The BACTEC MGIT(tm) 320 system as a laboratory tool to diagnose tuberculosis in a Brazilian hospital with a high prevalence of HIV infection

Abstract: INTRODUCTION: The World Health Organization endorses the BACTEC Mycobacterial Growth Indicator Tube (MGIT)(tm) system as a rapid, sensitive, and specific method to diagnostic of tuberculosis. Here, we compared the performance of this system against Ogawa-Kudoh cultures and microscopy. METHODS: A total of 927 samples were obtained between December 2011 and December 2013 from 652 cases of suspected tuberculosis at the School Hospital of the Federal University of Rio Grande in Brazil. RESULTS: The MGIT system confirmed tuberculosis in more cases in less time. CONCLUSIONS: The MGIT system is an effective tool for early diagnosis of tuberculosis, especially in patients with HIV/AIDS.

Aplicação do CRM no contexto do bloco operatório

RESUMO - Introdução: Na última década, inúmera literatura sobre temas de saúde, principalmente abordando a Segurança do Doente, foca a necessidade e a importância do conceito de trabalho em equipa e da sua implementação na atividade dos profissionais de saúde. É também referido, como exemplo a seguir, por analogia e com a devida adaptação, o conceito e a metodologia do Crew Resource Management (CRM) da aviação civil, em que vários autores reviram a evidência da sua aplicação à medicina e concluíram que era uma ferramenta útil em formação não-técnica para a prática da cirurgia segura. Porquê esta analogia entre a saúde e a aviação civil? Porquê este despertar na saúde para o trabalho em equipa e, principalmente, baseando-se na metodologia do CRM da aviação civil? Qual a importância da formação não-técnica e como pode esta ser adaptada à atividade dos profissionais da saúde, nomeadamente no bloco operatório? São estas as principais questões que irão ser investigadas e analisadas ao longo deste estudo. Objetivos: Na aviação civil, a segurança é uma das prioridades desta indústria e um dos pilares da sua sustentabilidade. Sendo a indústria da aviação civil, como a saúde, uma atividade complexa importa em primeiro lugar compreender como a segurança deve ser abordada nas organizações complexas. Depois de compreendermos os quatro pilares da segurança (política, risco, garantia e promoção) aplicados na aviação civil, analisaremos a necessidade da formação não-técnica, explicando a importância da metodologia do CRM na aviação civil e a possibilidade da “importação” dos seus conceitos pela saúde. Metodologia: Para aferirmos a necessidade de formação não-técnica pelos profissionais da saúde foi desenvolvido um inquérito aos alunos finalistas dos Cursos de Enfermagem e dos Cursos de Medicina e outro inquérito a profissionais da saúde, Enfermeiros e Médicos (Anestesista e Cirurgião) com funções no Bloco Operatório, para responderem às seguintes inquietações:  Tiveram os profissionais de saúde formação formal na sua licenciatura ou pós-graduação em temas sobre comunicação, trabalho em equipa, gestão do erro, gestão do stress, liderança, atitudes e comportamentos para um trabalho em equipa eficiente e seguro?  Tiveram formação inicial no início da sua carreira e formação recorrente equivalente sobre estes temas ao longo da sua carreira?  Estão os profissionais de saúde preparados, com conhecimentos obtidos em formação formal, para trabalhar em equipa? Pretendeu-se igualmente, através de inquérito, saber se os alunos finalistas das licenciaturas acima identificadas consideram importante para a sua futura atividade como profissionais de saúde possuírem competências não-técnicas para o trabalho em equipa para evitarem os eventos adversos. No referido inquérito será também questionado quais as matérias a abordar nas licenciaturas (ou em outra etapa da formação), consideradas necessárias para se obterem competências de trabalho em equipa e qual a opinião sobre a frequência da formação recorrente sobre estes temas. Conclusão: O trabalho ficará concluído com uma proposta de conteúdos programáticos para a formação não-técnica dos profissionais de saúde, para a sua formação inicial e para a formação recorrente ao longo da carreira, baseada na metodologia do CRM da aviação civil. Objetivo final: Como objetivo final do estudo pretende-se contribuir, através da aplicação de formação não-técnicas aos profissionais de saúde, para a melhoria da Segurança do Doente nos cuidados em saúde.

Phage display as a tool for generation of bio-therapeutic agents for breast cancer

Notch is a conserved signalling pathway, which plays a crucial role in a multiple cellular processes such as stem cell self-renewal, cell division, proliferation and apoptosis. In mammalian, four Notch receptors and five ligands are described, where interaction is achieved through their extracellular domains, leading to a transcription activation of different target genes. Increased expression of Notch ligands has been detected in several types of cancer, including breast cancer suggesting that these proteins represent possible therapeutic targets. The goal of this work was to generate quality protein targets and, by phage display technology, select function-blocking antibodies specific for Notch ligands. Phage display is a powerful technique that allows the generation of highly specific antibodies to be used for therapeutics, and it has also proved to be a reliable approach in identifying and validating new cancer-related targets. Also, we aimed at solving the tri-dimensional structure of the Notch ligands alone and in complex with selected antibodies. In this work, the initial phase focused on the optimization of the expression and purification of a human Delta-like 1 ligand mutant construct (hDLL1-DE3), by refolding from E. coli inclusion bodies. To confirm the biological activity of the produced recombinant protein cellular functional studies were performed, revealing that treatment with hDLL1-DE3 protein led to a modulation of Notch target genes. In a second stage of this study, Antibody fragments (Fabs) specific for hDLL1-DE3 were generated by phage display, using the produced protein as target, in which one good Fab candidate was selected to determine the best expression conditions. In parallel, multiple crystallization conditions were tested with hDLL1-DE3, but so far none led to positive results.

Machine diagnosis based on artificial immune systems

Nowadays, many of the manufactory and industrial system has a diagnosis system on top of it, responsible for ensuring the lifetime of the system itself. It achieves this by performing both diagnosis and error recovery procedures in real production time, on each of the individual parts of the system. There are many paradigms currently being used for diagnosis. However, they still fail to answer all the requirements imposed by the enterprises making it necessary for a different approach to take place. This happens mostly on the error recovery paradigms since the great diversity that is nowadays present in the industrial environment makes it highly unlikely for every single error to be fixed under a real time, no production stop, perspective. This work proposes a still relatively unknown paradigm to manufactory. The Artificial Immune Systems (AIS), which relies on bio-inspired algorithms, comes as a valid alternative to the ones currently being used. The proposed work is a multi-agent architecture that establishes the Artificial Immune Systems, based on bio-inspired algorithms. The main goal of this architecture is to solve for a resolution to the error currently detected by the system. The proposed architecture was tested using two different simulation environment, each meant to prove different points of views, using different tests. These tests will determine if, as the research suggests, this paradigm is a promising alternative for the industrial environment. It will also define what should be done to improve the current architecture and if it should be applied in a decentralised system.

IPO impact on industry incumbents

The creation of an innovative company is suggestive of change in an industry. To test that change this paper tests the impact of IPOs on industry incumbents. IPOs are found to happen in industries that exhibited positive abnormal returns for up to 5 years before the IPO date. The IPO date is found to coincide with the end of that industry abnormal return profile. This paper suggests this evidence is consistent with the IPO acting as mechanism of enforcing market efficiency at the industry level.

East African Breweries LTD Alcoholic beverages industry

Equity research report

Growth strategies in tourism entertainment industry - a pratical application-

In the past few years, prompted by the globalization and the quality and ease of travel, the world has witnessed a boom in the tourism sector. The forecast is that this tendency will continue in the upcoming years, representing a set of opportunities for companies operating in this business area. Boost Tourism operates in the tourism entertainment industry. Its revenues growth has been exponential so the founders decided that it was time to take it to new heights. This Work Project aims to study three alternative growth strategies and, based on a comprehensive analysis of the industry and the market, provide recommendations to outline the optimal expansion path.

The hospitality industry

This study of independent Portuguese hotels‘ positioning strategies regarding adopting, or not, a soft brand affiliation seeks to determine what motivates this choice. Surveyed hotels were asked to enunciate the benefits and disadvantages associated with their strategic decision, and other difficulties experienced in their business. The results indicate that international brand awareness and the hotel owners‘ long-term goals are the core factors affecting the choice. In practice, we conclude that there isn‘t a ‗one size fits all‘ strategy. Nevertheless, affiliated hotels experience an operational advantage over non-affiliated ones stemming from the affiliating organization‘s accumulated experience in sales, distribution channels and marketing resources.

The relationship between liquidity and profitability in the food & beverage industry evidence from Europe and United States

This Work Project clarifies the relationship between liquidity and profitability based on a sample in the Food & Beverage (F&B) industry, and comparing the largest European and United States companies. The research concludes that liquidity, proxied by current ratio or quick ratio, correlates with return on assets taken as the measure of profitability, and so does the cash conversion cycle and its components. Moreover, company size correlates with liquidity, and indirectly affects ROA. This research contributes and addresses to managers in the F&B industry and recommends how they should act in order to improve profitability in the industry.

Characterization of the clients retention in the tlecommunications companies

The ability of a company to be able to do a precisely churn prediction, so it can act on it, is paramount. For this reason, Deloitte addressed me the challenge of characterizing the client’s retention in the telecom companies. To do so, it was created a comprehensive tool that enables Deloitte to evaluate the churn management maturity level of a telecom operator and highlight its strengths and weaknesses. The development of this matrix was based on a depth churn research, a market research based on 40 interviews and 2 focus group and the valuable feedback from Deloitte consultants.

Return on assets in the Tobacco Industry analysis of the four main Tobacco Manufacturers

This paper studies operating profitability drivers in the Four Main Tobacco Manufacturers for the period 2004-2014. The operating profitability is analyzed as return on assets (ROA) based on the DuPont Extended Model breakdown in degree of operational risk, gross sales margin and assets turnover. The sources of ROA are market share and price strategies appraised through the drivers: firm-size, global value and strategic choices. Using consolidated data, results suggest that firm-size and global value holds a positive relationship with ROA. Also innovation through less harmful tobacco products can lead to better ROA despite no correlation between R&D and ROA.

Improving Millennium Bank's personal finance manager

Double Degree

Ontology-based representation and generation of workflows for micro-task human-machine computation

Doctoral Program in Computer Science

Project management: evaluation of the problems in the portuguese construction industry

During recent decades it has been possible to identify several problems in construction industry project management, related with to systematic failures in terms of fulfilling its schedule, cost and quality targets, which highlight a need for an evaluation of the factors that may cause these failures. Therefore, it is important to understand how project managers plan the projects, so that the performance and the results can be improved. However, it is important to understand if other areas beyond cost and time management that are mentioned on several studies as the most critical areas, receive the necessary attention from construction project managers. Despite the cost and time are the most sensitive areas/fields, there are several other factors that may lead to project failure. This study aims at understand the reasons that may cause the deviation in terms of cost, time and quality, from the project management point of view, looking at the knowledge areas mentioned by PMI (Project Management Institute).