidation shifted to the expected 4-HPNE. 4-HPNE was demonstrated to be 83% of the 4S-hydroperoxy-stereoisomer. Therefore, LOX-1 is also a 3Z-alkenal oxygenase, and it exerts the same stereospecificity of oxidation as it does with polyunsaturated fatty acids. Two other LOX isozymes of soybean seed were also found to oxidize NON to 4-HPNE with an excess of 4S-hydroperoxy-stereoisomer.

Products of Proline Catabolism Can Induce Osmotically Regulated Genes in Rice1

Many plants accumulate high levels of free proline (Pro) in response to osmotic stress. This imino acid is widely believed to function as a protector or stabilizer of enzymes or membrane structures that are sensitive to dehydration or ionically induced damage. The present study provides evidence that the synthesis of Pro may have an additional effect. We found that intermediates in Pro biosynthesis and catabolism such as glutamine and Δ1-pyrroline-5-carboxylic acid (P5C) can increase the expression of several osmotically regulated genes in rice (Oryza sativa L.), including salT and dhn4. One millimolar P5C or its analog, 3,4-dehydroproline, produced a greater effect on gene expression than 1 mm l-Pro or 75 mm NaCl. These chemicals did not induce hsp70, S-adenosylmethionine synthetase, or another osmotically induced gene, Em, to any significant extent. Unlike NaCl, gene induction by P5C did not depend on the normal levels of either de novo protein synthesis or respiration, and did not raise abscisic acid levels significantly. P5C- and 3,4-dehydroproline-treated plants consumed less O2, had reduced NADPH levels, had increased NADH levels, and accumulated many osmolytes associated with osmotically stressed rice. These experiments indicate that osmotically induced increases in the concentrations of one or more intermediates in Pro metabolism could be influencing some of the characteristic responses to osmotic stress.

Effective ribozyme delivery in plant cells.

Hammerhead ribozyme sequences were incorporated into a tyrosine tRNA (tRNA(Tyr)) and compared with nonembedded molecules. To increase the levels of ribozyme and control antisense in vivo, sequences were expressed from an autonomously replicating vector derived from African cassava mosaic geminivirus. In vitro, the nonembedded ribozyme cleaved more target RNA, encoding chloramphenicol acetyltransferase (CAT), than the tRNA(Tyr) ribozyme. In contrast, the tRNA(Tyr) ribozyme was considerably more effective in vivo than either the nonembedded ribozyme or antisense sequences, reducing CAT activity to < 20% of the control level. A target sequence (CM2), mutated to be noncleavable, showed no reduction in CAT activity in the presence of the tRNA(Tyr) ribozyme beyond that for the antisense construct. The reduction in full-length CAT mRNA and the presence of specific cleavage products demonstrated in vivo cleavage of the target mRNA by the tRNA(Tyr) ribozyme. The high titer of tRNA(Tyr) ribozyme was a result of transcription from the RNA polymerase III promoter and led to the high ribozyme/substrate ratio essential for ribozyme efficiency.

A Regulatory Compliance Plan for Decommissioning a Sodium Phosphate Manufacturing Plant

Sodium phosphates are a class of chemicals that have been widely employed in commercial and consumer applications. However, declining use of these chemicals due to environmental concerns has lead to restructuring within the industry that has caused, and is likely to continue to cause, reduction of sodium phosphate production capacity. Closure of a sodium phosphate manufacturing plant necessitates decommissioning and decontamination activities that are subject to a variety of federal, state, and local regulations. A compliance plan was developed to provide a blueprint for ensuring that all federal regulatory requirements are met, however, site dependent state and local requirements were excluded. The compliance plan provides a framework that addresses project team formation and project planning, regulatory requirements, identification of affected processing equipment, plant pre-shutdown activities, waste stream identification and waste management facilities, safety, training, and emergency preparedness planning, and project decommissioning remedial actions. This regulatory compliance plan will enable sodium phosphate plant operators to complete decontamination and decommissioning work in a timely, efficient, compliant, and cost effective manner.

Study of the thermal decomposition of petrochemical sludge in a pilot plant reactor

The pyrolysis of a sludge produced in the waste water treatment plant of an oil refinery was studied in a pilot plant reactor provided with a system for condensation of semivolatile matter. The study comprises experiments at 350, 400, 470 and 530 °C in nitrogen atmosphere. Analysis of all the products obtained (gases, liquids and chars) are presented, with a thermogravimetric study of the char produced and analysis of main components of the liquid. In the temperature range studied, the composition of the gas fraction does not appreciably vary. In the liquids, the light hidrocarbon yield increases with increasing temperature, whereas the aromatic compounds diminish. The decomposition of the solid fraction has been analysed, finding a material that reacts rapidly with oxygen regardless of the conditions it is formed.

SILVER NANOPARTICLES AND THE PLANT-ASSOCIATING ABILITIES OF RHIZOBIACEAE BACTERIA

The use of nanoparticle technology in consumer products has been increasing due to their broad-spectrum antimicrobial properties. Specifically, silver nanoparticles (AgNPs) can demonstrate distinct physiochemical properties compared to bulk silver, including a large surface area to volume ratio that allows for higher reactivity with bacterial cell surfaces. AgNPs are being released into the environment, including soil ecosystems through various pathways such as points of production or during disposal of silver-containing products. This raises the concern about the potential impact on beneficial soil bacteria and their surrounding ecosystems. Members of the Rhizobiaceae family play important roles in nutrient cycling and contribute to overall soil fertility and the experiments in this thesis address the potential for AgNP-mediated toxicity on these plant-associating bacteria. Respiration analysis of Bradyrhizobium japonicum, Azospirillum brasilense, and Agrobacterium tumefaciens has revealed that AgNPs can negatively impact the growth and survival of these bacterial species, with B. japonicum being the most susceptible. Additionally, swimming motility assays using B. japonicum showed a significant decrease in colony diameter when treated with AgNPs (50 ppm). A significant decrease in root colonization of Triticum aestivum roots by A. brasilense was observed as AgNP treatment concentrations increased. Although some of the experiments could not be completed, taken together, these experiments and the research reported herein highlights the potential toxicological effects of AgNPs on bacterial species vital to the growth and health of agriculturally important crops.

Fuzzy control of a water pump for an agricultural plant growth system

At the present time there is a high pressure toward the improvement of all the production processes. Those improvements can be sensed in several directions in particular those that involve energy efficiency. The definition of tight energy efficiency improvement policies is transversal to several operational areas ranging from industry to public services. As can be expected, agricultural processes are not immune to this tendency. This statement takes more severe contours when dealing with indoor productions where it is required to artificially control the climate inside the building or a partial growing zone. Regarding the latter, this paper presents an innovative system that improves energy efficiency of a trees growing platform. This new system requires the control of both a water pump and a gas heating system based on information provided by an array of sensors. In order to do this, a multi-input, multi-output regulator was implemented by means of a Fuzzy logic control strategy. Presented results show that it is possible to simultaneously keep track of the desired growing temperature set-point while maintaining actuators stress within an acceptable range.

The steel industry in the European Union: Composition and drivers of energy prices and costs. CEPS Special Report No. 80, 17 December 2013

This report assesses the energy costs borne by the steel industry in the EU between 2010 and 2012, and compares the energy costs, including both the energy components and other regulatory costs, to production costs, turnover and margins of steel-makers. The estimates of energy costs are based on primary sources, i.e. is on information provided by steel-makers through a written questionnaire. This information was validated by the research team by checking annual energy bills, when available, and other public sources. In this respect, this exercise represents a unique fact-based investigation into the costs of energy for steel-makers in Europe, whereas most of the information currently available in the public domain is based on secondary or statistical information. In 2012, the median EU steel plant pays about €33/MWh for gas, up from €26/MWh in 2010. As for electricity, in 2012 the EU median plant pays €62/MWh, up from €59/MWh in 2010. The report also includes a comparison with the prices of energy carriers paid by producers based in the US.

Controlled ‘Europeanisation’? The KMW–Nexter merger and the Germany’s new strategy for the arms industry. OSW COMMENTARY NUMBER 180/26.08.2015

On 29 July a deal was signed in Paris concerning a merger between Krauss-Maffei Wegmann (KMW), Germany’s largest manufacturer of tanks, infantry fighting vehicles and artillery systems, and its French counterpart Nexter. The new holding formed as a result of the merger will be Europe’s largest producer of arms systems for land forces, comparable to the Airbus Group in the aerospace industry. While work on finalising the merger was underway, the German government was developing a new strategy for Germany’s arms industry, which was published on 9 June 2015. The strategy’s provisions show that German politicians, despite holding negative opinions on previous mergers between German arms companies and foreign businesses, have concluded that consolidation at the European level is nonetheless the only way to go. However, the strategy also states that the German government should exercise more influence than previously on the terms and conditions of any such consolidation. To this end, it identified key national technologies which will be supported and protected through various instruments, including also the conclusion of intergovernmental agreements on strategic defence co-operation. Such agreements may regulate questions such as the ownership structures of the new companies, the locations for developing technologies and for manufacturing products, subcontractors and exports of jointly developed arms and military equipment. In relation to the KMW–Nexter merger, such a deal between France and Germany is expected to be signed this autumn.

Organic d13C values, kerogen atomic C/N ratios and relative weights of some kerogen pyrolysis products of ODP Hole 112-682A (Table 1)

Carbon isotopic composition of predominantly marine kerogen in latest Oligocene mudstones of the Peru Margin ODP 682A Hole shows an about 3.5? increase with decreasing age. Py-GC and elemental (C=N ratio) analysis of the kerogen plus sulphur isotopic study together with earlier knowledge on geological setting and organic geochemistry results in a better understanding of depositionary environment and allows to separation of the influence of concentration of water dissolved carbon dioxide (ce) on kerogen delta13C from that of other factors (bacterial degradation, sea surface temperature, DIC delta13C, productivity, and admixture of land plant OM). Based on this analysis, the major part of the kerogen shift is considered as a result of the latest Oligocene decrease of marine photosynthetic carbon isotopic fractionation in the Peru Margin photic zone, which in turn possibly reflects a simultaneous drop in atmospheric CO2 level. Uncertainties in the evaluation of the factors affecting the marine photosynthetic carbon isotopic fractionation and the extent of ocean-atmosphere disequilibrium do not permit calculation of the decrease of the atmospheric CO2.

Evaluation of operation and maintenance factors limiting municipal wastewater treatment plant performance /

Mode of access: Internet.