Compact and autonomous multiwavelength microanalyzer for in-line and in situ colorimetric determinations

Nowadays, the attainment of microsystems that integrate most of the stages involved in an analytical process has raised an enormous interest in several research fields. This approach provides experimental set-ups of increased robustness and reliability, which simplify their application to in-line and continuous biomedical and environmental monitoring. In this work, a novel, compact and autonomous microanalyzer aimed at multiwavelength colorimetric determinations is presented. It integrates the microfluidics (a three-dimensional mixer and a 25 mm length "Z-shape" optical flow-cell), a highly versatile multiwavelength optical detection system and the associated electronics for signal processing and drive, all in the same device. The flexibility provided by its design allows the microanalyzer to be operated either in single fixed mode to provide a dedicated photometer or in multiple wavelength mode to obtain discrete pseudospectra. To increase its reliability, automate its operation and allow it to work under unattended conditions, a multicommutation sub-system was developed and integrated with the experimental set-up. The device was initially evaluated in the absence of chemical reactions using four acidochromic dyes and later applied to determine some key environmental parameters such as phenol index, chromium(VI) and nitrite ions. Results were comparable with those obtained with commercial instrumentation and allowed to demonstrate the versatility of the proposed microanalyzer as an autonomous and portable device able to be applied to other analytical methodologies based on colorimetric determinations.

Mapping the Energy Distribution of SERRS Hot Spots from Anti-Stokes to Stokes Intensity Ratios

The anomalies in the anti-Stokes to Stokes intensity ratios in single-molecule surface-enhanced resonance Raman scattering were investigated. Brilliant green and crystal violet dyes were the molecular probes, and the experiments were carried out on an electrochemically activated Ag surface. The results allowed new insights into the origin of these anomalies and led to a new method to confirm the single-molecule regime in surface-enhanced Raman scattering. Moreover, a methodology to estimate the distribution of resonance energies that contributed to the imbalance in the anti-Stokes to Stokes intensity ratios at the electromagnetic hot spots was proposed. This method allowed the local plasmonic resonance energies on the metallic surface to be spatially mapped.

Tributyltin in crustacean tissues: analytical performance and validation of method

The hermit crab Clibanarius vittatus is a typical organism from intertidal regions being considered as a good bioindicator of tributyltin presence at these environments. Thus this study presents the analytical performance and validation method for TBT quantification in tissues of C. vittatus by gas chromatography with pulsed flame photometric detector (GC-PFPD) after extraction with an apolar solvent (toluene) and Grignard derivatization. The limits of detection of the method (LOD) were 2.0 and 2.8 ng g-1 for TBT and DBT (dibutyltin), respectively, and its limits of quantification (LOQ) were 6.6 and 8.9 ng g-1 for TBT and DBT, respectively. The method was applied to samples from Santos Estuary, São Paulo State, Brazil. TBT and DBT concentrations ranged from 26.7 to 175.0 ng g-1 and from 46.2 to 156.0 ng g-1, respectively. These concentrations are worrisome since toxic effects (such as endocrine disruption) have been reported for other organisms even under lower levels of registred at this study.

In vivo assessment of specific cytotoxic T lymphocyte killing

The direct killing of target cells by cytotoxic T lymphocytes (CTLs) plays a fundamental role in protective immunity to viral, bacterial, protozoan and fungi infections, as well as to tumor cells. In vivo cytotoxic assays take into account the interaction of target and effector cells in the context of the proper microenvironment making the analysis biologically more relevant than in vitro cytotoxic assays. Thus, the development, improvement and validation of in vivo methods are necessary in view of the importance of the results they may provide. We describe and discuss in this manuscript a method to evaluate in vivo specific cytotoxic T lymphocyte killing. We used as model system mice immunized with human recombinant replication-deficient adenovirus 5 (HAd5) containing different transgenes as the trigger of a CTL-mediated immune response. To these mice, we adoptively transferred syngeneic cells labeled with different vital fluorescent dyes. Donor cells were pulsed (target) or not (control non-target) with distinct CD8 T-cell epitopes, mixed in a 1:1 ratio and injected i.v. into immunized or non-immunized recipient mice. After 18-24h, spleen cells are collected and analysed by flow cytometry. A deviation from the 1:1 ratio of control and target cell populations indicates antigen specific lysis of target cells

Moluscos gasterópodos como bioindicadores en el Archipiélago canario: de procesos naturales a causas antropogénicas

Se han eliminado páginas en blanco

Organismi acquatici e ambiente: meccanismi biochimici di interazione, risposta e adattamento

The research is focused on the relationship between some Mg2+-dependent ATPase activities of plasma- and mitochondrial membranes from tissues of cultured marine bivalve molluscs and potentially stressful environmental conditions, such as the exposure to contaminants both of natural origin (ammonia nitrogen, the main contaminant of aquaculture plants) and of anthropic source (alkyltins). The two filter-feeding bivalve species selected colonize different habitats: the common mussel Mytilus galloprovincialis binds to hard substrates and the Philippine clam Tapes philippinarum burrows into sea bottom sandy beds. The choice of typical species of coastal waters, extremely suitable for environmental studies due to their features of poor motility, resistance to transport and great filtering efficiency, may constitute a model to evaluate responses to contaminants of membrane-bound enzyme activities involved in key biochemical mechanisms, namely cell ionic regulation and mitochondrial energy production. In vitro and in vitro approaches have been pursued. In vitro assays were carried out by adding the contaminants (NH4Cl and alkyltins) directly to the ATPase reaction media. In vivo experiments were carried out by exposing mussels to various tributyl tin (TBT) concentrations under controlled conditions in aquaria. ATPase activities were determined spectrophotometrically according to the principles of the method of Fiske and Subbarow (1925). The main results obtained are detailed below. In Tapes philippinarum the interaction of NH4 +, the main form of ammonia nitrogen at physiological and seawater pHs, with the Na,K-ATPase and the ouabaininsensitive Na-ATPase was investigated in vitro on gill and mantle microsomal membranes. The proven replacement by NH4 +of K+ in the activation of the Na,KATPase and of Na+ in the activation of the ouabain-insensitive ATPase displayed similar enzyme affinity for the substituted cation. on the one hand this finding may represent one of the possible mechanisms of ammonia toxicity and, on the other, it supports the hypothesis that NH4 + can be transported across the plasma membrane through the two ATPases. In this case both microsomal ATPases may be involved and co-operate, at least under peculiar circumstances, to nitrogen excretion and ammonia detoxification mechanisms in bivalve molluscs. The two ATPase activities stimulated by NH4 + maintained their typical response to the glycoside ouabain, specific inhibitor of the Na,K-ATPase, being the Na++ NH4 +-activated ATPase even more susceptive to the inhibitor and the ouabain-insensitive ATPase activity activated indifferently by Na+ or NH4 + unaffected by up to 10-2 M ouabain. In vitro assays were carried out to evaluate the response of the two Na-dependent ATPases to organotins in clams and mussels and to investigate the interaction of TBT with mussel mitochondrial oligomycin-sensitive Mg-ATPase. Since no literature data were available, the optimal assay conditions and oligomycin sensitivity of mussel mitochondrial MgATPase were determined. In T. philippinarum the ouabain-insensitive Na-ATPase was found to be refractory to TBT both in the gills and in the mantle, whereas the Na,K-ATPase was progressively inhibited by increasing TBT doses; the enzyme inhibition was more pronounced in the gills than in the mantle. In both tissues of M. galloprovincialis the Na,K-ATPase inhibition by alkyltins decreased in the order TBT>DBT(dibutyltin)>>MBT(monobutyltin)=TeET(tetraethyltin) (no effect). Mussel Na-ATPase confirmed its refractorimess to TBT and derivatives both in the gills and in the mantle. These results indicate that the Na,K-ATPase inhibition decreases as the number of alkyl chains bound to tin decreases; however a certain polarity of the organotin molecule is required to yield Na,K-ATPase inhibition, since no enzyme inhibition occurred in the presence of tetraalkyl-substituted derivatives such as TeET . Assays carried out in the presence of the dithioerythritol (DTE) pointed out that the sulphhydrylic agent is capable to prevent the Na,K-ATPase inhibition by TBT, thus suggesting that the inhibitor may link to -SH groups of the enzyme complex.. Finally, the different effect of alkyltins on the two Na-dependent ATPases may constitute a further tool to differentiate between the two enzyme activities. These results add to the wealth of literature data describing different responses of the two enzyme activities to endogenous and exogenous modulators . Mussel mitochondrial Mg-ATPase was also found to be in vitro inhibited by TBT both in the gills and in the mantle: the enzyme inhibition followed non competitive kinetics. The failed effect of DTE pointed out that in this case the interaction of TBT with the enzyme complex is probably different from that with the Na,K-ATPase. The results are consistent with literature data showing that alkyltin may interact with enzyme structures with different mechanisms. Mussel exposure to different TBT sublethal doses in aquaria was carried out for 120 hours. Two samplings (after 24 and 120 hrs) were performed in order to evaluate a short-term response of gill and mantle Na,K-ATPase, ouabain-insensitive Na-ATPase and Mg-ATPase activities. The in vivo response to the contaminants of the enzyme activities under study was shown to be partially different from that pointed out in the in vitro assays. Mitochondrial Mg-ATPase activity appeared to be activated in TBTexposed mussels with respect to control ones, thus confirming the complexity of evaluating in vivo responses of the enzyme activities to contaminants, due to possible interactions of toxicants with molluscan metabolism. Concluding, the whole of data point out that microsomal and mitochondrial ATPase activities of bivalve molluscs are generally responsive to environmental contaminants and suggest that in some cases membrane-bound enzyme activities may represent the molecular target of their toxicity. Since the Na,K-ATPase, the Na-ATPase and the Mg-ATPase activities are poorly studied in marine bivalves, this research may contribute to enlarge knowledge in this quite unexplored field.

Design and Characterization of New Luminescent Sensors and Labels

The aim of this Ph.D. project has been the design and characterization of new and more efficient luminescent tools, in particular sensors and labels, for analytical chemistry, medical diagnostics and imaging. Actually both the increasing temporal and spatial resolutions that are demanded by those branches, coupled to a sensitivity that is required to reach the single molecule resolution, can be provided by the wide range of techniques based on luminescence spectroscopy. As far as the development of new chemical sensors is concerned, as chemists we were interested in the preparation of new, efficient, sensing materials. In this context, we kept developing new molecular chemosensors, by exploiting the supramolecular approach, for different classes of analytes. In particular we studied a family of luminescent tetrapodal-hosts based on aminopyridinium units with pyrenyl groups for the detection of anions. These systems exhibited noticeable changes in the photophysical properties, depending on the nature of the anion; in particular, addition of chloride resulted in a conformational change, giving an initial increase in excimeric emission. A good selectivity for dicarboxylic acid was also found. In the search for higher sensitivities, we moved our attention also to systems able to perform amplification effects. In this context we described the metal ion binding properties of three photoactive poly-(arylene ethynylene) co-polymers with different complexing units and we highlighted, for one of them, a ten-fold amplification of the response in case of addition of Zn2+, Cu2+ and Hg2+ ions. In addition, we were able to demonstrate the formation of complexes with Yb3+ an Er3+ and an efficient sensitization of their typical metal centered NIR emission upon excitation of the polymer structure, this feature being of particular interest for their possible applications in optical imaging and in optical amplification for telecommunication purposes. An amplification effect was also observed during this research in silica nanoparticles derivatized with a suitable zinc probe. In this case we were able to prove, for the first time, that nanoparticles can work as “off-on” chemosensors with signal amplification. Fluorescent silica nanoparticles can be thus seen as innovative multicomponent systems in which the organization of photophysically active units gives rise to fruitful collective effects. These precious effects can be exploited for biological imaging, medical diagnostic and therapeutics, as evidenced also by some results reported in this thesis. In particular, the observed amplification effect has been obtained thanks to a suitable organization of molecular probe units onto the surface of the nanoparticles. In the effort of reaching a deeper inside in the mechanisms which lead to the final amplification effects, we also attempted to find a correlation between the synthetic route and the final organization of the active molecules in the silica network, and thus with those mutual interactions between one another which result in the emerging, collective behavior, responsible for the desired signal amplification. In this context, we firstly investigated the process of formation of silica nanoparticles doped with pyrene derivative and we showed that the dyes are not uniformly dispersed inside the silica matrix; thus, core-shell structures can be formed spontaneously in a one step synthesis. Moreover, as far as the design of new labels is concerned, we reported a new synthetic approach to obtain a class of robust, biocompatible silica core-shell nanoparticles able to show a long-term stability. Taking advantage of this new approach we also showed the synthesis and photophysical properties of core-shell NIR absorbing and emitting materials that proved to be very valuable for in-vivo imaging. In general, the dye doped silica nanoparticles prepared in the framework of this project can conjugate unique properties, such as a very high brightness, due to the possibility to include many fluorophores per nanoparticle, high stability, because of the shielding effect of the silica matrix, and, to date, no toxicity, with a simple and low-cost preparation. All these features make these nanostructures suitable to reach the low detection limits that are nowadays required for effective clinical and environmental applications, fulfilling in this way the initial expectations of this research project.

Mechanosensitivity in the myenteric plexus of the guinea pig ileum

The enteric nervous system regulates autonomously from the central nervous system all the reflex pathways that control blood flow, motility, water and electrolyte transport and acid secretion. The ability of the gut to function in isolation is one of the most intriguing phenomenons in neurogastroenterology. This requires coding of sensory stimuli by cells in the gut wall. Enteric neurons are prominent candidates to relay mechanosensitivity. Surprisingly, the identity of mechanosensitive neurons in the enteric nervous system as well as the appropriate stimulus modality is unknown despite the evidence that enteric neurons respond to sustained distension. Objectives: The aim of our study was to record from mechanosensitive neurons using physiological stimulus modalities. Identification of sensory neurons is of central importance to understand sensory transmission under normal conditions and in gut diseases associated with sensorimotor dysfunctions, such as Irritable Bowel Syndrome. Only then it will be possible to identify novel targets that help to normalise sensory functions. Methods: We used guinea-pig ileum myenteric plexus preparations and recorded responses of all neurons in a given ganglion with a fast neuroimaging technique based on voltage sensitive dyes. To evoke a mechanical response we used two different kinds of stimuli: firstly we applied a local mechanical distortion of the ganglion surface with von Frey hair. Secondarily we mimic the ganglia deformation during physiological movements of myenteric ganglia in a freely contracting ileal preparation. We were able to reliably and reproducibly mimic this distortion by intraganglionic injections of small volumes of oxygenated and buffered Krebs solution using stimulus parameters that correspond to single contractions. We also performed in every ganglion tested, electrical stimulations to evoke fast excitatory postsynaptic potentials. Immunohistochemistry reactions were done with antibodies against Calbindin and NeuN, considered markers for sensory neurons. Results: Recordings were performed in 46 ganglia from 31 guinea pigs. In every ganglion tested we found from 1 to 21 (from 3% to 62%) responding cells with a median value of 7 (24% of the total number of neurons). The response consisted of an almost instantaneous spike discharge that showed adaptation. The median value of the action potential frequency in the responding neurons was 2.0 Hz, with a recording time of 1255 ms. The spike discharge lasted for 302 ± 231 ms and occurred only during the initial deformation phase. During sustained deformation no spike discharge was observed. The response was reproducible and was a direct activation of the enteric neurons since it remained after synaptic blockade with hexamethonium or ω-conotoxin and after long time perfusion with capsaicin. Muscle tone appears not to be required for activation of mechanosensory neurons. Mechanosensory neurons showed a response to mechanical stimulation related to the stimulus strength. All mechanosensory neurons received fast synaptic inputs. There was no correlation between mechanosensitivity and Calbindin-IR and NeuN-IR (44% of mechanosensitive neurones Calb-IR-/NeuN-IR-). Conclusions: We identified mechanosensitive neurons in the myenteric plexus of the guinea pig ileum which responded to brief deformation. These cells appear to be rapidly accommodating neurons which respond to dynamic change. All mechanosensitive neurons received fast synaptic input suggesting that their activity can be highly modulated by other neurons and hence there is a low stimulus fidelity which allows adjusting the gain in a sensory network. Mechanosensitivity appears to be a common feature of many enteric neurons belonging to different functional classes. This supports the existence of multifunctional enteric neurons which may fulfil sensory, integrative and motor functions.

Ingegnerizzazione e design di nanoparticelle core-shell di magnetite/silice

In the past decade the study of superparamagnetic nanoparticles has been intensively developed for many biomedical applications such as magnetically assisted drug delivery, MRI contrast agents, cells separation and hyperthermia therapy. All of these applications require nanoparticles with high magnetization, equipped also with a suitable surface coating which has to be non-toxic and biocompatible. In this master thesis, the silica coating of commercially available magnetic nanoparticles was investigated. Silica is a versatile material with many intrinsic features, such as hydrophilicity, low toxicity, proper design and derivatization yields particularly stable colloids even in physiological conditions. The coating process was applied to commercial magnetite particles dispersed in an aqueous solution. The formation of silica coated magnetite nanoparticles was performed following two main strategies: the Stöber process, in which the silica coating of the nanoparticle was directly formed by hydrolysis and condensation of suitable precursor in water-alcoholic mixtures; and the reverse microemulsions method in which inverse micelles were used to confine the hydrolysis and condensation reactions that bring to the nanoparticles formation. Between these two methods, the reverse microemulsions one resulted the most versatile and reliable because of the high control level upon monodispersity, silica shell thickness and overall particle size. Moving from low to high concentration, within the microemulsion region a gradual shift from larger particles to smaller one was detected. By increasing the amount of silica precursor the silica shell can also be tuned. Fluorescent dyes have also been incorporated within the silica shell by linking with the silica matrix. The structure of studied nanoparticles was investigated by using transmission electron microscope (TEM) and dynamic light scattering (DLS). These techniques have been used to monitor the syntetic procedures and for the final characterization of silica coated and silica dye doped nanoparticles. Finally, field dependent magnetization measurements showed the magnetic properties of core-shell nanoparticles were preserved. Due to a very well defined structure that combines magnetic and luminescent properties together with the possibility of further functionalization, these multifunctional nanoparticles are potentially useful platforms in biomedical fields such as labeling and imaging.

Amphiphile Kern-Schale-my-Netzwerke auf der Basis von Polyorganosiloxanen

Die Synthese funktionalisierter Polyorganosiloxan-µ-Netzwerke (Rh = 5 – 30 nm) gelingt durch Polycokondensation von Alkoxysilanen. Die entstehenden sphärischen Teilchen sind in unpolaren organischen Lösungsmitteln partikulär dispergierbar. Durch die sequentielle Zugabe der Silanmonomere können Kern-Schale-Partikel mit unterschiedlichen Teilchenarchitekturen realisiert werden. In der vorliegenden Arbeit wird p-Chlormethylphenyltrimethoxysilan als funktionalisiertes Monomer verwendet, um den µ-Netzwerken durch eine anschließende Quaternisierung der Chlorbenzylgruppen mit Dimethylaminoethanol amphiphile Eigenschaften zu verleihen. Durch den Kern-Schale-Aufbau der Partikel sind die hydrophilen Bereiche im Kugelinneren von der hydrophoben äußeren Schale separiert, was unerläßlich für die Verwendung der Partikel zur Verkapselung wasserlöslicher Substanzen ist.So können in den amphiphilen µ-Netzwerken beispielsweise wasserlösliche Farbstoffe verkapselt werden. Diese diffundieren sowohl aus Lösung als auch aus dem Festkörper in das geladene Partikelinnere und werden dort angereichert. Es wird eine Abhängigkeit der Farbstoffbeladung vom Quaternisierungsgrad gefunden, wobei die Anzahl an verkapselten Farbstoffmolekülen mit dem Quaternisierungsgrad zunimmt.Weiterhin können amphiphile µ-Gelpartikel auch als molekulare Nanoreaktoren zur Synthese von Edelmetallkolloiden verwendet werden, die in den Netzwerken topologisch gefangen sind. Hierzu werden zuerst Metallionen im Kugelinneren verkapselt und anschließend reduziert, wobei das Kolloidwachstum durch den wohldefinierten Reaktionsraum gesteuert wird. Neben Gold- und Palladiumkolloiden können auf diese Weise beispielsweise auch Silberkolloide in den Kernen von µ-Netzwerken hergestellt werden.

Solvatationsdynamik: lokales Relaxationsverhalten glasbildender Systeme

In dieser Arbeit wurde das lokale Relaxationsverhalten niedermolekularer glasbildender Materialien mit der Methode der Solvatationsdynamik untersucht. Bei dieser Methode werden phosphoreszente Farbstoffe als molekulare Sonden für die lokale Dynamik im Glasbildner eingesetzt. Je nach verwendeter Sonde sind unterschiedliche Eigenschaften zugänglich:Mit Farbstoffen, die ihr Dipolmoment bei optischer Anregung nicht ändern, wird eine mechanische Solvatation gemessen, die die lokale viskoelastische Antwort des Materials widerspiegelt. Mit Farbstoffen, die eine Änderung des Dipolmoments bei optischer Anregung aufweisen,sind zusätzlich lokale dielektrische Eigenschaften des Materials zugänglich, die bei endlicher Polarität des Lösungsmittels dominieren. Das heterogene Relaxationsverhalten des Glasbildners 2-Methyltetrahydrofuran wurde quantitativ untersucht.Auf einem Temperaturbereich, auf dem die mittlere Relaxationszeit um mehr als 4 Dekaden variiert, konnte gezeigt werden, daß die Relaxation lokal rein exponentiell verläuft. Zur Abschätzung von Reichweiteneffekten wurden Solvatationsmessungen in einschränkenden Geometrien in Form von porösen Sol-Gel Gläsern mit Porendurchmessern zwischen 7,5-2,5 nm durchgeführt. Der Einfluß der Beschaffenheit der Porenoberfläche wurde durch Vergleichzwischen der Solvatation in nativen und in silanisierten Gläsern untersucht. Es wurde gezeigt, daß auch in den kleinsten verwendeten silanisierten Poren alle Charakteristika des jeweiligen Bulk-Systems erhalten bleiben.In den nativen porösen Gläsern dagegen führt der Einfluß der stark polaren Oberfläche zu einer Änderung der Dynamik.

Oberflächenplasmonen-artige Resonanzen auf metallischen Gittern

Die Geometrie einer Metalloberfläche bestimmt die Wechselwirkung zwischen der Oberflächenplasmonenresonanz und anderen Energieformen wie Photonen, anderen Oberflächenplasmonen und molekularen Anregungen. In dieser Arbeit wird der Einfluss dieser Effekte auf die optischen Eigenschaften von metallischen Reliefgittern untersucht.Aufgrund von Modellrechungen werden auf tiefen Gitterstrukturen Resonanzen erwartet, die sich als selbstgekoppelte Oberflächenplasmonen interpretieren lassen. Diese Resonanzen wurden aufgrund der Symmetrie des elektromagnetischen Feldes klassifiziert. Es wurden tiefe Gitter mit unterschiedlichen Profilformen hergestellt, die die experimentelle Beobachtung von drei gekoppelten Resonanzen erlauben. Variationen in der Tiefe und Asymmetrie der Gitter sowie in der experimentellen Geometrie zeigen die theoretisch vorausgesagten Effekte.Fluoreszenzfarbstoffe können mit elektromagnetischen Oberflächenresonanzen Energie austauschen. Die Lokalisierung des elektrischen Feldes von gekoppelten Resonanzen führt zu einer Ortsabhängigkeit der Kopplung, die bei 'freien' Oberflächenplasmonen nicht beobachtet wird. Ein theoretisches Modell ist in der Lage, die experimentellen Befunde weitgehend zu beschreiben. Die Ortsabhägigkeit der photochemischen Zerstörungsrate erlaubt die Anwendung dieses Effektes zur Messung von Diffusionsphänomenen in dünnen Filmen.Des weiteren wurde die Polarisationsabhängigkeit der Anregung von Oberflächenplasmonen wurde in konischer Reflexionsgeometrie und die Rolle der Oberflächenplasmonen in der thermisch induzierten Lichtemission untersucht. Ferner wurde eine vereinfachte Auswertungsroutine zur Anwendung von Gittern in der Untersuchung von dünnen dielektrischen Filmen entwickelt.

Derivati polimerici organometallici ancorati su matrice inorganica per applicazioni in chimica fine

Organotin compounds have found in the last few decades a wide variety of applications. Indeed, they are used successfully as antifouling paints, PVC stabilizers and ion carriers, as well as homogeneous catalysts. In this context, it has been proved that the Lewis acidity of the metal centre allows these compounds to promote the reaction between alcohol and ester. However their use is now limited by their well-known toxicity, moreover they are hardly removable from the reaction mixture. This problem can be overcome by grafting the organotin derivative onto a polymeric cross-linked support. In this way the obtained heterogeneous catalyst can be easily filtered off from the reaction mixture, thus creating the so-called "clean organotin reagents", avoiding the presence of toxic organotin residues in solution and the tin release in the environment. In the last few years several insoluble polystyrene resins containing triorganotin carboxylate moieties have been synthesized with the aim of improving their catalytic activity: in particular we have investigated and opportunely modified their chemical structure in order to optimize the accessibility to the metal centre and its Lewis acidity. Recently, we replaced the polymeric matrix with an inorganic one, in order to dispose of a relatively cheaper and easily available support. For this purpose an ordered mesoporous silica, characterized by 2D-hexagonal pores, named MCM-41, and an amorphous silica have been selected. In the present work two kinds of MCM-41 silica containing the triorganotin carboxylate moiety have been synthesized starting from a commercial Cab-O-Sil M5 silica. These catalysts have two different spacers between the core and the tin-carboxylate moiety, namely a polyaliphatic chain (compound FT29) or a poliethereal one (compound FT6), with the aim to improve the interaction between catalyst and reacting ester. Three catalysts supported onto an amorphous silica have been also synthesized: the structure is the same as silica FT29, i.e. a compound having a polialiphatic chain, and they have different percentage of organotin derivative grafted on the silica surface (10, 30, 50% respectively for silica MB9, SU27 and SU28). The performances of the above silica as heterogeneous catalysts in transesterification reactions have been tested in a model reaction between ethyl acetate and 1-octanol, a primary alcohol sensitive to the reaction conditions. The alcohol conversion was assessed by gas-chromatography, determining the relative amount of transesterified product and starting alcohol after established time intervals.

Rylenfarbstoffe in nanoskopischen Systemen

ZusammenfassungDurch die Funktionalisierung des Chromophors Tetraphenoxyperylendiimid mit vier Ethinylgruppen stand ein Farbstoff zur Verfügung, welcher sich als Kernmolekül für den Aufbau von Polyphenylendendrimeren eignet. Ausgehend von dem Farbstoffkern wurden drei Dendrimergenerationen synthetisiert. Durch die Dendronisierung wird die Aggregation des zentralen Farbstoffs im Festkörper verhindert, weshalb das G1-Dendrimer als aktive Schicht in LED´s eingesetzt wurde und zur Verbesserung dieser Bauelemente führte. Weiterhin wurde auch die Oberfläche der Polyphenylendendrimere mit 4, 8 bzw. 16 Perylenmonoimidfarbstoffen funktionalisiert. Durch zeitaufgelöste Absorptions- und Emissionsmessungen und Einzelmolekülspektroskopie des G2-Dendrimers wurde ein photophysikalisches Modell des multichromophoren Systems entwickelt.Neben Polyphenylendendrimeren dienten auch Emulsionspolymerisate, Miniemulsionspolymerisate und Halbleiterkristalle als nanoskopische Trägermaterialien für Rylenfarbstoffe. Für die Anknüpfung an Lartices wurden amino- und styrylfunktionalisierte Perylen- und Terrylenchromophore dargestellt, was zu einer statistischen Verteilung der Farbstoffe auf der Oberfläche bzw. im Inneren führte. Außerdem wurden Rylenfarbstoffe als stabile Fluoreszenzmarkierung von Metallocenkatalysatoren eingesetzt. Silica- und polymergeträgerte markierte Katalysatoren wurden zur Polymerisation von Ethylen verwendet und lieferten fluoreszente PE-Produkte, ohne Einfluß auf die Polymerisation zu nehmen. Zum Einen wurde mit Hilfe der Dotierung der heterogenen Polymerisationskatalysatoren der Verbleib des fragmentierten Trägermaterials in den PE-Produktpartikeln detektiert. Zum Anderen erlaubt der Einsatz unterschiedlich fluoreszierender Markierungsgruppen die Durchführung eines kombinatorischen Verfahrens zum Testen von Polymerisationskatalysatoren.

Synthese und Struktur-Eigenschafts-Beziehungen von Oligo- und Poly(2,5-dipropoxy-1,4-phenylenethinylen)en

Oligomere mit konjugierten pi-Elektronensystemen sind für die Materialwissenschaften von großer Bedeutung. Die vielfältigen und umfangreichen Forschungen auf diesem Gebiet gründen im Potenzial dieser Substanzklassen, das im Bereich der Laserfarbstoffe, Leuchtdioden, Photoleiter, optische Schalter oder auch der molekularen Elektronik angesiedelt ist. Zu diesen gehören auch die in dieser Arbeit synthetisierten und untersuchten Phenylenethinylene. Die Herstellung der Oligomere erfolgt nach der Methode von Sonogashira und Hagihara. Dabei wird ein Halogenaren mit einer Alkinkomponente zur Reaktion gebracht. Als Katalysator dient dabei ein Gemisch aus Bis(triphenylphosphin-palladiumdichlorid), Kupfer-(I)-iodid und Triphenylphosphin. Verwendung fanden bei der Synthese zwei Arten von Schutzgruppen. Es handelt sich dabei einerseits um die Trimethylsilyl- und die Triisopropylsilyl-Funktion, die unabhängig voneinander in ein System eingeführt werden und selektiv wieder entfernt werden können. Die zweite Art sind die Halogene Brom und Iod, die aufgrund ihrer Eigenschaft vielmehr als 'dormant group' bezeichnet werden müssen. Eine Ethinylierung führt zunächst zur Substitution des Iod- und anschließend des Bromatoms. Die so erhaltenen Oligomere werden mit verschiedenen spektroskopischen Methoden untersucht. Besonderes Interesse liegt dabei auf der Bestimmung der effektiven Konjugationslänge (EKL). Damit ist es möglich, die Länge des konjugierten Systems zu bestimmen, das für die betreffenden Eigenschaften des entsprechenden Polymers maßgeblich ist. Das nichtlineare optische Verhalten der Oligomere wird mittels der Third-Harmonic-Generation-Methode (THG) gemessen. Die resultierende Größe, die Suszeptibilität 3. Ordnung, gibt Aufschluß über mögliche industrielle Anwendungen.