Resveratrol, a polyphenolic compound found in grapes and wine, is an agonist for the estrogen receptor

The phytochemical resveratrol, which is found in grapes and wine, has been reported to have a variety of anti-inflammatory, anti-platelet, and anti-carcinogenic effects. Based on its structural similarity to diethylstilbestrol, a synthetic estrogen, we examined whether resveratrol might be a phytoestrogen. At concentrations (≈3–10 μM) comparable to those required for its other biological effects, resveratrol inhibited the binding of labeled estradiol to the estrogen receptor and it activated transcription of estrogen-responsive reporter genes transfected into human breast cancer cells. This transcriptional activation was estrogen receptor-dependent, required an estrogen response element in the reporter gene, and was inhibited by specific estrogen antagonists. In some cell types (e.g., MCF-7 cells), resveratrol functioned as a superagonist (i.e., produced a greater maximal transcriptional response than estradiol) whereas in others it produced activation equal to or less than that of estradiol. Resveratrol also increased the expression of native estrogen-regulated genes, and it stimulated the proliferation of estrogen-dependent T47D breast cancer cells. We conclude that resveratrol is a phytoestrogen and that it exhibits variable degrees of estrogen receptor agonism in different test systems. The estrogenic actions of resveratrol broaden the spectrum of its biological actions and may be relevant to the reported cardiovascular benefits of drinking wine.

Geometric constraints explain much of the species richness pattern in African birds

The world contains boundaries (e.g., continental edge for terrestrial taxa) that impose geometric constraints on the distribution of species ranges. Thus, contrary to traditional thinking, the expected species richness pattern in absence of ecological or physiographical factors is unlikely to be uniform. Species richness has been shown to peak in the middle of a bounded one-dimensional domain, even in the absence of ecological or physiographical factors. Because species ranges are not linear, an extension of the approach to two dimensions is necessary. Here we present a two-dimensional null model accounting for effects of geometric constraints. We use the model to examine the effects of continental edge on the distribution of terrestrial animals in Africa and compare the predictions with the observed pattern of species richness in birds endemic to the continent. Latitudinal, longitudinal, and two-dimensional patterns of species richness are predicted well from the modeled null effects alone. As expected, null effects are of high significance for wide ranging species only. Our results highlight the conceptual significance of an until recently neglected constraint from continental shape alone and support a more cautious analysis of species richness patterns at this scale.

Overexpression of a Homeobox Gene, LeT6, Reveals Indeterminate Features in the Tomato Compound Leaf1

The cultivated tomato (Lycopersicon esculentum) has a unipinnate compound leaf. In the developing leaf primordium, major leaflet initiation is basipetal, and lobe formation and early vascular differentiation are acropetal. We show that engineered alterations in the expression of a tomato homeobox gene, LeT6, can cause dramatic changes in leaf morphology. The morphological states are variable and unstable and the phenotypes produced indicate that the tomato leaf has an inherent level of indeterminacy. This is manifested by the production of multiple orders of compounding in the leaf, by numerous shoot, inflorescence, and floral meristems on leaves, and by the conversion of rachis-petiolule junctions into “axillary” positions where floral buds can arise. Overexpression of a heterologous homeobox transgene, kn1, does not produce such phenotypic variability. This indicates that LeT6 may differ from the heterologous kn1 gene in the effects manifested on overexpression, and that 35S-LeT6 plants may be subject to alterations in expression of both the introduced and endogenous LeT6 genes. The expression patterns of LeT6 argue in favor of a fundamental role for LeT6 in morphogenesis of leaves in tomato and also suggest that variability in homeobox gene expression may account for some of the diversity in leaf form seen in nature.

Origins of immunity: Relish, a compound Rel-like gene in the antibacterial defense of Drosophila.

NF-kappa B/Rel transcription factors are central regulators of mammalian immunity and are also implicated in the induction of cecropins and other antibacterial peptides in insects. We identified the gene for Relish, a compound Drosophila protein that, like mammalian p105 and p100, contains both a Rel homology domain and an I kappa B-like domain. Relish is strongly induced in infected flies, and it can activate transcription from the Cecropin A1 promoter. A Relish transcript is also detected in early embryos, suggesting that it acts in both immunity and embryogenesis. The presence of a compound Rel protein in Drosophila indicates that similar proteins were likely present in primordial immune systems and may serve unique signaling functions.

RXR gamma null mice are apparently normal and compound RXR alpha +/-/RXR beta -/-/RXR gamma -/- mutant mice are viable.

The RXR gamma (RXR, retinoid X receptor) gene was disrupted in the mouse. Homozygous mutant mice developed normally and were indistinguishable from their RXR gamma +/- or wild-type littermates with respect to growth, fertility, viability, and apparent behavior in the animal facility. Moreover, RXR alpha -/-/RXR gamma -/- and RXR beta -/-/RXR gamma -/- mutant phenotypes were indistinguishable from those of RXR alpha -/- and RXR beta -/- mutants, respectively. Strikingly, RXR alpha +/-/RXR beta -/-/RXR gamma -/- triple mutants were viable. Thus, it appears that RXR gamma does not exert any essential function that cannot be performed by RXR alpha or RXR beta, and one copy of RXR alpha is sufficient to perform most of the functions of the RXRs.

Sensitivity of a renal K+ channel (ROMK2) to the inhibitory sulfonylurea compound glibenclamide is enhanced by coexpression with the ATP-binding cassette transporter cystic fibrosis transmembrane regulator.

We demonstrate here that coexpression of ROMK2, an inwardly rectifying ATP-sensitive renal K+ channel (IKATP) with cystic fibrosis transmembrane regulator (CFTR) significantly enhances the sensitivity of ROMK2 to the sulfonylurea compound glibenclamide. When expressed alone, ROMK2 is relatively insensitive to glibenclamide. The interaction between ROMK2, CFTR, and glibenclamide is modulated by altering the phosphorylation state of either ROMK2, CFTR, or an associated protein, as exogenous MgATP and the catalytic subunit of protein kinase A significantly attenuate the inhibitory effect of glibenclamide on ROMK2. Thus CFTR, which has been demonstrated to interact with both Na+ and Cl- channels in airway epithelium, modulates the function of renal ROMK2 K+ channels.

Geometric incompatibility in a fault system.

Interdependence between geometry of a fault system, its kinematics, and seismicity is investigated. Quantitative measure is introduced for inconsistency between a fixed configuration of faults and the slip rates on each fault. This measure, named geometric incompatibility (G), depicts summarily the instability near the fault junctions: their divergence or convergence ("unlocking" or "locking up") and accumulation of stress and deformations. Accordingly, the changes in G are connected with dynamics of seismicity. Apart from geometric incompatibility, we consider deviation K from well-known Saint Venant condition of kinematic compatibility. This deviation depicts summarily unaccounted stress and strain accumulation in the region and/or internal inconsistencies in a reconstruction of block- and fault system (its geometry and movements). The estimates of G and K provide a useful tool for bringing together the data on different types of movement in a fault system. An analog of Stokes formula is found that allows determination of the total values of G and K in a region from the data on its boundary. The phenomenon of geometric incompatibility implies that nucleation of strong earthquakes is to large extent controlled by processes near fault junctions. The junctions that have been locked up may act as transient asperities, and unlocked junctions may act as transient weakest links. Tentative estimates of K and G are made for each end of the Big Bend of the San Andreas fault system in Southern California. Recent strong earthquakes Landers (1992, M = 7.3) and Northridge (1994, M = 6.7) both reduced K but had opposite impact on G: Landers unlocked the area, whereas Northridge locked it up again.

Evidence suggesting that the odortypes of pregnant women are a compound of maternal and fetal odortypes.

Odortypes--namely, body odors that distinguish one individual from another on the basis of genetic polymorphism at the major histocompatibility complex and other loci--are a fundamental element in the social life and reproductive behavior of the mouse, including familial imprinting, mate choice, and control of early pregnancy. Odortypes are strongly represented in urine. During mouse pregnancy, an outcrossed mother's urine acquires fetal major histocompatibility complex odortypes of paternal origin, an observation that we took as the focus of a search for odortypes in humans, using a fully automated computer-programmed olfactometer in which trained rats are known to distinguish precisely the odortypes of another species. Five women provided urine samples before and after birth, which in each case appropriately trained rats were found to distinguish in the olfactometer. Whether this olfactory distinction of mothers' urine before and after birth reflects in part the odortype and hence genotype of the fetus, and not just the state of pregnancy per se, was tested in a second study in which each mother's postpartum urine was mixed either with urine from her own infant or with urine of a different, same-aged infant. Responses of trained rats were more positive with respect to the former (congruous) mixtures than to the latter (incongruous) mixtures, implying that, as in the mouse, human fetal odortypes of paternal genomic origin are represented in the odortype of the mother, doubtless by circulatory transfer of the pertinent odorants.

Antichagásicos potenciais: síntese e modelagem molecular de híbridos de hidrazonas e liberadores de óxido nítrico

A doença de Chagas é uma parasitose extremamente negligenciada, cujo agente etiológico é o protozoário Trypanosoma cruzi. Atualmente, 21 países da América Latina são considerados regiões endêmicas, onde 75-90 milhões de pessoas estão expostas à infecção, 6-7 milhões estão infectadas e mais de 41 mil novos casos surgem por ano. Entretanto, apenas os fármacos nifurtimox e benznidazol estão disponíveis no mercado. Estes, além da baixa eficácia na fase crônica da parasitose, apresentam diversos efeitos adversos, sendo que no Brasil apenas o benznidazol é utilizado. Este fato mostra a importância de se ampliar o número de fármacos disponíveis e propor quimioterapia mais eficaz para o tratamento da doença de Chagas. Como forma de contribuir para essa busca, este trabalho objetiva a síntese de compostos híbridos bioisostéricos N-acilidrazônicos e sulfonilidrazônicos, contendo grupo liberador de óxido nítrico, com potencial de interação com cisteíno-proteases parasitárias, tais como a cruzaína. Nestes derivados, os grupos liberadores de óxido nítrico utilizados foram os grupos furoxano (contendo substituinte metílico e fenílico) e éster nitrato. Propôs-se a variação de anéis aromáticos substituídos e não-substituídos, com o intuito de avaliar a possível relação estrutura-atividade (REA) desses análogos. Até o momento, somente os compostos da série N-acilidrazônica tiveram avaliação biológica realizada. Os valores de IC50 dos compostos na forma amastigota do parasita variaram entre >100 a 2,88 µM, sendo este último valor comparável ao fármaco de referência. A atividade inibitória frente à cruzaína foi de 25,2 µM a 2,2 µM. Já a liberação de óxido nítrico foi avaliada pelo método indireto de detecção de nitrato e os valores variaram entre 52,0 µM e 4.232,0 µM. Estes são bem inferiores ao composto padrão, além de não se identificar correlação direta entre a atividade biológica e a liberação de NO. Na sequência, os dois compostos mais ativos (6 e 14) foram submetidos a estudos de permeabilidade e de citotoxicidade. O composto 6 foi considerado o de maior permeabilidade segundo o Sistema de Classificação Biofarmacêutica (SCB) e todos os compostos apresentaram a taxa de fluxo menor que 2, indicando a ausência de mecanismo de efluxo. Na avaliação do potencial citotóxico desses compostos em células humanas, o derivado 6 apresentou índice de seletividade superior ao do benznidazol. Em estudos de modelagem molecular usando análise exploratória de dados (HCA e PCA), propriedades estéricas/geométricas e eletrônicas foram consideradas as mais relevantes para a atividade biológica. Além disso, estudos de docking mostraram que a posição do grupo nitro no anel aromático é importante para a interação com a cruzaína. Ademais o composto 6 não provocou mudanças significativas no ciclo celular e na fragmentação de DNA em células humanas, mostrando-se como líder promissor para futuros estudos in vivo. Atividade tripanomicida, citotoxicidade, potencial de liberação de NO e estudos de permeabilidade dos 23 derivados sulfonilidrazônicos e ésteres nitrato estão sendo avaliados.

Geometric 3D point cloud compression

The use of 3D data in mobile robotics applications provides valuable information about the robot’s environment but usually the huge amount of 3D information is unmanageable by the robot storage and computing capabilities. A data compression is necessary to store and manage this information but preserving as much information as possible. In this paper, we propose a 3D lossy compression system based on plane extraction which represent the points of each scene plane as a Delaunay triangulation and a set of points/area information. The compression system can be customized to achieve different data compression or accuracy ratios. It also supports a color segmentation stage to preserve original scene color information and provides a realistic scene reconstruction. The design of the method provides a fast scene reconstruction useful for further visualization or processing tasks.

Technologies for Anatomical and Geometric Characterization of the Corneal Structure and Anterior Segment: A Review

Corneal and anterior segment imaging techniques have become a crucial tool in the clinical practice of ophthalmology, with a great variety of applications, such as corneal curvature and pachymetric analysis, detection of ectatic corneal conditions, anatomical study of the anterior segment prior to phakic intraocular lens implantation, or densitometric analysis of the crystalline lens. From the Placido-based systems that allow only a characterization of the geometry of the anterior corneal surface to the Scheimpflug photography-based systems that provide a characterization of the cornea, anterior chamber, and crystalline lens, there is a great variety of devices with the capability of analyzing different anatomical parameters with very high precision. To date, Scheimpflug photography-based systems are the devices providing the more complete analysis of the anterior segment in a non-invasive way. More developments are required in anterior segment imaging technologies in order to improve the analysis of the crystalline lens structure as well as the ocular structures behind the iris in a non-invasive way when the pupil is not dilated.

Visual perception for the 3D recognition of geometric pieces in robotic manipulation

During grasping and intelligent robotic manipulation tasks, the camera position relative to the scene changes dramatically because the robot is moving to adapt its path and correctly grasp objects. This is because the camera is mounted at the robot effector. For this reason, in this type of environment, a visual recognition system must be implemented to recognize and “automatically and autonomously” obtain the positions of objects in the scene. Furthermore, in industrial environments, all objects that are manipulated by robots are made of the same material and cannot be differentiated by features such as texture or color. In this work, first, a study and analysis of 3D recognition descriptors has been completed for application in these environments. Second, a visual recognition system designed from specific distributed client-server architecture has been proposed to be applied in the recognition process of industrial objects without these appearance features. Our system has been implemented to overcome problems of recognition when the objects can only be recognized by geometric shape and the simplicity of shapes could create ambiguity. Finally, some real tests are performed and illustrated to verify the satisfactory performance of the proposed system.