Produção de mudas de açaí sob diferentes níveis de depleção de água associada a doses de um polímero hidroabsorvente

O açaizeiro é uma palmeira com potencial comercial valorizado principalmente pela polpa do fruto que possui propriedades químicas benéficas à saúde humana. Os produtores necessitam corresponder ao incremento de demanda e a produção de mudas deve contemplar essa tendência de mercado. O conhecimento a respeito do manejo hídrico de mudas da espécie ainda pode ser ampliado e a utilização de polímero hidroabsorvente (hidrogel) na produção de mudas da espécie surge como uma opção para redução de custos em irrigação associada a uma boa qualidade das plantas. O objetivo deste estudo é gerar informações que correlacionem a influência de doses de hidrogel à produção de mudas de açaizeiro em diferentes regimes hídricos. O experimento foi conduzido no Departamento de Engenharia de Biossistemas da Escola Superior de Agricultura \"Luiz de Queiroz\". O delineamento utilizado foi o de blocos ao acaso sob os seguintes tratamentos, quatro doses de hidrogel (0; 1,0; 2,0; 3,0 g L-1) e três níveis de depleção (0-5; 25; 50% da capacidade de retenção de água do substrato com o polímero) com quatro repetições. O experimento foi conduzido por 9 meses e ao final foram realizadas avaliações biométricas e análises destrutivas para obtenção de valores de massa seca. Para embasamento estatístico dos dados aplicou-se o teste F, em 1 e 5% de probabilidade, análise de regressão polinomial e o teste de Tukey em 5% de probabilidade. O hidrogel aumentou a capacidade de retenção hídrica do substrato e os resultados mostraram que a presença do polímero acrescentou qualidade à muda de forma crescente em função das doses; todavia, doses de 3g L-1 podem acarretar problemas com drenagem devido à perda de eficiência de absorção do polímero. Os níveis de depleção (25 e 50%) afetaram substancialmente, de forma negativa, o desempenho da muda quando comparados ao tratamento de menor depleção (0-5%), demonstrando que a espécie é bastante sensível a regimes com menor disponibilidade hídrica. Não foi observado efeito de interação entre as doses do polímero e os níveis de depleção para a grande maioria das variáveis analisadas, com exceção apenas da área foliar específica (AFE) e da irrigação aplicada (IA). O Kc médio da cultura, para cultivo protegido, apresentou tendência crescente ao longo do experimento. Conclui-se que a melhor dose do polímero é de 2 g L-1 e que o nível de depleção de 0-5% apresentou o melhor desempenho. O Kc determinado mostra tendência de acordo com a fase de desenvolvimento da espécie, variando de 0,76 até 1,41.

Mini-toletes de cana-de-açúcar: gemas, biorreguladores, adubação nitrogenada e déficit hídrico

A cana-de-açúcar é uma espécie amplamente cultivada em regiões tropicais e subtropicais. Sua propagação é realizada através do plantio de porções caulinares contendo uma média de três gemas. Tal prática requer grande quantidade de material vegetal, o que reduz o ganho dos produtores. Adicionalmente, a utilização de grande quantidade de material vegetal para o plantio dificulta algumas práticas em relação ao manejo da cultura, como transporte e armazenamento. A utilização de mini-toletes, contendo uma única gema, representa uma alternativa ao plantio convencional. Existem limitações impostas à utilização de mini-toletes, relacionadas à baixa disponibilidade de reservas de nutrientes e de água, devido ao reduzido tamanho dos toletes. O presente trabalho teve o objetivo de avaliar o vigor e o desenvolvimento de plantas de cana-de-açúcar provenientes de mini-toletes. No primeiro experimento, comparou-se plantas provenientes de diferentes tipos de propágulos e gemas. Foram avaliados o número de brotações, a porcentagem de brotações, a altura das plantas e as massas de folhas e raízes. No segundo experimento, avaliou-se o efeito da aplicação de biorreguladores em mini-toletes provenientes de gemas apicais e basais. Foram realizadas as determinações do número de brotações, da altura das plantas, da área foliar e das massas secas de folhas e colmos. No terceiro experimento, avaliou-se a aplicação de ureia como fonte de adubação nitrogenada e tiametoxam, um inseticida sistêmico com ação bioativadora, no desenvolvimento de plantas originárias de mini-toletes. Realizaram-se as seguintes determinações: número de brotações, altura das plantas, área foliar e massas secas de colmos, folhas e raízes. No quarto experimento, plantas de cana-de-açúcar originárias de mini-toletes tratados com agroquímicos foram submetidas ao déficit hídrico. Foram avaliadas a altura das plantas, a área foliar e as massas de raiz, folha e caule. Foi possível concluir que plantas provenientes de gemas superiores e de toletes contendo três e duas gemas apresentaram um melhor desenvolvimento. De maneira geral, os resultados indicaram que a cana-de-açúcar não responde de maneira evidente ao uso de reguladores vegetais em mini-toletes. A utilização de ureia aumenta o desenvolvimento de plantas originárias de mini-toletes. Em conjunto com diferentes doses de ureia, a utilização de tiametoxam incrementa aspectos do desenvolvimento da cana-de-açúcar. Adicionalmente, foi possível concluir que a aplicação de agroquímicos em mini-toletes alivia os efeitos negativos do déficit hídrico no desenvolvimento radicular. A partir dos resultados obtidos no presente trabalho, foi possível concluir que a utilização de ureia, tiametoxam e agroquímicos melhora o desenvolvimento de plantas de cana-de-açúcar originárias de mini-toletes.

Carbon assimilation, herbage accumulation, nutritive value, and grazing efficiency of Mulato II brachiariagrass under continuous stocking

Grazed pastures are the backbone of the Brazilian livestock industry and grasses of the genus Brachiaria (syn. Urochloa) are some of most used tropical forages in the country. Although the dependence on the forage resource is high, grazing management is often empirical and based on broad and non-specific guidelines. Mulato II brachiariagrass (Convert HD 364, Dow AgroSciences, São Paulo, Brazil) (B. brizantha × B. ruziziensis × B. decumbens), a new Brachiaria hybrid, was released as an option for a broad range of environmental conditions. There is no scientific information on specific management practices for Mulato II under continuous stocking in Brazil. The objectives of this research were to describe and explain variations in carbon assimilation, herbage accumulation (HA), plant-part accumulation, nutritive value, and grazing efficiency (GE) of Mulato II brachiariagrass as affected by canopy height and growth rate, the latter imposed by N fertilization rate, under continuous stocking. An experiment was carried out in Piracicaba, SP, Brazil, during two summer grazing seasons. The experimental design was a randomized complete block, with a 3 x 2 factorial arrangement, corresponding to three steady-state canopy heights (10, 25 and 40 cm) maintained by mimicked continuous stocking and two growth rates (imposed as 50 and 250 kg N ha-1 yr-1), with three replications. There were no height × N rate interactions for most of the responses studied. The HA of Mulato II increased linearly (8640 to 13400 kg DM ha-1 yr-1), the in vitro digestible organic matter (IVDOM) decreased linearly (652 to 586 g kg-1), and the GE decreased (65 to 44%) as canopy height increased. Thus, although GE and IVDOM were greatest at 10 cm height, HA was 36% less for the 10- than for the 40-cm height. The leaf carbon assimilation was greater for the shortest canopy (10 cm), but canopy assimilation was less than in taller canopies, likely a result of less leaf area index (LAI). The reductions in HA, plant-part accumulation, and LAI, were not associated with other signs of stand deterioration. Leaf was the main plant-part accumulated, at a rate that increased from 70 to 100 kg DM ha-1 d-1 as canopy height increased from 10 to 40 cm. Mulato II was less productive (7940 vs. 13380 kg ha-1 yr-1) and had lesser IVDOM (581 vs. 652 g kg-1) at the lower N rate. The increase in N rate affected plant growth, increasing carbon assimilation, LAI, rates of plant-part accumulation (leaf, stem, and dead), and HA. The results indicate that the increase in the rate of dead material accumulation due to more N applied is a result of overall increase in the accumulation rates of all plant-parts. Taller canopies (25 or 40 cm) are advantageous for herbage accumulation of Mulato II, but nutritive value and GE was greater for 25 cm, suggesting that maintaining ∼25-cm canopy height is optimal for continuously stocked Mulato II.

A essência do Arbutus unedo: caraterização morfológica e genética do medronheiro de Castelo de Paiva

O medronheiro é um arbusto da região mediterrânica que pode ser encontrada por todo o país. Ao contrário do que verifica na região sul do país, no concelho de Castelo de Paiva é atribuída uma reduzida importância económica a esta espécie. Com o intuito de preservar e potenciar a produção desta espécie e contribuir para a dinamização da economia do concelho, procedeu-se à caracterização morfológica e genética de uma amostra da população de medronheiros de Castelo de Paiva. A caracterização morfológica e genética foi realizada para um total de 10 genótipos. Para tal recolheram-se 70 folhas aleatoriamente em cada árvore. Em 40 folhas mediu-se o comprimento, largura, comprimento do pedúnculo, peso fresco, peso seco e determinou-se a área foliar. Dos caracteres morfológicos analisados, aqueles que se revelaram mais úteis na distinção dos vários genótipos foram: comprimento do pedúnculo, peso fresco e peso seco. As restantes 30 folhas foram utilizadas para a caracterização genética. Esta caracterização foi realizada recorrendo a um marcador de DNA, ISSR. Os 5 primeiros exemplaresutilizados na técnica de ISSR demonstraram-se polimórficos. Os resultados da caracterização genética sugerem que a variabilidade genética na população é média a alta.

Effects of plant functional traits on soil stability: intraspecific variability matters

This data set describes different vegetation, soil and plant functional traits (PFTs) of 15 plant species in 30 sampling plots of an agricultural landscape in the Haean-myun catchment in South Korea. We divided the data set into two main tables, the first one includes the PFTs data of the 15 studied plant species, and the second one includes the soil and vegetation characteristics of the 30 sampling plots. For a total of 150 individuals, we measures the maximum plant height (cm) and leaf size (cm**2), which means the leaf surface area for the aboveground compartment of each individual. For the belowground compartment, we measured root horizontal width, which is the maximum horizontal spread of the root, rooting length, which is the maximum rooting depth, root diameter, which is the average root diameter of a the whole root, specific root length (SRL), which is the root length divided by the root dry mass, and root/shoot ratio, which is the root dry mass divided by the shoot dry mass. At each of the 30 studied plots, we estimated three different variables describing the vegetation characteristics: vegetation cover (i.e. the percentage of ground covered by vegetation), species richness (i.e. the number of observed species) and root density (estimated using a 30 cm x 30 cm metallic frame divided into nine 10 cm x 10 cm grids placed on the soil profile), as we calculated the total number of roots that appear in each of the nine grids and then we converted it into percentage based on the root count, following. Moreover, in each plot we estimated six different soil variables: Bulk density (g/cm**3), clay % (i.e. percentage of clay), silt % (i.e. percentage of silt), soil aggregate stability, using mean weight diameter (MWD), penetration resistance (kg/cm**2), using pocket penetrometer and soil shear vane strength (kPa).

Datasets for the graphs of the paper (Fig. 2 to Fig. 7)

Investigating the relationship between factors (climate change, atmospheric CO2 concentrations enrichment, and vegetation structure) and hydrological processes is important for understanding and predicting the interaction between the hydrosphere and biosphere. The Integrated Biosphere Simulator (IBIS) was used to evaluate the effects of climate change, rising CO2, and vegetation structure on hydrological processes in China at the end of the 21st century. Seven simulations were implemented using the assemblage of the IPCC climate and CO2 concentration scenarios, SRES A2 and SRES B1. Analysis results suggest that (1) climate change will have increasing effects on runoff evapotranspiration (ET), transpiration (T), and transpiration ratio (transpiration/evapotranspiration, T/E) in most hydrological regions of China except in the southernmost regions; (2) elevated CO2 concentrations will have increasing effects on runoff at the national scale, but at the hydrological region scale, the physiology effects induced by elevated CO2 concentration will depend on the vegetation types, climate conditions, and geographical background information with noticeable decreasing effects shown in the arid Inland region of China; (3) leaf area index (LAI) compensation effect and stomatal closure effect are the dominant factors on runoff in the arid Inland region and southern moist hydrological regions, respectively; (4) the magnitudes of climate change (especially the changing precipitation pattern) effects on the water cycle are much larger than those of the elevated CO2 concentration effects; however, increasing CO2 concentration will be one of the most important modifiers to the water cycle; (5) the water resource condition will be improved in northern China but depressed in southernmost China under the IPCC climate change scenarios, SRES A2 and SRES B1.

Eddy covariance and environmental data of boreal bogs plant species

In boreal bogs plant species are low in number, but they differ greatly in their growth forms and photosynthetic properties. We assessed how ecosystem carbon (C) sink dynamics were affected by seasonal variations in photosynthetic rate and leaf area of different species. Photosynthetic properties (light-response parameters), leaf area development and areal cover (abundance) of the species were used to quantify species-specific net and gross photosynthesis rates (PN and PG, respectively), which were summed to express ecosystem-level PN and PG. The ecosystem-level PG was compared with a gross primary production (GPP) estimate derived from eddy covariance measurements (EC). Species areal cover rather than differences in photosynthetic properties determined the species with the highest PG of both vascular plants and Sphagna. Species-specific contributions to the ecosystem PG varied over the growing season, which in turn determined the seasonal variation in ecosystem PG. The upscaled growing-season PG estimate, 230 g C/m**2, agreed well with the GPP estimated by the EC, 243 g C/m**2. Sphagna were superior to vascular plants in ecosystem-level PG throughout the growing season but had a lower PN. PN results indicated that areal cover of the species together with their differences in photosynthetic parameters shape the ecosystem-level C balance. Species with low areal cover but high photosynthetic efficiency appear to be potentially important for the ecosystem C sink. Results imply that functional diversity may increase the stability of C sink of boreal bogs.

Growth performance and management of a mixed rainforest tree plantation

Monoculture plantations of Pinus, Eucalyptus and Acacia have been established oil rainforest lands throughout the world. However, this type of reforestation generally supplies low quality timber and contributes to landscape simplification. Alternatives to exotic monoculture plantations are now beginning to gain momentum with farmers and landholders attempting to establish a variety of rainforest trees in small plantations. When compared to the well studied commercial species, knowledge concerning the growth and management of many of these rainforest species is in its infancy. To help expand this limited knowledge base an experimental plantation of 16 rainforest tree species in a randomised design was established near Mt. Mee, in south-eastern Queensland, Australia. Changes in growth, form (based on stem straightness, branch size and branchiness), crown diameters and leaf area of each species were examined over 5 years. Patterns of height growth were also measured monthly for 31 months. Species in this trial could be separated into three groups based on their overall growth after 5 years and their growth patterns. Early successional status, low timber density, high maximum photosynthetic rates and large total leaf areas were generally correlated to rapid height growth. Several species (including Araucaria cunninghamii, Elaeocarpus grandis, Flindersia brayleyana, Grevillea robusta and Khaya nyasica) had above average form and growth, while all species in the trial had considerable potential to have increased productivity through tree selection. As canopy closure occurred at the site between years four and five, growth increments declined. To reduce stand competition a number of different thinning techniques could be employed. However, simple geometric or productivity based thinnings appear to be inappropriate management techniques for this mixed species stand as they would either remove many of the best performing trees or nearly half the species in the trial. Alternatively, a form based thinning would maintain the site's diversity, increase the average form of the plantation and provide some productivity benefits.

Trait physiology and crop modelling as a framework to link phenotypic complexity to underlying genetic systems

New tools derived from advances in molecular biology have not been widely adopted in plant breeding for complex traits because of the inability to connect information at gene level to the phenotype in a manner that is useful for selection. In this study, we explored whether physiological dissection and integrative modelling of complex traits could link phenotype complexity to underlying genetic systems in a way that enhanced the power of molecular breeding strategies. A crop and breeding system simulation study on sorghum, which involved variation in 4 key adaptive traits-phenology, osmotic adjustment, transpiration efficiency, stay-green-and a broad range of production environments in north-eastern Australia, was used. The full matrix of simulated phenotypes, which consisted of 547 location-season combinations and 4235 genotypic expression states, was analysed for genetic and environmental effects. The analysis was conducted in stages assuming gradually increased understanding of gene-to-phenotype relationships, which would arise from physiological dissection and modelling. It was found that environmental characterisation and physiological knowledge helped to explain and unravel gene and environment context dependencies in the data. Based on the analyses of gene effects, a range of marker-assisted selection breeding strategies was simulated. It was shown that the inclusion of knowledge resulting from trait physiology and modelling generated an enhanced rate of yield advance over cycles of selection. This occurred because the knowledge associated with component trait physiology and extrapolation to the target population of environments by modelling removed confounding effects associated with environment and gene context dependencies for the markers used. Developing and implementing this gene-to-phenotype capability in crop improvement requires enhanced attention to phenotyping, ecophysiological modelling, and validation studies to test the stability of candidate genetic regions.

Adaptations of strangler figs to life in the rainforest canopy

Figs are rainforest keystone species. Non-strangler figs establish on the forest floor; strangler figs establish epiphytically, followed by a dramatic transition from epiphyte to free-standing tree that kills its hosts. Free-standing figs display vigorous growth and resource demand suggesting that epiphytic strangler figs require special adaptations to deal with resource limitations imposed by the epiphytic environment. We studied epiphytic and free-standing strangler figs, and non-strangler figs in tropical rainforest and in cultivation, as well as strangler figs in controlled conditions. We investigated whether the transition from epiphyte to free-standing tree is characterised by morphological and physiological plasticity. Epiphyte substrate had higher levels of plant-available ammonium and phosphate, and similar levels of nitrate compared with rainforest soil, suggesting that N and P are initially not limiting resources. A relationship was found between taxonomic groups and plant N physiology; strangler figs, all members of subgenus Urostigma, had mostly low foliar nitrate assimilation rates whereas non-strangler figs, in subgenera Pharmacocycea, Sycidium, Sycomorus or Synoecia, had moderate to high rates. Nitrate is an energetically expensive N source, and low nitrate use may be an adaptation of strangler figs for conserving energy during epiphytic growth. Interestingly, significant amounts of nitrate were stored in fleshy taproot tubers of epiphytic stranglers. Supporting the concept of plasticity, leaves of epiphytic Ficus benjamina L. had lower N and C content per unit leaf area, lower stomatal density and 80% greater specific leaf area than leaves of conspecific free-standing trees. Similarly, glasshouse-grown stranglers strongly increased biomass allocation to roots under water limitation. Epiphytic and free-standing F. benjamina had similar average foliar delta C-13, but epiphytes had more extreme values; this indicates that both groups of plants use the C-3 pathway of CO2 fixation but that water availability is highly variable for epiphytes. We hypothesise that epiphytic figs use fleshy stem tubers to avoid water stress, and that nitrate acts as an osmotic compound in tubers. We conclude that strangler figs are a unique experimental system for studying the transition from rainforest epiphyte to tree, and the genetic and environmental triggers involved.

Adaptive responses of wild mungbean (Vigna radiata ssp sublobata) to photo-thermal environment. II. Growth, biomass, and seed yield

The leaf growth, dry matter production, and seed yield of 11 wild mungbean ( Vigna radiata ssp. sublobata) accessions of diverse geographic origin were observed under natural and artificial photoperiod temperature conditions, to determine the extent to which genotypic differences could be attributed to adaptive responses to photo-thermal environment. Environments included serial sowings in the field in SE Queensland, complemented by artificial photoperiod extension and controlled-environment growth rooms. Photo-thermal environment influenced leaf growth, total dry matter production ( TDM), and seed yield directly, through effects of ( mainly cool) temperature on growth, and indirectly, through effects on phenology. In terms of direct effects, leaf production, leaf expansion, and leaf area were all sensitive to temperature, with implied base temperatures higher than usually observed in cultivated mungbean ( V. radiata ssp. radiata). Genotypic sensitivity to temperature varied systematically with accession provenance and appeared to be of adaptive significance. In terms of the indirect effects of photo-thermal environment, genotypic and environmental effects on TDM were positively related to changes in total growth duration, and harvest index was negatively related to the period from sowing to flowering, similar to cultivated mungbean. However, seed yield was positively related to the duration of reproductive growth, reflecting the indeterminate growth habit of the wild accessions. As a consequence, the wild accessions are more responsive to favourable environments than typically observed in cultivated mungbean, which is determinate in habit. It is suggested that the introduction of the indeterminate trait into mungbean from the wild subspecies would increase the responsiveness of mungbean to favourable environments, analogous to that of black gram ( V. mungo). Although the wild subspecies appeared more sensitive to cool temperature than cultivated mungbean, it may provide a source of tolerance to the warmer temperatures experienced during the wet season in the tropics.

Linking physiological processes with mangrove forest structure: phosphorus deficiency limits canopy development, hydraulic conductivity and photosynthetic carbon gain in dwarf Rhizophora mangle

Spatial gradients in mangrove tree height in barrier islands of Belize are associated with nutrient deficiency and sustained flooding in the absence of a salinity gradient. While nutrient deficiency is likely to affect many parameters, here we show that addition of phosphorus (P) to dwarf mangroves stimulated increases in diameters of xylem vessels, area of conductive xylem tissue and leaf area index (LAI) of the canopy. These changes in structure were consistent with related changes in function, as addition of P also increased hydraulic conductivity (K-s), stomatal conductance and photosynthetic assimilation rates to the same levels measured in taller trees fringing the seaward margin of the mangrove. Increased xylem vessel size and corresponding enhancements in stern hydraulic conductivity in P fertilized dwarf trees came at the cost of enhanced midday loss of hydraulic conductivity and was associated with decreased assimilation rates in the afternoon. Analysis of trait plasticity identifies hydraulic properties of trees as more plastic than those of leaf structural and physiological characteristics, implying that hydraulic properties are key in controlling growth in mangroves. Alleviation of P deficiency, which released trees from hydraulic limitations, reduced the structural and functional distinctions between dwarf and taller fringing tree forms of Rhizophora mangle.

Variation in hydraulic conductivity of mangroves: influence of species, salinity, and nitrogen and phosphorus availability

We investigated how species identity and variation in salinity and nutrient availability influence the hydraulic conductivity of mangroves. Using a fertilization study of two species in Florida, we found that stem hydraulic conductivity expressed on a leaf area basis (K-leaf) was significantly different among species of differing salinity tolerance, but was not significantly altered by enrichment with limiting nutrients. Reviewing data from two additional sites (Panama and Belize), we found an overall pattern of declining leaf-specific hydraulic conductivity (K-leaf) with increasing salinity. Over three sites, a general pattern emerges, indicating that native stem hydraulic conductivity (K-h) and K-leaf are less sensitive to nitrogen (N) fertilization when N limits growth, but more sensitive to phosphorus (P) fertilization when P limits growth. Processes leading to growth enhancement with N fertilization are probably associated with changes in allocation to leaf area and photosynthetic processes, whereas water uptake and transport processes could be more limiting when P limits growth. These findings suggest that whereas salinity and species identity place broad bounds on hydraulic conductivity, the effects of nutrient availability modulate hydraulic conductivity and growth in complex ways.

Mapping structural parameters and species composition of riparian vegetation using IKONOS and Landsat ETM+ data in Australian tropical savannahs

Government agencies responsible for riparian environments are assessing the utility of remote sensing for mapping and monitoring vegetation structural parameters. The objective of this work was to evaluate Ikonos and Landsat-7 ETM+ imagery for mapping structural parameters and species composition of riparian vegetation in Australian tropical savannahs for a section of Keelbottom Creek, Queensland, Australia. Vegetation indices and image texture from Ikonos data were used for estimating leaf area index (R-2 = 0.13) and canopy percentage foliage cover (R-2 = 0.86). Pan-sharpened Ikonos data were used to map riparian species composition (overall accuracy = 55 percent) and riparian zone width (accuracy within +/- 3 m). Tree crowns could not be automatically delineated due to the lack of contrast between canopies and adjacent grass cover. The ETM+ imagery was suited for mapping the extent of riparian zones. Results presented demonstrate the capabilities of high and moderate spatial resolution imagery for mapping properties of riparian zones.

The onset and effectiveness of Adult Plant Resistance (APR) in Tallon barley

Field observations of net blotch epidemics indicated that Tallon barley was quite resistant to infection during later stages of growth despite being susceptible as a seedling. A glasshouse experiment was conducted to determine the effectiveness of this resistance and when it became operative. Three cultivars – Gilbert (very susceptible), Patty (resistant) and Tallon – were inoculated at various stages of growth with conidia of Pyrenophora teres f. teres and the infection response and leaf area diseased, recorded 13 days later. The response of Tallon clearly changed from susceptible to moderately susceptible at growth stage 33. Plants sown two weeks earlier were susceptible and plants sown two weeks later were moderately resistant. The response of the other two cultivars at similar growth stages paralleled their seedling responses. The resistance of Tallon appeared to increase with maturity so that, at its most resistant growth stage, the leaf area diseased was just 10% that of the susceptible, Gilbert. While this resistance appears pathotype specific, this experiment demonstrated very effective APR to net blotch. As most losses to this disease occur during the later stages of plant development, APR offers a valuable source of resistance.