Bandgap voltage reference with low susceptibility to electromagnetic interference (EMI)

In this paper, the susceptibility of a current-mode bandgap voltage reference to electromagnetic interference (EMI) superimposed to the power supply is investigated by simulation. Designed for AMS 0.35 CMOS process, the circuit provides a stable voltage reference in the temperature range of -40-150°C. When EMI disturbances are present, the circuit exhibits only 6.7 mV of offset for interfering signals in the frequency range of 150 kHz-1 GHz. © 2011 ACM.

Power system capacity expansion planning model considering carbon emissions constraints

This paper presents a power system capacity expansion planning modelconsidering carbon emissions constraints. In addition to the traditionaltechnical and economical issues usually considered in the planning process, two environmental policies that consist on the taxation and the annual limitsof carbon dioxide (CO 2) emissions are considered. Furthermore, the gradualretirement of old inefficient generation plants has been included. The approachguarantees a cleaner electricity production in the expanded power system ata relatively low cost. The proposed model considers the transmission systemand is applied to a 4-region and 11-region power systems over a 20-yearplanning horizon. Results show practical investment decisions in terms of sustainability and costs.

Fast fault diagnosis in power transformers using optimum-path forest

In this paper we propose a fast and an accurate method for fault diagnosis in power transformers by means of Optimum-Path Forest (OPF) classifier. Since we applied Dissolved Gas Analysis (DGA), the samples have been labeled by IEEE/IEC standard, which was further analyzed by OPF and several other well known supervised pattern recognition techniques. The experiments have showed that OPF can achieve high recognition rates with low computational cost. © 2012 IEEE.

Tri-state single-phase integrated inverters with input to output power decoupling control

Researches on control for power electronics have looked for original solutions in order to advance renewable resources feasibility, specially the photovoltaic (PV). In this context, for PV renewable energy source the usage of compact, high efficiency, low cost and reliable converters are very attractive. In this context, two improved simplified converters, namely Tri-state Boost and Tri-state Buck-Boost integrated single-phase inverters, are achieved with the presented Tri-state modulation and control schemes, which guarantees the input to output power decoupling control. This feature enhances the field of single-phase PV inverters once the energy storage is mainly inductive. The main features of the proposal are confirmed with some simulations and experimental results. © 2012 IEEE.

Robust control applied to power flow control in single-phase inverter with LCL filter, using droop control and D-stability

This paper proposes a new methodology to control the power flow between a distributed generator (DG) and the electrical power distribution grid. It is used the droop voltage control to manage the active and reactive power. Through this control a sinusoidal voltage reference is generated to be tracked by voltage loop and this loop generates the current reference for the current loop. The proposed control introduces feed-forward states improving the control performance in order to obtain high quality for the current injected to the grid. The controllers were obtained through the linear matrix inequalities (LMI) using the D-stability analysis to allocate the closed-loop controller poles. Therefore, the results show quick transient response with low oscillations. Thus, this paper presents the proposed control technique, the main simulation results and a prototype with 1000VA was developed in the laboratory in order to demonstrate the feasibility of the proposed control. © 2012 IEEE.

Biomechanical effect of one session of low-level laser on the bone-titanium implant interface

Low-level laser (LLL) has been used on peri-implant tissues for accelerating bone formation. However, the effect of one session of LLL in the strength of bone-implant interface during early healing process remains unclear. The present study aims to evaluate the removal torque of titanium implants irradiated with LLL during surgical preparation of implant bed, in comparison to non-irradiation. Sixty-four Wistar rats were used. Half of the animals were included in LLL group, while the other half remained as control. All animals had the tibia prepared with a 2 mm drill, and a titanium implant (2.2 × 4 mm) was inserted. Animals from LLL group were irradiated with laser (gallium aluminum arsenide), with a wavelength of 808 nm, a measured power output of 50 mW, to emit radiation in collimated beams (0.4 cm2), for 1 min and 23 s, and an energy density of 11 J/cm2. Two applications (22 J/cm 2) were performed immediately after bed preparation for implant installation. Flaps were sutured, and animals from both groups were sacrificed 7, 15, 30, and 45 days after implant installation, when load necessary for removing implant from bone was evaluated by using a torquimeter. In both groups, torque values tended to increase overtime; and at 30 and 45 days periods, values were statistically higher for LLL group in comparison to control (ANOVA test, p < 0.0001). Thus, it could be suggested that a single session of irradiation with LLL was beneficial to improve bone-implant interface strength, contributing to the osseointegration process. © 2012 Springer-Verlag London Ltd.

Design and development of a low-cost solar tracker

To become competitive, ultimately, photovoltaics should have its costs reduced and use photovoltaic systems of greater efficiency. The main steps in this direction are the use of new materials, the improvement in the manufacture of modules and the adoption of techniques of maximum power point tracking and of solar tracking. This article aims at presenting the project and development of an azimuth and elevation solar tracker, based on a new conception of the positioning sensor, composed of an array of four photoresistors. The two direct current motors that operate in the vertical and horizontal axes are controlled by a proportional-integral microcontroller. The conditions of the project were low cost, small energy consumption and versatility. The microcontroller can also incorporate a maximum power point tracking algorithm. The performance of solar tracker prototype in the initial phase of field tests can be considered appropriate. © Institution of Engineers Australia, 2013.

Sensor eletro-óptico de tensões elevadas e sua viabilidade para implementação de TP óptico

Pós-graduação em Engenharia Elétrica - FEIS

Renewable energy sources in Latin America and the Caribbean: situation and policy proposals

Includes bibliography

Capital Flows to Latin America and the Caribbean: Recent Developments

For six years, the global economy has been driven by the U.S. Federal Reserve’s policies of easy money. Liquidity has flowed from developed to developing economies, financing infrastructure and corporate investment and allowing consumers to indulge in credit-fuelled retail spending. Thus the effective ending of the Fed’s third round of asset purchases (QE3) at the end of October represents both a watershed and the beginning of a new stage in the world economy. The end of asset-purchases comes at a challenging time for emerging markets, with China’s economy slowing, the Euro zone struggling to avoid a recession and the Japanese economy already in recession. The unwinding of the U.S. monetary stimulus, while the European Central Bank and the Bank of Japan step up their monetary stimulus, has underpinned an appreciation by the U.S. dollar, in which most commodities are priced. An appreciated dollar makes dollar-denominated commodities more expensive to buyers, thereby creating pressure for sellers to lower their prices. Latin American markets ended the third quarter of 2014 under pressure from a stronger U.S. dollar. In this changing external context, there are many signs that a slowdown in Latin American and Caribbean (LAC) financial markets, particularly debt markets, which have been breaking issuance records for the past six years, may slowdown from now on. Commodity prices – including those of oil, base metals and some goods – are in a prolonged slump. The Bloomberg commodity price index, a benchmark of commodity investments, has fallen to a five-year low as China’s economy slows down, and with it the demand for commodities. Investment into the LAC region has decelerated, in large part because of a deceleration of mining investments. Latin American currencies have suffered depreciations, as current account deficits have widening for a number of countries. And LAC companies, having issued record amounts of foreign currency bonds may now struggle to service their debt. In October, credit-rating agency Moody’s downgraded the bonds of Brazil’s Petrobras to tow notches above speculative grade because of the impact of falling oil prices and the weaker real on its debt. Growth prospects look brighter in 2015 relative to 2014, but a strengthening U.S. dollar, uneven global growth and weakness in commodity prices are skewing the risk toward the downside for the 2015 forecasts across the region. The Institute of International Finance expects the strengthening of the dollar to have a divergent impact across the region, however, depending on trade and financial linkages. The Institute of International Finance, Capital Flows to Emerging Markets, October 2, 2014. A stronger dollar lifts U.S. purchasing power, supporting exports, growth and capital inflows in countries with close trade links to the U.S. economy. However, rising dollar financing costs will increase pressure on countries with weak external positions. Given the effects of falling oil prices and a stronger dollar, some companies in the region, having issued record amounts of foreign currency bonds, may now struggle to service their debts. Prospects of Fed rate hikes resulting in tighter global liquidity amid the rapid rise in the corporate external bond stock has indeed raised concerns over some companies. However, there is still a shortage of bonds at a global level and the region still enjoys good economic policy management for the most part, so LAC debt markets may continue to enjoy momentum despite occasional bursts of high volatility – even if not at the record levels of recent years.

Entre Aracne e Atena: professoras em situação de violência doméstica

Este estudo tem como tema a violência doméstica contra professoras e toma como objeto os registros sobre esse fato presentes em Inquéritos Policiais da Delegacia de Atendimento à Mulher de Santarém-PA. A questão central da pesquisa consiste em problematizar: quais articulações entre a condição de violentada e o status profissional de professora são apresentadas no processo de denúncia, via inquérito policial, por professoras em situação de violência doméstica no município de Santarém? A partir dessa indagação central o objetivo geral da pesquisa volta-se para analisar as articulações entre a condição de violentada e o status profissional de professora presentes nos inquéritos policiais, articulado com a investigação das confluências entre as discussões sobre as relações de gênero, a violência doméstica e os direitos humanos das mulheres e a compreensão das formas de atravessamento entre os marcadores sociais das professoras em situação de violência doméstica. O tratamento metodológico foi pautado em um estudo qualitativo que se vale da pesquisa documental, por meio da análise de conteúdo dos Inquéritos Policiais da DEAM de Santarém, documentos estes que registram não só a ocorrência da violência como também o contexto em que ocorreram os atravessamentos dos diferentes marcadores sociais assumidos pelos sujeitos, autores das agressões e agredidas e suas intersecções. O marco teórico da pesquisa está pautado na perspectiva relacional que busca compreender a violência contra as mulheres resultantes das redes de relações de poder entre homens e mulheres e entre estes e os marcadores sociais que assumem. As análises conclusivas evidenciam que as tramas da violência doméstica contra as mulheres são complexas e marcadas por questões, tais como: a persistência na submissão à violência doméstica das docentes embora independam economicamente do agressor; a diferença geracional entre as docentes e os autores das agressões é marcada por homens mais jovens versus mulheres maduras, em processo de envelhecimento; o baixo nível de escolaridade dos agressores e o baixo prestígio da ocupação que desenvolvem em relação ao nível de escolaridade e posição social da profissão das docentes agredidas que possuem profissão definida, de natureza intelectual e reconhecida socialmente; as denúncias contra os autores das agressões só ocorreram após os motivos extremos de ameaças de morte e exposição pública da violência em uma profissão de natureza pública, a de professora; que o registro da ocorrência concretiza a alternância de poder nas relações de gênero e da própria violência doméstica, visto que na dinâmica da circulação de poder com os autores das agressões, as professoras agredidas reconheceram-se também como detentoras de poder, avançando da condição de vítimas para a de protagonistas; que na situação de violentadas, as professoras, foram capazes de perceber fios invisíveis naturalizados na teia da violência doméstica, partindo para o enfrentamento público, a denúncia.

Effects of Low-Level Laser Therapy on Biceps Braquialis Muscle Fatigue in Young Women

Objective: This study aims to investigate the effects of low-level laser therapy (LLLT) on biceps brachi muscular fatigue in 20 young females. Background data: Exhausting physical activity leads to muscular fatigue, which could decrease muscular strength, and may cause impairment in motor control and muscle pain. Several biochemical and biophysical resources have been studied in an attempt to accelerate the recovery of muscle fatigue. Among these, LLLT is emphasized. Methods: Twenty subjects were randomized in one laser group and one placebo group in two sessions of a crossover design experimental procedure; the second session taking place within 7 days of the first. In the first session, subjects underwent a collection of surface electromyographic (SEMG) data of the biceps brachii muscle, followed by active or placebo LLLT at the same muscle, followed then by another EMG sample of biceps brachii. Blood samples were collected five times during the experimental procedure. Second session procedures were identical to the first, with exception of LLLT, which was the opposite of the first session. The fatigue protocol consisted of 60sec of elbow flexion-extension movement performed with 75% of one maximum repetition. Blood lactate, EMG fatigue, and the number of elbow flexion-extension repetitions during the fatigue protocol were used to evaluate the effects of laser therapy (808nm wavelength, 100mW output power, power density of 35.7 W/cm(2), 70sec each point and 7J/point on eight points). Results: No statistical differences were found for eletromyographic fatigue and blood lactate values between groups. Mean numbers of elbow flexion-extension repetitions were 22.6 +/- 7.58 after placebo, and 25.1 +/- 9.89 after active LLLT group, but these differences were not statistically significant (p=0.342). Conclusions: LLLT had limited effects on delaying muscle fatigue in a young female sample, although a tendency was observed in the active laser group toward showing lower electromyography fatigue of biceps brachii muscle. No intergroup differences were found in the number of muscle contractions and lactate concentration.

Streptococcus Mutans Photoinactivation by Combination of Short Exposure of a Broad-Spectrum Visible Light and Low Concentrations of Photosensitizers

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Discriminant analysis of neuromuscular variables in chronic low back pain

Background: Investigation and discrimination of neuromuscular variables related to the complex aetiology of low back pain could contribute to clarifying the factors associated with symptoms. Objective: Analysing the discriminative power of neuromuscular variables in low back pain. Methods: This study compared muscle endurance, proprioception and isometric trunk assessments between women with low back pain (LBP, n=14) and a control group (CG, n=14). Multivariate analysis of variance and discriminant analysis of the data were performed. Results: The muscle endurance time (s) was shorter in the LBP group than in the CG (p=0.004) with values of 85.81 (37.79) and 134.25 (43.88), respectively. The peak torque (Nm/kg) for trunk extension was 2.48 (0.69) in the LBP group and 3.56 (0.88) in the GG (p=0.001); for trunk flexion, the mean torque was 1.49 (0.40) in the LBP group and 1.85 (0.39) in the CG (p=0.023). The repositioning error (degrees) before the endurance test was 2.66 (1.36) in the LBP group and 2.41 (1.46) in the CG (p=0.664), and after the endurance test, it was 2.95 (1.94) in the LBP group and 2.00 (1.16) in the CG (p=0.06). Furthermore, the variables showed discrimination between the groups (p=0.007), with 78.6% of the individuals with low back pain correctly classified in the LBP group. In turn, variables related to muscle activation showed no difference in discrimination between the groups (p=0.369). Conclusion: Based on these findings, the clinical management of low back pain should consist of both resistance and strength training, particularly in the extensor muscles.

Suitability of carbon fiber-reinforced polymers as power cable cores: Galvanic corrosion and thermal stability evaluation

The increasing demand for electrical energy and the difficulties involved in installing new transmission lines presents a global challenge. Transmission line cables need to conduct more current, which creates the problem of excessive cable sag and limits the distance between towers. Therefore, it is necessary to develop new cables that have low thermal expansion coefficients, low densities, and high resistance to mechanical stress and corrosion. Continuous fiber-reinforced polymers are now widely used in many industries, including electrical utilities, and provide properties that are superior to those of traditional ACSR (aluminum conductor steel reinforced) cables. Although composite core cables show good performance in terms of corrosion, the contact of carbon fibers with aluminum promotes galvanic corrosion, which compromises mechanical performance. In this work, three different fiber coatings were tested (phenol formaldehyde resin, epoxy-based resin, and epoxy resin with polyester braiding), with measurements of the galvanic current. The use of epoxy resin combined with polyester braiding provided the best inhibition of galvanic corrosion. Investigation of thermal stability revealed that use of phenol formaldehyde resin resulted in a higher glass transition temperature. On the other hand, a post-cure process applied to epoxy-based resin enabled it to achieve glass transition temperatures of up to 200 degrees C. (C) 2014 Elsevier Ltd. All rights reserved.