Evaluation of the propylene glycol association on some physical and chemical properties of mineral trioxide aggregate

Duarte MAH, Alves de Aguiar K, Zeferino MA, Vivan RR, Ordinola-Zapata R, Tanomaru-Filho M, Weckwerth PH, Kuga MC. Evaluation of the propylene glycol association on some physical and chemical properties of mineral trioxide aggregate. International Endodontic Journal, 45, 565570, 2012. Abstract Aim To evaluate the influence of propylene glycol (PG) on the flowability, setting time, pH and calcium ion release of mineral trioxide aggregate (MTA). Methodology Mineral trioxide aggregate was mixed with different proportions of PG, as follows: group 1: MTA + 100% distilled water (DW); group 2: MTA + 80% DW and 20% PG; group 3: MTA + 50% DW and 50% PG; group 4: MTA + 20% DW and 80% PG; group 5: MTA + 100% PG. The ANSI/ADA No. 57 was followed for evaluating the flowability and the setting time was measured by using ASTM C266-08. For pH and calcium release analyses, 50 acrylic teeth with root-end cavities were filled with the materials (n = 10) and individually immersed in flasks containing 10 mL deionized water. After 3 h, 24 h, 72 h and 168 h, teeth were placed in new flasks and the water in which each specimen was immersed had its pH determined by a pH metre and the calcium release measured by an atomic absorption spectrophotometer with a calcium-specific hollow cathode lamp. Data were analysed by using one-way anova test for global comparison and by using Tukeys test for individual comparisons. Results The highest value of flowability was observed with MTA + 20% DW and 80% PG and the lowest values were found with MTA + 100% DW. They were significantly different compared to the other groups (P < 0.05). The presence of PG did not affect the pH and calcium release. The MTA + 100% PG favoured the highest (P < 0.05) pH and calcium release after 3 h. Increasing the PG proportion interfered (P < 0.05) with the setting time; when used at the volume of 100% setting did not occur. Conclusion The addition of PG to MTA-Angelus increased its setting time, improved flowability and increased the pH and calcium ion release during the initial post-mixing periods. The ratio of 80% DW 20% PG is recommended.

Evaluation of pH and Calcium Ion Release of Root-end Filling Materials Containing Calcium Hydroxide or Mineral Trioxide Aggregate

Introduction: To evaluate calcium ion release and pH of Sealer 26 (S26) (Dentsply, Rio de Janeiro, RJ, Brazil), white mineral trioxide aggregate (MTA), Endo CPM Sealer (CPM1) (EGEO SRL Bajo licencia MTM Argentina SA, Buenos Aires, Argentina), Endo CPM Sealer in a thicker consistency (CPM 2), and zinc oxide and eugenol cement (ZOE). Methods: Material samples (n = 10) were placed in polyethylene tubes and immersed in 10 mL of distilled water. After 3, 6,12,24, and 48 hours and 7,14, and 28 days, the water pH was determined with a pH meter, and calcium release was assessed by atomic absorption spectrophotometry. An empty tube was used as the control group. Results: The control group presented a pH value of 6.9 at all studied periods and did not show the presence of calcium ion. S26 presented greater hydroxyl ion release up to 12 hours (p < 0.05). From 24 hours until 28 days, S26, MTA, CPM1, and CPM2 had similar results. in ail periods, ZOE presented the lowest hydroxyl ion release. CPM1, followed by CPM2, released the most calcium ions until 24 hours (p < 0.05). Between 48 hours and 7 days, CPM1 and CPM2 had the highest release. A greater calcium ion release was observed for CPM2, followed by CPM1 at 14 days and for S26, CPM1, and CPM2 at 28 days. ZOE released the least calcium ions in all periods. Conclusion: Sealer 26, MTA, and Endo CPM sealer at normal or thicker consistency release hydroxyl and calcium ions. Endo CPM sealer may be an alternative as root-end filling material. (J Endod 2009;35:1418-1421)

The Influence of Calcium Chloride on the Setting Time, Solubility, Disintegration, and pH of Mineral Trioxide Aggregate and White Portland Cement with a Radiopacifier

This study evaluated the influence of addition of 10% calcium chloride (CaCl(2)) on the setting time, solubility, disintegration, and pH of white MTA (WMTA) and white Portland cement (WPC). A test of the setting time was performed following the #57 ADA specifications and a test of the final setting time according to the ASTM. For the solubility tests disintegration and pH, Teflon rings were filled with the cements and weighed after setting. After 24 h in a desiccator, they were once again weighed. Thereafter, they were immersed in MiliQ water for 24 and 72 h and 7, 14, and 28 days, with maintenance in the desiccator and weighing between periods. The pH of water in which the rings were immersed was measured immediately after contact with them and in the other periods. The addition of CaCl(2) provided a significant reduction (50%) in the initial setting time of cements. The final setting time of WMTA was reduced in 35.5% and the final setting time of WPC in 68.5%. The WMTA with CaCl(2) absorbed water and gained weight with time, except for in the 24-h period. The addition of CaCl(2) to the WPC reduced its solubility. The addition of CaCl(2) increased the pH of WMTA in the immediate period and at 24 and 72 h and for WPC in the immediate period and at 24 h. The addition of CaCl(2) to WMTA and WPC reduced the setting times and solubility of both and increased the pH of cements in the initial periods. (J Endod 2009;35:550-554)

Efeito do estresse mineral induzido por fontes e doses de potássio na produção de raízes em plantas de berinjela (Solanum melongena L.)

This study was carried out at the Department of Plant Production, Sector Horticulture, São Paulo State University-UNESP, Botucatu Campus, São Paulo State, Brazil in order to evaluate the effect of sources and increasing doses of potassium in roots of eggplant. The experimental design was randomized blocks in factorial scheme 2 x 4 (two sources of potassium: KCl and K(2)SO(4) and four doses of K(2)O, 250, 500, 750 and 1000 kg ha(-1)) and three replications. For the experiment, we used Oxisol medium texture (615 g of sand, 45 g of silt and 340 g of clay per kg soil). The soil passed through sieve of 5 mm and packed in plastic pots with a capacity of 32 liters of soil where plants were grown. The pots were distributed with a spacing of 0,63 m between plants and 1,0 m between rows each pot being grown with a plant. The evaluated characteristics were: root dry mass and volume of the root. It was concluded that sources and excessive doses of mineral K(2)O induces stress in eggplants and affect the roots being less harmful K(2)SO(4) source.

Influence of the mineral content of the seston on tropical cladocerans of a marginal lake.

Bioassays were carried out seasonally to evaluate individual growth and reproduction of cladocerans, from a marginal lake, with the addition of nitrogen (N), phosphorus (P), and both N and P to natural seston; Methods: Cohorts originated from cultivated females were submitted to the following treatments: 1) lake seston, 2) lake seston + P, 3) lake seston + N, and 4) lake seston + NP; Results: The sestonic C:P and C:N molar ratios were always high and limiting, according to threshold ratios estimated for temperate lakes. P addition to seston enhanced the growth rates of one species, D. birgei. A significant higher growth rate of B. longirostris was found in the seston enriched with N compared to natural seston, as well as a higher fecundity of M. minuta. The fecundity of D. birgei was significantly higher in the seston enriched with both N and P. C, N, and P body content of cladocerans was similar to that of temperate counterparts; Conclusion: Energy limitation related to carbon content or food quality seems to be most important in controlling cladocerans' populations in the lake than food mineral content.

Effects of temperature, sestonic algae features, and seston mineral content on cladocerans of a tropical lake

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Characterization of mineral contents on androgen deficient and chronic ethanol consuming rats by biochemistry and non-destructive techniques

Ethanol can compromise the body mineral composition and affect bone, and when associated to hypogonadism is considered an important risk factor for osteoporosis in man. The aim of this study was to investigate the effect of androgen deficient and chronic ethanol consuming on mineral contents by biochemistry and non-destructive techniques. Wistar rat (n=54) were divided in orchiectomy (ORQ) or SHAM-operated and subdivided by diet. They were daily fed with a Lieber DeCarli diet model for 8 weeks long. The controls groups were free-diet and pair-fed. Ca and P were analyzed by biochemistry test in the blood and by nX-ray fluorescence and FT-Raman on the femur area. Serum analysis revealed hypocalcaemia and hypeiphosphataemia in ethanol groups more than pair-fed and free-diet. In similarity, spectroscopy indicated a decrease in bone Ca content in ORQ groups, mainly for ethanol groups. Phosphorus content and Ca/P molar ratio, otherwise, doesn't diverge in all 6 groups. Ethanol consumption impaired Ca and P homeostasis in ORQ rat more than SHAM. The relationships among ethanol consume and androgen deficit support the hypothesis that ethanol affects the mineral-regulating hormones and may mediate some effects on bone. These findings demonstrate that ethanol seemed to interfere with the normal compensatory response to these Ca and P levels and is more significant M androgen deficiency rats.

In vitro evaluation of apical sealing in root apex treated with demineralization agents and retrofiled with mineral trioxide aggregate through marginal dye leakage

O objetivo deste estudo foi avaliar o selamento de ápices radiculares tratados com diferentes agentes desmineralizantes e retrobturados com agregado de trióxido mineral (MTA), mediante infiltração marginal por corante. Cinqüenta e seis dentes unirradiculares humanos extraídos foram instrumentados, obturados e seccionados apicalmente. Os preparos cavitários apicais foram confeccionados com pontas ultra-sônicas e os agentes desmineralizantes foram aplicados previamente à retrobturação com Pro Root MTA. Os espécimes foram divididos aleatoriamente em 4 grupos (n=14): grupo 1 (sem agente desmineralizante); grupo 2 (ácido fosfórico 35% durante 15 s); grupo 3 (solução de EDTA 17%, pH 7, durante 3 min); grupo 4 (gel de EDTA 24%, pH 7, durante 4 min). A extensão da infiltração de corante (rodamina B 2% a 37°C, por 24 h) foi avaliada em milímetros utilizando-se um estereomicroscópio. Os resultados foram analisados estatisticamente por meio de análise de variância a um critério e do teste Tukey com nível de significância de 5%. Dentre os grupos experimentais, a menor extensão de infiltração do corante foi verificada no grupo 1 (1,89 mm), seguido pelos grupos 2 (2,18 mm), 4 (2,54 mm) e 3 (2,64 mm). Não houve diferenças estatisticamente significante (p>0.05) na infiltração marginal pelo corante entre os grupos 1, 2 e 4 e os grupos 2, 3 e 4. Com base nos resultados obtidos, pode-se concluir que a aplicação de agentes desmineralizantes não pode ser recomendada quando da utilização do MTA em cirurgias parendodônticas.

Cytotoxicity and Genotoxicity of Root Canal Sealers Based on Mineral Trioxide Aggregate

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Composition-resolved size distributions of volcanic aerosols in the Mt. Etna plumes

Particle size distributions for soluble and insoluble species in Mt. Etna's summit plumes were measured across an extended size range (10 nm < d < 100 mu m) using a combination of techniques. Automated scanning electron microscopy (QEMSCAN) was used to chemically analyze many thousands of insoluble particles (collected on pumped filters) allowing the relationships between particle size, shape, and composition to be investigated. The size distribution of fine silicate particles (d < 10 mu m) was found to be lognormal, consistent with formation by bursting of gas bubbles at the surface of the magma. The compositions of fine silicate particles were found to vary between magmatic and nearly pure silica; this is consistent with depletion of metal ions by reactions in the acidic environment of the gas plume and vent. Measurements of the size, shape and composition of fine silicate particles may potentially offer insights into preemission, synemission, and postemission processes. The mass flux of fine silicate particles from Mt. Etna released during noneruptive volcanic degassing in 2004 and 2005 was estimated to be similar to 7000 kg d(-1). Analysis of particles in the range 0.1 < d/mu m < 100 by ion chromatography shows that there are persistent differences in the size distributions of sulfate aerosols between the two main summit plumes. Analysis of particles in the range 0.01 mu m < d < 0.1 mu m by scanning transmission electron microscopy (STEM) shows that there are significant levels of nanoparticles in the Mt. Etna plumes although their compositions remain uncertain.

Exploring potentialities of the HR-CS FAAS technique in the determination of Ni and Pb in mineral waters

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudos sobre a nutrição mineral do cafeeiro: XXXI. influêcia do cobre do substrato no crescimento e composição mineral do cafeeiro (Coffea arabica L.) variedades Mundo Novo e Catuaí

Foi estudado o efeito do cobre do substrato no crescimento, sintomatologia e composição mineral do cafeeiro novo. Verificou-se ser a var. Mundo Novo mais sensível à toxidez do cobre por translocar maior proporção do elemento que a var. Catuaí. O uso de calcário e de matéria orgânica no solo neutraliza o sobre tóxico.

Estudos sobre a nutrição mineral do sorgo granífero, VII - efeitos do nitrogênio

Foi conduzido um experimento em casa de vegetação, onde foram estudados os efeitos de N sobre o crescimento e absorção de nutrientes pelo sorgo granífero. As plantas foram cultivadas em solução nutritiva completa ou com nitrogênio diluída a 1/2, 1/5 e 1/10 da concentração usual, e foram colhidas aos 110 dias da emergência, quando foram separadas em raiz, colmo, folhas, raquis e grãos. O material foi secado, moido e foram feitas análises de nitrogênio, fósforo e potássio. Os resultados obtidos permitiram concluir que os níveis de nitrogênio utilizados tiveram efeitos nas produções de matéria seca das plantas, assim como nas quantidades de nitrogênio, fósforo e potássio absorvidas. As cultivares apresertaram reações diferentes aos níveis de nitrogênio.

Estudos sobre a nutrição mineral do sorgo granífero: VIII. efeitos do fósforo

Foi conduzido um experimento, onde foram estudados os efeitos de níveis crescentes de fósforo sobre o crescimento, produção e absorção de nitrogênio, fósforo e potássio por cinco cultivares de sorgo granífero. As plantas foram cultivadas em baldes com 20 litros de solução nutritiva completa ou com fósforo diluído a 1/2, 1/5 e 1/10 da concentração usual. A colheita foi realizada quando as plantas estavam com os grãos maduros, aos 110 dias da emergência. As plantas colhidas foram separadas em raiz, colmo, folhas, raquis e grãos, sendo então secadas e moídas para as análises químicas de nitrogênio, fósforo e potássio. Os resultados obtidos permitiram concluir que, em média, apesar dos níveis de fósforo não afetarem significativamente a produção de matéria seca total, as produções de grãos foram diminuídas nos tratamentos com menos disponibilidade de fósforo, sendo que os diferentes cultivares apresentaram reações diferentes à deficiência do nutriente. Os níveis de fósforo na solução nutritiva tiveram efeito nas quantidades de nitrogênio e fósforo contidos na planta e nos grãos de sorgo granífero, não acontecendo o mesmo em relação a absorção de potássio pela planta. Ainda: os níveis de fósforo tiveram efeito na quantidade de potássio contido nos grãos de sorgo.

Nutrição mineral do mamoeiro: I. Curva de crescimento do mamoeiro (Carica papaya L.) em condições de campo

No município de Botucatu, SP, em um solo pertencente ao grande grupo Terra Roxa Estruturada, instalou-se um ensaio com o objetivo de se determinar a curva de crescimento do mamoeiro (Carica papaya L.). O delineamento estatístico utilizado foi o inteiramente casualizado, com quatro repetições. As amostragens foram realizadas em intervalos mensais a partir do quarto ao décimo segundo mês após o plantio das mudas no campo. Cada amostra era composta de uma planta, onde se determinava: os pesos das matérias fresca e seca do caule, folhas e flores mais frutos, comprimento de diâmetro do caule a 10 cm do solo. Dentre outras observações, constatou-se que apesar das variações climáticas durante o primeiro ano de cultivo, o acumulo de matéria seca pela parte aérea total foi crescente e contínua.