914 resultados para Local Variation Method
Resumo:
Thesis (Ph.D.)--University of Washington, 2016-03
Resumo:
Thesis (Ph.D.)--University of Washington, 2016-06
Resumo:
Thesis (Master's)--University of Washington, 2016-06
Resumo:
In this paper, we present a technique for equilibria characterization of activated carbon having slit-shaped pores. This method was first developed by Do (Do, D. D. A new method for the characterisation of micro-mesoporous materials. Presented at the International Symposium on New Trends in Colloid and Interface Science, September 24-26, 1998 Chiba, Japan) and applied by his group and other groups for characterization of pore size distribution (PSD) as well as adsorption equilibria determination of a wide range of hydrocarbons. It is refined in this paper and compared with the grand canonical Monte Carlo (GCMG) simulation and density functional theory (DFT). The refined theory results in a good agreement between the pore filling pressure versus pore width and those obtained by GCMG and DFT. Furthermore, our local isotherms are qualitatively in good agreement with those obtained by the GCMC simulations. The main advantage of this method is that it is about 4 orders of magnitude faster than the GCMC simulations, making it suitable for optimization studies and design purposes. Finally, we apply our method and the GCMG in the derivation of the PSD of a commercial activated carbon. It was found that the PSD derived from our method is comparable to that derived from the GCMG simulations.
Resumo:
Multicellular tumor spheroids (MCTS) are used as organotypic models of normal and solid tumor tissue. Traditional techniques for generating MCTS, such as growth on nonadherent surfaces, in suspension, or on scaffolds, have a number of drawbacks, including the need for manual selection to achieve a homogeneous population and the use of nonphysiological matrix compounds. In this study we describe a mild method for the generation of MCTS, in which individual spheroids form in hanging drops suspended from a microtiter plate. The method has been successfully applied to a broad range of cell lines and shows nearly 100% efficiency (i.e., one spheroid per drop). Using the hepatoma cell line, HepG2, the hanging drop method generated well-rounded MCTS with a narrow size distribution (coefficient of variation [CV] 10% to 15%, compared with 40% to 60% for growth on nonadherent surfaces). Structural analysis of HepG2 and a mammary gland adenocarcinoma cell line, MCF-7, composed spheroids, revealed highly organized, three-dimensional, tissue-like structures with an extensive extracellular matrix. The hanging drop method represents an attractive alternative for MCTS production, because it is mild, can be applied to a wide variety of cell lines, and can produce spheroids of a homogeneous size without the need for sieving or manual selection. The method has applications for basic studies of physiology and metabolism, tumor biology, toxicology, cellular organization, and the development of bioartificial tissue. (C) 2003 Wiley Periodicals, Inc.
Resumo:
We report a method using variation in the chloroplast genome (cpDNA) to test whether oak stands of unknown provenance are of native and/or local origin. As an example, a sample of test oaks, of mostly unknown status in relation to nativeness and localness, were surveyed for cpDNA type. The sample comprised 126 selected trees, derived from 16 British seed stands, and 75 trees, selected for their superior phenotype (201 tree samples in total). To establish whether these two test groups are native and local, their cpDNA type was compared with that of material from known autochthonous origin (results of a previous study which examined variation in 1076 trees from 224 populations distributed across Great Britain). In the previous survey of autochthonous material, four cpDNA types were identified as native; thus if a test sample possessed a new haplotype then it could be classed as non-native. Every one of the 201 test samples possessed one of the four cpDNA types found within the autochthonous sample. Therefore none could be proven to be introduced and, on this basis, was considered likely to be native. The previous study of autochthonous material also found that cpDNA variation was highly structured geographically and, therefore, if the cpDNA type of the test sample did not match that of neighbouring autochthonous trees then it could be considered to be non-local. A high proportion of the seed stand group (44.2 per cent) and the phenotypically superior trees (58.7 per cent) possessed a cpDNA haplotype which matched that of the neighbouring autochthonous trees and, therefore, can be considered as local, or at least cannot be proven to be introduced. The remainder of the test sample could be divided into those which did not grow in an area of overall dominance (18.7 per cent of seed stand trees and 28 per cent of phenotypically superior) and those which failed to match the neighbouring autochthonous haplotype (37.1 per cent and 13.3 per cent, respectively). Most of the non-matching test samples were located within 50 km of an area dominated by a matching autochthonous haplotype (96.0 per cent and 93.5 per cent, respectively), and potentially indicates only local transfer. Whilst such genetic fingerprinting tests have proven useful for assessing the origin of stands of unknown provenance, there are potential limitations to using a marker from the chloroplast genome (mostly adaptively neutral) for classifying seed material into categories which have adaptive implications. These limitations are discussed, particularly within the context of selecting adaptively superior material for restocking native forests.
Resumo:
This article describes the construction and use of a systematic structured method of mental health country situation appraisal, in order to help meet the need for conceptual tools to assist planners and policy makers develop and audit policy and implementation strategies. The tool encompasses the key domains of context, needs, resources, provisions and outcomes, and provides a framework for synthesizing key qualitative and quantitative information, flagging up gaps in knowledge, and for reviewing existing policies. It serves as an enabling tool to alert and inform policy makers, professionals and other key stakeholders about important issues which need to be considered in mental health policy development. It provides detailed country specific information in a systematic format, to facilitate global sharing of experiences of mental health reform and strategies between policy makers and other stakeholders. Lastly, it is designed to be a capacity building tool for local stakeholders to enhance situation appraisal, and multisectorial policy development and implementation.
Resumo:
Distortional buckling, unlike the usual lateral-torsional buckling in which the cross-section remains rigid in its own plane, involves distortion of web in the cross-section. This type of buckling typically occurs in beams with slender web and stocky flanges. Most of the published studies assume the web to deform with a cubic shape function. As this assumption may limit the accuracy of the results, a fifth order polynomial is chosen here for the web displacements. The general line-type finite element model used here has two nodes and a maximum of twelve degrees of freedom per node. The model not only can predict the correct coupled mode but also is capable of handling the local buckling of the web.
Resumo:
A novel and precise assay that facilitates high-throughput screening of fibrinolytic agents was developed based on the automated assessment of the euglobulin clot lysis time in microtitre plates. Euglobulin fractions from fresh plasma samples were assessed over 28 days to determine the inter-assay and intra-assay precision. The intra-assay (coefficient of variation range, 0.7-2.6%) and inter-assay precision (coefficient of variation range, 6.8-12.1%) was found to be well within limits required by the Food and Drug Administration. On day 1 and day 28, the results of the microtitre plate euglobulin clot lysis time method were compared with tissue plasminogen activator activity, plasminogen activator inhibitor activity and results produced on fibrin plates. All comparisons were found to correlate significantly. The validity of this method for assaying fibrinolytic agents was assessed by comparing dose-response curves for streptokinase produced using fibrin plates and this method. The critical influence of ambient temperature on the inter-assay reproducibility of this method was established by testing samples over a range of temperatures between 20degreesC and 40degreesC. (C) 2004 Lippincott Williams Wilkins.
Resumo:
Adsorption of ethylene and ethane on graphitized thermal carbon black and in slit pores whose walls are composed of graphene layers is studied in detail to investigate the packing efficiency, the two-dimensional critical temperature, and the variation of the isosteric heat of adsorption with loading and temperature. Here we used a Monte Carlo simulation method with a grand canonical Monte Carlo ensemble. A number of two-center Lennard-Jones (LJ) potential models are investigated to study the impact of the choice of potential models in the description of adsorption behavior. We chose two 2C-LJ potential models in our investigation of the (i) UA-TraPPE-LJ model of Martin and Siepmann (J. Phys. Chem. B 1998,102, 25692577) for ethane and Wick et al. (J. Phys. Chem. B 2000,104, 8008-8016) for ethylene and (ii) AUA4-LJ model of Ungerer et al. (J. Chem. Phys. 2000,112, 5499-5510) for ethane and Bourasseau et al. (J. Chem. Phys. 2003, 118, 3020-3034) for ethylene. These models are used to study the adsorption of ethane and ethylene on graphitized thermal carbon black. It is found that the solid-fluid binary interaction parameter is a function of adsorbate and temperature, and the adsorption isotherms and heat of adsorption are well described by both the UA-TraPPE and AUA models, although the UA-TraPPE model performs slightly better. However, the local distributions predicted by these two models are slightly different. These two models are used to explore the two-dimensional condensation for the graphitized thermal carbon black, and these values are 110 K for ethylene and 120 K for ethane.
Resumo:
Geographic variation in the advertisement call of the male Satin Bowerbird, Ptilonorhynchus violaceus, was investigated in three populations in south-eastern Queensland. The call was found to differ significantly among the three geographically distinct populations. A discriminant function analysis using five measurements of call frequency and duration provided 100% classification success of the 25 individuals. The observed geographic variation in this call may result from adaptation to the local acoustic environment in these populations, or from genetic or cultural divergence among populations. Further research involving the acoustic properties of the habitats, population genetics and a larger number of populations is required to fully understand this pattern of call variation.
Resumo:
An X-ray visualization technique has been used for the quantitative determination of local liquid holdups distribution and liquid holdup hysteresis in a nonwetting two-dimensional (2-D) packed bed. A medical diagnostic X-ray unit has been used to image the local holdups in a 2-D cold model having a random packing of expanded polystyrene beads. An aqueous barium chloride solution was used as a fluid to achieve good contrast on X-ray images. To quantify the local liquid holdup, a simple calibration technique has been developed that can be used for most of the radiological methods such as gamma ray and neutron radiography. The global value of total liquid holdup, obtained by X-ray method, has been compared with two conventional methods: drainage and tracer response. The X-ray technique, after validation, has been used to visualize and quantify, the liquid hysteresis phenomena in a packed bed. The liquid flows in preferred paths or channels that carry droplets/rivulets of increasing size and number as the liquid flow rate is increased. When the flow is reduced, these paths are retained and the higher liquid holdup that persists in these regions leads to the holdup hysteresis effect. Holdup in some regions of the packed bed may be an order of magnitude higher than average at a particular flow rate. (c) 2005 American Institute of Chemical Engineers
Resumo:
In this paper we apply a new method for the determination of surface area of carbonaceous materials, using the local surface excess isotherms obtained from the Grand Canonical Monte Carlo simulation and a concept of area distribution in terms of energy well-depth of solid–fluid interaction. The range of this well-depth considered in our GCMC simulation is from 10 to 100 K, which is wide enough to cover all carbon surfaces that we dealt with (for comparison, the well-depth for perfect graphite surface is about 58 K). Having the set of local surface excess isotherms and the differential area distribution, the overall adsorption isotherm can be obtained in an integral form. Thus, given the experimental data of nitrogen or argon adsorption on a carbon material, the differential area distribution can be obtained from the inversion process, using the regularization method. The total surface area is then obtained as the area of this distribution. We test this approach with a number of data in the literature, and compare our GCMC-surface area with that obtained from the classical BET method. In general, we find that the difference between these two surface areas is about 10%, indicating the need to reliably determine the surface area with a very consistent method. We, therefore, suggest the approach of this paper as an alternative to the BET method because of the long-recognized unrealistic assumptions used in the BET theory. Beside the surface area obtained by this method, it also provides information about the differential area distribution versus the well-depth. This information could be used as a microscopic finger-print of the carbon surface. It is expected that samples prepared from different precursors and different activation conditions will have distinct finger-prints. We illustrate this with Cabot BP120, 280 and 460 samples, and the differential area distributions obtained from the adsorption of argon at 77 K and nitrogen also at 77 K have exactly the same patterns, suggesting the characteristics of this carbon.
Resumo:
We compared growth rates of the lemon shark, Negaprion brevirostris, from Bimini, Bahamas and the Marquesas Keys (MK), Florida using data obtained in a multi-year annual census. We marked new neonate and juvenile sharks with unique electronic identity tags in Bimini and in the MK we tagged neonate and juvenile sharks. Sharks were tagged with tiny, subcutaneous transponders, a type of tagging thought to cause little, if any disruption to normal growth patterns when compared to conventional external tagging. Within the first 2 years of this project, no age data were recorded for sharks caught for the first time in Bimini. Therefore, we applied and tested two methods of age analysis: ( 1) a modified 'minimum convex polygon' method and ( 2) a new age-assigning method, the 'cut-off technique'. The cut-off technique proved to be the more suitable one, enabling us to identify the age of 134 of the 642 previously unknown aged sharks. This maximised the usable growth data included in our analysis. Annual absolute growth rates of juvenile, nursery-bound lemon sharks were almost constant for the two Bimini nurseries and can be best described by a simple linear model ( growth data was only available for age-0 sharks in the MK). Annual absolute growth for age-0 sharks was much greater in the MK than in either the North Sound (NS) and Shark Land (SL) at Bimini. Growth of SL sharks was significantly faster during the first 2 years of life than of the sharks in the NS population. However, in MK, only growth in the first year was considered to be reliably estimated due to low recapture rates. Analyses indicated no significant differences in growth rates between males and females for any area.
Resumo:
In magnetic resonance imaging (MRI), the MR signal intensity can vary spatially and this spatial variation is usually referred to as MR intensity nonuniformity. Although the main source of intensity nonuniformity arises from B, inhomogeneity of the coil acting as a receiver and/or transmitter, geometric distortion also alters the MR signal intensity. It is useful on some occasions to have these two different sources be separately measured and analyzed. In this paper, we present a practical method for a detailed measurement of the MR intensity nonuniformity. This method is based on the same three-dimensional geometric phantom that was recently developed for a complete measurement of the geometric distortion in MR systems. In this paper, the contribution to the intensity nonuniformity from the geometric distortion can be estimated and thus, it provides a mechanism for estimation of the intensity nonuniformity that reflects solely the spatial characteristics arising from B-1. Additionally, a comprehensive scheme for characterization of the intensity nonuniformity based on the new measurement method is proposed. To demonstrate the method, the intensity nonuniformity in a 1.5 T Sonata MR system was measured and is used to illustrate the main features of the method. (c) 2005 American Association of Physicists in Medicine.