Experts' consensus on use of electronic cigarettes: a Delphi survey from Switzerland.

OBJECTIVES: In some countries, nicotine-containing electronic cigarettes (e-cigarettes) are considered a consumer product without specific regulations. In others (eg, Switzerland), the sale of e-cigarettes containing nicotine is forbidden, despite the eagerness of many smokers to obtain them. As scientific data about efficacy and long-term safety of these products are scarce, tobacco control experts are divided on how to regulate them. In order to gain consensus among experts to provide recommendations to health authorities, we performed a national consensus study. SETTING: We used a Delphi method with electronic questionnaires to bring together the opinion of Swiss experts on e-cigarettes. PARTICIPANTS: 40 Swiss experts from across the country. OUTCOME MEASURES: We measured the degree of consensus between experts on recommendations regarding regulation, sale, use of and general opinion about e-cigarettes containing nicotine. New recommendations and statements were added following the experts' answers and comments. RESULTS: There was consensus that e-cigarettes containing nicotine should be made available, but only under specific conditions. Sale should be restricted to adults, using quality standards, a maximum level of nicotine and with an accompanying list of authorised ingredients. Advertisement should be restricted and use in public places should be forbidden. CONCLUSIONS: These recommendations encompass three principles: (1) the reality principle, as the product is already on the market; (2) the prevention principle, as e-cigarettes provide an alternative to tobacco for actual smokers, and (3) the precautionary principle, to protect minors and non-smokers, since long-term effects are not yet known. Swiss authorities should design specific regulations to sell nicotine-containing e-cigarettes.

Polttoaineen reaktiivisuuden määrittäminen kiertoleijupoltossa

Kehitettäessä leijupolttotekniikkaa entistä ympäristöystävällisemmäksi ja tehokkaammaksi tarvitaan lisää tietoa polttoaineen käyttäytymisestä tulipesässä. Polttoaineen palamisprofiili ja reaktiivisuus vaikuttavat oleellisesti esimerkiksi voimalaitoskattilan lämmönsiirtopintojen sijoitteluun ja suunnitteluun sekä ohjausjärjestelmän toteutukseen. Varsinkin monipolttoainekattiloilla ohjausjärjestelmän toimivuus joutuu koetukselle esimerkiksi kuormanmuutostilanteissa ja äkillisissä polttoaineen syöttöhäiriöissä. Tässä työssä on aluksi tutustuttu kiertoleijupolton ilmiöihin ja niiden matemaattiseen mallintamiseen. Lisäksi esitetään katsaus eri prosessiolosuhteiden vaikutuksesta palamiseen kiertoleijuolosuhteissa. Työn tutkimusosassa kehitettiin menetelmä polttoaineen reaktiivisuuden määrittämiseksi kiertoleijupoltossa. Kehitetty menetelmä koostuu koesarjasta ja matemaattisesta simulointimallista. Koetoiminta suoritettiin VTT Energian laboratoriokokoluokan kiertoleijukoelaitteella. Koesarja polttoaineen reaktiivisuuden määrittämiseksi sisältää eri kaasukomponenttien profiilimittauksia ja dynaamisia muutoskokeita. Menetelmän avulla voidaan tutkia eri polttoaineiden reaktiivisuuksia sekä polttoaineen reaktiivisuuden ja tietyn prosessiolosuhteen välistä riippuvuutta. Suorittamalla koeajomatriisin mukaiset kokeet tietyissä prosessiolosuhteissa voidaan polttoaineen reaktiivisuus selvittää koetulosten ja simulointimallin perusteella.

DTC-OHJATUN TAHTIKONEKÄYTÖN PYÖRIMISNOPEUSSÄÄDÖN ANALYYSI INTEGROIDUN SIMULOINTIMALLIN AVULLA

Työssä rakennettiin integroitu simulointimalli sähkökäytölle, jonka mekaniikka koostuu joustava-akselisesta kaksimassa systeemistä. Lisäksi tarkasteltiin kyseiselle sähkökäytölle ominaisia piirteitä ja niiden aiheuttamia ongelmia eri sovelluksissa, sekä tutkittiin teollisuudessa yleisesti esiintyvän pyörimisnopeussäädön, PI-säädön, parametrien vaikutusta kyseisen mekaniikan omaaviin sähkökäyttöihin. Taajuusmuuttajalle kehiteltiin yksinkertaistettu simulointimalli, jolla pystytään pienentämään merkittävästi simuloinnin laskenta-aikaa. Vääntövärähtelyiden kompensointiin tutkittiin optimaalista tilasäätöä, jossa Kalman suotimella estimoidaan systeemin tilojen lisäksi myös kuormamomentti ja jossa nopeussäätö suunnitellaan lineaarisella neliöllisellä menetelmällä (Linear Quadratic).

The political ecology of weeds : a scalar approach to landscape transformations

How do plants that move and spread across landscapes become branded as weeds and thereby objects of contention and control? We outline a political ecology approach that builds on a Lefebvrian understanding of the production of space, identifying three scalar moments that make plants into 'weeds' in different spatial contexts and landscapes. The three moments are: the operational scale, which relates to empirical phenomena in nature and society; the observational scale, which defines formal concepts of these phenomena and their implicit or explicit 'biopower' across institutional and spatial categories; and the interpretive scale, which is communicated through stories and actions expressing human feelings or concerns regarding the phenomena and processes of socio-spatial change. Together, these three scalar moments interact to produce a political ecology of landscape transformation, where biophysical and socio-cultural processes of daily life encounter formal categories and modes of control as well as emotive and normative expectations in shaping landscapes. Using three exemplar 'weeds' - acacia, lantana and ambrosia - our political ecology approach to landscape transformations shows that weeds do not act alone and that invasives are not inherently bad organisms. Humans and weeds go together; plants take advantage of spaces and opportunities that we create. Human desires for preserving certain social values in landscapes in contradiction to actual transformations is often at the heart of definitions of and conflicts over weeds or invasives.

Comparing multiple criteria for species identification in two recently diverged seabirds

Correct species identification is a crucial issue in systematics with key implications for prioritising conservation effort. However, it can be particularly challenging in recently diverged species due to their strong similarity and relatedness. In such cases, species identification requires multiple and integrative approaches. In this study we used multiple criteria, namely plumage colouration, biometric measurements, geometric morphometrics, stable isotopes analysis (SIA) and genetics (mtDNA), to identify the species of 107 bycatch birds from two closely related seabird species, the Balearic (Puffinus mauretanicus) and Yelkouan (P. yelkouan) shearwaters. Biometric measurements, stable isotopes and genetic data produced two stable clusters of bycatch birds matching the two study species, as indicated by reference birds of known origin. Geometric morphometrics was excluded as a species identification criterion since the two clusters were not stable. The combination of plumage colouration, linear biometrics, stable isotope and genetic criteria was crucial to infer the species of 103 of the bycatch specimens. In the present study, particularly SIA emerged as a powerful criterion for species identification, but temporal stability of the isotopic values is critical for this purpose. Indeed, we found some variability in stable isotope values over the years within each species, but species differences explained most of the variance in the isotopic data. Yet this result pinpoints the importance of examining sources of variability in the isotopic data in a case-by-case basis prior to the cross-application of the SIA approach to other species. Our findings illustrate how the integration of several methodological approaches can help to correctly identify individuals from recently diverged species, as each criterion measures different biological phenomena and species divergence is not expressed simultaneously in all biological traits.

Vertailuanalyysin käyttö termohydraulisten koelaitteistojen tulosten laitosmittakaavaan skaalautumisen tutkimisessa

Työn tavoitteena oli tarkastella termohydraulisten koelaitteistojen skaalauksessa käytettäviä periaatteita ja menettelyjä sekä vertailla Apros-simulaattoriohjelmalla laskettuja kanden koelaitteistomallin ja EPR-mallin tuloksia. Tarkoituksena oli saada käsitys siitä, miten hyvin tarkastellut koelaitteistot kuvaavat EPR-Iaitostyypin käyttäytymistä onnettomuustilanteessa. Malleilla tutkittiin jäähdytteen määrän vaikutusta primääripiirin käyttäytymiseen. Koelaitteistomallien tuloksissa toistuvat samat ilmiöt kuin EPR-mallin tuloksissa. Laskettuja PKL-koelaitteistomallin tuloksia vertailtiin myös koelaitteistolla suoritettuun kokeeseen. PKL-mallin todettiin toistavan hyvin kokeen tulokset. Koelaitteistojen tuloksien perusteella kelpoistetaan laskentaohjelmia, joita käytetään ydinvoimalaitosten turvallisuustutkimuksessa. Erityistä harkintaa tulee käyttää koelaitteistojen tulosten hyödyntämisessä, sillä mittakaava vaikuttaa ilmiöiden esiintymiseen.

Aportación al estudio de arcillas expansivas asociadas a las facies garumnienses de la Conca de Tremp (Prepirineo de Lleida)

Some clay levels of the garumnian facies, which surface in the southern sector of the Tremp Basin present a principal mineralogy of expansive type. The oedometer essays show that such materials present a very high grade of potencial expansivity. The swelling pressure presents values higher than 390 KN/m2. In the majority of the areas wherw this kind of clays surface the hydric erosion phenomena and the mass movements often appear to be very common and intense. The geomorphological role of the expansive clays is discussed as the triggering factor, associated to the development of these denudative processes

The Role of Surfactant Properties of Extractants in Hydrometallurgical LiquidLiquid Extraction Processes

The amphiphilic nature of metal extractants causes the formation of micelles and other microscopic aggregates when in contact with water and an organic diluent. These phenomena and their effects on metal extraction were studied using carboxylic acid (Versatic 10) and organophosphorus acid (Cyanex 272) based extractants. Special emphasis was laid on the study of phase behaviour in a pre neutralisation stage when the extractant is transformed to a sodium or ammonium salt form. The pre neutralised extractants were used to extract nickel and to separate cobalt and nickel. Phase diagrams corresponding to the pre neutralisation stage in a metal extraction process were determined. The maximal solubilisation of the components in the system water(NH3)/extractant/isooctane takes place when the molar ratio between the ammonia salt form and the free form of the extractant is 0.5 for the carboxylic acid and 1 for the organophosphorus acid extractant. These values correspond to the complex stoichiometry of NH4A•HA and NIi4A, respectively. When such a solution is contacted with water a microemulsion is formed. If the aqueous phase contains also metal ions (e.g. Ni²+), complexation will take place on the microscopic interface of the micellar aggregates. Experimental evidence showing that the initial stage of nickel extraction with pre neutralised Versatic 10 is a fast pseudohomogeneous reaction was obtained. About 90% of the metal were extracted in the first 15 s after the initial contact. For nickel extraction with pre neutralised Versatic 10 it was found that the highest metal loading and the lowest residual ammonia and water contents in the organic phase are achieved when the feeds are balanced so that the stoichiometry is 2NH4+(org) = Nit2+(aq). In the case of Co/Ni separation using pre neutralised Cyanex 272 the highest separation is achieved when the Co/extractant molar ratio in the feeds is 1 : 4 and at the same time the optimal degree of neutralisation of the Cyanex 272 is about 50%. The adsorption of the extractants on solid surfaces may cause accumulation of solid fine particles at the interface between the aqueous and organic phases in metal extraction processes. Copper extraction processes are known to suffer of this problem. Experiments were carried out using model silica and mica particles. It was found that high copper loading, aromacity of the diluent, modification agents and the presence of aqueous phase decrease the adsorption of the hydroxyoxime on silica surfaces.

Aaltovoimalaitteen toimintaperiaatteen analysointi

Diplomityö tehtiin Wello Oy:n toimeksiannosta. Wello Oy on vesi- ja tuulivoimaratkaisuihin keskittynyt yritys, joka kehittää aaltovoimalaitekonseptia. Työssä selvitettiin aaltovoimaan liittyviä ilmiöitä ja aaltovoimalaitteen mekaanista konseptia ja tehtiin arvio niiden tehokkuudesta. Työssä käytettiin kaupallisia simulointityökaluja kuten monikappaledynamiikan simulointiohjelmaa MSC.ADAMS R3:a ja yleistä matematiikka ohjelmaa Matlab Simulink:ia. Simulointimallia käytettiin arvioimaan laitteen yleistä käyttäytymistä. Lisäksi laitteen analyyttisiä malleja käytettiin laitteen toimintaperiaatteen selvitykseen. Simulointia käytettiin kelluvan laitteen mekanismin tutkimukseen. Tuloksiin pohjautuen laitteelle määriteltiin teoreettiset maksimiteho rajat ja rajoitteet, jotka vaikuttavat laitteen tehokkuuteen.

O experimento de Clement-Desormes no século XXI

The Clement-Desormes experiment is reviewed. By reason of a finite difference between the pressure within the system and its surroundings, Bertrand and McDonald have criticized the usual consideration of the adiabatic expansion as reversible. Garland, Nibler and Shoemaker oppose, defining regions through virtual boundaries where the surroundings do not operate. For Holden, the use of virtual boundaries is expendable. Experiments cannot support a hypothesis testing due to experiment's intrinsic uncertainty. The role of polytropy in uncertainty is discussed. Both thermodynamic definitions and kinetic model depict the real processes as irreversible phenomena and the reversible ones as a limiting hypothetical case.

A formação inicial em química baseada em conceitos representados por meio de modelos mentais

The current legislation determines that the chemist must have a solid comprehension about chemical concepts. Literature presents the concept of mental model, which is determinant to the learning of phenomena and concepts. This paper presents some mental models that students of the Chemistry course at UFSCar have about chemical concepts. A lot of incoherence was observed in student's mental models, which is an evidence that there are problems in the learning of chemistry education.

Luz: um raro produto de reação

The production of visible light by chemical reactions constitutes interesting and fascinating phenomena and several reaction mechanisms are discussed to rationalize excited state formation. Most efficient chemiluminescence reactions are thought to involve one or more electron transfer steps and chemiexcitation is believed to occur by radical annihilation. A brief introduction to the general principles of light production and the main known chemiexcitation mechanisms will be given here. Subsequently, recent results on the mechanistic elucidation of efficient chemiluminescence systems, as the peroxyoxalate reaction, the induced decomposition of phenoxy-substituted 1,2-dioxetanes and the catalyzed decomposition of new a-peroxylactones will be discussed.

Electrocatalysis in wastewater treatment: recent mechanism advances

Over 50 years, several scientists and industries have developed new alternatives for wastewater treatment and remediation. Recently, electrochemical technology has been largely developed mainly because of its versatility and environmental compatibility. Scientific contributions about role of the electrode material have allowed determining that the influence of material in the selectivity is an important parameter. However, to interpret this behavior, comprehensive physical chemistry models for organics destruction, related to electrochemical phenomena and material surfaces, were proposed in the last decades. So, this paper presents a critical and comprehensive review about the principles and recent mechanism advances in electrocatalysis for wastewater treatment.

Selective detection of fluoride based on a pyridinium n-phenolate-calix[4]pyrrole displacement assay: an undergraduate laboratory experiment

A two-step experiment is proposed for a third year class in experimental organic chemistry. Over a period of five weeks, the students synthesized calix[4]pyrrole, a receptor that is highly selective for fluoride, and a pyridinium N-phenolate dye. Subsequently, the students used the synthesized compounds to investigate a displacement assay on the basis of the competition in acetonitrile between fluoride and the dye for calix[4]pyrrole. The experiment increased the students' skills in organic synthesis and in the characterization of organic compounds, provided a very attractive and accessible illustration of important supramolecular phenomena, and allowed the study of a chromogenic chemosensor.

Luottamuksen ilmeneminen alueellisissa yhteistyöverkostoissa

Appearance of trust in regional, co-operative networks In our times, the value of social networks has been widely acknowledged. One can say that it is important for private persons to get networked, whilst it is even a must for companies and organizations in business life. This doctor's thesis examines three co-operative regional networks. Networks are located in Western Uusimaa (Länsi-Uusimaa) region in southernmost Finland, and they had both public organizations and private companies as participants (later called ‘players’). Initially, all of them were co-financed from public funds, and two of them are still operational while writing this. The main target of these networks has been to act as learning networks. The learning network stands for an ensemble of research and development units and workplaces constituting a common forum for learning. The main focus in this study has been on qualitative and structural characteristics of the networks, and how they are relating with intrinsic trust. In addition to the development of trust, it has been studied, at what level organizational learning within the networks takes place, and lastly, what kind of factors facilitate the development of social capital. The theoretical framework for the study is built on analysing trust and social capital. It is a 'mission impossible' to find single definitions for such major concepts. In this study, from the research questions' point of view it has been more relevant to concentrate on the aspects of networking and the relationships between the participating organizations. The total view in this study is very network-centric, and therefore those theories which have similar point of view have been prioritized. Such is the theory about structural holes by Ronald S. Burt (1992). It has been widely applied; especially his views on constraints affecting players in networks. The purpose of this study has not been to create new theories or to analyse and compare thoroughly the existing theoretical trends. Instead, the existing theories have provided the study with conceptual tools, which have been utilized for supporting the empirical results. The aim has been to create an explanatory case study consisting relevant discussion on the relationship between the network characteristics and the appearance of trust. The conceptual categorization for confidence vs. trust created by Niklas Luhmann (1979) is another important theoretical building block. In most cases, co-operation in networks is initiated by people already trusting in each other and willing to work together. However, personal trust is not sufficient in the long run to sustain the co-operation within the network: more abstract systemic trust described by Luhmann must also emerge. In the networks with different structures and at different development phases, these forms of trust appear at different levels. In this study, Luhmann’s systemic trust as a term has been replaced by the concept of 'trust in network as a system'. Structural characteristics of a network (density, centrality, structural holes etc.) have been selected to explain the creation of social capital and trust. The ability to adapt new information is essential for the development of social capital. Qualitative analysis for development phase has been used, and the Learning Network Maturity Test by Leenamaija Otala (2000) and her work have been applied. Thus, the qualitative characteristics and the structural characteristics of the networks are utilized together, when the creation of social capital and appearance of trust are assessed. Social Network Analysis, questionnaires and interviews have been the research methods. Quantitative and qualitative data have been combined. There is a similarity in viewpoints to research data with Extensive Case Study method, in which different cases are searched by exploring various cases and comparing certain common features between them and generic models. Development of trust, social capital and organizational learning has been explained in the study by comparing the networks in hand. Being a case study, it doesn't have targets to provide with general results and findings like conventional surveys. However, in this work phenomena and mechanisms related to them are interpreted from the empirical data. Key finding of this study is that the networks with high structural equality and clear target setting enable building trust to the network as a system. When systemic trust is present, e.g. changes in personnel involved in the co-operation won't hinder the network from remaining operational. On the other hand, if the players are not well motivated to co-operate, if the network is extremely centralized structurally, or if the network has players holding very much more beneficial position compared to the others, systemic trust won't develop: trust tends to remain at the personal level, and is directed to some players only. Such networks won't generate results and benefits to its players, and most probably they won’t live very long. In other words, learning networks cannot solely be based on willingness to learn, but also on willingness to co-operate.