Importance of canopy porosity into vineyard and the relationship with the grape maturity. Digital estimation method

In warm and dry climates, the use of porous systems should be required in order to allow a better leaf distribution inside the plant, causing more space in the clusters area and enhancing determined physiological processes so in the leaf (photosynthesis, ventilation, transpiration) as in berry (growth and maturation). Plant geometry indexes, yield and must composition have been studied in three different systems: sprawl with 12 shoots/m (S1); sprawl system with 18 shoots/m (S2) and vertical positioned system or VSP with 12 shoots/m (VSP1). Total leaf area increases as the crop load does, whoever surface area depends on to two factors: crop load and the training system (VSP vs . sprawl), which can provide differences in leaf exposure efficiencies. The main objective of this study was to validate digital photography measurements used to compare porosity differences among treatments and, as they affect plant microclimate and, therefore, yield and berry quality. Also, all previous studied indexes (LAI, SA, SFEr) tended to overestimate the relationship between exposed leaf surface and porosity of each treatment, but the use of digital method proved to be an effective tool in order to assess canopy porosity. Results showed that not positioned and free systems (sprawl) scored between 25 - 50% more porosity in the clusters area than the fixed vertical system (VSP), which resulted in a better plant microclimate for test conditions, mainly by improving the exposure of internal clusters and internal canopy ventilation. On the other hand, higher crop load treatment (S2) showed a real increase in yield (16%) without any relevant change into must composition, even improving total anthocyanin content into berry during ripening

Detecting changes in the basin of attraction of a dynamical system: Application to the postural restoring system

A method that provides athree-dimensional representation ofthe basin ofattraction of a dynamical system from experimen tal data was applied tothe problem ofdynamic balance restoration. The method isbased onthe density ofthe data onthe phase space ofthe system under study and makes use ofmodeling and numerical curve fittingtools.For the dynamical system ofbalance restora tion,the shape and the size of the basin of attraction depend on the dynamics of the postural restoring mechanisms and contain important information regarding the biomechanical,as well as the neuromuscular condition of the individual. The aim ofthis work was toexamine the ability ofthe method todetect, through the observed changes inthe shape and/or the size ofthe calculated basins of attraction, (a)the inherent differences between different systems (in the current application, postural restoring systems of different individuals)and (b)induced chan ges in the same system (thepostural restoring system of an individual).The results ofthe study confirm the validity of the method and furthermore justify its robustness.

Flexible low-cost system to test batteries and ultracapacitors for electric and hybrid vehicles in real working conditions

Batteries and ultracapacitors for hybrid and electric vehicles must satisfy very demanding working conditions that are not usual in other applications. In this sense, specific tests must be performed in order to draw accurate conclusions about their behaviour. To do so, new advanced test benches are needed. These platforms must allow the study of a wide variety of energy storage systems under conditions similar to the real ones. In this paper, a flexible, low-cost and highly customizable system is presented. This system allows batteries and ultracapacitors to be tested in many and varied ways, effectively emulating the working conditions that they face in an electric vehicle. The platform was specifically designed to study energy storage systems for electric and hybrid vehicles, meaning that it is suitable to test different systems in many different working conditions, including real driving cycles. This flexibility is achieved keeping the cost of the platform low, which makes the proposed test bench a feasible alternative for the industry. As an example of the functionality of the platform, a test consisting of a 17-minute ARTEMIS urban cycle with a NiMH battery pack is presented.

A language exchange program: sustainability innovation in language and culture engagement

The Language Exchange Program between the UPM and UBCO acts as a model for sustainability innovation in language and culture engagement as the students can interact with native speakers in communication tasks. This interdisciplinary initiative supports the latest methodological principles observed in the Common European Framework for Languages [1], such as autonomous and lifelong learning, self-assessment and peer-assessment as well as the incorporation of new technologies to the learning process

Technical evolution of 3d modular construction from the nineteenth century to world war II

3D Modular construction is poorly known and scarcely published in technical literature. In spite of that there are an increasing number of manufacturers offering their products in different countries. This method has largely evolved from early examples such as the American Gold Rush prefabrication in the nineteenth century, the Sears precut homes or Voisin´s prototypes for modular homes, to the end of the first half of the twentieth century. In this period a non negligible number of attempts in 3D modular construction have been carried out, ranging from theoretical proposals to several hundred or thousand units produced. Selected examples of modular architecture will be analyses in order to illustrate its technical evolution, concerning materials, structure, transportation and on site assembly. Success and failure factors of the different systems will be discussed. Conclusions about building criteria shown in them and their applicability in current architecture will be drawn.

Analysis of the suitability of existing medical ontologies for building a scalable semantic interoperability solution supporting multi-site collaboration in oncology

Semantic interoperability is essential to facilitate efficient collaboration in heterogeneous multi-site healthcare environments. The deployment of a semantic interoperability solution has the potential to enable a wide range of informatics supported applications in clinical care and research both within as ingle healthcare organization and in a network of organizations. At the same time, building and deploying a semantic interoperability solution may require significant effort to carryout data transformation and to harmonize the semantics of the information in the different systems. Our approach to semantic interoperability leverages existing healthcare standards and ontologies, focusing first on specific clinical domains and key applications, and gradually expanding the solution when needed. An important objective of this work is to create a semantic link between clinical research and care environments to enable applications such as streamlining the execution of multi-centric clinical trials, including the identification of eligible patients for the trials. This paper presents an analysis of the suitability of several widely-used medical ontologies in the clinical domain: SNOMED-CT, LOINC, MedDRA, to capture the semantics of the clinical trial eligibility criteria, of the clinical trial data (e.g., Clinical Report Forms), and of the corresponding patient record data that would enable the automatic identification of eligible patients. Next to the coverage provided by the ontologies we evaluate and compare the sizes of the sets of relevant concepts and their relative frequency to estimate the cost of data transformation, of building the necessary semantic mappings, and of extending the solution to new domains. This analysis shows that our approach is both feasible and scalable.

Engineering optimisations in query rewriting for OBDA

Ontology-based data access (OBDA) systems use ontologies to provide views over relational databases. Most of these systems work with ontologies implemented in description logic families of reduced expressiveness, what allows applying efficient query rewriting techniques for query answering. In this paper we describe a set of optimisations that are applicable with one of the most expressive families used in this context (ELHIO¬). Our resulting system exhibits a behaviour that is comparable to the one shown by systems that handle less expressive logics.

Evaluación de la sostenibilidad de sistemas de construcción industrializados de fachada en edificios de vivienda colectiva

Esta tesis parte de una reflexión sobre la integración de la construcción industrializada en la arquitectura y el desarrollo sostenible de nuestro planeta y, más concretamente, de la inquietud de querer comparar los diferentes sistemas de construcción industrializados bajo el punto de vista de su sostenibilidad. Supone una introspección en la industrialización sostenible de la construcción en cuanto a la conservación de energía y los recursos naturales, la reutilización de estos recursos y la gestión del ciclo de vida de los materiales y componentes utilizados. Las consideraciones se refieren tanto a aspectos concernientes a los materiales empleados, como a las tecnologías utilizadas, gestión de los edificios y su disposición final, para obtener una mayor eficiencia energética de los edificios y las técnicas de construcción. El estudio se concreta en el desarrollo un marco teórico para la investigación de la sostenibilidad de los sistemas industrializados de fachadas en edificios de vivienda colectiva en España; desarrollando una herramienta que permite, por un lado, guiar a los diferentes agentes en el diseño de sistemas constructivos de fachada con las mejores prácticas de sostenibilidad y, por otro lado, evaluar la sostenibilidad de los sistemas constructivos de una forma objetiva. Por último, se lleva a cabo la evaluación y comparación de once ejemplos de sistemas de fachadas realizados en España en los últimos años. Esto ha permitido emitir juicios críticos soportados por una base fáctica sobre el grado de sostenibilidad de unos sistemas con respecto a otros, realizando un análisis del estado actual del sector de la construcción de fachadas en vivienda colectiva en España, concluyendo en unas directrices que permitan mejorar los sistemas existentes. ABSTRACT The starting point of this thesis is a reflection on the integration of industrialized building and sustainable development concepts. This integration is specifically focused on providing a framework for comparing different systems of industrialized components used in the construction of collective housing, from the point of view of sustainability. Consequently, it involves research on the sustainable industrialization of construction in regards to energy conservation and natural resources, reuse of these resources and life cycle management of materials and components. These considerations refer to both the aspects concerning the materials used, and to the technologies applied to achieve greater energy efficiency in buildings and construction techniques. In tune with this, this thesis puts forward a theoretical framework for the research of sustainability of industrialized façade systems used in collective housing in Spain, leading to the development of a tool for design and assessment that can potentially be applied to any system. This analytical framework is then used to evaluate ten examples of façade systems made in Spain in recent years, therefore providing a factual basis to comparatively determine the degree of sustainability of existing solutions. Moreover, the implementation of this tool also allows to analyse the current state of the sector of façade construction for collective housing in Spain, as well as to propose several guidelines for the improvement of existing systems.

Implementación de un entorno de mantenimiento centralizado para el diagnóstico y aislamiento de fallos en plataformas de sistemas modulares

En la actualidad gran parte de las industrias utilizan o desarrollan plataformas, las cuales integran un número cada vez más elevado de sistemas complejos. El mantenimiento centralizado permite optimizar el mantenimiento de estas plataformas, por medio de la integración de un sistema encargado de gestionar el mantenimiento de todos los sistemas de la plataforma. Este Trabajo Fin de Máster (TFM) desarrolla el concepto de mantenimiento centralizado para sistemas complejos, aplicable a plataformas formadas por sistemas modulares. Está basado en la creciente demanda de las diferentes industrias en las que se utilizan este tipo de plataformas, como por ejemplo la industria aeronáutica, del ferrocarril y del automóvil. Para ello este TFM analiza el Estado del Arte de los sistemas de mantenimiento centralizados en diferentes industrias, además desarrolla los diferentes tipos de arquitecturas de sistemas, las técnicas de mantenimiento aplicables, así como los sistemas y técnicas de mantenimiento basados en funciones de monitorización y auto diagnóstico denominadas Built-In-Test Equipment (BITE). Adicionalmente, este TFM incluye el desarrollo e implementación de un modelo de un Entorno de Mantenimiento Centralizado en LabVIEW. Este entorno está formado por el modelo de un Sistema Patrón, así como el modelo del Sistema de Mantenimiento Centralizado y la interfaces entre ellos. El modelo del Sistema de Mantenimiento Centralizado integra diferentes funciones para el diagnóstico y aislamiento de los fallos. Así mismo, incluye una función para el análisis estadístico de los datos de fallos almacenados por el propio sistema, con el objetivo de proporcionar capacidades de mantenimiento predictivo a los sistemas del entorno. Para la implementación del modelo del Entorno de Mantenimiento Centralizado se han utilizado recursos de comunicaciones vía TCP/IP, modelización y almacenamiento de datos en ficheros XML y generación automática de informes en HTML. ABSTRACT. Currently several industries are developing or are making use of multi system platforms. These platforms are composed by many complex systems. The centralized maintenance allows the maintenance optimization, integrating a maintenance management system. This system is in charge of managing the maintenance dialog with the different and multiple platforms. This Master Final Project (TFM) develops the centralized maintenance concept for platforms integrated by modular and complex systems. This TFM is based on the demand of the industry that uses or develops multi system platforms, as aeronautic, railway, and automotive industries. In this way, this TFM covers and analyzes several aspects of the centralized maintenance systems like the State of the Art, for several industries. Besides this work develops different systems architecture types, maintenance techniques, and techniques and systems based on Built-in-test Equipment functions. Additionally, this TFM includes a LabVIEW Centralized System Environment model. This model is composed by a Standard System, the Centralized Maintenance System and the corresponding interfaces. Several diagnostic and fault isolation functions are integrated on the Centralized Maintenance Systems, as well a statistic analysis function, that provides with predictive maintenance capacity, based on the failure data stored by the system. Among others, the following resources have been used for the Centralized System Environment model development: TCP/IP communications, XML file data modelization and storing, and also automatic HTML reports generation.

Integrated plant monitoring to improve plant operation strategy and results

The more and more demanding conditions in the power generation sector requires to apply all the available technologies to optimize processes and reduce costs. An integrated asset management strategy, combining technical analysis and operation and maintenance management can help to improve plant performance, flexibility and reliability. In order to deploy such a model it is necessary to combine plant data and specific equipment condition information, with different systems devoted to analyze performance and equipment condition, and take advantage of the results to support operation and maintenance decisions. This model that has been dealt in certain detail for electricity transmission and distribution networks, is not yet broadly extended in the power generation sector, as proposed in this study for the case of a combined power plant. Its application would turn in direct benefit for the operation and maintenance and for the interaction to the energy market

La protección civil municipal: análisis de los distintos tipos de gestión y propuesta metodológica de planificación

Mediante la elaboración de esta tesis doctoral se pretende diseñar un sistema para la realización del plan de autoprotección en industrias con riesgo de incendio dentro de un polígono industrial. Para desarrollar esta línea de investigación se realizará una investigación cartográfica así como un reconocimiento visual de las distintas empresas industriales, de actividades heterogéneas, seleccionadas por su emplazamiento y condiciones. Este tipo de industria es esencial en el sistema económico nacional, ya que dota de recursos y servicios al tejido social, además de tener una relación directa con la generación de riqueza y por tanto incide de forma positiva en el empleo de cualquier región. Estas razones y otras son determinantes para fomentar el progreso, si bien nunca a expensas de la seguridad de los empleados que hacen posible la línea de producción así como de los posibles viandantes que transcurran por la zona de impacto en caso de incidentes como por ejemplo un incendio que afecte a cualquiera de los locales y/o empresas que se emplazen en los denominados polígonos industriales. La tesis incluye trabajos experimentales de los que se extraen recomendaciones y conclusiones encaminadas a la optimización de la instrumentalización utilizada, las técnicas de observación, diseño y cálculo necesarias que determinarán el acercamiento al método propuesto para nuestra valoración del riesgo por incendio. Las posibles emergencias que pueden darse a nivel de industrias localizadas en polígonos industriales son diversas y numerosas. De todas ellas se elige abordar el caso de “incendio” por su casuística más numerosa. No obstante, la planificación orientada desde el prisma de la investigación de esta tesis puede estenderse a cualquier otro riesgo, lo que se aportará como líneas futuras de investigación. Las aproximaciones y etapas de los trabajos que forman parte de esta investigación se han integrado en cada capítulo y son las siguientes: En primer lugar un capítulo de Introducción, en el que se realiza una reflexión justificada de la elección del tema tratado, se formula la hipótesis de partida y se enumeran los distintos objetivos que se pretenden alcanzar. En el segundo capítulo, titulado Aspectos de la Protección Civil en la Constitución Española de 1978, se ha realizado un estudio exhaustivo de la Constitución en todo lo relacionado con el ámbito de la protección, haciendo especial énfasis en las distintas competencias según el tipo de administración que corresponda en cada caso, así como las obligaciones y deberes que corresponden a los ciudadanos en caso de catástrofe. Así mismo se analizan especialmente los casos de Guerra y el estado de Alarma. En el tercer capítulo, titulado Repuesta de las administraciones públicas ante emergencias colectivas, se trata de formular el adecuado sistema de repuesta que sería preciso para tratar de mitigar desastres y catástrofes. Se analizan los distintos sistemas de gestión de emergencias constatando en cada caso los pros y los contras de cada uno. Se pretende con ello servir de ayuda en la toma de decisiones de manera coherente y racional. El capítulo cuarto, denominado Planes Locales de emergencia. Estudio en las distintas administraciones, se ha pormenorizado en la presentación así como puesta en funcionamiento de los planes, comparando los datos obtenidos entre ellos para concluir en un punto informativo que nos lleva a la realidad de la planificación. Para la realización y desarrollo de los capítulos 5 y 6, llamados Análisis de la Norma Básica de Autoprotección y Métodos de evaluación del riesgo de Incendio, se estudia la normativa actual en autoprotección prestando atención a los antecedentes históricos así como a todas las figuras que intervienen en la misma. Se analizan los distintos métodos actuales para la valoración del riesgo por incendio en industrias. Este aspecto es de carácter imprescindible en la protección civil de los ciudadanos pero también es de especial importancia en las compañías aseguradoras. En el capítulo 7, Propuesta metodológica, se propone y justifica la necesidad de establecer una metodología de estudio para estos casos de riesgo por incendio en industrias para así, acortar el tiempo de respuesta de los servicios de emergencia hasta la zona, así como dotar de información imprescindible sobre el riesgo a trabajadores y transeúntes. El último capítulo se refiere a las Conclusiones, donde se establecen y enuncian una serie de conclusiones y resultados como consecuencia de la investigación desarrollada, para finalizar esta tesis doctoral enunciando posibles desarrollos y líneas de investigación futuros. ABSTRACT The development of this thesis is to design a system for the implementation of the plan of self-protection in industries with risk of fire in an industrial park. To develop this line of research will be done cartographic research as well as visual recognition of the distinct and heterogeneous industrial companies selected by its location and conditions. This type of industry is an essential part in the economic national system providing economic resources to society as well as with a direct relationship in unemployment. For this reason it is crucial to promote their progress, but never at the expense of the security of the employees that make the line of production as well as possible walkers that pass by the area of impact in the event of a fire affecting the company. The thesis includes experimental works which are extracted recommendations and conclusions aimed at optimization of used exploit, techniques of observation, design and calculation needed to determine the approach to the method proposed for our assessment of the risk from fire. The approaches and stages of works that are part of this research have been integrated into each chapter and are as follows: In the first chapter, holder introduction, perform a supporting reflection of the choice of the subject matter, is formulated the hypothesis of departure and listed the different objectives that are intended to achieve. In the second chapter, holder aspects of Civil Protection in the Spanish Constitution of 1978, examines an exhaustive study of the Constitution in everything related to the scope of protection. With an emphasis on individual skills according to the type of management with corresponding in each case, as well as the obligations and duties which correspond to citizens in the event of a catastrophe. Also analyzes the particular cases of war and the State of alarm. In the third chapter, holder public administrations collective emergency response, discussed trafficking in defining the proper system response that would be precise to address disasters and catastrophes. We discusses the different systems of emergency management in each case, we pretend the pros and cons of each. We tried that this serve as decision-making aid coherent and rational way. The fourth chapter is holder Local Emergency Plans (LEP). Study on the different administrations, has detailed in the presentation as well as operation of the LEP, comparing the data between them to conclude in an information point that leads us to the reality of planning. For the realization and development of chapters 5 and 6, holder Analysis of the basic rule of self-protection and fire risk assessment methods, paying attention to the historical background as well as all the figures involved in the same studies with the current rules of self-protection. The current methods for the estimation of the risk are analyzed by fire in industries. This aspect is essential in the civil protection of the citizens, but it is also of special importance for insurance companies. The seventh chapter, holder Methodological proposal, we propose and justifies the need to establish a methodology for these cases of risk by fire in industries. That shorts the response time of emergency services to the area, and provides essential information about the risk to workers and walkers. The last chapter refers to the Conclusions, laying down a series of results as a consequence of the previous chapters to complete billing possible developments and research future.

Análisis y reducción del riesgo de explosión por incendio en los almacenes de pirotecnia

Un incendio en el interior de un almacén de pirotecnia puede provocar la iniciación más o menos simultánea de los artículos existentes en su interior, con su consecuente onda de choque potenciada por la presión de los propios gases generados en su interior. La finalidad de esta tesis doctoral consiste en analizar los fenómenos que se desarrollan como consecuencia de un incendio interior en los almacenes de pirotecnia y establecer posibles medidas eficaces de prevención y protección con objeto de reducir el riesgo de explosión.. Inicialmente se llevó a cabo un análisis del riesgo de explosión, evaluando las consecuencias en caso de producirse un fuego interior. Los resultados fueron catastróficos. Finalmente, y con objeto de minimizar la posibilidad de producirse un incendio en el interior de un almacén, se evaluaron diferentes sistemas de detección y extinción automática de incendios para almacenes pirotécnicos, realizándose pruebas a escala real. En particular, la presente tesis consta de los siguientes trabajos: 1) Evaluación de la sobrepresión generada por la explosión de artificios pirotécnicos en el interior de almacenes, mediante pruebas de explosión de artículos pirotécnicos, con el fin de evaluar las posibles consecuencias en caso de materializarse una explosión, y disponer de información que permita conocer el grado de resistencia de las estructuras de los almacenes, así como el diseño adecuado de las mismas para soportar los efectos de tales explosiones. 2) Evaluación del efecto de un incendio en el interior de un almacén de pirotecnia mediante pruebas a escala real, con el fin de evaluar la posibilidad de la iniciación simultánea de los artículos pirotécnicos almacenados en su interior, y su consecuente explosión, así como las consecuencias en caso de materializarse la explosión. 3) Análisis de sistemas de detección y extinción automática de incendios para almacenes de pirotecnia, mediante la realización de pruebas a escala real para verificar la eficiencia y eficacia de tales sistemas y agentes para sofocar un incendio pirotécnico de forma tal que se evite la posible explosión asociada. 4) Evaluación de nuevos agentes extintores utilizados en los sistemas de extinción automática de incendios, que actualmente se están utilizando en el sector pirotécnico nacional, mediante la realización de pruebas a escala real. Los resultados obtenidos han permitido al Ministerio de Industria, Energía y Turismo actualizar la reglamentación vigente aplicable (Instrucción Técnica Complementaria número 17 del Reglamento de artículos pirotécnicos y cartuchería, aprobado por el Real Decreto 563/2010, de 7 de mayo). ABSTRACT A fire inside a pyrotechnics magazine can cause the more or less simultaneous initiation of the stored articles, with the wave of shock that is produced promoted by the pressure of the gases generated in its interior. The purpose of this PhD thesis is to analyze the phenomena that develop as a result of a fire inside the pyrotechnics stores and establish possible effective prevention and protection measures to reduce the risk of explosionAn analysis of the risk of explosion and fire consequences in a pyrotechnic magazine, testing to real scale, was initially carried out. The results were catastrophic. Finally, and in order to minimize the possibility of a fire inside a pyrotechnic magazine, different systems of detection and automatic extinction of fires in pyrotechnic magazines were evaluated, testing to real scale. Particularly, this thesis has the following parts: 1) Evaluation of the pressure generated by the pyrotechnic explosion in a magazine, with explosión tests of pyrotechnic articles, in order to evaluate the possible consequences in case of materialize an explosion, and provide information to know the resistance grade of the magazine structures, as well as the right design of those to withstand the effects of such explosions. 2) Evaluation of the effect of a fire inside a pyrotechnic magazine by full-scale tests, in order to evaluate the possibility of simultaneous initiation of the pyrotechnic articles stored inside, and the resulting explosion, as well as the consequences in case of materialize an explosion. 3) Analysis and evaluation of detection and automatic fire extinguishing in pyrotechnic magazines, by full-scale tests in order to verify the efficiency and effectiveness of such systems and agents to quell a pyrotechnic fire and avoid the posible mass explosion. 4) Evaluation of new extinguishing agent used in automatic fire extinguishers, which are currently being used in the national fireworks industry, by full-scale tests. The results obtained have allowed the Ministry of Industry, Energy and Tourism, update the current regulation (Complementary Technical Instruction 17 of the Regulation of Pyrotecnic Articles and Ammunition, approved by the Royal Decree 563/2010, of May 7).

Escuela en Hunstanton de A+P Smithson: el Nuevo Brutalismo en Inglaterra

La tesis estudia en detalle la Hunstanton Secondary School y su trascendencia. Así, se trata de analizar el conjunto de procesos que hace que esta obra sea entendida como el manifiesto construido del Nuevo Brutalismo en Inglaterra. La Escuela en Hunstanton fue la primera obra proyectada y construida por los Smithson y, si se considera que el legado que dejaron Alison y Peter fue más de carácter teórico que constructivo, ésta se ha convertido en un edificio relevante dentro de su trayectoria profesional. Además, el rigor con el que fue realizado el proyecto y la ratificación de las ideas que subyacían tras él, a pesar del extenso intervalo temporal que caracterizó su proceso constructivo, hacen que esta obra se convierta en una síntesis de la filosofía arquitectónica gestada en Inglaterra tras la guerra. Por otro lado, hay que contemplar que la sencillez del lenguaje constructivo empleado, viene dada por la compleja reiteración de los sistemas proyectuales tipo que formulan para este proyecto y el establecimiento de una gramática casi matemática. La sistematización de su vocabulario hace que, tras el análisis de su arquitectura, se encuentren nuevos parámetros capaces de documentar este momento de la historia de la arquitectura en Inglaterra. La envolvente del edificio constituye al tiempo fachada y estructura. Esta característica ha pasado inadvertida cuando, en numerosas ocasiones y durante seis décadas, se han venido publicando las fotografías de la obra terminada y los dibujos que los Smithson habían realizado en la fase de proyecto. Como consecuencia, ha proliferado el conocimiento de la arquitectura de la escuela a un nivel más superficial, mostrando el resultado formal de la misma y con ello, simplemente se ha dejado intuir la gran influencia que Mies Van der Rohe provocó en los Smithson en los primeros años de desarrollo de su labor como arquitectos. El objetivo principal de esta tesis es, por tanto, facilitar el entendimiento del espacio que propusieron los Smithson a partir del análisis pormenorizado de los distintos sistemas constructivos empleados y del equipo personal que se vio implicado en su construcción. Para ello, es necesario abordar el estudio de los materiales y mecanismos proyectuales que hicieron posible que este conjunto de espacios –interiores y exteriores- resultase definido a través de la relación entre dos variables: una evidente austeridad en la utilización de los materiales y la combinación de los distintos sistemas intervinientes a partir del recurso de la repetición. La Escuela de Hunstanton, a pesar de las inoportunas intervenciones realizadas para adaptar el centro a unas necesidades derivadas de su número de alumnos actual (el doble que en su inicio), continúa proclamando su integridad espacial. Partiendo de la hipótesis de que la arquitectura de la Secondary School en Hunstanton, representa el manifiesto construido del Nuevo Brutalismo en Inglaterra, se concluye que el resultado de su construcción fue consecuencia de numerosas influencias que, en relación con los Smithson, estuvieron presentes durante los años en que se gestó. Algo que va más allá de la conclusión de aquellos debates arquitectónicos que se habían emprendido, por escrito, en las distintas revistas locales de arquitectura. Los mecanismos compositivos empleados, también habían tenido mucho que ver con lo que los historiadores del arte habían venido aportando a la historia de la arquitectura hasta ese momento. Desde los años 40, éstos últimos habían emprendido una nueva manera de contar la historia en la que quedaba fuertemente involucrada su capacidad crítica, provocando interferencias en la mentalidad de los arquitectos de nueva generación y otorgándoles un bagaje cultural subliminalmente determinado y subjetivo. Por supuesto, en el resultado arquitectónico final, también tuvieron mucho que ver los recursos materiales de que se disponía en aquel momento. Así como la optimización de los mismos a través de la adopción de nuevas metodologías de trabajo como puede ser la organización multidisciplinar. La inclusión del ingeniero Ronald Jenkins en el equipo de trabajo de los Smithson supuso una gran oportunidad. Este ingeniero, propuso poner en práctica la entonces innovadora Teoría Plástica en la metodología de cálculo estructural y, con ello consiguió enriquecer el resultado espacial, posibilitando la percepción de una arquitectura ligera –a pesar de sus grandes dimensiones- y vinculada al paisaje donde se inserta. Pero todos estos condicionantes fueron pasados a su vez por el filtro del deseo de una regeneración social, que buscaba el modelo de la sociedad americana. El Buen Vivir que propugnaban los americanos, viajaba a Europa de la mano de la publicidad. Y, al igual que la componente publicitaria tuvo algo que ver en el proceso creativo de la arquitectura de la escuela, también lo tuvo el conocimiento del arte pop y sus recursos compositivos. ABSTRACT The thesis examines in detail the project of Hunstanton Secondary School and the architectural language’s significance used in it. Thus, it is reinterpreting the set of processes that makes this work to be understood as the “built manifesto” of the English New Brutalism. Hunstanton School’s project was the first work designed and built by the Smithsons and, considering their legacy -more theoretical than constructed-, make of this building an important work within their career. In addition, the rigor with which it was carried out the project and the ratification of the ideas lying behind him, make this work becomes a synthesis of the architectural philosophy gestated in England after the war, despite the extensive time interval that characterized its construction process. On the other hand, it must be considered the simplicity of the constructive language used in this project. It is given by the complex projective repetition of the type systems and by the establishment of a quasi-mathematical grammar. The systematization of its vocabulary makes, after a deep analysis of its architecture, to recognize new parameters able to document this moment in the history of English architecture. The building envelope is, at the same time, facade and structure. This feature has been overlooked when many photographs of the finished work and its drawings -made by the Smithsons during the design phase- has been exposed over six decades. As a result, it has proliferated the knowledge of Hunstanton Secondary Modern School’s architecture as a more superficial level, just by showing the formal outcome of its project and thus simply been left the sensation of the great influence that Mies Van der Rohe provocated in the Smithson thinking during their first years of developing his work as architects. Therefore, the main objective of this thesis is to facilitate an understanding of the Smithsons’ proposed space. This is made possible through the detailed analysis of the different systems used in it and, by understanding the knowledge of the team involved in its construction. To prove this, it is necessary to pay attention to the study of the materials and to different project mechanisms that make possible to this group of spaces -inner and outer- be defined through the game played by two variables: an apparent austerity in the use of materials and the combination of the various participant systems through the resource of repetition. Despite the untimely interventions made in order to adapt the center to the new needs (the large increase in the number of students), Hunstanton School’s building continues proclaiming its spatial integrity. Assuming that Hunstanton Secondary School’s architecture represents the manifesto of New Brutalism in England, it is concluded that the result of its construction was the result of numerous influences that, in connection with the Smithsons, were present during the years in which its project was conceived. This meaning goes beyond the conclusions made from the architectural debate that was published in many of local architectural magazines. The compositional mechanisms employed, are also linked to what art historians had contributed to the history of architecture until then. Since the 40s, historians had undertaken a new way to tell History. This new mode strongly implied its critical capacity. All this, was causing interferences in the mentality of the architects of the new generation and, giving them a subliminally determined and very subjective cultural background. Of course, the final architectural result had much to do with the material resources available at that time and, with its optimization through the adoption of new working methods as the multidisciplinary organization. The inclusion of engineer Ronald Jenkins in the team of the Smithsons was a great opportunity. He proposed to implement the new Plastic Theory in the structural calculation and thereby he got enrich the spatial results achieved, by enabling the perception of a lightweight construction, despite its large size and, linked to the landscape where it is inserted. But all these conditions were passed through the filter of social regeneration’s desire, following the American society’s model. This American model travelled to Europe in the hands of advertising. And, in the same way that publicity had something to do with the creative process of this architecture, also had a lot to do the knowledge of pop art and its compositional resources.

Concepções e práticas de avaliação de professores de ciências físico-químicas do ensino básico

Este estudo teve como objetivo caracterizar as concepções e práticas de avaliação de professores portugueses de Ciências Físico-Químicas do ensino básico e conhecer como estes integram a avaliação nas suas aulas no contexto de uma reorganização curricular. Realizaram-se três estudos de caso, em que participaram professores com menos de três anos de serviço. A recolha de dados consistiu na observação naturalista de aulas, entrevistas semiestruturadas e documentos fornecidos pelos participantes. Os resultados evidenciam duas concepções de avaliação das aprendizagens: avaliação da aprendizagem e avaliação para a aprendizagem. Um dos participantes evidencia uma concepção de avaliação da aprendizagem, valorizando uma avaliação de natureza sumativa. Os professores com uma concepção sobre avaliação para a aprendizagem promovem uma avaliação orientada para a melhoria das aprendizagens, valorizando o carácter formativo da avaliação. Relativamente às práticas avaliativas dos três participantes, verificou-se que os critérios de avaliação não são explicitados aos alunos, o feedback é pouco frequente e os alunos têm um papel reduzido no processo de avaliação. Todos os professores demonstram dificuldades na avaliação das competências atitudinais e processuais, sendo que, apenas um dos participantes elabora registos de observação para avaliar estas competências. Os testes constituem o principal instrumento de avaliação nas aulas dos professores participantes neste estudo, o que é coerente com uma concepção de ensino e aprendizagem ainda, marcadamente tradicional.

Proteolytic Processing and Ca2+-binding Activity of Dense-Core Vesicle Polypeptides in Tetrahymena

Formation and discharge of dense-core secretory vesicles depend on controlled rearrangement of the core proteins during their assembly and dispersal. The ciliate Tetrahymena thermophila offers a simple system in which the mechanisms may be studied. Here we show that most of the core consists of a set of polypeptides derived proteolytically from five precursors. These share little overall amino acid identity but are nonetheless predicted to have structural similarity. In addition, sites of proteolytic processing are notably conserved and suggest that specific endoproteases as well as carboxypeptidase are involved in core maturation. In vitro binding studies and sequence analysis suggest that the polypeptides bind calcium in vivo. Core assembly and postexocytic dispersal are compartment-specific events. Two likely regulatory factors are proteolytic processing and exposure to calcium. We asked whether these might directly influence the conformations of core proteins. Results using an in vitro chymotrypsin accessibility assay suggest that these factors can induce sequential structural rearrangements. Such progressive changes in polypeptide folding may underlie the mechanisms of assembly and of rapid postexocytic release. The parallels between dense-core vesicles in different systems suggest that similar mechanisms are widespread in this class of organelles.