Using secondary knowledge to support decision tree classification of retrospective clinical data

Retrospective clinical data presents many challenges for data mining and machine learning. The transcription of patient records from paper charts and subsequent manipulation of data often results in high volumes of noise as well as a loss of other important information. In addition, such datasets often fail to represent expert medical knowledge and reasoning in any explicit manner. In this research we describe applying data mining methods to retrospective clinical data to build a prediction model for asthma exacerbation severity for pediatric patients in the emergency department. Difficulties in building such a model forced us to investigate alternative strategies for analyzing and processing retrospective data. This paper describes this process together with an approach to mining retrospective clinical data by incorporating formalized external expert knowledge (secondary knowledge sources) into the classification task. This knowledge is used to partition the data into a number of coherent sets, where each set is explicitly described in terms of the secondary knowledge source. Instances from each set are then classified in a manner appropriate for the characteristics of the particular set. We present our methodology and outline a set of experiential results that demonstrate some advantages and some limitations of our approach. © 2008 Springer-Verlag Berlin Heidelberg.

Bottom-up risk regulation? How nanotechnology risk knowledge gaps challenge federal and state environmental agencies

Nanotechnologies have been called the "Next Industrial Revolution." At the same time, scientists are raising concerns about the potential health and environmental risks related to the nano-sized materials used in nanotechnologies. Analyses suggest that current U.S. federal regulatory structures are not likely to adequately address these risks in a proactive manner. Given these trends, the premise of this paper is that state and local-level agencies will likely deal with many "end-of-pipe" issues as nanomaterials enter environmental media without prior toxicity testing, federal standards, or emissions controls. In this paper we (1) briefly describe potential environmental risks and benefits related to emerging nanotechnologies; (2) outline the capacities of the Toxic Substances Control Act, the Clean Air Act, the Clean Water Act, and the Resources Conservation and Recovery Act to address potential nanotechnology risks, and how risk data gaps challenge these regulations; (3) outline some of the key data gaps that challenge state-level regulatory capacities to address nanotechnologies' potential risks, using Wisconsin as a case study; and (4) discuss advantages and disadvantages of state versus federal approaches to nanotechnology risk regulation. In summary, we suggest some ways government agencies can be better prepared to address nanotechnology risk knowledge gaps and risk management.

Effective knowledge transfer: a terminological perspective - Dismantling the jargon barrier to knowledge about computer security

The research is concerned with the terminological problems that computer users experience when they try to formulate their knowledge needs and attempt to access information contained in computer manuals or online help systems while building up their knowledge. This is the recognised but unresolved problem of communication between the specialist and the layman. The initial hypothesis was that computer users, through their knowledge of language, have some prior knowledge of the subdomain of computing they are trying to come to terms with, and that language can be a facilitating mechanism, or an obstacle, in the development of that knowledge. Related to this is the supposition that users have a conceptual apparatus based on both theoretical knowledge and experience of the world, and of several domains of special reference related to the environment in which they operate. The theoretical argument was developed by exploring the relationship between knowledge and language, and considering the efficacy of terms as agents of special subject knowledge representation. Having charted in a systematic way the territory of knowledge sources and types, we were able to establish that there are many aspects of knowledge which cannot be represented by terms. This submission is important, as it leads to the realisation that significant elements of knowledge are being disregarded in retrieval systems because they are normally expressed by language elements which do not enjoy the status of terms. Furthermore, we introduced the notion of `linguistic ease of retrieval' as a challenge to more conventional thinking which focuses on retrieval results.

Social capital and tacit knowledge sharing in organisational projects in Malaysian ICT companies

An increasing number of organisational researchers have turned to social capital theory in an attempt to better understand the impetus for knowledge sharing at the individual and organisational level. This thesis extends that research by investigating the impact of social capital on knowledge sharing at the group-level in the organisational project context. The objective of the thesis is to investigate the importance of social capital in fostering tacit knowledge sharing among the team members of a project. The analytical focus is on the Nahapiet and Ghoshal framework of social capital but also includes elements of other scholars' work. In brief, social capital is defined as an asset that is embedded in the network of relationships possessed by an individual or social unit. It is argued that the main dimensions of social capital that are of relevance to knowledge sharing are structural, cognitive, and relational because these, among other things, foster the exchange and combination of knowledge and resources among the team members. Empirically, the study is based on the grounded theory method. Data were collected from five projects in large, medium, and small ICT companies in Malaysia. Underpinned by the constant comparative method, data were derived from 55 interviews, and observations. The data were analysed using open, axial, and selective coding. The analysis also involved counting frequency occurrence from the coding generated by grounded theory to find the important items and categories under social capital dimensions and knowledge sharing, and for further explaining sub-groups within the data. The analysis shows that the most important dimension for tacit knowledge sharing is structural capital. Most importantly, the findings also suggest that structural capital is a prerequisite of cognitive capital and relational capital at the group-level in an organisational project. It also found that in a project context, relational capital is hard to realise because it requires time and frequent interactions among the team members. The findings from quantitative analysis show that frequent meetings and interactions, relationship, positions, shared visions, shared objectives, and collaboration are among the factors that foster the sharing of tacit knowledge among the team members. In conclusion, the present study adds to the existing literature on social capital in two main ways. Firstly, it distinguishes the dimensions of social capital and identifies that structural capital is the most important dimension in social capital and it is a prerequisite of cognitive and relational capital in a project context. Secondly, it identifies the causal sequence in the dimension of social capital suggesting avenues for further theoretical and empirical work in this emerging area of inquiry.

The application of knowledge based expert systems to mechanical engineering design

Investigation of the different approaches used by Expert Systems researchers to solve problems in the domain of Mechanical Design and Expert Systems was carried out. The techniques used for conventional formal logic programming were compared with those used when applying Expert Systems concepts. A literature survey of design processes was also conducted with a view to adopting a suitable model of the design process. A model, comprising a variation on two established ones, was developed and applied to a problem within what are described as class 3 design tasks. The research explored the application of these concepts to Mechanical Engineering Design problems and their implementation on a microcomputer using an Expert System building tool. It was necessary to explore the use of Expert Systems in this manner so as to bridge the gap between their use as a control structure and for detailed analytical design. The former application is well researched into and this thesis discusses the latter. Some Expert System building tools available to the author at the beginning of his work were evaluated specifically for their suitability for Mechanical Engineering design problems. Microsynics was found to be the most suitable on which to implement a design problem because of its simple but powerful Semantic Net Knowledge Representation structure and the ability to use other types of representation schemes. Two major implementations were carried out. The first involved a design program for a Helical compression spring and the second a gearpair system design. Two concepts were proposed in the thesis for the modelling and implementation of design systems involving many equations. The method proposed enables equation manipulation and analysis using a combination of frames, semantic nets and production rules. The use of semantic nets for purposes other than for psychology and natural language interpretation, is quite new and represents one of the major contributions to knowledge by the author. The development of a purpose built shell program for this type of design problems was recommended as an extension of the research. Microsynics may usefully be used as a platform for this development.

METEX: An expert system for metamorphic petrography

Classification of metamorphic rocks is normally carried out using a poorly defined, subjective classification scheme making this an area in which many undergraduate geologists experience difficulties. An expert system to assist in such classification is presented which is capable of classifying rocks and also giving further details about a particular rock type. A mixed knowledge representation is used with frame, semantic and production rule systems available. Classification in the domain requires that different facets of a rock be classified. To implement this, rocks are represented by 'context' frames with slots representing each facet. Slots are satisfied by calling a pre-defined ruleset to carry out the necessary inference. The inference is handled by an interpreter which uses a dependency graph representation for the propagation of evidence. Uncertainty is handled by the system using a combination of the MYCIN certainty factor system and the Dempster-Shafer range mechanism. This allows for positive and negative reasoning, with rules capable of representing necessity and sufficiency of evidence, whilst also allowing the implementation of an alpha-beta pruning algorithm to guide question selection during inference. The system also utilizes a semantic net type structure to allow the expert to encode simple relationships between terms enabling rules to be written with a sensible level of abstraction. Using frames to represent rock types where subclassification is possible allows the knowledge base to be built in a modular fashion with subclassification frames only defined once the higher level of classification is functioning. Rulesets can similarly be added in modular fashion with the individual rules being essentially declarative allowing for simple updating and maintenance. The knowledge base so far developed for metamorphic classification serves to demonstrate the performance of the interpreter design whilst also moving some way towards providing a useful assistant to the non-expert metamorphic petrologist. The system demonstrates the possibilities for a fully developed knowledge base to handle the classification of igneous, sedimentary and metamorphic rocks. The current knowledge base and interpreter have been evaluated by potential users and experts. The results of the evaluation show that the system performs to an acceptable level and should be of use as a tool for both undergraduates and researchers from outside the metamorphic petrography field. .

Knowledge management in knowledge intensive service networks:a strategic management approach

Purpose – The main purpose of this paper is to analyze knowledge management in service networks. It analyzes the knowledge management process and identifies related challenges. The authors take a strategic management approach instead of a more technology-oriented approach, since it is believed that managerial problems still remain after technological problems are solved. Design/methodology/approach – The paper explores the literature on the topic of knowledge management as well as the resource (or knowledge) based view of the firm. It offers conceptual insights and provides possible solutions for knowledge management problems. Findings – The paper discusses several possible solutions for managing knowledge processes in knowledge-intensive service networks. Solutions for knowledge identification/generation, knowledge application, knowledge combination/transfer and supporting the evolution of tacit network knowledge include personal and technological aspects, as well as organizational and cultural elements. Practical implications – In a complex environment, knowledge management and network management become crucial for business success. It is the task of network management to establish routines, and to build and regularly refresh meta-knowledge about the competencies and abilities that exist within the network. It is suggested that each network partner should be rated according to the contribution to the network knowledge base. Based on this rating, a particular network partner is a member of a certain knowledge club, meaning that the partner has access to a particular level of network knowledge. Such an established routine provides strong incentives to add knowledge to the network's knowledge base Originality/value – This paper is a first attempt to outline the problems of knowledge management in knowledge-intensive service networks and, by so doing, to introduce strategic management reasoning to the discussion.

Satisfaction with knowledge and competencies:a multi-country study of employers and business graduates

This study critically discusses findings from a research project involving four European countries. The project had two main aims. The first was to develop a systematic procedure for assessing the balance between knowledge and competencies acquired in higher, further and vocational education and the specific needs of the labor market. The second aim was to develop and test a set of meta-level quality indicators aimed at evaluating the linkages between education and employment. The project was designed to address the lack of employer input concerning the requirements of business graduates for successful workplace performance and the need for more specific industry-driven feedback to guide administrative heads at universities and personnel at quality assurance agencies in curriculum development and revision. Approach: The project was distinctive in that it combined different partners from higher education, vocational training, industry and quality assurance. Project partners designed and implemented an innovative approach, based on literature review, qualitative interviews and surveys in the four countries, in order to identify and confirm key knowledge and competency requirements. This study presents this step-by-step approach, as well as survey findings from a sample of 900 business graduates and employers. In addition, it introduces two Partial Least Squares (PLS) path models for predicting satisfaction with work performance and satisfaction with business education. Results: Survey findings revealed that employers were not very confident regarding business graduates’ abilities in key knowledge areas and in key generic competencies. In subsequent analysis, these graduate abilities were tested and identified as important predictors of employers’ satisfaction with graduates’ work performance. Conclusion: The industry-driven approach introduced in this study can serve as a guide to assist different types of educational institutions to better align study programs with changing labor market requirements. Recommendations for curriculum improvement are discussed.

Knowledge capital, endogenous growth and regional disparities in productivity:multi-level evidences from China

This paper examines the role of knowledge capital in persistent regional productivity disparities in developing countries. The hypotheses are tested using regional and firm level longitudinal data from China. It is found that inequalities in knowledge creation and transfer, both inter-generational and international, played a significant role in increasing regional disparities in productivity. These inequalities are exacerbated by the accumulative nature of knowledge capital. All this leads to self-perpetuating cycles of success and failure, particularly compounded with asymmetric financial and human capital between different regions.

The role of SHRM in turning tacit knowledge into explicit knowledge:a cross-national study of the UK and Malta

We propose that strategic human resource management (SHRM) practices nurture a context of knowledge sharing where tacit knowledge can be turned into explicit knowledge and that this type of knowledge sharing promotes innovative behaviours. We draw on the fields of knowledge management and international human resource management to show why organisations need to turn tacit knowledge into explicit knowledge to gain most from their workforce skills and creativity. Findings from a couple of cross-national case studies show how SHRM promotes employees to interact and share knowledge so that there is a conversion of tacit knowledge to explicit knowledge that informs innovative behaviour. In Case Study 1, the focus is on a UK local authority that implemented a bundle of SHRM practices through a people management programme, which resulted in a flattened management structure. In Case Study 2, the focus is on a geriatric hospital in Malta that introduced a management presence to an interdisciplinary team working to improve patient care. The analysis also highlights the methodological contribution of qualitative research for enabling inductive enquiry that yields emergent themes - an approach not typically seen in SHRM innovation studies. © 2013 Taylor & Francis.

Separating the influences of prereading skills on early word and nonword reading

The essential first step for a beginning reader is to learn to match printed forms to phonological representations. For a new word, this is an effortful process where each grapheme must be translated individually (serial decoding). The role of phonological awareness in developing a decoding strategy is well known. We examined whether beginner readers recruit different skills depending on the nature of the words being read (familiar words vs. nonwords). Print knowledge, phoneme and rhyme awareness, rapid automatized naming (RAN), phonological short term memory (STM), nonverbal reasoning, vocabulary, auditory skills and visual attention were measured in 392 pre-readers aged 4 to 5 years. Word and nonword reading were measured 9 months later. We used structural equation modeling to examine the skills-reading relationship and modeled correlations between our two reading outcomes and among all pre-reading skills. We found that a broad range of skills were associated with reading outcomes: early print knowledge, phonological STM, phoneme awareness and RAN. Whereas all these skills were directly predictive of nonword reading, early print knowledge was the only direct predictor of word reading. Our findings suggest that beginner readers draw most heavily on their existing print knowledge to read familiar words.

Before and after modelling:risk knowledge management is required

Risk and knowledge are two concepts and components of business management which have so far been studied almost independently. This is especially true where risk management is conceived mainly in financial terms, as, for example, in the banking sector. The banking sector has sophisticated methodologies for managing risk, such as mathematical risk modeling. However. the methodologies for analyzing risk do not explicitly include knowledge management for risk knowledge creation and risk knowledge transfer. Banks are affected by internal and external changes with the consequent accommodation to new business models new regulations and the competition of big players around the world. Thus, banks have different levels of risk appetite and policies in risk management. This paper takes into consideration that business models are changing and that management is looking across the organization to identify the influence of strategic planning, information systems theory, risk management and knowledge management. These disciplines can handle the risks affecting banking that arise from different areas, but only if they work together. This creates a need to view them in an integrated way. This article sees enterprise risk management as a specific application of knowledge in order to control deviation from strategic objectives, shareholders' values and stakeholders' relationships. Before and after a modeling process it necessary to find insights into how the application of knowledge management processes can improve the understanding of risk and the implementation of enterprise risk management. The article presents a propose methodology to contribute to providing a guide for developing risk modeling knowledge and a reduction of knowledge silos, in order to improve the quality and quantity of solutions related to risk inquiries across the organization.

A preliminary investigation of 4 to 11-year-old children's knowledge and understanding of stress

Objective. To examine children's knowledge, understanding and experience of stress from 4 to 11 years of age across four age groups (4–5, 6–7, 8–9, and 10–11 years old). Methods. A semi-structured interview format was used to elicit information from 50 children about their understanding and experience of stress. Results. Most children were able to define stress, with older children providing more complex responses. Many children had indirect and/or personal experience of stress. Younger children were more likely than older children to report that there was nothing people could do to stop stress; children reported using both adaptive and maladaptive coping strategies to deal with stress. Conclusion. Some young children have a basic understanding of stress and many have experience of stress; both understanding and experience develop with age. Practice Implications. The research has potential implications for provider-patient communication, particularly within preventative health education and clinically within the field of childhood post-traumatic stress disorder (PTSD).

Mobile case-based decision support for intelligent patient knowledge management

Hospitals everywhere are integrating health data using electronic health record (EHR) systems, and disparate and multimedia patient data can be input by different caregivers at different locations as encapsulated patient profiles. Healthcare institutions are also using the flexibility and speed of wireless computing to improve quality and reduce costs. We are developing a mobile application that allows doctors to efficiently record and access complete and accurate real-time patient information. The system integrates medical imagery with textual patient profiles as well as expert interactions by healthcare personnel using knowledge management and case-based reasoning techniques. The application can assist other caregivers in searching large repositories of previous patient cases. Patients' symptoms can be input to a portable device and the application can quickly retrieve similar profiles which can be used to support effective diagnoses and prognoses by comparing symptoms, treatments, diagnosis, test results and other patient information. © 2007 Sage Publications.

Using XML and XSLT for flexible elicitation of mental-health risk knowledge

Current tools for assessing risks associated with mental-health problems require assessors to make high-level judgements based on clinical experience. This paper describes how new technologies can enhance qualitative research methods to identify lower-level cues underlying these judgements, which can be collected by people without a specialist mental-health background. Content analysis of interviews with 46 multidisciplinary mental-health experts exposed the cues and their interrelationships, which were represented by a mind map using software that stores maps as XML. All 46 mind maps were integrated into a single XML knowledge structure and analysed by a Lisp program to generate quantitative information about the numbers of experts associated with each part of it. The knowledge was refined by the experts, using software developed in Flash to record their collective views within the XML itself. These views specified how the XML should be transformed by XSLT, a technology for rendering XML, which resulted in a validated hierarchical knowledge structure associating patient cues with risks. Changing knowledge elicitation requirements were accommodated by flexible transformations of XML data using XSLT, which also facilitated generation of multiple data-gathering tools suiting different assessment circumstances and levels of mental-health knowledge. © 2007 Informa UK Ltd All rights reserved.