Mittausmenetelmien kehittaminen kuplakolonnille

Kuplakolonnireaktoreiden CFD-mallinnus on talla hetkella voimakkaasti kehittyva tutkimusalue. Kaksifaasivirtauksen luotettava simulointi ja mallintaminen on haastavaa kuplakolonnireaktorissa tapahtuvien ilmioiden monimutkaisuuden vuoksi. Reaktorin kayttaytymiseen vaikuttavat tekijat, kuten kolonnin hydrodynamiikka ja aineensiirto, tulee tuntea hyvin ennen mallien tekoa. Tassa tyossa on kokeellisesti tutkittu erilaisten mittausmenetelmien soveltuvuutta kuplakolonnin hydrodynamiikan tutkimiseen. Mittausmenetelmissa on keskitytty erityisesti CFD-mallien vaatimiin paikallisiin mittauksiin. Lisaksi tyossa on arvioitu mittausmenetelmien soveltuvuutta j a luotettavuutta CFD-mallien validointiin. Tyon kirjallisuusosassa on perehdytty kuplakolonnireaktorin hydrodynaamiseen kayttaytymiseen ja siihen vaikuttaviin tekijoihin. Naita ovat mm. reaktorityypit, kaasun dispergointi, virtaustyypit ja -alueet, kaasun tilavuusosuus, kaasukuplan koko ja kuplan nousunopeus. Mittauksia tehtiin kahdessa erikokoisessa kuplakolonnissa, joista pienemman halkaisija oli 0,078 m ja suuremman 0,182 m. Molempien kolonnien nestepinnan korkeus oli 4,62 m. Mittaukset tehtiin vesijohtovedella ja epaorgaanisella prosessiliuoksella. Hydrodynaamisista ominaisuuksista mitattiin kaasun tilavuusosuus, kaasukuplan koko seka kaasukuplan nousunopeus. Kaasun tilavuusosuusmittaukset tehtiin paaasiassa paine-eromittauksella ja joissakin tapauksissa pinnanmittausmenetelmalla. Kuplakoko- ja kuplan nousunopeusmittaukset tehtiin suumopeusvideokameralla ja laser Doppler-anemometrilla. Mittauksissa kaytettiin kahdeksaa erilaista kaasunjakolaitetta, joilla selvitettiin kaasunjakolaitteen ominaisuuksien vaikutusta kolonnin hydrodynamiikkaan. Tuloksista havaittiin, etta nestefaasin ominaisuuksilla oli suuri vaikutus kolonnin hydrodynaamiseen kayttaytymiseen. En kaasunjakolaitteilla vesijohtovedella mitatut hydrodynaamiset ominaisuudet eivat poikenneet paljoa toisistaan, kun taas prosessiliuoksella kaasunjakolaitteiden valille saatiin huomattavat erot. Mittausmenetelmista laser Doppler-anemometri ei kaytettavissa olleella optiikalla soveltunut kaasukuplien mittaamiseen. Kuplat olivat menetelmalle liian suuria. Suumopeusvideokamerallaja paine-eromittauksella paastiin hyviin tuloksiin.

Surface passivation of crystalline silicon by Cat-CVD amorphous and nanocrystalline thin silicon films

In this work, we study the electronic surface passivation of crystalline silicon with intrinsic thin silicon films deposited by Catalytic CVD. The contactless method used to determine the effective surface recombination velocity was the quasi-steady-state photoconductance technique. Hydrogenated amorphous and nanocrystalline silicon films were evaluated as passivating layers on n- and p-type float zone silicon wafers. The best results were obtained with amorphous silicon films, which allowed effective surface recombination velocities as low as 60 and 130 cms -1 on p- and n-type silicon, respectively. To our knowledge, these are the best results ever reported with intrinsic amorphous silicon films deposited by Catalytic CVD. The passivating properties of nanocrystalline silicon films strongly depended on the deposition conditions, especially on the filament temperature. Samples grown at lower filament temperatures (1600 °C) allowed effective surface recombination velocities of 450 and 600 cms -1 on n- and p-type silicon.

Paperikoneen uuden lyhytkiertoprosessin sovellutuskehitys

Työssä tutkittiin uuden ShortFlowÔ-konseptin eri osa-alueiden toimivuutta paperikoneen lyhytkierrossa. Prosessin sekoituspumppuna perinteinen keskipakopumppu korvataan potkuri-pumpulla, joten työssä selvitettiin uudentyyppisen pumpun kavitointirajat, säädettävyys ja sen soveltuminen suunniteltuun tehtävään ja toiminta-alueeseen. Prosessiin kuuluu myös uudentyyppinen viirakaivo, josta selvitettiin sen kyky poistaa ilmaa ja virtauskäyttäytyminen kaivossa. Hienopaperikoneen osalta kartoitettiin prosessiin liittyviä riskejä ja ShortFlowÔ-lyhytkiertoprosessin kannattavuutta investointina. Työn kirjallisessa osassa on käsitelty lyhytkiertoa eri osa-alueittain. Aluksi on lyhytkierron yleisempi tarkastelu, jossa on selvitetty lajittelua, ilmanpoistoa ja pumppauksia. Erityisempää huomiota on kiinnitetty ShortFlowÔ-lyhytkiertoprosessiin liittyviin erityispiirteisiin joita ovat sakeamassalajittelu, täyteaineet paperitehtaalla, hylky ja virtausten sekoittuminen. Sekoituspumpun osalta on käsitelty myös kavitointia hieman tarkemmin. Työn kokeellisessa osassa suunniteltiin prosessin koelaitteisto, joka myös koeajettiin. Potkuripumpun koeajossa määritettiin potkuripumpun toiminta-alue ja säädettävyys. Pumpun todettiin sekoittavan ja ilman vaikutus potkuripumpun ominaisuuksiin todettiin merkityksettömäksi pumpun toiminta-alueella. Viirakaivon koeajossa selvisi, että viirakaivo poistaa ilmaa suunnittelualueella ja kaivolle löytyi muoto, jossa virtauskäyttäytyminen viirakaivossa eri laskeutumisnopeuksilla on mahdollisimman häiriötöntä. Hienopaperikoneen osalta riskien kartoituksessa selvisi, ettei täyteaine aiheuta ongelmia ja että päällystelaattaa sisältävä hylky on lajiteltava ennen lyhytkiertoa. ShortFlowÔ-lyhytkiertoprosessi oli edullisin sekä käyttö- että investointikustannuksiltaan.

Fluid flow processes at basin scale

S u b s u r face fluid flow plays a significant role in many geologic processes and is increasingly being studied in the scale of sedimentary basins and geologic time perspective. Many economic resources such as petroleum and mineral deposits are products of basin scale fluid flow operating over large periods of time. Such ancient flow systems can be studied through analysis of diagenetic alterations and fluid inclusions to constrain physical and chemical conditions of fluids and rocks during their paleohy d r og e o l ogic evolution. Basin simulation models are useful to complement the paleohy d r og e o l ogic record preserved in the rocks and to derive conceptual models on hydraulic basin evolution and generation of economic resources. Different types of fluid flow regimes may evo l ve during basin evolution. The most important with respect to flow rates and capacity for transport of solutes and thermal energy is gr avitational fluid flow driven by the topographic configuration of a basin. Such flow systems require the basin to be elevated above sea level. Consolidational fluid flow is the principal fluid migration process in basins below sea level, caused by loading of compressible rocks. Flow rates of such systems are several orders of magnitude below topogr a p hy driven flow. Howeve r, consolidation may create significant fluid ove rpressure. Episodic dewatering of ove rpressured compart m e n t s m ay cause sudden fluid release with elevated flow velocities and may cause a transient local thermal and chemical disequilibrium betwe e n fluid and rock. This paper gives an ove rv i ew on subsurface fluid flow processes at basin scale and presents examples related to the Pe n e d è s basin in the central Catalan continental margin including the offshore Barcelona half-graben and the compressive South-Pyrenean basin.

Liikesimulaattorialustan kehittäminen virtuaaliprototyypin avulla

Työn tarkoituksena oli kehittää kuuden vapausasteen liikesimulaattorialusta virtuaaliprototyypin avulla siten, että alustan dynamiikka mallinnetaan Adams-ohjelmistolla ja ohjaus- ja säätöpiiri Matlab Simulink:llä. Tarkoituksena oli tutkia dynaamisen mallin ja säätöteknisen mallin yhdistämistä ja niiden yhteen toimimista. Tarkoituksena oli myös selvittää tulevaisuudessa rakennettavan Stewart:n alustan mekaniikan mitat ja hydraulikomponenttien koot. Työssä tutkittiin alustan käyttäytymistä halutulla liikealueella, nopeuksia joita saavutetaan ja mekaanisia rajoitteita. Työn tuloksesta on tarkoitus rakentaa fyysinen prototyyppi liittyen KONSI-projektiin, jossa kehitetään satamanosturisimulaattori nosturiohjaajan koulutuksen tueksi. Malli tullaan kytkemään Teppo Lehtisen diplomityönä tehtyyn satamanosturi kontin simulointimalliin ja koko järjestelmän on tarkoitus toimia reaaliaikaisena.

Hydrodynamics and Heat Transfer in an Airlift Reactor

Työn teoriaosassa esitetään kirjallisuudessa esiintyviä teoreettisia ja kokeellisia yhtälöitä nesteen nopeuden, kaasun tilavuusosuuden, painehäviön ja lämmönsiirron laskemiseksi. Lisäksi käsitellään airlift-reaktoreiden toimintaa, rakennetta ja teollisia sovelluksia, sekä sekoitusta ja geometrian vaikutusta airlift-reaktoreiden hydrodynaamisiin ominaisuuksiin. Kokeellisessa osassa kuvataan käytetty koelaitteisto ja mittausmenetelmät sekä esitetään saadut koetulokset. Koelaitteisto on viidellä nousuputkella varustettu ulkoisen kierron airlift-reaktori. Kokeellisessa osassa pyritään ratkaisemaan tällaisessa reaktorissa mahdollisesti esiintyviä ongelmia, kuten "slug flown" muodostuminen nousuputkissa sekä fluidien epätasainen jakautuminen nousuputkiin. Lisäksi tutkitaan erilaisten muuttujien, kuten kaasun tilavuusvirran, nesteen viskositeetin, suutinkoon ja nesteen jakoputken rakenteen, vaikutusta kaasun tilavuusosuuteen ja nesteen nopeuteen nousuputkissa. Nesteen nopeudet mitataan merkkiainemenetelmällä ja kaasun tilavuusosuudet manometrimenetelmällä. Lämmönsiirtoa tutkitaan mittaamalla lämpötilaeroja nousuputkissa NiCr-Ni –termoelementeillä. Mittaustulosten perusteella muokataan korrelaatiot kaasun tilavuusosuudelle ja nesteen tyhjäputkinopeudelle. Korrelaatioista lasketut tulokset sopivat kohtuullisen hyvin yhteen mitattujen tulosten kanssa. "Slug flown" ei todettu muodostuvan ongelmaksi 2.5 mPa s pienemmillä viskositeetin arvoilla 2 metriä pitkissä ja 19 mm halkaisijaltaan olevissa putkissa. Lisäksi todettiin, että kaasu- ja nestefaasien jakautumisongelmat voidaan ratkaista rakenteellisesti.

Reaction time asymmetries between expansion and contraction

Different asymmetries between expansion and contraction (radial motions) have been reported in the literature. Often these patterns have been regarded as implying different channels for each type of radial direction (outward versus inwards) operating at a higher level of visual motion processing. In two experiments (detection and discrimination tasks) we report reaction time asymmetries between expansion and contraction. Power functions were fitted to the data. While an exponent of 0.5 accounted for the expansion data better, a value of unity yielded the best fit for the contraction data. Instead of interpreting these differences as corresponding to different higher order motion detectors, we regard these findings as reflecting the fact that expansion and contraction tap two distinct psychophysical input channels underlying the processing of fast and slow velocities respectively.

Availability, Cost or Culture ? : Obstacles to Childcare Services for Low-Income Families

Recent research has highlighted the existence of a social bias in the extent to which children have access to childcare. In general, children living in higher income households are more likely to be cared for in childcare centres. While the existence of a social bias in access to childcare services has been clearly demonstrated, we currently lack a clear explanation as to why this is the case. This paper uses a unique dataset based on survey data collected specifically to study patterns of childcare use in the Swiss canton of Vaud (N = 875). The paper exploits the variation in the way childcare is organised within the canton. Childcare is a municipal policy, as a result of which there are twenty-nine different systems in operation. Fees are progressive everywhere, but variation is substantial. Availability is also very different. This peculiar institutional setup provides an ideal situation to examine the determinants of childcare use by different income groups. Our findings suggest that differences in the fees charged to low-income households, as well as the degree of progressivity of the fee structure, are significant predictors of use, while availability seems to matter less.

Deep radio images of the HEGRA and Whipple TeV sources in the Cygnus OB2 region.

The modern generation of Cherenkov telescopes has revealed a new population of gamma-ray sources in the Galaxy. Some of them have been identified with previously known X-ray binary systems while other remain without clear counterparts a lower energies. Our initial goal here was reporting on extensive radio observations of the first extended and yet unidentified source, namely TeV J2032+4130. This object was originally detected by the HEGRA telescope in the direction of the Cygnus OB2 region and its nature has been a matter of debate during the latest years. The situation has become more complex with the Whipple and MILAGRO telescopes new TeV detections in the same field which could be consistent with the historic HEGRA source, although a different origin cannot be ruled out. Aims.We aim to pursue our radio exploration of the TeV J2032+4130 position that we initiated in a previous paper but taking now into account the latest results from new Whipple and MILAGRO TeV telescopes. The data presented here are an extended follow up of our previous work. Methods.Our investigation is mostly based on interferometric radio observations with the Giant Metre Wave Radio Telescope (GMRT) close to Pune (India) and the Very Large Array (VLA) in New Mexico (USA). We also conducted near infrared observations with the 3.5 m telescope and the OMEGA2000 camera at the Centro Astronómico Hispano Alemán (CAHA) in Almería (Spain). Results.We present deep radio maps centered on the TeV J2032+4130 position at different wavelengths. In particular, our 49 and 20 cm maps cover a field of view larger than half a degree that fully includes the Whipple position and the peak of MILAGRO emission. Our most important result here is a catalogue of 153 radio sources detected at 49 cm within the GMRT antennae primary beam with a full width half maximum (FWHM) of 43 arc-minute. Among them, peculiar sources inside the Whipple error ellipse are discussed in detail, including a likely double-double radio galaxy and a one-sided jet source of possible blazar nature. This last object adds another alternative counterpart possibility to be considered for both the HEGRA, Whipple and MILAGRO emission. Moreover, our multi-configuration VLA images reveal the non-thermal extended emission previously reported by us with improved angular resolution. Its non-thermal spectral index is also confirmed thanks to matching beam observations at the 20 and 6 cm wavelengths.

Indications for cardiovascular magnetic resonance in children with congenital and acquired heart disease: an expert consensus paper of the Imaging Working Group of the AEPC and the Cardiovascular Magnetic Resonance Section of the EACVI.

This article provides expert opinion on the use of cardiovascular magnetic resonance (CMR) in young patients with congenital heart disease (CHD) and in specific clinical situations. As peculiar challenges apply to imaging children, paediatric aspects are repeatedly discussed. The first section of the paper addresses settings and techniques, including the basic sequences used in paediatric CMR, safety, and sedation. In the second section, the indication, application, and clinical relevance of CMR in the most frequent CHD are discussed in detail. In the current era of multimodality imaging, the strengths of CMR are compared with other imaging modalities. At the end of each chapter, a brief summary with expert consensus key points is provided. The recommendations provided are strongly clinically oriented. The paper addresses not only imagers performing CMR, but also clinical cardiologists who want to know which information can be obtained by CMR and how to integrate it in clinical decision-making.

Granulomatous Reaction to Pneumocystis jirovecii Diagnosed in a Bronchoalveolar Lavage: A Case Report.

BACKGROUND: Granulomatous reaction to Pneumocystis jirovecii is a rare but well-known pathological finding encountered in the setting of immunosuppression, HIV infection being the most common cause. It can also potentially complicate the treatment of hematological malignancies, typically when drugs lowering the count and function of lymphocytes are used. Lung biopsy is considered the gold standard for the diagnosis of granulomatous P. jirovecii pneumonia, whereas the diffuse alveolar form is usually detected cytologically in bronchoalveolar lavage (BAL). CASE: A female patient pursuing R-CHOP chemotherapy for the treatment of multiple hematological malignancies developed a rapidly progressing dyspnea. Chest CT scans revealed a worsening of a known infiltrative lung disease thought to be secondary to her chemotherapy. Alterations compatible with a drug-induced interstitial lung disease and well-formed focally necrotizing granulomas were observed on an open lung biopsy, but no microorganism was identified with special stains. Eventually, a granulomatous reaction to P. jirovecii was found in a BAL and allowed appropriate treatment with rapid improvement of the dyspnea. CONCLUSION: Because granulomas are tissue-bound structures, they are rarely described in BAL. This article describes the first reported cytological diagnosis of a granulomatous reaction to P. jirovecii and the potential diagnostic interest of such a peculiar finding.

Lajittumisen dynamiikka epäpuhtauksien ja kuitujen painelajittelussa

Viimevuosina kuvantamistekniikat ovat kehittyneet huomattavasti. Näiden uusien tekniikoiden avulla voidaan tarkastella erilaisia prosesseja aiempaa tarkemmin. Painelajittelun teoriat perustuvat pääasiassa makrotason mittauksien pohjalta tehtyihin matemaattisiin malleihin, ja itse lajittumistapahtumaa ei ole aiemmin päästy kovinkaan tarkasti havainnoimaan. Tämän työn tavoitteena olikin selvittää lajittumistapahtumaa uuden kuvantamistekniikan avulla. Työn kirjallisuusosassa esiteltiin lyhyesti painelajitin ja sen toiminta. Myös painelajittelun perusteoriat käytiin lyhyesti läpi. Teoriaosan pääpaino oli lajittumistapahtumassa ja siihen vaikuttavissa tekijöissä. Lisäksi teoriaosassa esiteltiin teollisen painelajittelun nykytilannetta, työtä varten tehdyn esiselvityksen pohjalta. Lajitinsimulaattorikoeajoissa selvitettiin kuitujen ja roskapartikkelien käyttäyty-mistä painelajittimessa kuvantamisen avulla. Kuvauksissa keskityttiin rakosihdin raon tapahtumiin, sekä sihtipinnan tapahtumiin. Kuvamateriaalista laskettiin kuitujen ja roskien liikenopeuksia lankasihtiprofiilin raossa, sekä sihdin pinnalla. Lisäksi tutkittiin kehänopeuden, tuotannon ja sakeuden vaikutusta liike-nopeuksiin. Kuvamateriaalista pyrittiin myös havainnoimaan mahdollista kuitujen takaisinvirtausta. Kuvantamisella saatiin uutta tietoa kuitujen ja roskapartikkelien liikkeestä painelajittimessa. Tuloksista kävi muun muassa ilmi, että roottorin elementin pienimmän välyksen kohdalla akseptoituu huomattava määrä massaa. Tämä selittyy sillä, että pienimmän välyksen kohta tuottaa huomattavan positiivisen painepulssin. Kuitujen ja roskapartikkelien nopeudet raossa noudattelivat muutenkin hyvin selkeästi elementin tuottamaa painepulssia. Lisäksi kuvamateriaalista havaittiin, että sihdin raon suulle kertyy profiilin korkuinen kuituflokki. Koko sihdin peittävää kuitumattoa ei havaittu.

Switzerland as a "fractured" nation

This article deals with Swiss nationalism and Swiss nation-building. Its main thesis is that Switzerland cannot accurately be described as either a nation or a non-nation but is something in between, and could thus best be characterised as a 'fractured' nation. Switzerland has experienced some powerful nationalist moments, from the creation of the Swiss state in 1848 to the last few decades. Yet this recurrent nationalism among the Swiss, considered alongside their more traditional reluctance to consider themselves a nation, make Switzerland a peculiar object: a 'fractured' nation. This flawed process of nation-building in turn reveals some basic characteristics of all nations - inherent artificiality, and the tremendous efforts undertaken to hide it. Switzerland could be considered an unfinished, incomplete nation, and this is precisely why its study can be interesting for scholars of nations and nationalism.

Effect of dripline flushing on subsurface drip irrigation systems

The velocity of dripline flushing in subsurface drip irrigation (SDI) systems affects system design, cost, management, performance, and longevity. A 30‐day field study was conducted at Kansas State University to analyze the effect of four targeted flushing velocities (0.23, 0.30, 0.46, and 0.61 m/s) for a fixed 15 min duration of flushing and three flushing frequencies (no flushing or flushing every 15 or 30 days) on SDI emitter discharge and sediments within the dripline and removed in the flushing water. At the end of the field experiment (371 h), the amount of solids carried away by the flushing water and retained in every lateral were determined as well as laboratory determination of emitter discharge for every single emitter within each dripline. Greater dripline flushing velocities, which also resulted in greater flushing volumes, tended to result in greater amounts of solids in the flushing water, but the differences were not always statistically significant. Neither the frequency of flushing nor the interaction of flushing frequency and velocity significantly affected the amount of solids in the flushing water. There was a greater concentration of solids in the beginning one‐third of the 90 m laterals, particularly for treatments with no flushing or with slower dripline flushing velocities. As flushing velocity and concurrently flushing volume increased, there was a tendency for greater solids removal and/or more equal distribution within the dripline. At the end of the field study, the average emitter discharge as measured in the laboratory for a total of 3970 emitters was 0.64 L/h. which was significantly less (approximately 2.5%) than the discharge for new and unused emitters. Only six emitters were nearly or fully clogged, with discharges between 0% and 5% of new and unused emitters. Flushing velocity and flushing frequency did not have consistent significant effects on emitter discharge, and those numerical differences that did exist were small (<3%). Emitter discharge was approximately 3% less for the distal ends of the driplines (last 20% of the dripline). Although not a specific factor in the study, the results of solids removals during flushing and solids retention within the different dripline sections suggest that duration of flushing may be a more cost‐effective management option than increasing the dripline flushing velocity through SDI system design. Finally, although microirrigation system components have been improved over the years, the need for flushing to remove solids and reduce clogging potential has not been eliminated

Fluid flow in T-junction of pipes

The aim of this work is to study flow properties at T-junction of pipe, pressure loss suffered by the flow after passing through T-junction and to study reliability of the classical engineering formulas used to find head loss for T-junction of pipes. In this we have compared our results with CFD software packages with classical formula and made an attempt to determine accuracy of the classical formulas. In this work we have studies head loss in T-junction of pipes with various inlet velocities, head loss in T-junction of pipes when the angle of the junction is slightly different from 90 degrees and T-junction with different area of cross-section of the main pipe and branch pipe. In this work we have simulated the flow at T-junction of pipe with FLUENT and Comsol Multiphysics and observed flow properties inside the T-junction and studied the head loss suffered by fluid flow after passing through the junction. We have also compared pressure (head) losses obtained by classical formulas by A. Vazsonyi and Andrew Gardel and formulas obtained by assuming T-junction as combination of other pipe components and observations obtained from software experiments. One of the purposes of this study is also to study change in pressure loss with change in angle of T-junction. Using software we can have better view of flow inside the junction and study turbulence, kinetic energy, pressure loss etc. Such simulations save a lot of time and can be performed without actually doing the experiment. There were no real life experiments made, the results obtained completely rely on accuracy of software and numerical methods used.