Interoperability for IoT Health Systems Using HL7 Standard

Internet of Things or IoT is revolutionizing the world we are living in, similarly the way Internet and the web did few decades ago. It is changing how we interact with the things surrounding us. Electronic health and remote patient monitoring are the ways of utilizing these technological improvements towards the healthcare. There are many applications of IoT in eHealth such as, it will open the gate to provide healthcare to the remote areas of the world, where healthcare through traditional hospital systems cannot be provided. To connect these new eHealth IoT systems with the existing healthcare information systems, we can use the existing interoperability standards commonly used in healthcare information systems. In this thesis we implemented an eHealth IoT system based on Health Level 7 interoperability standard for continuous data transmission. There is not much previous work done in implementing the HL7 for continuous sensor data transmission. Some of the previous work was limited to sensors which are not continuous in nature and some of it is only theatrical architecture. This thesis aims to prove that it is possible to implement an eHealth IoT system by using sensors which require continues data transmission, such as respiratory sensors, and to connect it with the existing eHealth information system semantically by using HL7 interoperability standard. This system will be beneficial in implementing eHealth IoT systems for those patients, who requires continuous healthcare personal monitoring. This includes elderly people and patients, whose health need to be monitored constantly. To implement the architecture, HL7 v2.5 is selected due to its ease of implementation and low size. We selected some open source technologies because of their open licenses and large developer community. We will also review the most efficient technology available in every layer of eHealth IoT system and will propose an efficient system.

Armourstone revetments : will standard design criteria prevent failure? /

Bank stabilization structures are used to prevent the loss of valuable land within the urban environment and the decision for the type of structure used depends on the properties of the stream. In the urban areas of Southern Ontario there is a preference for the use of armourstone blocks as bank stabilization. The armourstone revetment is a free standing stone structure with large blocks of stone layered vertically and offset from one another. During fieldwork at Forty Mile Creek in Grimsby, Ontario armourstone failure was identified by the removal of two stones within one column from the wall. Since the footer stones were still in place, toe scour was eliminated as a cause of failure. Through theoretical, field, and experimental work the process of suction has been identified as a mode of failure for the armourstone wall and the process of suction works similarly to quarrying large blocks of rock off bedrock streambeds. The theory of lateral suction has previously not been taken into consideration for the design of these walls. The physical and hydraulic evidence found in the field and studied during experimental work indicate that the armourstone wall is vulnerable to the process of suction. The forces exerted by the flow and the resistance of the block determine the stability of the armourstone block within the wall. The design of the armourstone wall, high surface velocities, and short pulses of faster flowing water within the profile could contribute to armourstone failure by providing the forces needed for suction to occur, therefore adjustments to the design of the wall should be made in order to limit the effect.

St. Catharines Standard fonds, 1970, 1974, 1988-1991, n.d.

The St. Catharines Standard started publication in 1891 under W.B. Burgoyne. It was subsequently purchased by Southam Newspapers, then Canwest Global Communications. Osprey Media took over the publication until June 1, 2007 when Quebecor acquired the company. The St. Catharines Standard celebrated its centennial in 1991 with mobile displays, a centennial logo and slogan, a Christmas card, an advertising campaign, a video and a centennial theme to regular promotions. As part of the activities, the Standard commissioned Brock University to produce a history of St. Catharines. This book entitled St. Catharines Canada’s Canal City is a popular book rather than an academic text. The authors have woven together stories of the past and present to showcase the character and personality of St. Catharines. The book is full of maps and photographs, many of which had not been seen in print before this time.

Article - St. Catharines Standard post race, 7 July 1952

A photograph and brief comment about the race results for Dorothy Rungeling. She is photographed next to George Belfry of Thompson Products (sponsor), Alice Little (co-pilot) and radio broadcaster Rex Stimers.

The Daily Standard, January 2, 1900

The Daily Standard, St. Catharines, Ontario. This paper contains an advertisement for James D. Tait Company and H.K. Woodruff is listed under the article “The Voice of the People” as an elected member of the Water Commission and an alderman January 2, 1900.

The St. Catharines Standard supplement, November 28, 1974

The St. Catharines Standard supplement featuring a Tribute to the Father of Transportation, the Honorable William Hamilton Merritt, November 28, 1974.

Implementación del sistema de aseguramiento de calidad ISO 9002.

Tesis (Maestría en Ciencias de la Administración con Especialidad en Producción y Calidad) UANL

Certificación de las normas ISO-9000 aplicado a la industria manufacturera del ramo de la electrónica

Tesis (Maestría en Ciencias de la Administración con Especialidad en Producción y Calidad) UANL

Implementación de la norma ISO 9002 en el departamento de compras de una industria siderúrgica

Tesis (Maestría en Ciencias de la Administración con Especialidaden Producción y Calidad) UANL

ISO 9004-2 cómo lograr la certificación en la FIME por Alejandro Aguilar Meraz.

Tesis (Maestría en Ciencias de la Administración con Especialidad en Producción y Calidad) U.A.N.L. - 1997

Implementación del sistema de aseguramiento de calidad ISO 9002 por Jesús González Olivo

Tesis (Maestría en Ciencias de la Administración con Especialidad en Producción y Calidad) - U.A.N.L, 1997

Sistema de implementación ISO 9000

Tesis (Maestría en Ciencias de la Administración con Especialidad en Relaciones Industriales)- UANL, 1998

Implementación de un sistema de aseguramiento de calidad para la empresa DYMO Plásticos, S.A. con el fin de obtener la certificación a la norma ISO-9002 por Felipe de Jesús Díaz Morales

Tesis (Maestría en Ciencias de la Administración con Especialidad en Producción y Calidad) - U.A.N.L, 1998

Auditorías internas de calidad con fundamento en ISO 9000

Tesis (Maestría en Ciencias de la Administración con Especialidad en Producción y Calidad) - U.A.N.L., 1999