Small farmers and sustainability: institutional barriers to investment and innovation in the Malaysian palm oil industry in Sabah

The Malaysian palm oil industry is well known for the social, environmental and sustainability challenges associated with its rapid growth over the past ten years. Technologies exist to reduce the conflict between national development aims of economic uplift for the rural poor, on the one hand, and ecological conservation, on the other hand, by raising yields and incomes from areas already under cultivation. But the uptake of these technologies has been slow, particularly in the smallholder sector. In this paper we explore the societal and institutional challenges that influence the investment and innovation decisions of micro and small enterprise (MSE) palm oil smallholders in Sabah, Malaysia. Based on interviews with 38 smallholders, we identify a number of factors that reduce the smallholders' propensity to invest in more sustainable practices. We discuss why more effective practices and innovations are not being adopted using the concepts of, firstly, institutional logics to explore the internal dynamics of smallholder production systems, including attitudes to sustainability and innovation; and, secondly, institutional context to explore the pressures the smallholders face, including problems of access to land, labour, capital, knowledge and technical resources. These factors include limited access to global market information, corruption and uncertainties of legal title, weak economic status and social exclusion. In discussing these factors we seek to contribute to wider theoretical debates about the factors that block innovation and investment in business improvements in marginal regions and in marginalised groups.

Cultivo de Eucalyptus urograndis em atmosfera enriquecida com CO2: mudanças no proteoma cloroplastidial

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Constructing Cultural Policies in Romania. A possible model for communicating the national value system

The premise of this paper is that a model for communicating the national value system must start from a strategy aimed at the identification, the cultivation and communication of values that give consistency to the value system. The analysis concentrates on the elements of such strategies and on the implications of applying a value communication program on the identity architecture of the community. The paper will also discuss the role of the national value system in the context of the emerging global culture, where the individual has the power to create his/her own hybrid cultural model.

Sustainability and economic evaluation of microalgae grown in brewery wastewater

This article evaluates the sustainability and economic potential of microalgae grown in brewery wastewater for biodiesel and biomass production. Three sustainability and two economic indicators were considered in the evaluation within a life cycle perspective. For the production system the most efficient process units were selected. Results show that harvesting and oil separation are the main process bottlenecks. Microalgae with higher lipid content and productivity are desirable for biodiesel production, although comparable to other biofuel’s feedstock concerning sustainability. However, improvements are still needed to reach the performance level of fossil diesel. Profitability reaches a limit for larger cultivation areas, being higher when extracted biomass is sold together with microalgae oil, in which case the influence of lipid content and areal productivity is smaller. The values of oil and/or biomass prices calculated to ensure that the process is economically sound are still very high compared with other fuel options, especially biodiesel.

Sustainability Evaluation of Biodiesel Produced from Microalgae Chlamydomonas sp Grown in Brewery Wastewater

This study performs a sustainability evaluation of biodiesel from microalga Chlamydomonas sp. grown in 20 % (v/v) of brewery’s wastewater, blended with pentose sugars (xylose, arabinose or ribose resulting from the hydrolysis of brewer’s spent grains (BSG). The life cycle steps considered for the study are: microalgae cultivation, biomass processing and lipids extraction at the brewery site, and its conversion to biodiesel at a dedicated external biofuel’s plant. Three sustainability indicators (LCEE, FER and GW) were considered and calculated using experimental data. Literature data was used, whenever necessary, to complement life cycle data, thus allowing a more accurate sustainability evaluation. A comparative analysis of the biodiesel life cycle steps was also conducted, with the main goal of identifying which steps need to be improved. Results show that biomass processing, especially cell harvesting, microalgae cultivation, and lipids extraction are the main process bottlenecks. It is also analysed the influence on the microalgae biodiesel sustainability of adding each pentose sugar to the cultivation media, concluding that it strongly influences the biomass and lipid productivity. In particular, the addition of xylose is preferable in terms of lipid productivity, but from a sustainability point of view, ribose is the best, though the difference from xylose is not significant. Nevertheless, culture without pentose addition presents the best sustainability results.

Viabilidade económica e energética do biodiesel produzido a partir de Chlorella vulgaris

Contemporaneamente o Homem depara-se com um dos grandes desafios que é o de efetivar a transição para um futuro sustentável. Assim, o setor da energia tem um papel fundamental neste processo de transição, com principal enfoque no setor dos automóveis, sendo este um setor que contribui com elevadas quantidades de gases de efeito estufa libertados para a atmosfera. Também a escassez dos recursos petrolíferos constitui um ponto fundamental no tema apresentado. Com a necessidade de combater esses problemas é que se tem vindo a tentar desenvolver combustíveis renováveis e neutros quanto às emissões. A primeira geração de biocombustíveis obtidos através de culturas agrícolas terrestres preenche em parte esses requisitos, porém, não atinge os valores da procura e ainda competem com a produção de alimentos. Daí o interesse na aposta de uma segunda geração de biocombustíveis produzidos de fontes que não pertencem à cadeia alimentar e são residuais mas, que mesmo assim não permitem satisfazer as necessidades de matériaprima. A terceira geração de biocombustíveis vem justamente responder a estas questões pois assenta em matérias-primas que não competem pela utilização do solo agrícola nem são usadas para fins alimentares, tendo produtividades areais substancialmente superiores às que as culturas convencionais ou biomassas residuais conseguem assegurar. A matéria prima de terceira geração são portanto as microalgas, cujas produtividades em biomassa são extremamente elevadas, para além de produtividades muito superiores em lípidos, hidratos de carbono e/ou outros produtos de valor elevado. No entanto, este tipo de produção de biocombustível ainda enfrenta alguns problemas técnicos que o tornam num processo dispendioso para competir economicamente com outros tipos de produção de biodiesel. Na linha do que foi dito anteriormente, este trabalho apresenta um estudo de viabilidade económica e energética do biodiesel produzido através da Chlorella vulgaris, apresentando as técnicas e resultados de cultivo da Chlorella vulgaris e posteriormente de produção do biodiesel através dos lípidos obtidos através da mesma. Para melhorar a colheita das microalgas, que é uma das fases mais dispendiosas, testou-se o aumento de pH e a adição de um floculante (Pax XL-10), sendo que o primeiro não permitiu obter resultados satisfatórios, enquanto o segundo permitiu obter resultados de rendimento na ordem dos 90%. Mesmo com a melhoria da etapa da colheita, o preço mínimo do biodiesel produzido a partir do óleo de Chlorella vulgaris, com as condições ótimas de cultivo e produtividades máximas encontradas na literatura, foi de 8,76 €/L, pois, na análise económica, o Pax XL-10 revelou-se extremamente caro para utilizar na floculação de microalgas para obtenção de um produto de baixo valor, como é o biodiesel. A não utilização da floculação reduz o preço do biodiesel para 7,85 €/L. O que se pode concluir deste trabalho é que face às técnicas utilizadas, a produção de biodiesel Chlorella vulgaris apenas, não é economicamente viável, pelo que para viabilizar a sustentabilidade do processo seria ainda necessário desenvolver mais esforços no sentido de otimizar a produção de biodiesel, eventualmente associando-a à produção de um outro biocombustível produzido a partir da biomassa extraída residual e/ou da recuperação de outros produtos de maior valor.

Análise Económica da Produção de Óleo a Partir de Microalgas

Os biocombustíveis apresentam um interessante potencial de redução da dependência energética relativamente aos combustíveis fósseis. A produção de microalgas apresenta vários benefícios ambientais como sejam a utilização mais efetiva de terrenos, a captura de dióxido de carbono, a purificação de águas quando associada a um processo de tratamento de águas residuais e não provoca a disputa entre a produção de matéria-prima para alimentação e combustíveis. A cultura de microalgas para a produção de biodiesel tem recebido uma grande atenção nos últimos anos devido ao seu potencial. Neste trabalho pretende-se criar as etapas de processamento das microalgas em biodiesel onde são implementadas medidas de eficiência energética e aproveitamento de fontes poluidoras como o CO2. Para isso, formulou-se um modelo no programa Aspen Plus para simulação do processo desde a produção, colheita até à extração de óleo das microalgas e posterior avaliação económica do mesmo. Concluiu-se que para o projeto fosse pago no tempo de vida útil seria preciso vender o óleo a 13 $/kg. Aos preços atuais do óleo o projeto não é economicamente viável.

Cultivo e avaliação do potencial da microalga Chlorella zofingiensis para a produção de biodiesel e produtos de valor acrescentado

O presente trabalho tem como objetivo o cultivo da microalga Chlorella zofingiensis, e a avaliação da sua potencial aplicação na produção de biodiesel e de produtos de valor acrescentado, de entre os quais se destacam os antioxidantes. Com o intuito da produção de biocombustível é necessário efetuar o cultivo da microalga num volume que permita a obtenção de elevada quantidade de biomassa para a concretização do trabalho. Além deste biocombustível, existe ainda a possibilidade de valorização de alguns produtos com valor comercial, como é o caso da astaxantina, a saber na área farmacêutica, alimentar ou até mesmo cosmética. O cultivo da microalga foi feito em meio Bold’s Basal Medium (BBM), inicialmente em matrazes de 5 L e, quando se obteve uma cultura suficientemente densa, inocularam-se fotobiorreatores de 50 L. Conseguiu-se atingir uma concentração máxima de 0,76 g/L, no reator de 5 L, após cerca de 6 semanas de ensaio. Por sua vez, em fotobiorreatores de 50 L, a concentração máxima obtida foi de 0,4 g/L, após 4 semanas de ensaio. Nestas culturas foi possível obter-se uma percentagem lipídica de 7 %, apresentado concentração de pigmentos por litro de cultura na ordem dos 10 mg/L, 4 mg/L e 2 mg/L de clorofila a, clorofila b e carotenoides totais, respetivamente. Com esta percentagem lipídica recuperaram-se 400 mg de óleo, obtendo-se posteriormente 280 mg de biodiesel. Pela análise à amostra de biodiesel obtida foi possível obter o perfil lipídico desta microalga, quando cultivada em meio BBM, sendo 41% de ácido palmítico (C16:0), 9% de ácido esteárico (C18:0), 27% de ácido oleico (C18:1) e 23% de ácido linoleico (C18:2). Os resultados obtidos mostram que a Chlorella zofingiensis é uma microalga com interesse potencial para a produção de clorofila e carotenóides, mas não para o óleo para a produção de biodiesel.

Gas emissions on rice culture and its importance on air quality

Dissertação para obtenção do Grau de Mestre em Engenharia do Ambiente Perfil Gestão de Sistemas Ambientais

Production of chitin-glucan complex by Pichia pastoris

Dissertation for the Degree of Master in Biotechnology

Production of bacterial biopolymers from industrial fat-containing wastes

Dissertation presented in partial fulfilment of the Requirements for the Degree of Master in Biotechnology

Production and characterization of Chitin-Glucan Complex by Komagataella pastoris

This thesis was focused on the production, extraction and characterization of chitin:β-glucan complex (CGC). In this process, glycerol byproduct from the biodiesel industry was used as carbon source. The selected CGC producing yeast was Komagataella pastoris (formerly known as Pichia pastoris), due the fact that to achieved high cell densities using as carbon source glycerol from the biodiesel industry. Firstly, a screening of K. pastoris strains was performed in shake flask assays, in order to select the strain of K. pastoris with better performance, in terms of growth, using glycerol as a carbon source. K. pastoris strain DSM 70877 achieved higher final cell densities (92-97 g/l), using pure glycerol (99%, w/v) and in glycerol from the biodiesel industry (86%, w/v), respectively, compared to DSM 70382 strain (74-82 g/l). Based on these shake flask assays results, the wild type DSM 70877 strain was selected to proceed for cultivation in a 2 l bioreactor, using glycerol byproduct (40 g/l), as sole carbon source. Biomass production by K. pastoris was performed under controlled temperature and pH (30.0 ºC and 5.0, respectively). More than 100 g/l biomass was obtained in less than 48 h. The yield of biomass on a glycerol basis was 0.55 g/g during the batch phase and 0.63 g/g during the fed-batch phase. In order to optimize the downstream process, by increasing extraction and purification efficiency of CGC from K. pastoris biomass, several assays were performed. It was found that extraction with 5 M NaOH at 65 ºC, during 2 hours, associated to neutralization with HCl, followed by successive washing steps with deionised water until conductivity of ≤20μS/cm, increased CGC purity. The obtained copolymer, CGCpure, had a chitin:glucan molar ratio of 25:75 mol% close to commercial CGC samples extracted from A. niger mycelium, kiOsmetine from Kitozyme (30:70 mol%). CGCpure was characterized by solid-state Nuclear Magnetic Resonance (NMR) spectroscopy and Differential Scanning Calorimetry (DCS), revealing a CGC with higher purity than a CGC commercial (kiOsmetine). In order to optimize CGC production, a set of batch cultivation experiments was performed to evaluate the effect of pH (3.5–6.5) and temperature (20–40 ºC) on the specific cell growth rate, CGC production and polymer composition. Statistical tools (response surface methodology and central composite design) were used. The CGC content in the biomass and the volumetric productivity (rp) were not significantly affected within the tested pH and temperature ranges. In contrast, the effect of pH and temperature on the CGC molar ratio was more pronounced. The highest chitin: β-glucan molar ratio (> 14:86) was obtained for the mid-range pH (4.5-5.8) and temperatures (26–33 ºC). The ability of K. pastoris to synthesize CGC with different molar ratios as a function of pH and temperature is a feature that can be exploited to obtain tailored polymer compositions.(...)

Production of polyhydroxyalkanoates from oil-containing substrates

Different oil-containing substrates, namely, used cooking oil (UCO), fatty acids-byproduct from biodiesel production (FAB) and olive oil deodorizer distillate (OODD) were tested as inexpensive carbon sources for the production of polyhydroxyalkanoates (PHA) using twelve bacterial strains, in batch experiments. The OODD and FAB were exploited for the first time as alternative substrates for PHA production. Among the tested bacterial strains, Cupriavidus necator and Pseudomonas resinovorans exhibited the most promising results, producing poly-3-hydroxybutyrate, P(3HB), form UCO and OODD and mcl-PHA mainly composed of 3-hydroxyoctanoate (3HO) and 3-hydroxydecanoate (3HD) monomers from OODD, respectively. Afterwards, these bacterial strains were cultivated in bioreactor. C. necator were cultivated in bioreactor using UCO as carbon source. Different feeding strategies were tested for the bioreactor cultivation of C. necator, namely, batch, exponential feeding and DO-stat mode. The highest overall PHA productivity (12.6±0.78 g L-1 day-1) was obtained using DO-stat mode. Apparently, the different feeding regimes had no impact on polymer thermal properties. However, differences in polymer‟s molecular mass distribution were observed. C. necator was also tested in batch and fed-batch modes using a different type of oil-containing substrate, extracted from spent coffee grounds (SCG) by super critical carbon dioxide (sc-CO2). Under fed-batch mode (DO-stat), the overall PHA productivity were 4.7 g L-1 day-1 with a storage yield of 0.77 g g-1. Results showed that SCG can be a bioresource for production of PHA with interesting properties. Furthermore, P. resinovorans was cultivated using OODD as substrate in bioreactor under fed-batch mode (pulse feeding regime). The polymer was highly amorphous, as shown by its low crystallinity of 6±0.2%, with low melting and glass transition temperatures of 36±1.2 and -16±0.8 ºC, respectively. Due to its sticky behavior at room temperature, adhesiveness and mechanical properties were also studied. Its shear bond strength for wood (67±9.4 kPa) and glass (65±7.3 kPa) suggests it may be used for the development of biobased glues. Bioreactor operation and monitoring with oil-containing substrates is very challenging, since this substrate is water immiscible. Thus, near-infrared spectroscopy (NIR) was implemented for online monitoring of the C. necator cultivation with UCO, using a transflectance probe. Partial least squares (PLS) regression was applied to relate NIR spectra with biomass, UCO and PHA concentrations in the broth. The NIR predictions were compared with values obtained by offline reference methods. Prediction errors to these parameters were 1.18 g L-1, 2.37 g L-1 and 1.58 g L-1 for biomass, UCO and PHA, respectively, which indicates the suitability of the NIR spectroscopy method for online monitoring and as a method to assist bioreactor control. UCO and OODD are low cost substrates with potential to be used in PHA batch and fed-batch production. The use of NIR in this bioprocess also opened an opportunity for optimization and control of PHA production process.

Bioproduction of succinic acid from renewable feedstocks by Actinobacillus succinogenes 130Z

Succinic acid (SA) is a highly versatile building block that is used in a wide range of industrial applications. The biological production of succinic acid has emerged in the last years as an efficient alternative to the chemical production based on fossil fuels. However, in order to fully replace the competing petro-based chemical process from which it has been produced so far, some challenges remain to be surpassed. In particular, one main obstacle would be to reduce its production costs, mostly associated to the use of refined sugars. The present work is focused on the development of a sustainable and cost-e↵ective microbial production process based on cheap and renewable resources, such as agroindustrial wastes. Hence, glycerol and carob pods were identified as promising feedstocks and used as inexpensive carbon sources for the bioproduction of succinic acid by Actinobacillus succinogenes 130Z, one of the best naturally producing strains. Even though glycerol is a highly available carbon source, as by-product of biodiesel production, its consumption by A. succinogenes is impaired due to a redox imbalance during cell growth. However, the use of an external electron acceptor such as dimethylsulfoxide (DMSO) may improve glycerol metabolism and succinic acid production by this strain. As such, DMSO was tested as a co-substrate for glycerol consumption and concentrations of DMSO between 1 and 4% (v/v) greatly promoted glycerol consumption and SA production by this biocatalyst. Aiming at obtaining higher succinic acid yield and production rate, batch and fed-batch experiments were performed under controlled cultivation conditions. Batch experiments resulted in a succinic acid yield on glycerol of 0.95 g SA/g GLY and a production rate of 2.13 g/L.h, with residual production of acetic and formic acids. In fed-batch experiment, the SA production rate reached 2.31 g/L.h, the highest value reported in the literature for A. succinogenes using glycerol as carbon source. DMSO dramatically improved the conversion of glycerol by A. succinogenes and may be used as a co-substrate, opening new perspectives for the use of glycerol by this biocatalyst. Carob pods, highly available in Portugal as a residue from the locust bean gum industry, contain a significant amount of fermentable sugars such as sucrose, glucose and fructose and were also used as substrate for succinic acid production. Sugar extraction from raw and roasted carobs was optimized varying solid/water ratio and extraction time, maximizing sugar recovery while minimizing the extraction of polyphenols. Kinetic studies of glucose, fructose and sucrose consumption by A. succinogenes as individual carbon sources till 30 g/L were first determined to assess possible metabolic diferences. Results showed no significant diferences related to sugar consumption and SA production between the diferent sugars. Carob pods water extracts were then used as carbon source during controlled batch cultivations. (...)

Evaluation of a new serological test for the detection of anti-Coxiella and anti-Rickettsia antibodies.

Coxiella burnetii and members of the genus Rickettsia are obligate intracellular bacteria. Since cultivation of these organisms requires dedicated techniques, their diagnosis usually relies on serological or molecular biology methods. Immunofluorescence is considered the gold standard to detect antibody-reactivity towards these organisms. Here, we assessed the performance of a new automated epifluorescence immunoassay (InoDiag) to detect IgM and IgG against C. burnetii, Rickettsia typhi and Rickettsia conorii. Samples were tested with the InoDiag assay. A total of 213 sera were tested, of which 63 samples from Q fever, 20 from spotted fever rickettsiosis, 6 from murine typhus and 124 controls. InoDiag results were compared to micro-immunofluorescence. For acute Q fever, the sensitivity of phase 2 IgG was only of 30% with a cutoff of 1 arbitrary unit (AU). In patients with acute Q fever with positive IF IgM, sensitivity reached 83% with the same cutoff. Sensitivity for chronic Q fever was 100% whereas sensitivity for past Q fever was 65%. Sensitivity for spotted Mediterranean fever and murine typhus were 91% and 100%, respectively. Both assays exhibited a good specificity in control groups, ranging from 79% in sera from patients with unrelated diseases or EBV positivity to 100% in sera from healthy patients. In conclusion, the InoDiag assay exhibits an excellent performance for the diagnosis of chronic Q fever but a very low IgG sensitivity for acute Q fever likely due to low reactivity of phase 2 antigens present on the glass slide. This defect is partially compensated by the detection of IgM. Because it exhibits a good negative predictive value, the InoDiag assay is valuable to rule out a chronic Q fever. For the diagnosis of rickettsial diseases, the sensitivity of the InoDiag method is similar to conventional immunofluorescence.