Composition, abundance and aspects of temporal variation in the distribution of Anopheles species in an area of Eastern Amazonia

Introduction The diverse and complex environmental conditions of the Amazon Basin favor the breeding and development of Anopheles species. This study aimed to describe the composition, abundance and temporal frequency of Anopheles species and to correlate these factors with precipitation, temperature and relative humidity. Methods The study was conducted in the District of Coração, State of Amapá, Brazil. Samples were collected monthly during three consecutive nights, from 6:00 PM to 10:00 PM, from December 2010 to November 2011. In addition, four 12-hour collections (i.e., 6:00 PM to 6:00 AM) were performed during this period. Results A total of 1,230 Anopheles specimens were collected. In the monthly collections, Anopheles darlingi was the predominant species, followed by An. braziliensis and An. albitarsis s.l., whereas An. darlingi, An. peryassui and An. braziliensis were the most frequent species collected in the 12-hour collections. The greatest number of anophelines was collected in September (the dry season). The highest frequency of anophelines was observed for An. darlingi during September, when there were the least rainfalls of the year, along with lower relative humidity and higher temperatures. There was little variation in the abundance of this species in other months, with the exception of slight increases in February, July and August. Conclusions The major malaria vectors, An. darlingi and An. albitarsis s.l. (likely An. marajoara), were the most abundant species collected in the study area. Consequently, prevention and control measures should be taken to prevent malaria outbreaks in the District of Coração.

Fishing the key biological components of the bacterium Geobacter metallireducens for optimal biotechnological applications

Os resultados apresentados no capítulo 2 foram incluídos no artigo Dantas JM, Campelo LM, Duke NEC, Salgueiro CA, Pokkuluri PR (2015) "The structure of PccH from Geobacter sulfurreducens – a novel low reduction potential monoheme cytochrome essential for accepting electrons from an electrode", FEBS Journal, 282, 2215-2231.

Geographical distribution of Trypanosoma cruzi in triatomine vectors in the State of Mato Grosso do Sul, Brazil

Introduction This work presents the initial findings of a molecular epidemiological investigation of Trypanosoma cruzi in triatomine insects in State of Mato Grosso do Sul. Methods A total of 511 triatomines from different regions of the state were examined. Deoxyribonucleic acid (DNA) was extracted from the intestinal contents of the insects using phenol-chloroform-isoamyl alcohol (25:24:1). Polymerase chain reaction (PCR) using primers 121/122 targeting DNA kinetoplast (kDNA) was then performed to identify T. cruzi, and positive samples were subjected to PCR using the primer pair TcSC5D-F/R followed by restriction fragment length polymorphism (RFLP) with the restriction enzymes SphI and HpaI (1 U/reaction), cloning and sequencing. Results One hundred samples were positive for T. cruzi, and three discrete typing units (DTUs) were identified (TcI, TcII, and TcBat). Triatoma sordida had the highest T. cruzi occurrence (83.3%), and DTUs were found in three samples: 58.3% of the samples were TcI, 33.3% were TcII and 8.3% were TcBat. There was a clear geographical distribution of the DTUs throughout the state, with TcI, TcII and TcBat located in the center, TcI located in the east, and TcII located in the west. Conclusions This study showed the occurrence of overlapping DTUs in State of Mato Grosso do Sul. The distributions of the DTUs were different, with TcI, TcII and TcBat in the center of the state, TcI predominantly in the east, and TcII in the west. Further studies may reveal a more defined mosaic distribution of DTUs in MS.

The changing distribution of malaria in the Brazilian Amazon, 2003-2004 and 2008-2009

Introduction More than half of the malaria cases reported in the Americas are from the Brazilian Amazon region. While malaria is considered endemic in this region, its geographical distribution is extremely heterogeneous. Therefore, it is important to investigate the distribution of malaria and to determine regions whereby action might be necessary. Methods Changes in malaria indicators in all municipalities of the Brazilian Amazon between 2003-2004 and 2008-2009 were studied. The malaria indicators included the absolute number of malaria cases and deaths, the bi-annual parasite incidence (BPI), BPI ratios and differences, a Lorenz curve and Gini coefficients. Results During the study period, mortality from malaria remained low (0.02% deaths/case), the percent of municipalities that became malaria-free increased from 15.6% to 31.7%, and the Gini coefficient increased from 82% to 87%. In 2003, 10% of the municipalities with the highest BPI accumulated 67% of all malaria cases, compared with 2009, when 10% of the municipalities (with the highest BPI) had 80% of the malaria cases. Conclusions This study described an overall decrease in malaria transmission in the Brazilian Amazon region. As expected, an increased heterogeneity of malaria indicators was found, which reinforces the notion that a single strategy may not bring about uniformly good outcomes. The geographic clustering of municipalities identified as problem areas might help to define better intervention methods.

Distribution of extended-spectrum β-lactamase types in a Brazilian tertiary hospital

INTRODUCTION: Epidemiological data on the prevalence of extended-spectrum β-lactamases (ESBLs) are scarce in Brazil despite the fact that these data are essential for empirical treatment and control measures. The objective of this study was to evaluate the prevalence of different ESBLs by type and distribution in a tertiary hospital in southern Brazil. METHODS: We evaluated 1,827 enterobacterial isolates between August 2003 and March 2008 isolated from patients at a tertiary hospital. Samples were identified using a Vitek automated system and were confirmed by biochemical testing. The identified ESBL strains were characterized by phenotypic methods, polymerase chain reaction (PCR), and sequencing. Genetic similarities were evaluated by pulsed-field gel electrophoresis. RESULTS: It was 390 (21.3%) ESBL-producing strains, which expressed the ESBLs CTX-M (292), SHV (84), CTX and SHV (10), TEM (2), and PER (2). CONCLUSIONS: The prevalence of ESBL-expressing strains was high, especially in Klebsiella pneumoniae and Enterobacter spp. CTX-M was the predominant type of ESBL observed, and its genetic variability indicates a polyclonal distribution.

Spatial analysis of visceral leishmaniasis in the municipality of Rondonópolis, in the Brazilian State of Mato Grosso, from 2003 to 2012: human, canine and vector distribution in areas of disease transmission

INTRODUCTION: Visceral leishmaniasis (VL) is a zoonosis of great importance to public health and is considered a neglected disease by the World Health Organization. The disease has expanded and become more prevalent in urban areas in Brazil. METHODS: Geospatial analyses were performed and thematic maps of the triad of the disease were produced for the study period (2003-2012) in the urban area of the municipality of Rondonópolis in the midwestern State of Mato Grosso (MT), Brazil, TerraView 4.2.2 software was used for the analyses. RESULTS: A total of 87.9% of the 186 confirmed human cases of VL were cured. Children between the ages of 1 and 4 were the most affected. Registered deaths were predominant among adults aged 60 years or older. The urban area of the municipality consists of eight strata and 12 census districts include 237 neighborhoods. All sectors had confirmed cases of VL. During the study period, human cases of the disease were recorded in 90 neighborhoods. The 23 deaths from the disease were distributed in 21 neighborhoods. Sandflies carrying the parasite were captured in 192 out of 200 neighborhoods evaluated for the presence of the VL vector. The presence of dogs carrying the parasite was confirmed in, 140 out of 154 surveyed neighborhoods. CONCLUSIONS: The data demonstrated the endemic nature of VL, with a high percentage of infected children, a high distribution of canine infection, and a wide adaptation and dispersal of the vectors in the urban environment. These results, illustrate the process of urbanization of VL in the municipality of Rondonópolis, MT, Brazil.

Cryptococcosis in Atlántico, Colombia: an approximation of the prevalence of this mycosis and the distribution of the etiological agent in the environment

ABSTRACTINTRODUCTION:Cryptococcosis is an invasive disease acquired by inhalation of infectious propagules from the environment. Currently, compulsory notification of the spread of this disease is not required in Colombia. However, reporting of human immunodeficiency virus (HIV)/acquired immune deficiency syndrome cases to the National Surveillance System has suggested that there is a growing population at risk of contracting cryptococcosis. Few studies have described the occurrence of cryptococcosis in Colombia. Therefore, in this study, we examined the pathology of this disease in Atlántico, Colombia and determined the distributions of Cryptococcus neoformans and Cryptococcus gattii in the environment.METHODS:Clinical samples/isolates were gathered from cases of cryptococcosis previously diagnosed at health institutions in Atlántico, and surveys were completed by clinicians. The environmental study considered 32 sampling points and three tree species, i.e., Quickstick ( Gliricidia sepium ), Almond ( Terminalia catappa ), and Pink trumpet ( Tabebuia rosea ). Environmental and clinical samples/isolates were analyzed for phenotypic and genotypic confirmation.RESULTS:From 1997-2014, 41 cases of cryptococcosis were reported. The mean patient age was 40.5 years (range: 18-63 years); 76% were men, and 78% were HIV positive. Isolation was possible in 38 cases ( C. neoformans , molecular type VNI in 37 cases and C. gattii , molecular type VGI in one case). In 2012-2014, 2,068 environmental samples were analyzed with a positivity of 0.4% ( C. neoformans , molecular type VNI) in Almond and Pink trumpet trees.CONCLUSIONS:Cryptococcus neoformans , molecular type VNI had a higher prevalence than C. gattii and was associated with human exposure and the pathogenesis of cryptococcosis in this geographical region.

Temporal distribution of tuberculosis in the State of Amazonas, Brazil

Tuberculosis (TB) is one of the infectious diseases that contributes most to the morbidity and mortality of millions of people worldwide. Brazil is one of 22 countries that accounts for 80% of the tuberculosis global burden. The highest incidence rates in Brazil occur in the States of Amazonas and Rio de Janeiro. The aim of this study was to describe the temporal distribution of TB in the State of Amazonas. Between 2001 and 2011, 28,198 cases of tuberculosis were reported in Amazonas, distributed among 62 municipalities, with the capital Manaus reporting the highest (68.7%) concentration of cases. Tuberculosis was more prevalent among males (59.3%) aged 15 to 34 years old (45.5%), whose race/color was predominantly pardo (64.7%) and who had pulmonary TB (84.3%). During this period, 81 cases of multidrug-resistant TB were registered, of which the highest concentration was reported from 2008 onward (p = 0.002). The municipalities with the largest numbers of indigenous individuals affected were São Gabriel da Cachoeira (93%), Itamarati (78.1%), and Santa Isabel do Rio Negro (70.1%). The future outlook for this region includes strengthening the TB control at the primary care level, by expanding diagnostic capabilities, access to treatment, research projects developed in collaboration with the Dr. Heitor Vieira Dourado Tropical Medicine Foundation .;Fundação de Medicina Tropical Dr. Heitor Vieira Dourado (FMT-HVD).; and financing institutions, such as the project for the expansion of the Clinical Research Center and the creation of a hospital ward for individuals with transmissible respiratory diseases, including TB.

Distribution of hepatitis B infection in Brazil: the epidemiological situation at the beginning of the 21 st century

Abstract Brazil was formerly considered a country with intermediate hepatitis B endemicity, with large heterogeneity between Brazilian regions and areas of high prevalence, especially in the Amazon basin. Systematic vaccination of children was initiated in 1998. Between 2004 and 2009, a large population-based study reported decreased prevalence in all regions of Brazil. This review analyzed the current hepatitis B epidemiological situation in Brazil through a systematic search of the scientific literature in MEDLINE, LILACS, and CAPES thesis database, as well as disease notifications to the Information System for Notifiable Diseases. The search strategy identified 87 articles and 13 theses, resulting in 100 total publications. The most recent results indicate reduced hepatitis B prevalence nationwide, classifying Brazil as having low endemicity. Most studies showed HBV carrier prevalence less than 1%. However, there are still isolated regions with increased prevalence, particularly the Amazon, as well as specific groups, such as homeless people in large cities and isolated Afro-descendant communities in the center of the country. This review alsao detected successful vaccination coverage reported in a few studies around the country. The prevalence of anti-HBs alone ranged from 50% to 90%. However, isolated and distant localities still have low coverage rates. This review reinforces the downward trend of hepatitis B prevalence in Brazil and the need to intensify vaccination strategies for young people and adults in specific regions with persisting higher HBV infection prevalence.

Spatial distribution of disseminated histoplasmosis and AIDS co-infection in an endemic area of Northeastern Brazil

Abstract: INTRODUCTION: The spatial distribution of disseminated histoplasmosis (DH) and acquired immunodeficiency syndrome (AIDS) co-infection in adult residents of Fortaleza, Ceará, Brazil was evaluated. METHODS: Socio-demographic data for the DH/AIDS cases were obtained from a reference hospital, and socio-environmental indicators were obtained from an official Brazilian institute. Kernel analysis and local indicators of spatial autocorrelation (LISA) cluster maps were used to estimate the case density within the city. RESULTS: DH/AIDS cases were concentrated in the Northwestern and Southwestern peripheral areas of the city, related with low human development indices, but different from AIDS cases distribution. CONCLUSION: Risk factors other than AIDS infection must affect histoplasmosis development in this area.

Prevalence and genotype distribution of human papillomavirus: implications for cancer screening and vaccination in Henan province, China

Abstract: INTRODUCTION: To provide information for cervical cancer screening and vaccination in Henan province, China, the distribution of human papillomavirus (HPV) was analyzed. METHODS: The HPV genotypes were detected using gene array and flow-through hybridization. RESULTS: Overall, 38.1% (1,536/4,033) of the women were human papillomavirus deoxyribonucleic acid (HPV DNA) positive. The prevalence of high-risk HPV types was 32.4%. HPV 16 was the most prevalent genotype (8.9%), followed by HPV 52 (5.8%) and HPV 58 (4.4%). CONCLUSIONS: The data support close surveillance of women for cervical cancer screening, and HPV prophylactic vaccines including HPV16, HPV 52, and HPV 58 might offer greater protection in this area.

Development of an experimental setup for metal cutting research

Analytical, numerical and experimental models have been developed over time to try to characterize and understand the metal cutting process by chip removal. A true knowledge of the cutting process by chip removal is required by the increasing production, by the quality requirements of the product and by the reduced production time, in the industries in which it is employed. In this thesis an experimental setup is developed to evaluate the forces and the temperature distribution in the tool according to the orthogonal cutting model conditions, in order to evaluate its performance and its possible adoption in future works. The experimental setup is developed in a CNC lathe and uses an orthogonal cutting configuration, in which thin discs fixed onto a mandrel are cut by the cutting insert. In this experimental setup, the forces are measured by a piezoelectric dynamometer while temperatures are measured by thermocouples placed juxtaposed to the side face of the cutting insert. Three different solutions are implemented and evaluated for the thermocouples attachment in the cutting insert: thermocouples embedded in thermal paste, thermocouples embedded in copper plate and thermocouples brazed in the cutting insert. From the tests performed in the experimental setup it is concluded that the adopted forces measurement technique shows a good performance. Regarding to the adopted temperatures measurement techniques, only the thermocouples brazed in the cutting insert solution shows a good performance for temperature measurement. The remaining solutions show contact problems between the thermocouple and the side face of the cutting insert, especially when the vibration phenomenon intensifies during the cut. It is concluded that the experimental setup does not present a sufficiently robust and reliable performance, and that it can only be used in future work after making improvements in the assembly of the thermocouples.

Cost of drugs manufactured by the University Hospital - role of the Central Pharmacy

The hospital pharmacy in large and advanced institutions has evolved from a simple storage and distribution unit into a highly specialized manipulation and dispensation center, responsible for the handling of hundreds of clinical requests, many of them unique and not obtainable from commercial companies. It was therefore quite natural that in many environments, a manufacturing service was gradually established, to cater to both conventional and extraordinary demands of the medical staff. That was the case of Hospital das Clinicas, where multiple categories of drugs are routinely produced inside the pharmacy. However, cost-containment imperatives dictate that such activities be reassessed in the light of their efficiency and essentiality. METHODS: In a prospective study, the output of the Manufacturing Service of the Central Pharmacy during a 12-month period was documented and classified into three types. Group I comprised drugs similar to commercially distributed products, Group II included exclusive formulations for routine consumption, and Group III dealt with special demands related to clinical investigations. RESULTS: Findings for the three categories indicated that these groups represented 34.4%, 45.3%, and 20.3% of total manufacture orders, respectively. Costs of production were assessed and compared with market prices for Group 1 preparations, indicating savings of 63.5%. When applied to the other groups, for which direct equivalent in market value did not exist, these results would suggest total yearly savings of over 5 100 000 US dollars. Even considering that these calculations leave out many components of cost, notably those concerning marketing and distribution, it might still be concluded that at least part of the savings achieved were real. CONCLUSIONS: The observed savings, allied with the convenience and reliability with which the Central Pharmacy performed its obligations, support the contention that internal manufacture of pharmaceutical formulations was a cost-effective alternative in the described setting.

Control in distribution networks with demand side management

The way in which electricity networks operate is going through a period of significant change. Renewable generation technologies are having a growing presence and increasing penetrations of generation that are being connected at distribution level. Unfortunately, a renewable energy source is most of the time intermittent and needs to be forecasted. Current trends in Smart grids foresee the accommodation of a variety of distributed generation sources including intermittent renewable sources. It is also expected that smart grids will include demand management resources, widespread communications and control technologies required to use demand response are needed to help the maintenance in supply-demand balance in electricity systems. Consequently, smart household appliances with controllable loads will be likely a common presence in our homes. Thus, new control techniques are requested to manage the loads and achieve all the potential energy present in intermittent energy sources. This thesis is focused on the development of a demand side management control method in a distributed network, aiming the creation of greater flexibility in demand and better ease the integration of renewable technologies. In particular, this work presents a novel multi-agent model-based predictive control method to manage distributed energy systems from the demand side, in presence of limited energy sources with fluctuating output and with energy storage in house-hold or car batteries. Specifically, here is presented a solution for thermal comfort which manages a limited shared energy resource via a demand side management perspective, using an integrated approach which also involves a power price auction and an appliance loads allocation scheme. The control is applied individually to a set of Thermal Control Areas, demand units, where the objective is to minimize the energy usage and not exceed the limited and shared energy resource, while simultaneously indoor temperatures are maintained within a comfort frame. Thermal Control Areas are overall thermodynamically connected in the distributed environment and also coupled by energy related constraints. The energy split is performed based on a fixed sequential order established from a previous completed auction wherein the bids are made by each Thermal Control Area, acting as demand side management agents, based on the daily energy price. The developed solutions are explained with algorithms and are applied to different scenarios, being the results explanatory of the benefits of the proposed approaches.

Analysis and design of sinusoidal quadrature RC-oscillators

Modern telecommunication equipment requires components that operate in many different frequency bands and support multiple communication standards, to cope with the growing demand for higher data rate. Also, a growing number of standards are adopting the use of spectrum efficient digital modulations, such as quadrature amplitude modulation (QAM) and orthogonal frequency division multiplexing (OFDM). These modulation schemes require accurate quadrature oscillators, which makes the quadrature oscillator a key block in modern radio frequency (RF) transceivers. The wide tuning range characteristics of inductorless quadrature oscillators make them natural candidates, despite their higher phase noise, in comparison with LC-oscillators. This thesis presents a detailed study of inductorless sinusoidal quadrature oscillators. Three quadrature oscillators are investigated: the active coupling RC-oscillator, the novel capacitive coupling RCoscillator, and the two-integrator oscillator. The thesis includes a detailed analysis of the Van der Pol oscillator (VDPO). This is used as a base model oscillator for the analysis of the coupled oscillators. Hence, the three oscillators are approximated by the VDPO. From the nonlinear Van der Pol equations, the oscillators’ key parameters are obtained. It is analysed first the case without component mismatches and then the case with mismatches. The research is focused on determining the impact of the components’ mismatches on the oscillator key parameters: frequency, amplitude-, and quadrature-errors. Furthermore, the minimization of the errors by adjusting the circuit parameters is addressed. A novel quadrature RC-oscillator using capacitive coupling is proposed. The advantages of using the capacitive coupling are that it is noiseless, requires a small area, and has low power dissipation. The equations of the oscillation amplitude, frequency, quadrature-error, and amplitude mismatch are derived. The theoretical results are confirmed by simulation and by measurement of two prototypes fabricated in 130 nm standard complementary metal-oxide-semiconductor (CMOS) technology. The measurements reveal that the power increase due to the coupling is marginal, leading to a figure-of-merit of -154.8 dBc/Hz. These results are consistent with the noiseless feature of this coupling and are comparable to those of the best state-of-the-art RC-oscillators, in the GHz range, but with the lowest power consumption (about 9 mW). The results for the three oscillators show that the amplitude- and the quadrature-errors are proportional to the component mismatches and inversely proportional to the coupling strength. Thus, increasing the coupling strength decreases both the amplitude- and quadrature-errors. With proper coupling strength, a quadrature error below 1° and amplitude imbalance below 1% are obtained. Furthermore, the simulations show that increasing the coupling strength reduces the phase noise. Hence, there is no trade-off between phase noise and quadrature error. In the twointegrator oscillator study, it was found that the quadrature error can be eliminated by adjusting the transconductances to compensate the capacitance mismatch. However, to obtain outputs in perfect quadrature one must allow some amplitude error.