Effect of deuteration on the electrical conductivity, dielectric constant and phase transitions in LiNH4SO4

Measurements of dc conductivity and dielectric constant show that deuteration causes an upward shift of the high temperature phase transition point from 186.5 to 191°C and a downward shift of the low temperature transition point from 10 to -1.5°C in LiNH4SO4. Mechanisms of phase transitions and of electrical transport in the crystal are discussed.

EPDM/CIIR Blends: Compatibility, Morphology and Physical Properties

A detailed study of the blends of ethylene-propylene-diene rubber (EPDM) and chlorobutyl rubber (CIIR) is proposed in this study. These blends may find application in the manufacture of curing diaphragms/curing envelopes for tire curing applications. EPDM possesses better physical properties such as high heat resistance, ozone resistance, cold and moisture resistance, high resistance to permanent defonnation, very good resistance to flex cracking and impact. Because of the low gas and moisture penneability, good weathering resistance and high thermal stability of CIIR, blends of EPDM with CIlR may be attractive, if sufficient mechanical strength can be developed. Although a lot of work has been done on elastomer blends, studies on the blends of EPDM and CIIR rubbers are meagre. Hence in this investigation it is proposed to make a systematic study on the characteristics of EPDM and CIIR rubber blends.The mechanical and physical properties of an elastomer blend depend mainly on the blend compatibility. So in the first part of the study, it is proposed to develop compatible blends of EPDM with CIIR. Various commercial grades of ethylenepropylene- diene rubber are proposed to be blended with a specific grade of chlorobutyl rubber at varying proportions. The extent of compatibility in these blends is proposed to be evaluated based on their mechanical properties such as tensile strength, tear strength and ageing resistance. In addition to the physical property measurements, blend compatibility is also proposed to be studied based on the glass transition behavlour of the blends in relation to the Tg's of the individual components using Differential Scanning Calorimetry (DSC) and Dynamic Mechanical Analysis (DMA). The phase morphology of the blends is also proposed to be investigated by Scanning Electron Microscopy (SEM) studies of the tensile fracture surfaces. In the case of incompatible blends, the effect of addition of chlorosulfonated polyethylene as a compatibiliser is also proposed to be investigated.In the second part of the study, the effect of sulphur curing and resin curing on the curing behaviour and the vulcanizate properties of EPDM/CIIR blends are planned to be evaluated. Since the properties of rubber vulcanizates are determined by their network structures, it is proposed to determine the network structure of the vulcanizates by chemical probes so as to correlate it with the mechanical properties.In the third part of the work, the effect of partial precuring of one of the components prior to blending as a possible means of improving the properties of the blend is proposed to be investigated. This procedure may also help to bring down the viscosity mismatch between the constituent e1astomers and provide covulcanization of the blend.The rheological characteristics and processability of the blends are proposed to be investigated in the last part of the study. To explore their possible applications, the air permeability of the blend samples at varying temperatures is proposed to be measured. The thermal diffusivity behaviour of EPDM/CIlR blends is also proposed to be investigated using novel laser technique. The thermal diffusivity of the blends along with the thermal degradation resistance may help to determine whether the blends are suitable for high temperature applications such as in the manufacturing of curing envelope.

Novel adhesive systems based on neoprene-phenolic blends

The aim of the investigation is to develop new high performance adhesive systems based on neoprene-phenolic blends. Initially the effect of addition of all possible ingredients like fillers, adhesion promoters, curing agents and their optimum compositions to neoprene solution is investigated. The phenolic resin used is a copolymer of phenol-cardanolformaldehyde prepared in the laboratory. The optimum ratio between phenol and cardanol that gives the maximum bond strength in metal-metal, rubber-rubber and rubber-metal specimens has been identified. Further the ratio between total phenols and formaldehyde is also optimised. The above adhesive system is further modified by the addition of epoxidized phenolic novolacs. For this purpose, phenolic novolac resins are prepared in different stoichiometric ratios and are subsequently epoxidized. The effectiveness of the adhesive for bonding different metal and rubber substrates is another part of the study. To study the ageing behaviour, different bonded specimens are exposed to high temperature, hot water and salt water and adhesive properties have been evaluated. The synthesized resins have been characterized by FTIR , HNMR spectroscopy. The molecular weights of the resins have been obtained by GPC. Thermogravimetric analysis and differential scanning calorimetry are used to study the thermal properties. The fractured surface analysis is studied by scanning electron microscopy. The study has brought to light the influence of phenol/ formaldehyde stoichiometric ratio, addition of cardanol (a renewable resource), adhesion promoters and suitability of the adhesive for different substrates and the age resistance of adhesive joints among other things.

Development of Free Space Method for Material Characterisation and GPR Study & A Case Study on Biological Samples

The thesis mainly focuses on material characterization in different environments: freely available samples taken in planar fonn, biological samples available in small quantities and buried objects.Free space method, finds many applications in the fields of industry, medicine and communication. As it is a non-contact method, it can be employed for monitoring the electrical properties of materials moving through a conveyor belt in real time. Also, measurement on such systems at high temperature is possible. NID theory can be applied to the characterization of thin films. Dielectric properties of thin films deposited on any dielectric substrate can be determined. ln chemical industry, the stages of a chemical reaction can be monitored online. Online monitoring will be more efficient as it saves time and avoids risk of sample collection.Dielectric contrast is one of the main factors, which decides the detectability of a system. lt could be noted that the two dielectric objects of same dielectric constant 3.2 (s, of plastic mine) placed in a medium of dielectric constant 2.56 (er of sand) could even be detected employing the time domain analysis of the reflected signal. This type of detection finds strategic importance as it provides solution to the problem of clearance of non-metallic mines. The demining of these mines using the conventional techniques had been proved futile. The studies on the detection of voids and leakage in pipes find many applications.The determined electrical properties of tissues can be used for numerical modeling of cells, microwave imaging, SAR test etc. All these techniques need the accurate determination of dielectric constant. ln the modem world, the use of cellular and other wireless communication systems is booming up. At the same time people are concemed about the hazardous effects of microwaves on living cells. The effect is usually studied on human phantom models. The construction of the models requires the knowledge of the dielectric parameters of the various body tissues. lt is in this context that the present study gains significance. The case study on biological samples shows that the properties of normal and infected body tissues are different. Even though the change in the dielectric properties of infected samples from that of normal one may not be a clear evidence of an ailment, it is an indication of some disorder.ln medical field, the free space method may be adapted for imaging the biological samples. This method can also be used in wireless technology. Evaluation of electrical properties and attenuation of obstacles in the path of RF waves can be done using free waves. An intelligent system for controlling the power output or frequency depending on the feed back values of the attenuation may be developed.The simulation employed in GPR can be extended for the exploration of the effects due to the factors such as the different proportion of water content in the soil, the level and roughness of the soil etc on the reflected signal. This may find applications in geological explorations. ln the detection of mines, a state-of-the art technique for scanning and imaging an active mine field can be developed using GPR. The probing antenna can be attached to a robotic arm capable of three degrees of rotation and the whole detecting system can be housed in a military vehicle. In industry, a system based on the GPR principle can be developed for monitoring liquid or gas through a pipe, as pipe with and without the sample gives different reflection responses. lt may also be implemented for the online monitoring of different stages of extraction and purification of crude petroleum in a plant.Since biological samples show fluctuation in the dielectric nature with time and other physiological conditions, more investigation in this direction should be done. The infected cells at various stages of advancement and the normal cells should be analysed. The results from these comparative studies can be utilized for the detection of the onset of such diseases. Studying the properties of infected tissues at different stages, the threshold of detectability of infected cells can be determined.

Investigations on the structural, optical and Magnetic properties of nanostructured cerium oxide in pure and doped forms and its polymer nanocomposiets

This thesis Entitled INVESTIGATIONS ON THE STRUCTURAL, OPTICAL AND MAGNETIC PROPERTIES OF NANOSTRUCTURED CERIUM OXIDE IN PURE AND DOPED FORMS AND ITS POLYMER NANOCOMPOSITES.Synthesis and processing of nanomatelials and nanostmctures are the essential aspects of nanotechnology. Studies on new physical properties and applications of nanomaterials and nanostructures are possible only when nanostructured materials are made available with desired size, morphology,crystal structure and chemical composition.Recently, several methods have been developed to prepare pure and doped CeO2 powder, including wet chemical synthesis, thermal hydrolysis, flux method, hydrothermal synthesis, gas condensation method, microwave technique etc. In all these, some special reaction conditions, such as high temperature, high pressure, capping agents, expensive or toxic solvents etc. have been involved.Another hi gh-li ght of the present work is room temperature ferromagnetism in cerium oxdie thin films deposited by spray pyrolysis technique.The observation of self trapped exciton mediated PL in ceria nanocrystals is another important outcome of the present study. STE mediated mechanism has been proposed for CeO2 nanocrystals based on the dependence of PL intensity on the annealing temperature. It would be interesting to extent these investigations to the doped forms of cerium oxide and cerium oxide thin films to get deeper Insight into STE mechanism.Due to time constraints detailed investigations could not be canied out on the preparation and properties of free standing films of polymer/ceria nanocomposites. It has been observed that good quality free standing films of PVDF/ceria, PS/C61‘l8, PMMA/ceria can be obtained using solution casting technique. These polymer nanocomposite films show high dielectric constant around 20 and offer prospects of applications as gate electrodes in metal-oxide semiconductor devices.

Photoacoustic investigation of the optical and thermal properties of selected amorphous chalcogenide semiconductors

This thesis work has mainly concentrated on the investigation of the ,optical and thermal properties of binary semiconducting chalcogenide glasses belonging to the AivB¥5x and AZBXEX families. The technique used for these studies is a relatively new one namely, the photoacoustic (PA) technique. This technique is based on the detection of acoustic signal produced in an enclosed volume when the sample is irradiated by an intensity modulated radiation. The signal produced depends upon the optical properties of the sample, and the thermal properties of the sample, backing material and the surrounding gas. For the present studies an efficient signal beam gas-microphone PA spectrometer, consisting of a high power Xenon lamp, monochromator, light beam chopper, PA cell with microphone and lock-in amplifier, has been set up. Two PA cells have been fabricated: one for room temperature measurements and another for measurements at high temperatures. With the high temperature PA cell measurements can be taken upto 250°C. Provisions are incorporated. in both the cells to change the volume and to use different backing materials for the sample. The cells have been calibrated by measuring the frequency response of the cells using carbon black as the sample

Optical and thermal characterization of dye intercalated montmorillonites and rare earth doped materials

The advent of high optical quality transparent nano—structured glasses, the so-called transparent glass ceramics or vitroceramics disclosed the possibility of producing nano-sized photonic devices based on rare-earth doped up—converters. Transparent glass ceramics have been investigated as hosts for lanthanide ions envisioning the production of materials that are easy to shape and with high performance for photonic applications. Rare earth doped glasses have been extensively studied due to their potential applications in optical devices such as solid state lasers and optical fibers. Various photothermal and optical techniques have been successfully applied for the thermal and optical characterization of these rare earth doped materials. In the present thesis, the effective thermal parameters like thermal diffusivity and thermal effusivity of complex materials for various applications have been investigated using photothermal methods along with their optical characterization utilising the common optical absorption as well as fluorescence spectroscopic techniques. These sensitive optical procedures are also essential for exploiting these materials for further photonic applications.

Meteorological aspects of mud bank formation along south west coast of India

The study mainly intends to investigate the meteorological aspects associated with the formation of mud banks along southwest coast of India. During the formation of mud bank, the prominent monsoon organized convection is located in the equatorial region and relatively low clouding over Indian mainland. The wind core of the low level jet stream passes through the monsoon organized convection. When the monsoon organized convection is in the equatorial region, the low level wind over the southwest coast of India is parallel to the coastline and toward south. This wind along the coast gives rise to Ekman mass transport away from the coastline and subsequently formation of mud bank, if the high wind stress persists continuously for three or more days. As a result of the increased alongshore wind stress, the coastal upwelling increases. An increase in chlorophyll-a concentration and total chlorophyll can also be seen associated with mudbank formation

Production, purification and partial characterization of a novel protease from marine Engyodontium album BTMFS10 under solid state fermentation

Engyodontium album isolated from marine sediment produced protease, which was active at pH 11. Process parameters influencing the production of alkaline protease by marine E. album was optimized. Particle size of <425 mm, 60% initial moisture content and incubation at 25 8C for 120 h were optimal for protease production under solid state fermentation (SSF) using wheat bran. The organism has two optimal pH (5 and 10) for maximal enzyme production. Sucrose as carbon source, ammonium hydrogen carbonate as additional inorganic nitrogen source and amino acid leucine enhanced enzyme production during SSF. The protease was purified and partially characterized. A 16-fold purified enzyme was obtained after ammonium sulphate precipitation and ion-exchange chromatography. Molecular weight of the purified enzyme protein was recorded approximately 38 kDa by SDS-PAGE. The enzyme showed maximum activity at pH 11 and 60 8C. Activity at high temperature and high alkaline pH suggests suitability of the enzyme for its application in detergent industry

Development of ready-to-eat extruded fish based noodles in semi-rigid containers”

Fish and fishery products are having a unique place in global food market due to its unique taste and flavour; moreover, the presence of easily digestible proteins, lipids, vitamins and minerals make it a highly demanded food commodity.Fishery products constitute a major portion of international trade, which is a valuable source of foreign exchange to many developing countries.Several new technologies are emerging to produce various value added products from food; “extrusion technology” is one among them. Food extruder is a better choice for producing a wide variety of high value products at low volume because of its versatility. Extruded products are shelf-stable at ambient temperature. Extrusion cooking is used in the manufacture of food products such as ready-to-eat breakfast cereals, expanded snacks, pasta, fat-bread, soup and drink bases. The raw materialin the form of powder at ambient temperature is fed into extruder at a known feeding rate. The material first gets compacted and then softens and gelatinizes and/or melts to form a plasticized material, which flows downstream into extruder channel and the final quality of the end products depends on the characteristics of starch in the cereals and protein ingredient as affected by extrusion process. The advantages of extrusion process are the process is thermodynamically most efficient, high temperature short time enables destruction of bacteria and anti-nutritional factors, one step cooking process thereby minimizing wastage and destruction of fat hydrolyzing enzymes during extrusion process and enzymes associated with rancidity.

Immunologisches Reaktionsvermögen als Indikator für Belastungen bei der Milchkuh

Mit ansteigenden Jahresmilchleistungen werden die Kühe einer hohen metabolischen Belastung ausgesetzt, die bei einer suboptimalen Gestaltung der Lebensbedingungen mit einer Erhöhung der Inzidenzrate von Faktorenkrankheiten einhergehen kann. Im Vordergrund der Untersuchungen stand die Frage, inwieweit metabolische Belastungszustände von Milchkühen in der Phase des Puerperiums und in Abhängigkeit von der Milchleistung sowie Belastungen durch eine klinische Erkrankung zu Beginn der Laktation mit Hilfe von Parametern der immunologischen Abwehr und der Reaktion des Immunsystems auf eine Challenge dargestellt werden können. In die Untersuchung wurden insgesamt 68 klinisch gesunde sowie 20 klinisch erkrankte Milchkühe der Rasse Holstein Friesian einbezogen. Die Untersuchungen erfolgten in den Zeiträumen 10-21 Tage sowie 14-15 Wochen nach der Kalbung. Dazu wurden an jeweils drei Untersuchungstagen (Tag 0, 2, 7) Blutproben aus der Vena jugularis entnommen. Zur Stimulierung des unspezifischen Immunsystems wurde in beiden Versuchszeiträumen an den Untersuchungstagen 0 und 2 der Paramunitätsinducer Zylexis® appliziert. Ferner wurde den Kühen zu Beginn der Laktation der Tollwutimpfstoff Rabisin® verabreicht. Für die Auswertung wurden die untersuchten Milchkühe in Gruppen unterteilt. Die klinisch gesunden Kühe wurden anhand der nach Fett und Eiweiß korrigierten 305-Tage-Leistung in die Gruppe M = mittleres Leistungsniveau (Milchmengenleistung 6.500-8.990 kg) und die Gruppe H = hohes Leistungsniveau (Milchmengenleistung 9.000-12.500 kg) aufgeteilt. Die klinisch erkrankten Kühe wurden in der Gruppe K zusammengefasst. Zur Beurteilung der Immunabwehr wurden die Parameter Phagozytoseaktivität der isolierten Neutrophilen Granulozyten, die Vollblutbakterizidie, die Lymphozytenproliferation mit den Mitogenen ConA, PHA und PWM sowie die spezifische Antikörperbildung gegen Tollwut untersucht. Anhand der Parameter Phagozytoseaktivität, Vollblutbakterizidie und Lymphozytenproliferation wurde zusätzlich die Reaktion auf die Challenge mit dem Paramunitätsinducer Zylexis® überprüft. Zur Erfassung der metabolischen Belastungszustände wurden verschiedene Stoffwechselparameter und hämatologische Parameter erfasst. Zu Beginn der Laktation konnten bei den Kühen in der mittleren und hohen Leistungsgruppe signifikant höhere Konzentrationen an ß-Hydroxybuttersäure und Freien Fettsäuren im Vergleich zu der Laktationsmitte festgestellt werden. Die Kühe mit einem hohen Leistungsniveau zeigten darüber hinaus eine signifikant höhere Bilirubinkonzentration am Laktationsanfang gegenüber der Laktationsmitte. Die mittlere Konzentration der freien Fettsäuren lag bei den Kühen in beiden Leistungsgruppen oberhalb des Referenzbereiches und wies auf eine negative Energiebilanz zu Laktationsbeginn hin. Die mittleren Konzentrationen bzw. Enzymaktivitäten der Parameter Cholesterol, Harnstoff, AST, GLDH, γ-GT, Gesamtprotein, Kalzium und Phosphor wiesen in der Laktationsmitte signifikant höhere Werte als am Laktationsanfang auf. Dabei lagen die mittleren Enzymaktivitäten von AST und GLDH sowie die Konzentrationen von Harnstoff und Gesamtprotein in der Laktationsmitte oberhalb des Referenzbereiches. Die untersuchten Stoffwechselparameter wurden durch die Challenge mit einem Paramunitätsinducer nicht signifikant beeinflusst. Hinsichtlich der Immunparameter zeigten die Milchkühe mit einem mittleren Leistungsniveau in Abhängigkeit vom Laktationszeitpunkt zu Beginn der Laktation eine signifikant höhere Phagozytoseaktivität gegenüber der Laktationsmitte (p < 0,05). Die Gruppe mit einem hohen Leistungsniveau wies dagegen keine signifikanten Unterschiede in der Phagozytoseaktivität zwischen den beiden Untersuchungszeiträumen auf. Bei den Immunparametern Vollblutbakterizidie und Lymphozytenproliferation konnten bei den Kühen beider Gruppen keine signifikanten Unterschiede in Abhängigkeit vom Laktationszeitpunkt festgestellt werden. Im Hinblick auf die Milchleistung wiesen die Kühe in den beiden Leistungsgruppen am Untersuchungstag 0 weder zu Beginn noch in der Mitte der Laktation signifikante Unterschiede bezüglich der untersuchten Immunparameter auf. Nach der Challenge durch den Paramunitätsinducer reagierten einzig die Kühe mit einer mittleren Leistung zu Beginn der Laktation auf die Challenge mit einer signifikanten Reduzierung der mittleren Phagozytoseaktivität von Tag 0 zu Tag 2 (p < 0,05). Bei den weiteren untersuchten Immunparametern konnten weder bei den Kühen mit einer mittleren noch mit einer hohen Leistung eine signifikante Reaktion auf die Challenge nachgewiesen werden. Die klinisch erkrankten Kühe zeigten im Vergleich zu den klinisch gesunden Kühen keine unterschiedlichen Konzentrationen bzw. Aktivitäten der untersuchten Stoffwechselparameter. Auch konnten anhand der immunologischen Parameter und der Reaktion auf die Challenge keine Unterschiede zwischen den klinisch gesunden Kühen festgestellt werden. Die in der vorliegenden Untersuchung geprüften metabolischen Belastungen konnten weder anhand der Immunparameter noch durch die Reaktion der Immunparameter auf eine Challenge dargestellt werden. Es wird geschlussfolgert, dass das immunologische Reaktionsvermögen nicht geeignet ist, um als Indikator für Belastungszustände bei der Milchkuh herangezogen zu werden.

Development of hybrid UV VCSEL with organic active material and dielectric DBR mirrors for medical, sensoric and data storage applications

Lasers play an important role for medical, sensoric and data storage devices. This thesis is focused on design, technology development, fabrication and characterization of hybrid ultraviolet Vertical-Cavity Surface-Emitting Lasers (UV VCSEL) with organic laser-active material and inorganic distributed Bragg reflectors (DBR). Multilayer structures with different layer thicknesses, refractive indices and absorption coefficients of the inorganic materials were studied using theoretical model calculations. During the simulations the structure parameters such as materials and thicknesses have been varied. This procedure was repeated several times during the design optimization process including also the feedback from technology and characterization. Two types of VCSEL devices were investigated. The first is an index coupled structure consisting of bottom and top DBR dielectric mirrors. In the space in between them is the cavity, which includes active region and defines the spectral gain profile. In this configuration the maximum electrical field is concentrated in the cavity and can destroy the chemical structure of the active material. The second type of laser is a so called complex coupled VCSEL. In this structure the active material is placed not only in the cavity but also in parts of the DBR structure. The simulations show that such a distribution of the active material reduces the required pumping power for reaching lasing threshold. High efficiency is achieved by substituting the dielectric material with high refractive index for the periods closer to the cavity. The inorganic materials for the DBR mirrors have been deposited by Plasma- Enhanced Chemical Vapor Deposition (PECVD) and Dual Ion Beam Sputtering (DIBS) machines. Extended optimizations of the technological processes have been performed. All the processes are carried out in a clean room Class 1 and Class 10000. The optical properties and the thicknesses of the layers are measured in-situ by spectroscopic ellipsometry and spectroscopic reflectometry. The surface roughness is analyzed by atomic force microscopy (AFM) and images of the devices are taken with scanning electron microscope (SEM). The silicon dioxide (SiO2) and silicon nitride (Si3N4) layers deposited by the PECVD machine show defects of the material structure and have higher absorption in the ultra violet range compared to ion beam deposition (IBD). This results in low reflectivity of the DBR mirrors and also reduces the optical properties of the VCSEL devices. However PECVD has the advantage that the stress in the layers can be tuned and compensated, in contrast to IBD at the moment. A sputtering machine Ionsys 1000 produced by Roth&Rau company, is used for the deposition of silicon dioxide (SiO2), silicon nitride (Si3N4), aluminum oxide (Al2O3) and zirconium dioxide (ZrO2). The chamber is equipped with main (sputter) and assisted ion sources. The dielectric materials were optimized by introducing additional oxygen and nitrogen into the chamber. DBR mirrors with different material combinations were deposited. The measured optical properties of the fabricated multilayer structures show an excellent agreement with the results of theoretical model calculations. The layers deposited by puttering show high compressive stress. As an active region a novel organic material with spiro-linked molecules is used. Two different materials have been evaporated by utilizing a dye evaporation machine in the clean room of the department Makromolekulare Chemie und Molekulare Materialien (mmCmm). The Spiro-Octopus-1 organic material has a maximum emission at the wavelength λemission = 395 nm and the Spiro-Pphenal has a maximum emission at the wavelength λemission = 418 nm. Both of them have high refractive index and can be combined with low refractive index materials like silicon dioxide (SiO2). The sputtering method shows excellent optical quality of the deposited materials and high reflection of the multilayer structures. The bottom DBR mirrors for all VCSEL devices were deposited by the DIBS machine, whereas the top DBR mirror deposited either by PECVD or by combination of PECVD and DIBS. The fabricated VCSEL structures were optically pumped by nitrogen laser at wavelength λpumping = 337 nm. The emission was measured by spectrometer. A radiation of the VCSEL structure at wavelength 392 nm and 420 nm is observed.

Anàlisi tèrmica de l'obtenció d'òxids de ceri a partir de precursors moleculars

El projecte consisteix en l’anàlisi tèrmica de l’obtenció d’òxids de ceri a partir de precursors moleculars com són el propionat de ceri (III), el propionat de ceri (III) dopat amb gadolini i el propionat de ceri (III) dopat amb zirconi. Els òxids resultants són materials superconductors que ofereixen una resistència nul•la al pas del corrent en determinades condicions. Per realitzar l’estudi hem fet servir quatre tècniques diferents: termogravimetria, calorimetria diferencial, espectrometria de masses i difracció de raigs-x

Escala NEDOCS para medir congestión en urgencias: estudio de validación en Colombia

Introducción: En Colombia, no existe una herramienta para cuantificar el grado de congestión de los servicios de urgencias que sea aplicable a su realidad. Por esta razón, este trabajo busca determinar si la escala NEDOCS es una herramienta válida para medir el grado de congestión en este medio. Métodos: Se calculó la escala durante un período de tres semanas, durante 6 veces en el día a la misma hora en las tres instituciones. Para la validación, se comparó la escala NEDOCS contra dos escalas tipo Likert de 6 preguntas. Además, se describió el porcentaje de la demanda no atendida y del número de quejas. Resultados: Para la escala, la variabilidad se explica en 88 %. Por otro lado, la correlación entre la severidad en la congestión de los últimos 3 ítems de la escala con las opiniones subjetivas fue directa y significativa (r = 1,000., p < 0.000). Se obtuvo una correspondencia significativa con las siguientes variables: a) disponibilidad de camas (r = 0.7, p < 0.001); b) promedio de tiempo de espera, (r = 0,56, p < 0.021). Discusión: Dado que no existe gold standard, las mediciones de la escala en comparación con las opiniones del personal arrojan que la escala NEDOCS aplicada en los servicios de urgencias colombianos es útil para medir congestión. Se observó como fenómeno especial que el personal se encuentra acostumbrado a “vivir con la congestión”, por lo cual el personal considera como congestión del servicio los momentos de alto stress laboral.

Adsorbents a partir de fangs biològics excedents de depuradora mitjançant l'aplicació de microones: estudi d'obtenció, caracterització i aplicació en fase líquida

El fang biològic es produeix en les plantes de tractament d'aigües residuals urbanes i industrials. El tractament i la gestió dels fangs és un dels problemes més importants en el camp del tractament de les aigües residuals. Aquesta situació es preveu que es veurà agreujada en el futur, per un increment del volum de fang produït associat a l'exigència de nivells més alts de depuració i per l'augment dels nombre d'estacions depuradores en funcionament. D'altre banda, les limitacions que presenten les opcions tradicionals de gestió dels fangs, fa necessari buscar solucions innovadores i efectives per a solucionar el problema que suposa la gestió d'aquests fangs biològics. Els fangs biològics són de naturalesa carbonosa i amb un alt contingut de matèria orgànica. Aquestes característiques, permeten la conversió del fang en un sòlid adsorbent de tipus carbonós. Aquesta conversió ofereix el doble benefici de reduir el volum de fang que ha de ser gestionat i alhora produir un adsorbent amb un cost inferior a la dels adsorbents convencionals (carbons actius comercials). Fins el moment, els tractaments alta temperatura han demostrat la seva efectivitat per du a terme el procés de transformació dels excedents de fang biològic en un sòlid adsorbent carbonós (carbó actiu). Com a alternativa a aquests processos a alta temperatura, es proposa un nou procés d'obtenció d'un sòlid adsorbent carbonós a partir dels excedents de fangs biològics, mitjançant un tractament a baixa temperatura, combinant el tractament per microones amb l'addició d'un reactiu químic (H2SO4). La present tesi analitza el tractament dels excedents de fangs biològics utilitzant un tractament mitjançant microones i l'addició d'àcid sulfúric (H2SO4), al mateix temps analitza la possibilitat d'utilitzar els sòlids adsorbents obtinguts per a millorar la qualitat de les aigües residuals. Paràmetres d'operació com poden ser la quantitat d'àcid sulfúric addicionada al fang, el nivell de potència del forn microones i el temps de tractament, es modificaran per tal de determinar la influència que poden tenir sobre la qualitat del sòlid adsorbent. Un cop determinada la qualitat dels diferent sòlids adsorbents s'avalua la seva capacitat per a l'eliminació de colorant i metalls en fase líquida. Els resultats obtinguts es comparen amb els obtinguts per un carbó actiu derivat de fangs i un carbó actiu comercial.