Evaluation of the Atibaia River water quality using Lecane bulla as a test organism

In view of the diversity of environments found in the Brazilian territory, it is understandable that the use of native species can provide more relevant information for ecotoxicological studies. The purpose of this work was to evaluate the quality of water samples from the Atibaia River in an area that is under the influence of petroleum refinery using a native test-organism and submitting the data to PCA statistical analysis. Therefore, acute toxicity assays with Lecane bulla (Rotifera) were performed in four locations of the river, as well as physical-chemical analyses. Sampling was drawn in the dry and rainy seasons. The bioassays were static and lasted 48 hours; dead organisms were quantified at the end of the tests. Toxicological differences among the samples/per location and control were compared by means of the Analysis of Variance. Physical-chemical and mortality variables were simultaneously analyzed by multivariate analysis of the principal components and the Pearson correlation coefficient. Water samples from the exit of the refinery stabilization pond (location S.1) were toxic to L. bulla in both seasons, with significant differences in relation to the control and between the seasons. The statistical treatment of data showed that mortality was strong and positively correlated with total hardness, chlorides and EC, which together with pH presented higher values in location S.1, in the dry and in the rainy seasons. Due to its sensibility to the quality of the Atibaia river water samples, the potential use of L. bulla for ecotoxicological studies as an alternative test organism could be demonstrated.

Tratamento térmico de filmes supercondutores do sistema BSCCO utilizando forno de micro-ondas doméstico

Pós-graduação em Ciência dos Materiais - FEIS

Propriedades físico-química e antibacteriana de medicações intracanal a base de hidróxido de cálcio e óxido de zinco micro e nanoparticulados

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Impacto da energia de micro-ondas na sinterização da zircônia odontológica

Pós-graduação em Odontologia Restauradora - ICT

Avaliação térmica e estrutural do bagaço de cana de açúcar pré-tratado com ozônio, ultrassom e micro-ondas para produção de etanol celulósico por hidrólise enzimática

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Do micro ao macro: aproximações entre oriente e ocidente em Der Jahreslauf

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo de propriedades da resina acrílica termoativada por energia de micro-ondas frente às variações nos procedimentos de inclusão

On heat cured acrylic resins by microwaves energy the action of electromagnetic waves on methylmethacrylate promote the polymerization process. However, part of this energy is absorbed by the gypsum present in the flask and the function of this gypsum is to maintain the characteristics of specimen, nevertheless is unknown in the literature as the amount of water present in this gypsum affects the characteristics of acrylic resin. The proposal of this study was verified if dried gypsum influenced in some properties of the acrylic resins thermally activated by microwaves: presence of porosity, microhardness, roughness, flexural strength and dimensional change. Two different types of acrylic resin for complete denture were utilized: Lucitone 550 e Vipi-Wave and groups were formed: Lucitone 550, polymerization by microwave energy without gypsum treatment; Lucitone 550, polymerization by microwave energy with pretreatment gypsum; Vipi-Wave by microwave energy without gypsum treatment; Vipi Wave, polymerization by microwave energy with pretreatment gypsum; Lucitone 550 control group polymerization in hot water bath. For both situations were performed analysis of microhardness and porosity three different metallic shaped specimens were formed with followed dimensions: 2,0x2,0x2,0cm (8cm3); 2,0x2,0x1,0 (4cm3) e 2,0x2,0x0,5 (2cm3). Standardized wax specimens was used to prepare groups (n=9) and included in glass fiber flasks. The gypsum dry was made by microwave oven cycle (10min and 600W) and then the flasks were maintained in dry oven during two hours. Polymerizations of specimens were made and then polished. Wax patterns #7 obtained from the metal were embedded in plastic flask and following the processes of pressing and polymerization of the resin according to established groups. To evaluate the flexural strength, specimens 65mm x 10mm x 3.0mm from metallic patterns in bar format were made. ...

Application of Micro-Raman Spectroscopy to the Study of Yttria-Stabilized Tetragonal Zirconia Polycrystal (Y-TZP) Phase Transformation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Energetic exploitation from a hybrid PV-wind power micro-generation rural electrification

Hybrid system micro-generation integration of PV-wind power is presented by a form of energy in which problems resulting from variability in the intensity of wind and solar intensity are possible mitigation either by complementation between one source to another or the largest stability configured by the generate the system. Based on this context, this work aims to assessing the performance of a hybrid system PV-wind power energy small of a rural property for their electrification. The study has been developed at the Rural Laboratory Powering from Engineering Department of UNESP. In order to present this research, a hybrid system has been installed PV-wind power, composed of one 400Wp windmill and a 300 Wp PV-system. The results obtained allowed us to evaluate the solar and wind energy supplied ranked among 285 and 360 kWh electric power generated by the PV-wind power hybrid system stood between 25,5 and 31 kWh. At is to say achieving yield of approximately than 10% during one year observation period, i.e., it was concluded that the performance of the hybrid system depended essentially the energy received and generated by the PV-system and that there was complementation between generating wind power and PV-systems with regard to time of day and the annual seasons by confirming the technical feasibility of this kind system of micro-generation in small rural properties.

Induction of luteolysis in mares utilizing a micro-dose of prostaglandin F-2 alpha in the sacral lumbar space

An experiment was conducted to examine the luteolytic effectiveness of using low or micro doses of PGF2α when administered at the BAI HUI acupuncture point, which is frequently used to treat ovarian disturbances in veterinary acupuncture. The results indicate that PGF2α given at a very low micro dose of 0.5 mg (one tenth the conventional recommended dose) administered at the BAI HUI acupuncture point located at the sacral lumbar space is equally effective at inducing luteolysis in mid-luteal phase mares as conventional PGF2α i.m. treatment using a tenfold higher dose. Therefore, based on the results of the present study, we suggest that the BAI HUI sacrai lumbar route somehow provides an extremely efficient pathway for the drug to the ovarian level.

Zirconia-based dental crown to support a removable partial denture: a three-dimensional finite element analysis using contact elements and micro-CT data

Veneer fracture is the most common complication in zirconia-based restorations. The aim of this study was to evaluate the mechanical behavior of a zirconia-based crown in a lower canine tooth supporting removable partial denture (RPD) prosthesis, varying the bond quality of the veneer/coping interface. Microtomography (μCT) data of an extracted left lower canine were used to build the finite element model (M) varying the core material (gold core - MAu; zirconia core - MZi) and the quality of the veneer/core interface (complete bonded - MZi; incomplete bonded - MZi-NL). The incomplete bonding condition was only applied for zirconia coping by using contact elements (Target/Contact) with 0.3 frictional coefficients. Stress fields were obtained using Ansys Workbench 10.0. The loading condition (L = 1 N) was vertically applied at the base of the RPD prosthesis metallic support towards the dental apex. Maximum principal (σmax) and von Mises equivalent (σvM) stresses were obtained. The σmax (MPa) for the bonded condition was similar between gold and zirconia cores (MAu, 0.42; MZi, 0.40). The incomplete bonded condition (MZi-NL) raised σmax in the veneer up to 800% (3.23 MPa) in contrast to the bonded condition. The peak of σvM increased up to 270% in the MZi-NL. The incomplete bond condition increasing the stress in the veneer/zirconia interface.

Osteoblast differentiation is enhanced by a nano-to-micro hybrid titanium surface created by Yb:YAG laser irradiation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise do potencial de micro-organismos dos gêneros Lectthophora e Cryptococcus para a produção de biocumbustíveis

A busca de novas fontes de energia tem sido estimulada pela demanda crescente do mercado e o bioetanol é uma alternativa promissora para esta questão. A produção de etanol a partir de resíduos agroindustriais lignocelulósicos está sendo pesquisada em vários laboratórios do Brasil e do exterior. Os resíduos da agroindústria são formados, em grande parte, por fibra vegetal lignocelulósica, a qual é altamente resistente à degradação, dificultando a conversão dos componentes a monossacarídeos fermentescíveis. Desta forma, a prospecção de micro-organismos que viabilizem a conversão de material lignocelulósico em etanol tem aumentado consideravelmente. Sendo assim, o estudo de micro-organismos associados às formigas cortadeiras, os quais são adaptados ao uso da biomassa lignocelulolítica, pode ser promissor para a descoberta de enzimas adequadas à degradação eficiente da fibra vegetal, podendo significar um passo adiante na produção do etanol de segunda geração. Neste trabalho analisamos a ação hidrolítica e a liberação de açúcares fermentescíveis por fungos dimórficos do gênero Lecythophora e de leveduras do gênero Cryptococcus sobre o material lignocelulósico. A metodologia empregada consistiu na inoculação das linhagens em diferentes resíduos da agroindústria, como bagaço de cana-de-açúcar, casca de café, casca de arroz e sabugo de milho triturado, seguida da quantificação dos açúcares redutores liberados, bem como da produção de enzimas hidrolíticas extracelulares, como endoamilase, exoamilase, pectinase, endoglucanase, exoglucanase e xilanase. O gênero Lecythophora mostrou-se melhor produtor enzimático quando comparado com o gênero Cryptococcus, ambos em meio suplementado com bagaço de cana-de-açúcar. Ainda, foi realizado o inóculo de culturas mistas das melhores linhagens pertencentes ao gênero Lecythophora. A produção enzimática constatada indicou o potencial das linhagens...

Ferramenta computacional para identificação de micro-organismos com base em assinaturas genômicas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Thermodynamic, Economic and Emissions Analysis of a Micro Gas Turbine Cogeneration System operating on Biofuels

Pós-graduação em Engenharia Mecânica - FEG