Some Law and Economics of Historic Shipwrecks

This paper examines how US and proposed international law relate to the recovery of archaeological data from historic shipwrecks. It argues that US federal admiralty law of salvage gives far less protection to historic submerged sites than do US laws protecting archaeological sites on US federal and Indian lands. The paper offers a simple model in which the net present value of the salvage and archaeological investigation of an historic shipwreck is maximized. It is suggested that salvage law gives insufficient protection to archaeological data, but that UNESCO's Convention on the Protection of the Underwater Cultural Heritage goes too far in the other direction. It is also suggested that a move towards maximizing the net present value of a wreck would be promoted if the US admiralty courts explicitly tied the size of salvage awards to the quality of the archaeology performed.

Murky Waters: The Law and Economics of Salvaging Historic Shipwrecks

The salvage of historic shipwrecks involves a debate between salvors, who wish to maximize profit, and archeologists, who wish to preserve historical value. Traditionally, salvage of shipwrecks has been governed by admiralty law, but the Abandoned Shipwreck Act of 1987 transferred title of historically important wrecks in U.S. waters to the state in whose waters the wreck is found, thereby abrogating admiralty law. This paper examines incentives to locate and salvage historic wrecks under traditional admiralty law and proposes an efficient reward scheme. It then re-considers current U.S. and international law in light of the results.

Similarities and Differences in Barrel Vaults of Traditional and Stately Houses in the Historic Centre of Arequipa, Perú

The traditional architecture of the centre of the city of Arequipa has been analyzed by comparing floor-plans of houses from the eighteenth and nineteenth centuries in order to explain the reasons behind the arrangement of their constructional elements and the evolution of said elements and floor-plans. The historic centre of Arequipa, a city located in the South of Perú, South America (Latitude 16°23' South, Longitude 71 °31' West), is based on a ground plan from 1540 that was set during the city's Spanish foundation. It was declared Patrimony of the Humanity by UNESCO. The manorial architecture is widely known for its decorated fronts and one-of-a-kind designs, but its differences with respect to the popular architecture are not based exclusively on decorative aspects. Peru's colonial period finished around 1825, but the barrel-vault, construction style continued in Arequipa through 1868, when an earthquake destroyed the city. Thereafter, the vaults were replaced by roofs made of rails, with cinders made out of the lava stone. The stately houses belonged to the founding families who settled around the main square on forty nine blocks that formed a square-grid, street layout. Also belonging to this category are the houses of landlords and traders from post-colonial times.

Impact And Explosive Loads On Concrete Buildings Using Shell And Beam Type Elements

The threat of impact or explosive loads is regrettably a scenario to be taken into account in the design of lifeline or critical civilian buildings. These are often made of concrete and not specifically designed for military threats. Numerical simulation of such cases may be undertaken with the aid of state of the art explicit dynamic codes, however several difficult challenges are inherent to such models: the material modeling for the concrete anisotropic failure, consideration of reinforcement bars and important structural details, adequate modeling of pressure waves from explosions in complex geometries, and efficient solution to models of complete buildings which can realistically assess failure modes. In this work we employ LS-Dyna for calculation, with Lagrangian finite elements and explicit time integration. Reinforced concrete may be represented in a fairly accurate fashion with recent models such as CSCM model [1] and segregated rebars constrained within the continuum mesh. However, such models cannot be realistically employed for complete models of large buildings, due to limitations of time and computer resources. The use of structural beam and shell elements for this purpose would be the obvious solution, with much lower computational cost. However, this modeling requires careful calibration in order to reproduce adequately the highly nonlinear response of structural concrete members, including bending with and without compression, cracking or plastic crushing, plastic deformation of reinforcement, erosion of vanished elements etc. The main objective of this work is to provide a strategy for modeling such scenarios based on structural elements, using available material models for structural elements [2] and techniques to include the reinforcement in a realistic way. These models are calibrated against fully three-dimensional models and shown to be accurate enough. At the same time they provide the basis for realistic simulation of impact and explosion on full-scale buildings

New Constructive Solutions to Improve Energy Efficiency in Existing Buildings and their Economic Viability

The improvement of energy efficiency in existing buildings is always a challenge due to their particular, and sometimes protected, constructive solutions. New constructive regulations in Spain leave a big undefined gap when a restoration is considered because they were developed for new buildings. However, rehabilitation is considered as an opportunity for many properties because it allows owners to obtain benefits from the use of the buildings. The current financial and housing crisis has turned society point of view to existing buildings and making them more efficient is one of the Spanish government’s aims. The economic viability of a rehabilitation action should take all factors into account: both construction costs and the future operative costs of the building must be considered. Nevertheless, the application of these regulations in Spain is left to the designer’s opinion and always under a subjective point of view. With the research work described in this paper and with the help of some case-studies, the cost of adapting an existing building to the new constructive regulations will be studied and Energetic Efficiency will be evaluated depending on how the investment is recovered. The interest of the research is based on showing how new constructive solutions can achieve higher levels of efficiency in terms of energy, construction and economy and it will demonstrate that Life Cycle Costing analysis can be a mechanism to find the advantages and disadvantages of using these new constructive solutions. Therefore, this paper has the following objectives: analysing constructive solutions in existing buildings - to establish a process for assessing total life cycle costs (LCC) during the planning stages with consideration of future operating costs - to select the most advantageous operating system – To determine the return on investment in terms of construction costs based on new techniques, the achieved energy savings and investment payback periods.

Ethics and materials: Some Spanish Cases

The problem is general: modern architects and engineers are trying to understand historic structures using the wrong theoretical frame, the classic (elastic) thery of structures developed in the 19th Century for iron and stell, and in the 20th century for reinforced concrete, disguised with "modern" computer packages, mainly FEM, but also others. Masonry is an essentially different material, and the structural equations must be adapted accordingly. It is not a matter of "taste" or "opinion", and the consequences are before us. Since, say 1920s, historic monuments have suffered the aggression of generations of archietcts and engineers, trying to transform masonry in reinfored concrete or steel. The damage to the monuments and the expense has been, and is, enormous. However, as we have an adequate theory (modern limit analysis of masonry structures, Heyman 1966) which encompasses the "old theory" used successfully by the 18th and 19th Century practical engineers (from Perronet to Sejourné), it is a matter of "Ethics" not to use the wrong approach. It is also "contra natura" to modify the material masonry with indiscriminate injections, stitchings, etc. It is insane to consider, suddenly, that buildings which are Centuries or milennia old, are suddenly in danger of collapse. Maintenance is necessary but not the actual destruction of the constructive essence of the monument. A cocktail of "ignorance, fear and greed" is acting under the best of intentions.

Assessing the solar irradiation potential for solar photovoltaic applications in buildings at low latitudes ¿ Making the case for Brazil

In Brazil, a low-latitude country characterized by its high availability and uniformity of solar radiation, the use of PV solar energy integrated in buildings is still incipient. However, at the moment there are several initiatives which give some hints that lead to think that there will be a change shortly. In countries where this technology is already a daily reality, such as Germany, Japan or Spain, the recommendations and basic criteria to avoid losses due to orientation and tilt are widespread. Extrapolating those measures used in high latitudes to all regions, without a previous deeper analysis, is standard practice. They do not always correspond to reality, what frequently leads to false assumptions and may become an obstacle in a country which is taking the first step in this area. In this paper, the solar potential yield for different surfaces in Brazilian cities (located at latitudes between 0° and 30°S) are analyzed with the aim of providing the necessary tools to evaluate the suitability of the buildings’ envelopes for photovoltaic use

E.1027. Maison en bord de mer: Theoretical Restoration

E.1027, Maison en bord de mer is a small villa in Roquebrune Cap-Martin, built by architects Eileen Gray and Jean Badovici between 1926 and 1929. It was hailed as a landmark of modern architecture, and then forgotten. Over the years many transformations have been carried out, and these changes have altered the spatial qualities of the original project. Time and neglect have taken their toll, and until 2008 the villa was abandoned, a shadow of its former self. In order to state an appropriate restoration, a description of the house and its historic evolution has been made, comparing plans of its different transformations. After compiling the most common pathologies and restoration procedures in buildings of the Modern Movement in general, the particular pathologies of E.1027 are presented, concluding with a restoration proposal for E.1027 that considers aesthetical as well as technical aspects. This study involves an attempt to establish guidelines for the theoretical and technical aspects for restoration of architecture of the Modern Movement, using the Maison en bord de mer as an example.

The future obligations of "project manager" as construction integral director (DIPE) in the law of buildings construction in spain (LOE)

In the year 1999 approves the Law of Construction Building (LOE, in Spanish) to regulate a sector such as construction, which contained some shortcomings from the legal point of view. Currently, the LOE has been in force 12 years, changing the spanish world of the construction, due to influenced by internationalization. Within the LOE, there regulating the different actors involved in the construction building, as the Projects design, the Director of Construction, the developer, The builder, Director of execution of the construction (actor only in Spain, similar as construcion engineer and abroad in), control entities and the users, but lacks figure Project manager will assume the delegation of the promoter helping and you organize, direct and management the process. This figure assumes that the market and contracts are not legally regulated in Spain, then should define and establish its regulation in the LOE. (Spain Construction Law) The translation in spanish of the words "Project Manager is owed to Professor Rafael de Heredia in his book Integrated Project Management, as agent acting on behalf of the organization and promoter assuming control of the project, ie Integraded Project Management . Already exist in Spain, AEDIP (Spanish Association Integrated of Project Construction management) which comprises the major companies in “Project Management” in Spain, and MeDIP (Master in Integrated Construction Project) the largest and most advanced studies at the Polytechnic University of Madrid, in "Construction Project Management" they teach which is also in Argentina. The Integrated Project ("Project Management") applied to the construction process is a methodological technique that helps to organize, control and manage the resources of the promoters in the building process. When resources are limited (which is usually most situations) to manage them efficiently becomes very important. Well, we find that in this situation, the resources are not only limited, but it is limited, so a comprehensive control and monitoring of them becomes not only important if not crucial. The alternative of starting from scratch with a team that specializes in developing these follow directly intervening to ensure that scarce resources are used in the best possible way requires the use of a specific methodology (Manual DIP, Matrix Foreign EDR breakdown structure EDP Project, Risk Management and Control, Design Management, et ..), that is the methodology used by "Projects managers" to ensure that the initial objectives of the promoters or investors are met and all actors in process, from design to construction company have the mind aim of the project will do, trying to get their interests do not prevail over the interests of the project. Among the agents listed in the building process, "Project Management" or DIPE (Director Comprehensive building process, a proposed name for possible incorporation into the LOE, ) currently not listed as such in the LOE (Act on Construction Planning ), one of the agents that exist within the building process is not regulated from the legal point of view, no obligations, ie, as is required by law to have a project, a builder, a construction management, etc. DIPE only one who wants to hire you as have been advanced knowledge of their services by the clients they have been hiring these agents, there being no legal obligation as mentioned above, then the market is dictating its ruling on this new figure, as if it were necessary, he was not hired and eventually disappeared from the building process. As the aim of this article is regular the process and implement the name of DIPE in the Spanish Law of buildings construction (LOE)

Process of Expropriation of Buildings for the Construction of the New Dock of the Port of Cartagena (Spain) in the 18th Century

The need of the Bourbon monarchy to build a Naval Base in the Bay of Cartagena (Spain) during the eighteenth century, implied performing various actions on the environment which allowed the construction of the new dock. One of the priority actions was the transformation of the watershed of the streams that flowed into Mandaraches´s sea. For this reason, a dike was designed and constructed in the northern part of the city. The design of this great work, which was designed as a fortification of the city, was subject to considerable uncertainties. Its proximity to the city involved the demolition of several buildings in the San Roque´s neighborhood. The greater or lesser number of affected buildings and the value of the just indemnification for the expropriation of them, become decisive factors to determine if the work was viable for the Royal Estate or not.

Reuse of vacant agro-industrial buildings. The case of the public slaughterhouses in Spain

Nearly 3000 slaughterhouses (74% of them public facilities) were built in Spain during the last decades of the nineteenth century and the first half of the twentieth century. The need to comply with new technical requirements and regulations on the hygiene of the meat passed in the 70s and the gradual replacement of public facilities by larger and more modern private slaughterhouses have subsequently led to the closure and abandonment of many of these buildings. Public slaughterhouses generally consisted of several single-storey and open-plan buildings located around a courtyard. Although originally they were preferably located on the outskirts of the towns, many slaughterhouses are now placed inside the built up areas, due to the urban development. The present work aims to contribute to a better understanding of these agro-industrial buildings and to provide ideas for their conservation and reuse. A review on the historical evolution and the architectural features of the public slaughterhouses in Spain is presented and different examples of old vacant slaughterhouses reused to accommodate libraries, offices, community centres, exhibition halls or sports centres, among others, are shown in the paper.

Seismic vulnerability analysis of wide-beam buildings in Spain

A number of short-to-mid height RC buildings with wide beams have been constructed in moderate-seismicity areas of Spain. The seismic behavior in the direction of the wide beams appears to be deficient because of low lateral strength, low ductility of the wide beams, big strut compressive forces inside the column-beam connections, and unreliable contribution of the spandrel zones of the wide beams. In the orthogonal direction, the behavior is worse since only the joists and the façade beams contribute to the lateral resistance. The objective is to assess the seismic capability of these structures; further research will involve proposing retrofit strategies. The research approach consists of selecting a number of representative buildings and evaluating their vulnerability by code-type, push-over and dynamic analyses. The cooperation of the masonry infill walls is accounted for. The main conclusion is that the seismic behavior of these buildings is inadequate in most of the situations.

Procesos configurativos: de la trama a la noción de campo en los "mat buildings"

La presente tesis aborda el estudio sobre los llamados mat buildings, que surgen entre los años cincuenta y sesenta del pasado siglo. Los mat buildings, también llamados “edificios esteras” o “edificios alfombras”, nacen en gran parte como consecuencia de los desacuerdos e insatisfacciones de los CIAM con el reduccionismo funcionalista y los principios de compartimentación funcional. Estos nuevos modelos remplazan el modelo de ciudad entendido como una colección de edificios individuales por una concepción de un patrón urbano. No es la suma de la longitud, la altura y el ancho sino más bien una densa alfombra bi-dimensional, con una configuración de formas que ofrece al mismo tiempo un orden repetitivo y una infinita diversidad de secuencias con infinitas posibilidades de adaptación donde el hombre vive y se desplaza. Estas características que irán apareciendo en la obras de muchos de los arquitectos que forman parte del grupo Team X son los que Alison Smithson empieza a revelar en su artículo, con la ambición de manifestar una nueva sensibilidad y una nueva forma de entender y ver la arquitectura. Los mat buildings y los cluster serán los códigos utilizados por diferentes miembros del Team X para pensar una arquitectura y un urbanismo alternativo al propuesto por los CIAM. Mediante ellos encuentran el camino para una nueva estética de la conexión con un desplazamiento desde una concepción determinista de la forma arquitectónica (una forma cerrada y en general definida a priori) hacia una actitud más libre, más abierta, fundamentada no tanto en la entereza de la forma global sino en cuanto a la intensidad de sus redes internas y de sus diferentes niveles de asociación. La tesis tiene como propósito final cuestionar si esta tipología de edificios, cuyo principio de base es siempre una matriz geométrica abierta (trama, retícula, malla), con crecimiento ilimitado, puede redefinir la frontera entre ciudad y edificio y, por tanto, entre público y privado, individual y colectivo, estructural e infraestructural, permanente y variable. Por ello, se presenta un estudio histórico y crítico en profundidad sobre los mat buildings, analizando detenidamente y por orden cronológico cinco de sus obras más paradigmáticas: el Orfanato en Ámsterdam de Aldo Van Eyck, la Universidad Libre en Berlín de Candilis, Josic y Woods, el Hospital de Venecia de Le Corbusier y Guillermo Jullián de la Fuente, el edificio administrativo de la Centraal Beheer en Apeldoorn de Herman Hertzberger, y por último el MUSAC en León, realizado por Mansilla y Tuñon. Las cuatro primeras obras pertenecen al periodo Team X y son precursoras de muchos otros proyectos que aparecerán a posteriori. La última obra analizada, el MUSAC, es estudiada conjuntamente con algunas obras del arquitecto japonés Sou Fujimoto y otros casos contemporáneos con la intención de manifestar cómo arquitectos de horizontes muy diferentes vuelven a recurrir a estos modelos de crecimientos ilimitados. Mediante el estudio de varios ejemplos contemporáneos se examinan las repercusiones, transformaciones y evoluciones que estos modelos han tenido. La exploración contrastada permite apreciar adecuadamente la pertinencia de estos modelos y los cambios de modalidades y de procesos que advienen con la aparición en el panorama contemporáneo de la noción de campo y los cambios de paradigma que conlleva. Estos nuevos modelos abren nuevos procesos y forma de abordar la arquitectura basada en las relaciones, flujos, movimientos y asociaciones que son caracterizados por diferentes patrones que vienen a alimentar todo el proceso del proyecto arquitectónico. El estudio de estos nuevos modelos nos indica las cualidades que puede ofrecer la revisión de estos métodos para empezar a tratar nuevas cuestiones que hoy en día parecen ser, permanentemente, parte de la condición urbana. XII ABSTRACT This thesis deals with the study of the so-called mat buildings which emerged between the fifties and sixties of the last century. Mat, or carpet, buildings appeared largely as a result of the CIAM’s disagreement and dissatisfaction with functionalist reductionism and the principles of functional compartmentalisation. These new models replaced the model of the city, seen as a collection of individual buildings, with the concept of an urban pattern. It is not the sum of the length, height and width but rather a dense, two- dimensional mat with a configuration of forms offering both a repetitive order and an infinite diversity of sequences with endless possibilities for adaptation, where man lives and circulates. These characteristics, which appeared in the works of many of the architects who formed part of Team X, are those that Alison Smithson started to reveal in her article with the aim of manifesting a new sensibility and a new way of understanding and seeing architecture. Mat buildings and clusters were the codes used by different members of Team X to plan an alternative architecture and urbanism to that proposed by the CIAM. With them, they found the path for a new aesthetic of connection, with a shift from a deterministic concept of the architectural form (closed and generally defined a priori) towards a more free, more open attitude based not so much on the integrity of the overall form but on the intensity of its internal networks and different levels of association. The end purpose of this thesis is to question whether this type of building, the basic principle of which is always an open geometric matrix (grid, recticle, network) with unlimited growth, can redefine the boundary between city and building and, thus, between public and private, individual and collective, structural and infrastructural, and permanent and variable. To this end, an in-depth historical and critical study of mat buildings is presented, analysing carefully and in chronological order five of the most paradigmatic works of this style: the Orphanage in Amsterdam, by Aldo Van Eyck; the Free University of Berlin, by Candilis, Josic and Woods; Venice Hospital, by Le Corbusier and Guillermo Jullián de la Fuente; the Centraal Beheer administration building in Apeldoorn, by Herman Hertzberger; and lastly, the MUSAC (Contemporary Art Museum) in León, designed by Mansilla and Tuñon. The first four works are from the Team X period and were the precursors to many other projects that would appear later. The last work analysed, the MUSAC, is studied together with some works by Japanese architect Sou Fujimoto and other contemporary cases to show how architects with very different perspectives revert to these models of limitless growth. Through the study of several contemporary examples we examine the repercussions, transformations and evolutions these models have had. The contrasted research XIII allows us to properly appreciate the importance of these models and the changes in forms and processes that came with the emergence of the idea of field in the contemporary arena and the paradigm shifts it entailed. These new models opened up new processes and a way of approaching architecture based on relationships, flows, movements and associations characterised by different patterns that feed the entire process of the architectural project. The study of these new models shows us the benefits that a review of these methods can contribute to addressing new issues that today appear to be a permanent part of the urban condition.

Multiprotocol Android Application for Smart Control and Monitoring in Buildings

This paper presents a multiprotocol mobile application for building automation which supports and enables the integration of the most representative control technologies such as KNX, LonWorks and X-10. The application includes a real-time monitoring service. Finally, advanced control functionalities based on gestures recognition and predefined scenes have been implemented. This application has been developed and tested in the Energy Efficiency Research Facility located at CeDInt-UPM, where electrical loads, blinds and HVAC and lighting systems can be controlled.