Improving the environmental performance of bedding products by using life cycle assessment at the design stage

Improvement of the environmental performance of processes and products is a common objective in industry, and has been receiving increased attention in recent years. The main objective of this work is to evaluate the potential environmental impact of two bedding products, a polyurethane foam mattress (PFM) and a pocket spring mattress (PSM). These two types are the most common mattresses used in Europe. A Life Cycle Assessment (LCA) shows that the PFM has a higher environmental impact than the PSM. For both products the main cause of environmental impact is the manufacturing process, respectively the polyurethane foam block moulding process for the PFM, and the pocket spring nucleus process for the PSM. A scenario analysis shows the possibility of reducing the environmental impact of the products’ life cycle using an alternative End-of-Life scenario, resorting to incineration rather than landfill. Two strategies were also studied in order to reduce the environmental impact of the PFM: (1) reutilization of foam that was sent to the waste system management, and (2) a 20% weight reduction of the polyurethane foam. The second strategy has proven to be the most effective.

Spatial variability of particle size fractions of an Oxisol cultivated with conilon coffee

Information on the spatial distribution of particle size fractions is essential for use planning and management of soils. The aim of this work to was to study the spatial variability of particle size fractions of a Typic Hapludox cultivated with conilon coffee. The soil samples were collected at depths of 0-0.20 and 0.20-0.40 m in the coffee canopy projection, totaling 109 georeferentiated points. At the depth of 0.2-0.4 m the clay fraction showed average value significantly higher, while the sand fraction showed was higher in the depth of 0-0.20 m. The silt showed no significant difference between the two depths. The particle size fractions showed medium and high spatial variability. The levels of total sand and clay have positive and negative correlation, respectively, with the altitude of the sampling points, indicating the influence of landscape configuration.

Inter-relações da produtividade de cana soca com a resistência à penetração, umidade e matéria orgânica do solo

A cultura da cana-de-açúcar desempenha, sobretudo no aspecto relacionado às fontes energéticas alternativas, importantíssimo papel. No ano de 2009, no município de Suzanápolis (SP), cujas coordenadas são 20º 28' 10'' S e 50º 49' 20'' W, no cerrado brasileiro foi analisada a produtividade da cana soca (2º ciclo) em razão da resistência à penetração, umidade gravimétrica e matéria orgânica de um Argissolo Vermelho eutrófico. O objetivo foi selecionar, entre os atributos pesquisados, aquele com a melhor correlação, a linear e a espacial, para explicar a variabilidade da produtividade da cana-de-açúcar. Foi instalada a malha geoestatística para a coleta de dados do solo e da planta, com 120 pontos amostrais, numa área de 14,53 ha. A matéria orgânica correlaciona-se linear e negativamente com a resistência à penetração, indicando que manejos do solo que visem seu aumento no perfil melhoram suas condições físicas e, por conseguinte, o desenvolvimento e a produtividade da cana-de-açúcar. A umidade gravimétrica (UG) e o teor de matéria orgânica do solo (MO) correlacionam-se direta, linear (UG2 e MO1) e espacialmente (UG1 e MO1) com a produtividade da cana-de-açúcar, demonstrando serem os melhores atributos, dentre os pesquisados, para estimar e aumentar a produtividade agrícola da cana-de-açúcar.

A inter-relação trabalho-saúde mental: um estudo de caso

A autora, após sintetizar algumas das vertentes de estudo e conceitos atuais na temática da inter-relação trabalho-saúde mental, apresenta um estudo de caso individual. Trata-se do caso de um mecânico industrial do setor siderúrgico que desenvolveu um quadro psicopatol6gico. A evolução de manifestações de fadiga crônica e desencadeamento de uma crise mental aguda são examinadas em suas correlações ao hist6rico de vida e trabalho e a dinâmicas referidas às condições e à organização do trabalho no emprego atual.

The undergraduate level (1st study cycle) as a fundamental platform/standard for the development of Urban and Regional Planning in higher education programs

LUDA is a research project of Key Action 4 "City of Tomorrow & Cultural Heritage" of the programme "Energy, Environment and Sustainable Development" within the Fifth Framework Programme of the European Commission

Reelection incentives and political budget cycle: evidence from Brazil

This article tests the presence of political budget cycle (PBC) in municipal elections in Brazil and checks whether mayors who adopt such policy have greater probability of reelection. Based on fiscal and electoral data of 5,406 Brazilian municipalities and applying the difference-in-differences econometric method as well as logistic regressions, the results provide some evidence of PBC in Brazil, although its magnitude and consistency varies depending on the years used as electoral and non-electoral years. On average, reelectable mayors spend close to 3% more in election years than nonreelectables. Moreover, reelectables who do run for reelection present a variation in spending which is close to 5% superior to that of non-reelectables and non-runners. Additionally, the results suggest that mayors who increase public spending during electoral periods have greater chances of being reelected, as long as such spending is done within deficit limits acceptable by voters.

Ultrapassando as dificuldades da dislexia através da arte

Resumo: A intervenção em crianças disléxicas nem sempre é fácil uma vez que, à partida, serão crianças desmotivadas por insucessos repetidos, complexos de inferioridade, timidez, baixa autoconfiança e auto-estima, com pouca capacidade de atenção e concentração. A família, a escola e a sociedade em geral têm um papel decisivo, não deverão exigir nem impor metas complicadas, adaptando sempre uma postura de compreensão da criança. A criança disléxica aprende num ritmo diferente, como tal, precisa que a escola adeqúe as suas práticas educativas tendo em conta as suas características e especificidades. Pretende-se com este trabalho aprofundar conhecimentos sobre a temática da dislexia e sua aplicação, dentro da sala de aula, na disciplina Educação Visual e Tecnológica, numa turma do 2º Ciclo do Ensino Básico que inclui uma aluna considerada disléxica. Começámos por caracterizar a turma, a aluna e os contextos envolventes em que as mesmas se inserem, seguidamente fez-se uma intervenção estruturada, a longo e curto prazo, numa dinâmica de planificação, acção e reflexão, numa perspectiva de educação inclusiva, com práticas educativas cooperativas e diferenciadas. Ao longo das sessões de trabalho, a turma teve a oportunidade de se manifestar nas assembleias de turma, na negociação das actividades, de trabalhar em pares, em grande e pequeno grupo, criando desta forma um clima de inter-ajuda e de cooperação na sala de aula, funcionando com as duas professoras da disciplina, partilhando momentos de aprendizagem e socialização de saberes. A aluna considerada disléxica passou a interagir na turma com os colegas, de forma positiva, e estes com ela. As suas dificuldades foram superadas com a ajuda dos colegas, partilhando os seus saberes, dúvidas e experiências. Foi uma experiência positiva para o grupo, para a aluna e para as professoras da turma. Abstract: The intervention in dyslexic children is not always easy from the start, a priori, children will be discouraged by repeated failures, inferiority complexes, shyness, low selfconfidence and self- esteem, with little attention span and concentration. The family, school and society in general have a decisive role, should not require or impose complicated goals, always adapting an attitude of understanding of the child. The dyslexic children learn at a different pace, as such, requires the school to adjust its educational practices in view of their characteristics and specificities. The aim of this work to deepen knowledge on the subject of dyslexia and its application in the classroom, Visual and Technological Education as the subject, in a class of the 2nd Cycle of Basic Education that includes a student considered dyslexic. We have began by characterizing the class, the student and the surrounding contexts in which they are involved, then became a structured intervention in the long and short term, in order of creating a dynamic planning, action and reflection, with a inclusive education perspective, with cooperative practical education and differentiated. During the work seasons, the class had the opportunity to express themselves in class meetings, the negotiation activities, working in pairs, in large and small groups, thus creating a climate of mutual help and cooperation in the classroom, working with two teachers of the subject, sharing moments of learning and socialization of knowledge. The student consider as dyslexic has started to interact in the class with the colleagues in a positive way, and they with her. Their difficulties were overcome with the help of colleagues, sharing their knowledge, doubts and experiences. It was a positive experience for the group, to the student and the teachers of the class.

Os eventos vitais: aspectos de seus registros e inter-relação da legislação vigente com as estatísticas de saúde

Foram estudados os registros civis desde as suas origens, salientando aspectos legislativos do Brasil, chamando a atenção para algumas implicações que a legislação a eles referente trazem às estatísticas vitais e suas repercussões em planejamento de saúde e epidemiologia. Relativamente ao nascimento foram abordados alguns tópicos, com ênfase no problema do registro por local de ocorrência, fato que influe enormemente em programações de saúde materno-infantil. Foram salientados também alguns aspectos do sub-registro de nascimento, citando dados para São Paulo. Quanto aos óbitos foram analisados o registro por local de ocorrência, o prazo para registro, o problema das causas de morte e o relativo ao sub-registro. Com referência aos nascidos mortos, foi apresentada a conceituação de nascido vivo e nascido morto da Organização Mundial da Saúde e indicado o fato de sua não aplicação prática repercutir nos campos do Direito e da Estatística Vital. Foram feitas algumas recomendações no sentido de um maior entrosamento entre os vários profissionais - legisladores, médicos, oficiais de cartório, estaticistas de saúde - que, de uma maneira ou de outra, têm relação com os eventos vitais.

Supervisão inter-pares: um percurso colaborativo de formação

Projecto de intervenção apresentado à Escola Superior de Educação de Lisboa para obtenção de grau de mestre em Ciências da Educação -Especialização em Supervisão em Educação

Environmental life cycle assessment of concrete made with fine recycled concrete aggregates

The majority of worldwide structures use concrete as its main material. This happens because concrete is economically feasible, due to its undemanding production technology and case Of use. However, it is widely recognized that concrete production has a strong environmental impact in the planet. Natural aggregates use is one of the most important problems of concrete production nowadays, since they are obtained from limited, and in some countries scarce, resources. In Portugal, although there are enough stone quarries to cover coarse aggregates needs for several more years, Supplies of fine aggregates are becoming scarcer, especially in the northern part of the country. On the other hand, as concrete structures' life cycle comes to an end, an urgent need emerges to establish technically and economically viable solutions for demolition debris, other than for use as road base and quarry fill. This paper presents a partial life cycle assessment (LCA) of concrete made with fine recycled concrete aggregates performed with EcoConcrete tool. EcoConcrete is a tailor-made, interactive, learning and communications tool promoted by the Joint Project Group (JPG) on the LCA of concrete, to qualify and quantify the overall environment impact of concrete products. It consists of an interactive Excel-spreadsheet in which several environmental inputs (material quantities, distances from origin to production Site, production processes) and outputs (material, energy, emissions to air, water, soil or waste) are collected in a life cycle inventory, and are then processed to determine the environmental impact (assessment) of the analysed concrete, in terms of ozone layer depletion, smog or "greenhouse" effect.

New Steel Alloys for the Design of Heat Recovery Steam Generator Components of Combined Cycle Gas Plants

Demand for power is growing every day, mainly due to emerging economies in countries such as China, Russia, India, and Brazil. During the last 50 years steam pressure and temperature in power plants have been continuously raised to improve thermal efficiency. Recent efforts to improve efficiency leads to the development of a new generation of heat recovery steam generator, where the Benson once-through technology is applied to improve the thermal efficiency. The main purpose of this paper is to analyze the mechanical behavior of a high pressure superheater manifold by applying finite element modeling and a finite element analysis with the objective of analyzing stress propagation, leading to the study of damage mechanism, e.g., uniaxial fatigue, uniaxial creep for life prediction. The objective of this paper is also to analyze the mechanical properties of the new high temperature resistant materials in the market such as 2Cr Bainitic steels (T/P23 and T/P24) and also the 9-12Cr Martensitic steels (T/P91, T/P92, E911, and P/T122). For this study the design rules for construction of power boilers to define the geometry of the HPSH manifold were applied.

Multidimensional aspects related to shiftworkers' health and well-being

The impact of shift and night work on health shows a high inter- and intra-individual variability, both in terms of kind of troubles and temporal occurrence, related to various intervening factors dealing with individual characteristics, lifestyles, work demands, company organisation, family relations and social conditions. The way we define "health" and "well-being" can significantly influence appraisals, outcomes and interventions. As the goal is the optimisation of shiftworkers' health, it is necessary to go beyond the health protection and to act for health promotion. In this perspective, not only people related to medical sciences, but many other actors (ergonomists, psychologists, sociologists, educators, legislators), as well as shiftworkers themselves. Many models have been proposed aimed at describing the intervening variables mediating and/or moderating the effects; they try to define the interactions and the pathways connecting risk factors and outcomes through several human dimensions, which refer to physiology, psychology, pathology, sociology, ergonomics, economics, politics, and ethics. So, different criteria can be used to evaluate shiftworkers' health and well-being, starting from biological rhythms and ending in severe health disorders, passing through psychological strain, job dissatisfaction, family perturbation and social dis-adaptation, both in the short- and long-term. Consequently, it appears rather arbitrary to focus the problem of shiftworkers' health and tolerance only on specific aspects (e.g. individual characteristics), but a systemic approach appears more appropriate, able to match as many variables as possible, and aimed at defining which factors are the most relevant for those specific work and social conditions. This can support a more effective and profitable (for individuals, companies, and society) adoption of preventive and compensative measures, that must refer more to "countervalues" rather than to "counterweights".