Ion balance in waters through inductively coupled plasma optical emission spectrometry

Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES) has been employed to carry out the determination of both major anions and cations in water samples. The anion quantification has been performed by means of a new automatic accessory. In this device chloride has been determined by continuously adding a silver nitrate solution. As a result solid silver chloride particles are formed and retained on a nylon filter inserted in the line. The emission intensity is read at a silver characteristic wavelength. By plotting the drop in silver signal versus the chloride concentration, a straight line is obtained. As regards bicarbonate, this anion has been on-line transformed into carbon dioxide with the help of a 2.0 mol L−1 nitric acid stream. Carbon signal is linearly related with bicarbonate concentration. Finally, information about sulfate concentration has been achieved by means of the measurement of sulfur emission intensity. All the steps have been simultaneously and automatically performed. With this setup detection limits have been 1.0, 0.4 and 0.09 mg L−1 for chloride, bicarbonate and sulfate, respectively. Furthermore, it affords good precision with RSD below 6 %. Cation (Ca, Mg, Na and K) concentration, in turn, has been obtained by simultaneously reading the emission intensity at characteristic wavelengths. The obtained limits of detection have been 8 × 10−3, 2 × 10−3, 8 × 10−4 and 10−2 mg L−1 for sodium, potassium, magnesium and calcium, respectively. As regards sample throughput, about 30 samples h−1 can be analysed. Validation results have revealed that the obtained concentrations for these anions are not significantly different as compared to the data provided by conventional methods. Finally, by considering the data for anions and cations, precise ion balances have been obtained for well and mineral water samples.

Expert survey on priorities for the information society in the Caribbean

An on-line survey of experts was conducted to solicit their views on policy priorities in the area of information and communication technologies (ICT) in the Caribbean. The experts considered the goal to “promote teacher training in the use of ICTs in the classroom” to be the highest priority, followed by goals to “reduce the cost of broadband services” and “promote the use of ICT in emergency and disaster prevention, preparedness and response.” Goals in the areas of cybercrime, e-commerce, egovernment, universal service funds, consumer protection, and on-line privacy rounded out the top 10. Some of the lowest ranked goals were those related to coordinating the management of infrastructure changes. These included the switchover for digital terrestrial television (DTT) and digital FM radio, cloud computing for government ICT, the introduction of satellite-based internet services, and the installation of content distribution networks (CDNs). Initiatives aimed at using ICT to promote specific industries, or specific means of promoting the digital economy, tended toward the centre of the rankings. Thus, a general pattern emerged which elevated the importance of focusing on how ICT is integrated into the broader society, with economic issues a lower priority, and concerns about coordination on infrastructure issues lower still.

A funny thing happened on the way to the forum: Electronic discussion and foreign language learning

Amongst the opportunities for cross-cultural contact created by the burgeoning use of the Internet are those provided by electronic discussion lists. This study looks at what happens when language students venture out of the classroom (virtual or otherwise) to participate in on-line discussion groups with native speakers. Responses to messages and commentary by moderators and other participants on the (in) appropriateness of contributions allow us to determine what constitutes successful participation and to make suggestions regarding effective teaching strategies for this medium. A case study examines the threads started by four anglophone students of French when they post messages to a forum on the Web site of the French newspaper Le Monde. Investigation of these examples points to the ways in which electronic discussion inflects and is inflected by cultural and generic expectations. We suggest that successful participation on Internet fora depends on awareness of such cultural and generic mores and an ability to work within and/or with them. Teachers therefore need to find ways in which students can be sensitized to such issues so that their participation in such electronic discussion is no longer seen as linguistic training, but as engagement with a cultural practice.

Validity of accelerometry for measurement of activity in people with brain injury

Purpose: To evaluate the validity of a uniaxial accelerometer (MTI Actigraph) for measuring physical activity in people with acquired brain injury (ABI) using portable indirect calorimetry (Cosmed K4b(2)) as a criterion measure. Methods: Fourteen people with ABI and related gait pattern impairment (age 32 +/- 8 yr) wore an MTI Actigraph that measured activity (counts(.)min-(1)) and a Cosmed K4b(2) that measured oxygen consumption (mL(.)kg(-1.)min(-1)) during four activities: quiet sitting (QS) and comfortable paced (CP), brisk paced (BP), and fast paced (FP) walking. MET levels were predicted from Actigraph counts using a published equation and compared with Cosmed measures. Predicted METs for each of the 56 activity bouts (14 participants X 4 bouts) were classified (light, moderate, vigorous, or very vigorous intensity) and compared with Cosmed-based classifications. Results: Repeated-measures ANOVA indicated that walking condition intensities were significantly different (P < 0.05) and the Actigraph detected the differences. Overall correlation between measured and predicted METs was positive, moderate, and significant (r = 0.74). Mean predicted METs were not significantly different from measured for CP and BP, but for FP walking, predicted METs were significantly less than measured (P < 0.05). The Actigraph correctly classified intensity for 76.8% of all activity bouts and 91.5% of light- and moderate-intensity bouts. Conclusions: Actigraph counts provide a valid index of activity across the intensities investigated in this study. For light to moderate activity, Actigraph-based estimates of METs are acceptable for group-level analysis and are a valid means of classifying activity intensity. The Actigraph significantly underestimated higher intensity activity, although, in practice, this limitation will have minimal impact on activity measurement of most community-dwelling people with ABI.

MÍDIAS DIGITAIS SOCIAIS NO AUXÍLIO AO EAD: As Novas Tecnologias da Informação e da Comunicação como processo facilitador na relação de ensino-aprendizagem

No presente trabalho investigou-se a adoção por parte das instituições educacionais dos recursos e ferramentas disponíveis nas mídias digitais sociais, que permitem a comunicação síncrona e assíncrona, estimula a comunicação para maior interatividade, dialogicidade e colaboração entre os atores envolvidos no processo ensino-aprendizagem da educação a distância. Para tanto, verificou-se como os alunos que estudam na EAD reagem às novas possibilidades oferecidas com o advento das novas tecnologias da informação e comunicação - NTICs. O estudo focou os alunos que estavam, no momento da pesquisa, cursando os segundos bimestres dos Cursos de Tecnólogos em: Marketing, Logística, Recursos Humanos e Gestão Comercial em EAD, das universidades Anhanguera e Metodista, dos pólos de São Caetano do Sul e Mauá. Na seleção da amostra, optou-se pelo modelo não probabilístico do tipo intencional, adotando-se o critério de que os alunos selecionados conheciam os recursos e as ferramentas utilizadas nas mídias digitais sociais das instituições. Como instrumento de medida, utilizou-se um questionário tipo Likert composto por 7 dimensões e 32 assertivas, além da técnica de entrevista de grupo focal, totalizando 5 encontros. Resgatou-se historicamente alguns pontos sobre o movimento das novas tecnologias, sobretudo as digitais, bem como a educação na modalidade a distância, desde o século passado até a atualidade. Além disso, procurou-se entender o quanto as ações governamentais têm apoiado as transformações tecnológicas que impactam direta e indiretamente nos aspectos educacionais. Outro tema abordado para a discussão desse trabalho foi a Sociedade do Conhecimento, que tem papel de suma importância para o desenvolvimento e avanço das Novas Tecnologias da Comunicação e Informação. As discussões para as análises dos resultados foram norteadas pela Teoria da Ação Comunicativa de Habermas que ajudou a compreender e indicar a importância dos conceitos vistos sobre o mundo da Vida e o mundo do Sistema, dentro da realidade atual da EAD e das NTCs. Os dados apontaram que os alunos que estudam nessas duas Universidades são em sua maioria, casados, possuidores de filhos e pretendem com seus estudos dar um salto qualitativo em suas carreiras, acessam a internet de suas residências, local de trabalho e nas universidades que estudam. São conhecedores e aproveitam as Mídias Digitais Sociais - MDS oferecidas por suas universidades e as utilizam para se comunicarem com seus colegas e seus professores, mas, interagem melhor com as ferramentas oferecidas pelo mercado, que estão disponíveis na Internet e fazem uso de forma bastante significativa do mensageiro e-mail para a comunicação entre seus colegas. A pesquisa também assinalou que, o público pesquisado pertencente à geração de imigrantes digitais se adapta e utiliza relativamente bem as ferramentas oferecidas por ambas as Universidades. Entretanto, também indicou que, os recursos e as ferramentas digitais oferecidas pela instituição de ensino que podem facilitar o processo comunicacional dentro das instituições educacionais são conhecidos, mas, ainda se encontram aquém, frente às possibilidades oferecidas pelas novas tecnologias digitais utilizadas no mercado. Para a maioria, as MDS são de grande importância e facilitam o processo comunicacional dentro da relação de ensino-aprendizagem, entretanto, apontam que o diálogo poderia ser mais dinâmico se houvesse por parte dos professores ou tutores EAD maior interação on-line. A pesquisa assinalou que as mídias digitais sociais e suas ferramentas, oferecidas pelo mercado e que são utilizadas fora da rede do EAD, por serem mais interativas e intuitivas e estarem vinculadas a um ambiente mais descontraído, permitem maior colaboração e uma comunicação muito mais ágil do que as vivenciadas na rede EAD.

Point-wise confidence interval estimation by neural networks: A comparative study based on automotive engine calibration.

In developing neural network techniques for real world applications it is still very rare to see estimates of confidence placed on the neural network predictions. This is a major deficiency, especially in safety-critical systems. In this paper we explore three distinct methods of producing point-wise confidence intervals using neural networks. We compare and contrast Bayesian, Gaussian Process and Predictive error bars evaluated on real data. The problem domain is concerned with the calibration of a real automotive engine management system for both air-fuel ratio determination and on-line ignition timing. This problem requires real-time control and is a good candidate for exploring the use of confidence predictions due to its safety-critical nature.

Computer control of chemical process plants with special reference to distillation

A sieve plate distillation column has been constructed and interfaced to a minicomputer with the necessary instrumentation for dynamic, estimation and control studies with special bearing on low-cost and noise-free instrumentation. A dynamic simulation of the column with a binary liquid system has been compiled using deterministic models that include fluid dynamics via Brambilla's equation for tray liquid holdup calculations. The simulation predictions have been tested experimentally under steady-state and transient conditions. The simulator's predictions of the tray temperatures have shown reasonably close agreement with the measured values under steady-state conditions and in the face of a step change in the feed rate. A method of extending linear filtering theory to highly nonlinear systems with very nonlinear measurement functional relationships has been proposed and tested by simulation on binary distillation. The simulation results have proved that the proposed methodology can overcome the typical instability problems associated with the Kalman filters. Three extended Kalman filters have been formulated and tested by simulation. The filters have been used to refine a much simplified model sequentially and to estimate parameters such as the unmeasured feed composition using information from the column simulation. It is first assumed that corrupted tray composition measurements are made available to the filter and then corrupted tray temperature measurements are accessed instead. The simulation results have demonstrated the powerful capability of the Kalman filters to overcome the typical hardware problems associated with the operation of on-line analyzers in relation to distillation dynamics and control by, in effect, replacirig them. A method of implementing estimator-aided feedforward (EAFF) control schemes has been proposed and tested by simulation on binary distillation. The results have shown that the EAFF scheme provides much better control and energy conservation than the conventional feedback temperature control in the face of a sustained step change in the feed rate or multiple changes in the feed rate, composition and temperature. Further extensions of this work are recommended as regards simulation, estimation and EAFF control.

Effect of age related macular degeneration on the Eger macular stressometer photostress recovery time

Aim: To assess the repeatability of Eger macular stressometer (EMS) measures of photostress recovery and determine their association with other measures of visual function. Methods: EMS photostress recovery time was measured in 90 patients with bilateral exudative age related macular degeneration (AMD), 19 with bilateral atrophic AMD and 47 with both forms of the condition (mean age 79 (SD 13) years). Measurements were made on two occasions separated by 1 year. Intrasession repeatability was assessed by repeating the measures after a 10 minute recovery period at the first visit. Distance visual acuity was measured with a logMAR chart, near visual acuity with a MNRead chart at 25 cm, contrast sensitivity with a Pelli-Robson chart, and the presence of central visual disturbance assessed with an Amsler grid. A questionnaire was used to assess self reported difficulties with glare recovery. Results: The average EMS recovery time was 11.0 (SD 8.9) seconds, decreasing by 1.6 (5.2) seconds on repeated measurement (p<0.05). EMS photostress recovery was not correlated with visual function measures or subjective difficulties with lights (p>0.05). EMS photostress recovery time did not predict those whose vision decreased over the following year compared with those among whom it remained stable. Conclusions: The EMS test is not a useful tool in determining the severity or progression of AMD.

'I felt that I do live in the UK now':international students' self-reports of their English language speaking experiences on a pre-sessional programme

This article focuses on the English language experiences of a group of pre-sessional students, an under-represented group in the literature on language and education. In particular, it investigates the opportunities that such students have to use English outside the classroom, shown to be a key factor in student satisfaction with their study abroad experience. Drawing on data from questionnaires, interviews and on-line diaries, we show that students have a variety of opportunities to use English; however, these opportunities may require students to engage in complex negotiations right from the beginning of their sojourn in the UK. Micro-analysis of the data shows that agency is a key construct in understanding students' representations of their English encounters as they begin their lives in the UK. The article concludes with some suggestions as to how pre-sessional courses may develop students' linguistic and socio-cultural skills in order that they may interact successfully in English outside the classroom. © 2011 Taylor &Francis.

Gasification of biomass in a downdraft reactor

The objective of this study was to design, construct, commission and operate a laboratory scale gasifier system that could be used to investigate the parameters that influence the gasification process. The gasifier is of the open-core variety and is fabricated from 7.5 cm bore quartz glass tubing. Gas cleaning is by a centrifugal contacting scrubber, with the product gas being flared. The system employs an on-line dedicated gas analysis system, monitoring the levels of H2, CO, CO2 and CH4 in the product gas. The gas composition data, as well as the gas flowrate, temperatures throughout the system and pressure data is recorded using a BBC microcomputer based data-logging system. Ten runs have been performed using the system of which six were predominantly commissioning runs. The main emphasis in the commissioning runs was placed on the gas clean-up, the product gas cleaning and the reactor bed temperature measurement. The reaction was observed to occur in a narrow band, of about 3 to 5 particle diameters thick. Initially the fuel was pyrolysed, with the volatiles produced being combusted and providing the energy to drive the process, and then the char product was gasified by reaction with the pyrolysis gases. Normally, the gasifier is operated with reaction zone supported on a bed of char, although it has been operated for short periods without a char bed. At steady state the depth of char remains constant, but by adjusting the air inlet rate it has been shown that the depth of char can be increased or decreased. It has been shown that increasing the depth of the char bed effects some improvement in the product gas quality.

On a distinction between casual and formative variable models:theoretical issues and practical implications for organizational researchers

Formative measurement has seen increasing acceptance in organizational research since the turn of the 21st Century. However, in more recent times, a number of criticisms of the formative approach have appeared. Such work argues that formatively-measured constructs are empirically ambiguous and thus flawed in a theory-testing context. The aim of the present paper is to examine the underpinnings of formative measurement theory in light of theories of causality and ontology in measurement in general. In doing so, a thesis is advanced which draws a distinction between reflective, formative, and causal theories of latent variables. This distinction is shown to be advantageous in that it clarifies the ontological status of each type of latent variable, and thus provides advice on appropriate conceptualization and application. The distinction also reconciles in part both recent supportive and critical perspectives on formative measurement. In light of this, advice is given on how most appropriately to model formative composites in theory-testing applications, placing the onus on the researcher to make clear their conceptualization and operationalisation.

Uses of frontier efficiency methodologies and multi-criteria decision making for performance measurement in the energy sector

Guest editorial Ali Emrouznejad is a Senior Lecturer at the Aston Business School in Birmingham, UK. His areas of research interest include performance measurement and management, efficiency and productivity analysis as well as data mining. He has published widely in various international journals. He is an Associate Editor of IMA Journal of Management Mathematics and Guest Editor to several special issues of journals including Journal of Operational Research Society, Annals of Operations Research, Journal of Medical Systems, and International Journal of Energy Management Sector. He is in the editorial board of several international journals and co-founder of Performance Improvement Management Software. William Ho is a Senior Lecturer at the Aston University Business School. Before joining Aston in 2005, he had worked as a Research Associate in the Department of Industrial and Systems Engineering at the Hong Kong Polytechnic University. His research interests include supply chain management, production and operations management, and operations research. He has published extensively in various international journals like Computers & Operations Research, Engineering Applications of Artificial Intelligence, European Journal of Operational Research, Expert Systems with Applications, International Journal of Production Economics, International Journal of Production Research, Supply Chain Management: An International Journal, and so on. His first authored book was published in 2006. He is an Editorial Board member of the International Journal of Advanced Manufacturing Technology and an Associate Editor of the OR Insight Journal. Currently, he is a Scholar of the Advanced Institute of Management Research. Uses of frontier efficiency methodologies and multi-criteria decision making for performance measurement in the energy sector This special issue aims to focus on holistic, applied research on performance measurement in energy sector management and for publication of relevant applied research to bridge the gap between industry and academia. After a rigorous refereeing process, seven papers were included in this special issue. The volume opens with five data envelopment analysis (DEA)-based papers. Wu et al. apply the DEA-based Malmquist index to evaluate the changes in relative efficiency and the total factor productivity of coal-fired electricity generation of 30 Chinese administrative regions from 1999 to 2007. Factors considered in the model include fuel consumption, labor, capital, sulphur dioxide emissions, and electricity generated. The authors reveal that the east provinces were relatively and technically more efficient, whereas the west provinces had the highest growth rate in the period studied. Ioannis E. Tsolas applies the DEA approach to assess the performance of Greek fossil fuel-fired power stations taking undesirable outputs into consideration, such as carbon dioxide and sulphur dioxide emissions. In addition, the bootstrapping approach is deployed to address the uncertainty surrounding DEA point estimates, and provide bias-corrected estimations and confidence intervals for the point estimates. The author revealed from the sample that the non-lignite-fired stations are on an average more efficient than the lignite-fired stations. Maethee Mekaroonreung and Andrew L. Johnson compare the relative performance of three DEA-based measures, which estimate production frontiers and evaluate the relative efficiency of 113 US petroleum refineries while considering undesirable outputs. Three inputs (capital, energy consumption, and crude oil consumption), two desirable outputs (gasoline and distillate generation), and an undesirable output (toxic release) are considered in the DEA models. The authors discover that refineries in the Rocky Mountain region performed the best, and about 60 percent of oil refineries in the sample could improve their efficiencies further. H. Omrani, A. Azadeh, S. F. Ghaderi, and S. Abdollahzadeh presented an integrated approach, combining DEA, corrected ordinary least squares (COLS), and principal component analysis (PCA) methods, to calculate the relative efficiency scores of 26 Iranian electricity distribution units from 2003 to 2006. Specifically, both DEA and COLS are used to check three internal consistency conditions, whereas PCA is used to verify and validate the final ranking results of either DEA (consistency) or DEA-COLS (non-consistency). Three inputs (network length, transformer capacity, and number of employees) and two outputs (number of customers and total electricity sales) are considered in the model. Virendra Ajodhia applied three DEA-based models to evaluate the relative performance of 20 electricity distribution firms from the UK and the Netherlands. The first model is a traditional DEA model for analyzing cost-only efficiency. The second model includes (inverse) quality by modelling total customer minutes lost as an input data. The third model is based on the idea of using total social costs, including the firm’s private costs and the interruption costs incurred by consumers, as an input. Both energy-delivered and number of consumers are treated as the outputs in the models. After five DEA papers, Stelios Grafakos, Alexandros Flamos, Vlasis Oikonomou, and D. Zevgolis presented a multiple criteria analysis weighting approach to evaluate the energy and climate policy. The proposed approach is akin to the analytic hierarchy process, which consists of pairwise comparisons, consistency verification, and criteria prioritization. In the approach, stakeholders and experts in the energy policy field are incorporated in the evaluation process by providing an interactive mean with verbal, numerical, and visual representation of their preferences. A total of 14 evaluation criteria were considered and classified into four objectives, such as climate change mitigation, energy effectiveness, socioeconomic, and competitiveness and technology. Finally, Borge Hess applied the stochastic frontier analysis approach to analyze the impact of various business strategies, including acquisition, holding structures, and joint ventures, on a firm’s efficiency within a sample of 47 natural gas transmission pipelines in the USA from 1996 to 2005. The author finds that there were no significant changes in the firm’s efficiency by an acquisition, and there is a weak evidence for efficiency improvements caused by the new shareholder. Besides, the author discovers that parent companies appear not to influence a subsidiary’s efficiency positively. In addition, the analysis shows a negative impact of a joint venture on technical efficiency of the pipeline company. To conclude, we are grateful to all the authors for their contribution, and all the reviewers for their constructive comments, which made this special issue possible. We hope that this issue would contribute significantly to performance improvement of the energy sector.

Simultaneous continuous recording of accommodation and pupil size using the modified Shin-Nippon SRW-5000 autorefractor

The internal optics of the recent models of the Shin-Nippon SRW-5000 autorefractor (also marketed as the Grand Seiko WV-500) have been modified by the manufacturer so that the infrared measurement ring has been replaced by pairs of horizontal and vertical infrared bars, on either side of fixation. The binocular, open field-of-view, allowing the accommodative state to be objectively monitored while a natural environment is viewed, has made the SRW-5000 a valuable tool in further understanding the nature of the oculomotor response. It is shown that the root-mean-square of model eye measures was least (0.017 ± 0.002D) when the separation of the horizontal measurement bars were averaged twice. The separation of the horizontal bars changes by 3.59 pixels/dioptre (r2 = 0.99), allowing continuous on-line analysis of the refractive state at up to 60 Hz temporal resolution to an accuracy of <0.001D, with pupils >3 mm. The pupil edge is not obscured in the diagonal axis by the measurement bars, unlike the ring of the original optics, so in the newer model pupil size can be measured simultaneously at the same rate with a resolution of <0.001 mm. The measurements of accommodation and pupil size are relatively unaffected by eccentricity of viewing up to ±10° from the visual axis and instrument focusing inaccuracies over a range of 10 mm towards the eye and 5 mm away from the eye. The resolution and temporal properties of the analysis are therefore ideal for the simultaneous measurement of dynamic accommodation and pupil responses. © 2004 The College of Optometrists.

Continuous recording of accommodation and pupil size using the Shin-Nippon SRW-5000 autorefractor

A newly released commercial autorefractor, the Shin-Nippon SRW-5000 (Japan), has been found to be valid compared to subjective refraction and repeatable over a wide prescription range. Its binocular open field-of-view allows the accommodative state to be monitored while a natural environment is viewed. In conventional static mode, the device can take up to 45 readings in 1min using digital image analysis of the reflected retinal image of a measurement ring. Continuous on-line analysis of the ring provides high (up to 60Hz) temporal resolution of the refractive state to an accuracy of <0.001D. Pupil size can also be analysed to a resolution of <0.001mm. The measurement of accommodation and pupil size was relatively unaffected by eccentricity of viewing up to ±10° and instrument focusing inaccuracies of ±5mm. The resolution properties of the analysis are shown to be ideal for measurement of dynamic accommodation and pupil responses. Copyright © 2001 The College of Optometrists.