Trends in development in the prawn fishing technique in India: a review

The paper provides some background information about the developments in the prawn fishing technique. The important indigenous gear for prawns are the filtering type nets like the stake nets, boat seines and beach seines with bag. The only indigenous net, which can be compared in design with the modern bottom trawling gear, is the "Thuri Valai" of the Madras Coast. Prawns have also been reported from the catches of gill nets and cast nets. Dredges and beam trawls are simplest among the dragged gear. Even though several earlier attempts were made with the beam trawl, in 1959 season a detailed experiment was made to study the fishing features of this gear. The subsequent experiments conducted were for comparison with otter trawl, towing of 2 beam trawls one behind the other and the use of tickler chain. The initial experiments with otter trawls were mainly directed towards operational aspects. The experiments were to evaluate the effectiveness of fully mechanised and partially mechanised operation, the effect of extra buoyancy of floats and the use of tickler chain. Subsequent developments had been on the structure and design of prawn trawling gear. Effect of long wings and sweeps were tested. Catches of nylon and cotton nets were compared. The sizes of meshes of the cod-end have also been increased.

Instrument for the measurement of the fore and aft tilt of otterboards

A portable self-contained instrument has been designed and developed for the measurement of the Fore and Aft tilt of otter boards within the range —22° to + 22° with an accuracy of ± 1°. An underwater transducer fitted on the otter board converts its tilt into corresponding electrical resistance which is measured in an ohmmeter on board, both being connected by electric cable.

Nursery rearing of Macrobrachium rosenbergii (de Man) using hapa-nets: effects of stocking density

An experiment was conducted in two phases for 45 days each to study the effects of six stocking densities (phase-I: 100, 200 and 300 PL/m² and phase-II: 250, 500 and 750 PL/m²) on growth and survival of Macrobrachium rosenbergii postlarvae (PL) in nylon hapa-nets (1.8m x 1.8m x 1.4m) installed in a pond. Stocking densities of 100, 200 and 300 PL 10/m² resulted in similar (P<0.05) body length (47-48 mm) and survival rate (84-88%), while body weight (0.62g) in PL with 300/m² was significantly lower than that (0.70g) in PL with 100 and 200/m². The growth (body length 47mm and weight 0.64g) and survival (84%) of PL stocked at 250 PL/m² density were significantly higher (P<0.05) than that of PL at 500 and 750/m². Besides the variation in growth and survival in PL at six tests stocking densities, a sharp increase in body weight of PL was observed beginning at the 4th week of rearing.

Underwater warp tension meter

A self-contained electronic solid-state instrument capable of measuring the tension between the different parts of a trawl net in operation, has been designed and developed for the measurement in the range 0 to 300 kg with an accuracy of ± 2 kg. The instrument is useful for measuring the resistance to motion of various accessories of a trawl net. It consists of an inductive type underwater tension transducer and an electronic indicating meter kept on board the vessel, both the units being connected by electric cable.

Lake Nabigaga: a field survey undertaken by the National Fisheries Resources Research Institute (NaFIRRI)

The field survey was undertaken by NaFIRRI technical staff. The terms of reference for the survey were to make an assessment of the lake for possible cage fish farming. The survey was undertaken on the 26 August 2010 by a team composed of the several. The lake supports small subsistence fishing activities by the local communities living around it. Information from the local community indicates that the fish species/types occurring in the lake include the Ngege, Nile perch, the African catfish and the lung fish. The fishing crafts in operation are largely Dug-out and Bao Tatu canoes and the main fishing gears are nylon and monofilament gillnets, hooks and beach seines.

Status of the beach seine fishery in the Hambantota District during 1995-97

Beach seine fishery is one of the oldest fishing methods practiced in Sri Lanka. In the recent past several modifications were observed in the structure of the net and the material used in the construction of nets. beach seine nets made of nylon material were also reported at 4 operating sites out of 17-beach seine landing centers in the Hambantota District. However, traditional beach seine nets made of coir and kuralon were the common nets used in the area. Fishing season extends from September to April of the following year. However, beach seining at Mawella was carried out throughout the year. The estimated average annual effort for the entire study area was about 4250 operations. The mean annual catch rate at Mawella, Kalametiya and Welipatanwila were estimated as 81.8, 290.7, and 167.3 kg/operation respectively. The mean annual catch rate for the entire study area was estimated as 157.3 kg/operation. The beach seines recorded an estimated annual production of 662mt in the Hambantota district. Stoleophorous sp. has made the major contribution to the beach seine catches and it was about 31.7% of the total beach seine production. Leiognathus sp. Carangids and Trichuras sp. have produced 11.5%, 9.5% and 8.5% respectively while Amblygaster sirm and other Sardinella sp. have produced 5.5% and 4.9% respectively. A sirm was found during the months of November, February, March and July. The size range of A. sirm caught by beach seine during February –March period was in the range of 5-12cm (total length). Contribution by Rastrelliger sp. and Sphyreana sp. were 2.9% and 2.6% by each category. Average income of a beach seine operation at Mawella, Kalametiya and Welipatanwila were Rs. 3330/=, 10250/= and 6222/= per operation respectively.

An experimental model of relay deployment planning tool for a wireless sensor network system to monitor civil engineering structures

It is essential to monitor deteriorated civil engineering structures cautiously to detect symptoms of their serious disruptions. A wireless sensor network can be an effective system for monitoring civil engineering structures. It is fast to deploy sensors especially in difficult-to-access areas, and it is extendable without any cable extensions. Since our target is to monitor deteriorations of civil engineering structures such as cracks at tunnel linings, most of the locations of sensors are known, and sensors are not required to move dynamically. Therefore, we focus on developing a deployment plan of a static network in order to reduce the value of a cost function such as initial installation cost and summation of communication distances of the network. The key issue of the deployment is the location of relays that forward sensing data from sensors to a data collection device called a gateway. In this paper, we propose a relay deployment-planning tool that can be used to design a wireless sensor network for monitoring civil engineering structures. For the planning tool, we formalize the model and implement a local search based algorithm to find a quasi-optimal solution. Our solution guarantees two routings from a sensor to a gateway, which can provide higher reliability of the network. We also show the application of our experimental tool to the actual environment in the London Underground.

Selectivity of gill nets for Hilsa toli and Pampus argentus

Fishing conducted off Saurashtra coast during 1971-74 with 27 units of nylon gill nets using 210/2/3, 210/3/3 and 210/4/3 twines with 51, 57 and 63 mm bar mesh and 0.70, 0 60 and 0.50 hanging coefficients have helped in standardizing an optimum gear for exploitation of commercial size group of Hilsa toli and Pampus argenteus. Gill nets of 210/2/3 with 51 mm bar mesh and 0.60 hanging coefficient for Hilsa toli and 210/2/3 with 63 mm bar and 0.60 hanging coefficient for Pampus argenteus are recommended for the commercial exploitation of these two species of fishes.

Seed production and culture techniques of Genetically Improved Farmed Tilapia (GIFT) in brackishwater environment

Effects of different levels of salinity on survival, growth and gonadal development of Genetically Improved Farmed Tilapia (GIFT) were studied under laboratory conditions in glass aquarium, for a period of ten weeks. The initial individual size of the GIFT was 20.23±4.45 and the salinity levels tested were 0, 5, 10, 15 and 20 ppt. The highest survival of 87.5% was found in 0 ppt and the lowest 60.5% in 20 ppt. Though the survival decreased progressively with increased salinity, there were no significant differences (P>0.05) among 0, 5, and 10 ppt. Similar to what has been observed in survival, the specific growth rate (SGR %/day) also decreased as of 1.30, 1.24, 1.08, 0.90 and 0.71, respectively, with the increased salinity of 0, 5, 10, 15 and 20 ppt. The gonadal development was highest in 0 ppt with a GSI value of 3.75 and lowest of 2.01 in 20 ppt. In the second experiment, gonadal development and seed production performance of GIFT in brackishwater condition were investigated for a period of three months. Each of the three fine meshed hapas of 20 square meters made from nylon net was placed in a freshwater (0 ppt) and in a brackish water (10-15 ppt) pond of the Brackishwater Station (BS). GIFT of 65 g average weight from a single cohort were stocked into three hapas at a rate of 2 per m. The male vs female ratio was 1:3. The development of gonad was faster with the higher gonadosomatic index (GSI %) of 3.85 % in freshwater condition than that of 2.73 % in brackish water. Within three months of the study period, a total of 70,510 and 44,250 GIFT fry were produced respectively, in freshwater and brackishwater conditions. Finally under third experiment, a participatory on-farm trial was carried out to evaluate the production performance of GIFT in monoculture and in polyculture with silver barb in coastal freshwater pond conditions. Nine ponds were selected for three treatment combinations of GIFT monoculture (T1), GIFT and silver barb polyculture (T2), and silver barb monoculture (T3). The ponds have been stocked in April, 05 at a density of 25,000 fry per ha. Fishes were fed with rice bran at the rate of 6% bw per day. In one month culture period, GIFT attained an average weight of 16.27 g in monoculture and 17.23 g in polyculture, against an average stocking weight of 0.37 g. Silver barb reached an average weight of 16.62 g in polyculture with GIFT and 10.01 g in monoculture, against an average stocking weight of 3.79 g.

Seismic behaviour of anchored quay walls with dry backfill

The seismic behaviour of anchored sheet pile walls is a complex soil-structure interaction problem. Damaged sheet pile walls are very expensive to repair and their seismic behaviour needs to be investigated in order to understand their possible mechanisms of failure. The research described in this paper involves both centrifuge testing and Finite Element (FE) analyses aimed at investigating the seismic behaviour of an anchored sheet pile wall in dry sand. The model wall is tied to the backfill with two tie rods connected to an anchor beam. The accelerations of the sheet pile wall, the anchor beam and the soil around the wall were measured using miniature piezoelectric accelerometers. The displacement at the tip of the wall was also measured. Stain gauges at five different locations on the wall were used to measure the bending moments induced in the the wall. The anchor forces in the tie rods were also measured using load cells. The results from the centrifuge tests were compared with 2-D, plane strain FE analyses conducted using DIANA-SWANDYNE II and the observed seismic behaviour was explained in the light of these findings. © 2011 Taylor & Francis.

The frequency response of dynamic friction: Model comparisons

Any linearised theory of the initiation of friction-excited vibration via instability of the state of steady sliding requires information about the dynamic friction force in the form of a frequency response function for sliding friction. Recent measurements of this function for an interface consisting of a nylon pin against a glass disc are used to probe the underlying constitutive law. Results are compared to linearised predictions from the simplest ratestate model of friction, and a ratetemperature model. In both cases the observed variation with frequency is not compatible with the model predictions, although there are some significant points of similarity. The most striking result relates to variation of the normal load: any theory embodying the Coulomb relation F∝N would predict behaviour entirely at variance with the measurements, even though the steady friction force obtained during the same measurements does follow the Coulomb law. © 2011 Elsevier Ltd. All rights reserved.

Observation on the lunar and tidal influence on gill netting in the Bay of Bengal

The effect of lunar and tidal influence on the landing of pelagic fish with drift gill nets has been studied for the first time from Bay of Bengal along the Orissa coast. The catchability of the gear was highest during the first quarter and lowest in the fourth quarter of the moon. The variation in catch rates during the four different quarters was not statistically significant. Contrary to the earlier belief, landing with gill net was not poor during the moonlit nights. The extensive use of bluish grey nylon twine matching with seawater in place of indigenous hemp or cotton twine, has largely eliminated the visibility of gear during the brighter phase of the moon. The rate of exploitation was found to be significantly higher during the nights of neap tide, compared to those of spring tide. A plausible explanation for this phenomenon has been offered.

On the optimum buoyancy-weight relation for a bottom trawl

Comparative fishing operations were carried out with 0.55; 0.75 and 1.00 buoyancy-weight relations of bottom trawl in order to find out the optimum relation. Two nets, 18.26 m. (60') two seam nylon and 16.16 m. (23') two seam cotton trawls, were used for the experiment. The results showed that the total catch per trawling hour with 0.75 B-W relation was 16.5% and 32.08% more than that with 0.55 and 1.00 B-W relation for nylon net used. A similar trend was noticed with cotton trawl also as the catch rate with 0.75 B-W relation was 13.89% and 25.78% more than that with 0.55 and 1.00 B-W relations. However, the analysis of catch composition indicated that the off bottom fishes like lactarius, upenoides sp., synagris sp. etc., were of more percentage with 1.00 B-W relation, near bottom fish like saurida, sciaenids etc., were more with 0.75 B-W relation, while the bottom fishes like soles, prawns, skates and rays etc., were more with 0.55 B-W relation.

Selectivity of gill nets for Scomberomorus commersoni

Selectivity of gill nets for S. commersoni was studied with nets made of 4 different mesh sizes fabricated with 4 different specifications of nylon twines. Fishing operations were conducted off Cochin through the fishing seasons 1968-72. The commercially significant size group of S. commersoni was found to fall in the length range of 850-950 mm. The optimum mesh size required for the capture of this group of S. commersoni was estimated as 76 mm. bar in nylon twine 210/12/3. The relationship between the twine size and mesh size was also worked out.

Development of electro-trawl system in marine environment

High voltage pulsed current produced on board a trawler is fed to electrodes distributed along the foot rope of a trawl net through two core TRS cable which builds up a homogeneous electrical field around the net mouth. By comparative fishing tests with the electrified and non-electrified 32 m long wing trawl net, the increase in total catch of shrimps and fishes was found to be 19.8 and 36%, respectively.