Synthesis, spectroscopic characterization and radiosensitizing properties of acetato-bridged copper(II) complexes with 5-nitroimidazole drugs

Three novel acetato-bridged dinuclear copper(II) complexes with 5-nitroimidazoles (CuAcNtrim) and the known copper-acetato-metronidazole have been prepared by an environment-friendly route and spectroscopically characterized. The CuAcNtrim compounds of formula [Cu(2)(mu-O(2)CCH(3))(4)Ntrim(2)], where Ntrim = metronidazole (1), secnidazole (2), tinidazole (3) or nimorazole (4), exhibit dimeric copper-acetato paddle-wheel structures with Ntrim axial ligands coordinated to copper(II) ions through the N(3) atoms of the imidazole rings. EPR data indicate antiferromagnetic behavior for this novel series of copper complexes. The constant coupling has been found to decrease along with the increasing of basicity of the Ntrim axial ligand. The CuAcNtrim complexes and the correspondent Ntrim parent drugs have shown radiosensitizer properties for Hep2 (human larynx cancer) cell line in vitro. The best enhancement of radiosensitizer activity upon coordination of the Ntrim drug to copper(II) has been found for the nimorazole compound which has the strongest Cu-Ntrim bond and exhibits the highest lipophilicity within the series of CuAcNtrim complexes. (C) 2010 Elsevier B.V. All rights reserved.

Efficient and low cost devices for solar energy conversion: Efficiency and stability of some natural-dye-sensitized solar cells

Dye-sensitized solar cells, named by us Dye-Cells, are one of the most promising devices for solar energy conversion due to their reduced production cost and low environmental impact, especially those sensitized by natural dyes. The efficiency and stability of devices based on natural sensitizers such as mulberry (Morus alba Lam), blueberry (Vaccinium myrtillus Lam), and jaboticaba`s skin (Mirtus cauliflora Mart) were investigated. Dye-Cells prepared with aqueous mulberry extract presented the highest P(max) value (1.6 mW cm(-2)) with J(sc) = 6.14 mA cm(-2) and V(oc) = 0.49 V, Photoelectrochemical parameters of 16 cm(2) active area devices sensitized by mulberry dye were constant for 14 weeks of continuous evaluation. Moreover, the cell remained stable even after 36 weeks with a fairly good efficiency. Therefore, mulberry dye opens up a perspective of commercial feasibility for inexpensive and environmentally friendly Dye-Cells. (C) 2009 Elsevier B.V. All rights reserved.

Hydrogen peroxide and supercritical carbon dioxide: a new bleaching stage for Eucalyptus kraft-O(2) pulps

Kraft pulp is currently bleached largely by the elemental chlorine free (ECF) technology with oxygen, chlorine dioxide, and hydrogen as active agents. This technology brought about significant environmental improvements in relation to standard processes based on chlorine gas and hypochlorite, but there is still need for further improvements. This study presents a novel environmentally friendly bleaching stage - the so-called `hydrogen peroxide in supercritical carbon dioxide`, P((SC-CO2)) - that can be adapted to current ECF bleaching processes, with preference in cases where hydrogen peroxide is already used. In this study, the P((SC-CO2)) stage was evaluated as a replacement to the last peroxide stage of the D(EP)DP bleaching sequence and to the first peroxide stage of the D(EP)DP sequence, for an oxygen delignified eucalypt kraft-O(2) pulp. The P((SC-CO2)) stage was run with 0.5% hydrogen peroxide, at 15% consistency, 70 degrees C, and 73 bar. The reaction time was 30 min. The performances of regular P stages and the new P((SC-CO2)) stage were compared. Promising results were observed with the DEP((SC-CO2))DP sequence; the P((SC-CO2)) decreased kappa number from 2.7 to 2.1, and the hexenuronic acid groups from 17.0 to 12.4 mmol kg(-1). The P((SC-CO2)) stage showed poor performance when applied in the D(EP)DP((SC-CO2)) sequence. It is concluded that the process presents potential but requires further optimization to improve selectivity and efficiency.

Chitosan, sisal cellulose, and biocomposite chitosan/sisal cellulose films prepared from thiourea/NaOH aqueous solution

Environmentally friendly biocomposites were successfully prepared by dissolving chitosan and cellulose in a NaOH/thiourea solvent with subsequent heating and film casting. Under the considered conditions, NaOH/thiourea led to chain depolymerization of both biopolymers without a dramatic loss of film forming capacities. Compatibility of both biopolymers in the biocomposite was firstly assessed through scanning electron microscopy, revealing an intermediate organization between cellulose fiber network and smoothness of pure chitosan. DSC analyses led to exothermic peaks close to 285 and 315 degrees C for the biocomposite, compared to the exothermic peaks of chitosan (275 degrees C) and cellulose (265 and 305 degrees C), suggesting interactions between chitosan and cellulose. Contact angle analyses pointed out the deformation that can occur at the surface due to the high affinity of the;e materials with water. T(2) NMR relaxometry behavior of biocomposites appeared to be dominated by chitosan. Other properties of films, as crystallinity, water sorption isotherms, among others, are also discussed. (C) 2010 Published by Elsevier Ltd.

Anticorrosive cerium-based coatings prepared by the sol-gel method

The development of efficient anti-corrosion and environmentally friendly coating systems are needed for the replacement of the highly toxic Cr-based conversion coatings for corrosion protection of aluminum alloys. In this study, we demonstrate that the direct application of ceramic cerium-based sol-gel coatings to AA7075-T6 substrates produces high-performance anti-corrosion layers. Electrochemical experiments and analyses of the microstructure demonstrate that the protective layers are very efficient for the passivation of the alloy surfaces operating as both passive and active barrier for corrosion protection.

Tio steg för lyckad amning : En granskning av en BB-avdelning i Mellansverigeoch hur de uppfyller UNICEF/WHO´s mål för en amningsvänlig vård

Syftet med denna studie var att undersöka om en BB-avdelning i Mellansverige uppfyllde UNICEF/WHO´s kriterier för en amningsvänlig vård, samt att jämföra resultaten med tidigare utvärderingar från åren 1996, 1997, 1998 och 2002. Syftet var också att undersöka vad som påverkat mammorna i beslutet att vilja amma. Amningsvänlig vård utgår från ”Tio steg till lyckad amning” och är en global amningsstrategi. Studien genomfördes i form av intervjuer med 40 nyförlösta mammor samt 22 intervjuer med personal. Vidare gjordes observationer på BB-avdelningen samt genomgång av avdelningens skrivna material angående amning, riktat till personal och mammor. Kriterierna för att amningsvänlig vård bedrivs är att, åtta av tio steg i amningsstrategin ska vara uppfyllda. Den undersökta avdelningen uppfyllde fem av de tio stegen. Genomgående i studien framkom att personalen hade goda praktiska amningskunskaper. Mammornas kunskap om hur de upprätthöll amningen var inte tillräckliga. Vidare hade inte mammorna fått tillräcklig kännedom om var de kunde vända sig för att få råd och stöd angående amning efter hemgång. Resultatet var jämförbart med studierna från 1996 och 2002, men en försämring jämfört med studierna 1997 och 1998 då de klarade åtta respektive nio av de tio stegen. Mammorna tillfrågades också om vad som påverkat dem mest i sitt beslut att amma. För förstföderskorna var det rådgivningen de fått på MVC och för omföderskor betydde tidigare erfarenheter mest.

A GUI for online presentation of steel and steelmaking ladle temperature data and simulation.

Continuous casting is a casting process that produces steel slabs in a continuous manner with steel being poured at the top of the caster and a steel strand emerging from the mould below. Molten steel is transferred from the AOD converter to the caster using a ladle. The ladle is designed to be strong and insulated. Complete insulation is never achieved. Some of the heat is lost to the refractories by convection and conduction. Heat losses by radiation also occur. It is important to know the temperature of the melt during the process. For this reason, an online model was previously developed to simulate the steel and ladle wall temperatures during the ladle cycle. The model was developed as an ODE based model using grey box modeling technique. The model’s performance was acceptable and needed to be presented in a user friendly way. The aim of this thesis work was basically to design a GUI that presents steel and ladle wall temperatures calculated by the model and also allow the user to make adjustments to the model. This thesis work also discusses the sensitivity analysis of different parameters involved and their effects on different temperature estimations.

Sustainability & Consumer behavior towards Sustainability in Norway and Sweden

AimSustainability has become an important factor to consider while buying goods and services. People are being more conscious toward environmental impacts of products and services. This attitude has motivated many businesses to develop their production in contact with sustainability. The aim of this paper is to investigate different consumer behaviors toward sustainability in general and in relation to vehicles in Norway and Sweden.ApproachThe project has been embarked by dividing it into two tasks.1. Analyzing past, present and future development, growth and importance of sustainability concept. Describe the role of Government authorities in Norway and Sweden to promote sustainable consumption.2. Investigating important factors of consumer behaviors which influence their buying decision toward sustainable products in general and in relation to sustainable vehicles. Highlight the role of vehicle manufacturing companies to promote sustainable consumption.MethodA research has been conducted in order to explore consumer behavior toward sustainability in Norway and Sweden. Research is based on Document study and primary research which include questionnaire survey with consumers and interviews with vehicle dealers. In addition an expert inquiry is conducted to light up consumer intensions in Norway and Sweden toward sustainability.ResultsThe result of investigation has been revealed in shape of analyses and conclusion at the end. A comparison has been made between primary research and secondary research and findings are overlapping. Sustainable vehicles are being more popular among consumers in Norway and Sweden. Consumption trends are changing over time and environmental friendly attitudes are more developing among Swedish consumers as compared to Norwegian.

Simulation of Photovoltaic Panel Production as Complement to Ground Source Heat Pump System

This master thesis presents a new technological combination of two environmentally friendly sources of energy in order to provide DHW, and space heating. Solar energy is used for space heating, and DHW production using PV modules which supply direct current directly to electrical heating elements inside a water storage tank. On the other hand a GSHP system as another source of renewable energy provides heat in the water storage tank of the system in order to provide DHW and space heating. These two sources of renewable energy have been combined in this case-study in order to obtain a more efficient system, which will reduce the amount of electricity consumed by the GSHP system.The key aim of this study is to make simulations, and calculations of the amount ofelectrical energy that can be expected to be produced by a certain amount of PV modules that are already assembled on a house in Vantaa, southern Finland. This energy is then intended to be used as a complement to produce hot water in the heating system of the house beside the original GSHP system. Thus the amount of electrical energy purchased from the grid should be reduced and the compressor in the GSHP would need fewer starts which would reduce the heating cost of the GSHP system for space heating and providing hot water.The produced energy by the PV arrays in three different circuits will be charged directly to three electrical heating elements in the water storage tank of the existing system to satisfy the demand of the heating elements. The excess energy can be used to heat the water in the water storage tank to some extent which leads to a reduction of electricity consumption by the different components of the GSHP system.To increase the efficiency of the existing hybrid system, optimization of different PV configurations have been accomplished, and the results are compared. Optimization of the arrays in southern and western walls shows a DC power increase of 298 kWh/year compared with the existing PV configurations. Comparing the results from the optimization of the arrays on the western roof if the intention is to feed AC power to the components of the GSHP system shows a yearly AC power production of 1,646 kWh.This is with the consideration of no overproduction by the PV modules during the summer months. This means the optimized PV systems will be able to cover a larger part of summer demand compared with the existing system.

Obstacles and Opportunities Foreign Graduates Meet In Dalarna Labour Market, Sweden

Foreign graduates have been part of the success stories of many developed countries. This is as a result of their immeasurable deposit of ideas, knowledge, and innovation in the host country. Though the process of these foreign graduates penetrating and integrating into the labour market of the host country could be slow and rough as they encounter some obstacles on the way; they still strive to break through and be part of the country’s workforce because they foresee some opportunities therein. This research study is about the obstacles and opportunities foreign graduates meet in Dalarna labour market. The study investigated and identified the obstacles and opportunities foreign graduates meet in Dalarna labour market. For a thorough execution of this research, we collected primary data by handing questionnaires to 65 foreign graduates searching for jobs in Dalarna region and interviewed eight people, among which seven were foreign graduates and one of them was a staff at Arbestförmedlingen (Employment Agency) to give us a general view of the Dalarna labour market. We read previous research works and related articles to understand the topic in order to get an overview of the terminologies and concept to apply. This study concluded that language is a major obstacle foreign graduates meet in the Dalarna labour market. Other possible obstacles include culture, poor integration policies, lack of a placement bureau, lack of trust, limited opportunities, favoritism, lack of jobs, lack of references and experience. On the other hand factors like job availability, outgoing labour force and unskilled labour are possible opportunities foreign graduates meet in the Dalarna labour market. Furthermore flexible work time, good working atmosphere, experience, social security/welfare, good standard of living, family friendly region, higher wages, job security and cheap cost of living are also possible benefits that foreign graduates get in Dalarna.

The Role of Gay Spaces for a Gay Destination : Gay Tourism in Gran Canaria

This thesis has the aim to evaluate the role of gay spaces in Gran Canaria as a gay tourists destination with particular reference to gay exclusive resorts. The validation of the gay identity is a key motivation for homosexuals to travel, in order to connect with other homosexuals and experience the gay life that they might not be able to experience at home. Gay spaces have been defined both as liberated areas as well as ghettos, where the homosexuals are, in a way, restrained. The method chosen, a small number of semi- structured interviews with managers of gay exclusive resorts in Maspalomas, the hub of gay life in Gran Canaria, where major LGBT events are held, there is a gay friendly environment, a thriving gay scene and many gay exclusive resorts. In the case of Gran Canaria the gay-specific offer is complementary to the ‘regular’ tourism offer, as they coexist, complement and at times overlap. Nevertheless the gay centric holiday is still predominant amongst gay men, and it is likely to continue to be according to the informants. This is because gay tourists seek freedom and a sense of inclusion that they would not be able to find in mixed environments.

A restricted curriculum for second language learners : a self-fulfilling teacher strategy?

The focus of this article is on relations between classroom interaction, curricular knowledge and student engagement in diverse classrooms. It is based on a study with ethnographic perspective in which two primary school classes in Sweden were followed for three years. The analysis draws on Halliday's Systemic Functional Linguistics. The results indicate that language use in the classrooms is on a basic everyday level and that high teacher control results in low-demanding tasks and low engagement among students. Interaction in the classrooms mainly consists of short talk-turns with fragmented language, frequent repairs and interruptions, while writing and reading consists of single words and short sentences. Although the classroom atmosphere is friendly and inclusive, second language students are denied necessary opportunities to develop curricular knowledge and Swedish at the advanced level, which they will need higher up in the school system. The restricted curriculum that these students are offered in school thus restricts their opportunities to school success. Thus, I argue for a more reflective and critical approach regarding language use in classrooms.

Patienters upplevelser av vilka faktorer som har betydelse i vården på specialistsjuksköterskeledda hjärtsviktsmottagningar. : En kvalitativ studie

Bakgrund: Hjärtsvikt är ett vanligt och allvarligt tillstånd med hög dödlighet, sjuklighet och försämrad livskvalité. Det beräknas att omkring en kvarts miljon personer i Sverige har kronisk hjärtsvikt. Inrättandet av specialistsjuksköterskeledda hjärtsviktsmottagningar med läkarstöd har förbättrat behandlingen av patienter med hjärtsvikt. Syfte: Syftet med denna studie var att undersöka patienters upplevelser av vilka faktorer som har betydelse i vården på specialistsjuksköterskeledda hjärtsviktsmottagningar. Metod: En intervjustudie med semistrukturerade frågor har använts. En kvalitativ manifest innehållsanalys användes för att analysera det material som framkom vid intervjuerna. Informanterna valdes ut genom ett strategiskt urval. Resultat: Resultatet visade att en fungerande vårdrelation med sjukvården som representerades av specialistsjuksköterska på hjärtsviktsmottagningen samt information för att klara av sin egenvård var av betydelse för informanterna. En god vårdrelation beskrivs av informanterna i studien att den innehåller kontinuitet, tillit till specialistsjuksköterska, samarbete med vårdpersonal, ett bekräftande bemötande samt tillgänglighet vid behov. Konklusion: Vården på specialistsjuksköterskeledda hjärtsviktsmottagningar är betydelsefull för patienters trygghet. Det förefaller viktigt att få veta vem hjärtsviktspatienterna ska kontakta vid behov av stöd och hjälp för att hantera sin situation. Möjligheten att kontakta specialistsjuksköterska när behovet fanns upplevdes betydelsefull. Information om egenvård uppfattades av informanterna som viktigt och som ett stöd i det dagliga livet.

Mother’s experiences and perceptions of a continuous caring model with fathers after caesarean section : a qualitative study

Background: In Chile, mothers and newborns are separated after caesarean sections. The caesarean section rate in Chile is approximately 40%. Once separated, newborns will miss out on the benefits of early contact unless a suitable model of early newborn contact after caesarean section is initiated. Aim: To describe mothers experiences and perceptions of a continuous parental model of newborn care after caesarean section during mother-infant separation. Methods: A questionnaire with 4 open ended questions to gather data on the experiences and perceptions of 95 mothers in the obstetric service of Sótero Del Rio Hospital in Chile between 2009 and 2012. Data were analyzed using qualitative content analysis. Results: One theme family friendly practice after caesarean section and four categories. Mothers described the benefits of this model of caring. The fathers presence was important to mother and baby. Mothers were reassured that the baby was not left alone with staff. It was important for the mothers to see that the father could love the baby as much as the mother. This model of care helped create ties between the father and newborn during the period of mother-infant separation and later with the mother. Conclusions: Family friendly practice after caesarean section was an important health care intervention for the whole family. This model could be stratified in the Chilean context in the case of complicated births and all caesarean sections. Clinical Implications: In the Chilean context, there is the potential to increase the number of parents who get to hold their baby immediately after birth and for as long as they like. When the mother and infant are separated after birth, parents can be informed about the benefits of this caring model. Further research using randomized control trials may support biological advantages.

Machine translation and the disruption of foreign language learning activities

This study examines the question of how language teachers in a highly technology-friendly university environment view machine translation and the implications that this has for the personal learning environments of students. It brings an activity-theory perspective to the question, examining the ways that the introduction of new tools can disrupt the relationship between different elements in an activity system. This perspective opens up for an investigation of the ways that new tools have the potential to fundamentally alter traditional learning activities. In questionnaires and group discussions, respondents showed general agreement that although use of machine translation by students could be considered cheating, students are bound to use it anyway, and suggested that teachers focus on the kinds of skills students would need when using machine translation and design assignments and exams to practice and assess these skills. The results of the empirical study are used to reflect upon questions of what the roles of teachers and students are in a context where many of the skills that a person needs to be able to interact in a foreign language increasingly can be outsourced to laptops and smartphones.