Label-free biosensing for dry eye by Means of BICELLS

The use of Biophotonic Sensing Cells (BICELLs) based on micro-nano pattemed photonic architectures has been recently proven as an efficient methodology for label-free biosensing by using Optical Interrogation [1]. According to this, we have studied the different optical response for a specific typology of BICELL, consisting of structures of SU -8. This material is biocompatible with different types of biomolecules and can be immobilized on its sensing surface. In particular, we have measured the optical response for a biomarker in clinic diagnostic of dry eye. Although different proteins can be enstudied such as: PRDX5, ANXA 1, ANXA 11, CST 4, PLAA Y S 1 OOA6 related with ocular surface (dry eye), for this work PLAA (phospholipase A2) is studied by means of label free biosensing based on BICELLs for analyzing the performance and specificity according with means values of concentration in ROC curves.

Quantum metropolitan optical network based on wavelength division multiplexing

Quantum Key Distribution (QKD) is maturing quickly. However, the current approaches to its application in optical networks make it an expensive technology. QKD networks deployed to date are designed as a collection of point-to-point, dedicated QKD links where non-neighboring nodes communicate using the trusted repeater paradigm. We propose a novel optical network model in which QKD systems share the communication infrastructure by wavelength multiplexing their quantum and classical signals. The routing is done using optical components within a metropolitan area which allows for a dynamically any-to-any communication scheme. Moreover, it resembles a commercial telecom network, takes advantage of existing infrastructure and utilizes commercial components, allowing for an easy, cost-effective and reliable deployment.

Entanglement distribution in optical networks

The ability to generate entangled photon pairs over a broad wavelength range opens the door to the simultaneous distribution of entanglement to multiple users in a network by using centralized sources and flexible wavelength-division multiplexing schemes. Here, we show the design of a metropolitan optical network consisting of tree-type access networks, whereby entangled photon pairs are distributed to any pair of users, independent of their location. The network is constructed employing commercial off-the-shelf components and uses the existing infrastructure, which allows for moderate deployment costs. We further develop a channel plan and a network-architecture design to provide a direct optical path between any pair of users; thus, allowing classical and one-way quantum communication, as well as entanglement distribution. This allows the simultaneous operation of multiple quantum information technologies. Finally, we present a more flexible backbone architecture that pushes away the load limitations of the original network design by extending its reach, number of users and capabilities.

Laser sounding from space; report of the ESA Technology Working Group on Space Laser Sounding and Ranging

The purpose and principles of spaceborne lidar are described, giving particular attention to candidates for space deployment, including simple backscatter lidar for measuring of cloud top height, cloud extend and optical properties, differential absorption lidar providing high vertical resolution measurements of humidity, temperature and pressure, a wind profiling lidar with the unique capability of improved weather forecasting and global dynamics, and a ranging and altimeter lidar for very accurate measurement of surface features, including ground, sea and ice cap height for solid earth studies.

High-brightness all semiconductor laser at 1.57 µm for space-borne lidar measurements of atmospheric carbon dioxide: device design and analysis of requirements

The availability of suitable laser sources is one of the main challenges in future space missions for accurate measurement of atmospheric CO2. The main objective of the European project BRITESPACE is to demonstrate the feasibility of an all-semiconductor laser source to be used as a space-borne laser transmitter in an Integrated Path Differential Absorption (IPDA) lidar system. We present here the proposed transmitter and system architectures, the initial device design and the results of the simulations performed in order to estimate the source requirements in terms of power, beam quality, and spectral properties to achieve the required measurement accuracy. The laser transmitter is based on two InGaAsP/InP monolithic Master Oscillator Power Amplifiers (MOPAs), providing the ON and OFF wavelengths close to the selected absorption line around 1.57 µm. Each MOPA consists of a frequency stabilized Distributed Feedback (DFB) master oscillator, a modulator section, and a tapered semiconductor amplifier optimized to maximize the optical output power. The design of the space-compliant laser module includes the beam forming optics and the thermoelectric coolers.The proposed system replaces the conventional pulsed source with a modulated continuous wave source using the Random Modulation-Continuous Wave (RM-CW) approach, allowing the designed semiconductor MOPA to be applicable in such applications. The system requirements for obtaining a CO2 retrieval accuracy of 1 ppmv and a spatial resolution of less than 10 meters have been defined. Envelope estimated of the returns indicate that the average power needed is of a few watts and that the main noise source is the ambient noise.

Pseudo-random single photon counting for space-borne atmospheric sensing applications

The ability to accurately observe the Earth's carbon cycles from space gives scientists an important tool to analyze climate change. Current space-borne Integrated-Path Differential Absorption (IPDA) Iidar concepts have the potential to meet this need. They are mainly based on the pulsed time-offlight principle, in which two high energy pulses of different wavelengths interrogate the atmosphere for its transmission properties and are backscattered by the ground. In this paper, feasibility study results of a Pseudo-Random Single Photon Counting (PRSPC) IPDA lidar are reported. The proposed approach replaces the high energy pulsed source (e.g. a solidstate laser), with a semiconductor laser in CW operation with a similar average power of a few Watts, benefiting from better efficiency and reliability. The auto-correlation property of Pseudo-Random Binary Sequence (PRBS) and temporal shifting of the codes can be utilized to transmit both wavelengths simultaneously, avoiding the beam misalignment problem experienced by pulsed techniques. The envelope signal to noise ratio has been analyzed, and various system parameters have been selected. By restricting the telescopes field-of-view, the dominant noise source of ambient light can be suppressed, and in addition with a low noise single photon counting detector, a retrieval precision of 1.5 ppm over 50 km along-track averaging could be attained. We also describe preliminary experimental results involving a negative feedback Indium Gallium Arsenide (InGaAs) single photon avalanche photodiode and a low power Distributed Feedback laser diode modulated with PRBS driven acoustic optical modulator. The results demonstrate that higher detector saturation count rates will be needed for use in future spacebourne missions but measurement linearity and precision should meet the stringent requirements set out by future Earthobserving missions.

Analysis of the performance of tapered semiconductor optical amplifiers: role of the taper angle

The beam properties of tapered semiconductor optical amplifiers emitting at 1.57 μm are analyzed by means of simulations with a self-consistent steady state electro-optical and thermal simulator. The results indicate that the self-focusing caused by carrier lensing is delayed to higher currents for devices with taper angle slightly higher than the free diffraction angle.

Development and fabrication of optical biosensors based on biophotonic sensing cells (BICELLs)

El objetivo de esta tesis es el desarrollo y caracterización de biosensores ópticos sin marcado basados en celdas sensoras biofotónicas (BICELLs). Éstas son un nuevo concepto de biosensor desarrollado por el grupo de investigación y consiste en la combinación de técnicas de interrogación vertical, junto a estructuras fotónicas producidas usando métodos de micro- y nanofabricación. Varias conclusiones son extraídas de este trabajo. La primera, que se ha definido una BICELL estándar basada en interferómetros Fabry-Perot (FP). Se ha demostrado su capacidad para la comparación de rendimiento entre BICELLs estructuradas y para la realización de inmunoensayos de bajo coste. Se han estudiado diferentes técnicas de fabricación disponibles para la producción de BICELLs. Se determinó que la litografía de contacto a nivel de oblea produce estructuras de bajo coste, reproducibles y de alta calidad. La resolución alcanzada ha sido de 700 nm. El estudio de la respuesta a inmunoensayos de las BICELLs producidas se ha desarrollado en este trabajo. Se estudió la influencia de BICELLs basadas en diferentes geometrías y tamaños. De aquí resulta un nuevo enfoque para predecir el comportamiento de respuesta para la detección biológica de cualquier biosensor óptico estructurado, relacionando su superficie efectiva y su sensibilidad óptica. También se demostró una técnica novedosa y de bajo coste para la caracterización experimental de la sensibilidad óptica, basada en el depósito de películas ultradelgadas. Finalmente, se ha demostrado el uso de BICELLs desarrolladas en esta tesis, en la detección de aplicaciones reales, tales como hormonas, virus y proteínas. ABSTRACT The objective of this thesis is the development and characterization of optical label-free biosensors based on Bio-Photonic sensing Cells (BICELLs). BICELL is a novel biosensor concept developed by the research group, and it consists of a combination of vertical interrogation optical techniques and photonic structures produced by using micro- and nano-fabrication methods. Several main conclusions are extracted from this work. Firstly, a standard BICELL is defined based on FP interferometers, which demonstrated its capacity for accomplishing performance comparisons among different structured BICELLs, as well as to achieve low-cost immunoassays. Different available fabrication techniques were studied for BICELL manufacturing. It is found that contact lithography at wafer scale produce cost-effective, reproducible and high quality structures. The resolution achieved was 700 nm. Study on the response of developed BICELLs to immunoassays is performed within this work. It is therefore studied the influence of BICELLs based on different geometries and sizes in the immunoassay, which resulted in a new approach to predict the biosensing behaviour of any structured optical biosensor relating to its effective surface and optical sensitivity. Also, it is demonstrated a novel and low-cost characterization technique of the experimental optical sensitivity, based on ultrathin-film deposition. Finally, it is also demonstrated the capability of using the developed BICELLs in this thesis for real applications detection of hormones, virus and proteins.

Random-modulation cw lidar system for space-borne carbon dioxide remote sensing based on a high-brightness semiconductor laser

In this paper, we report on the progresses of the BRITESPACE Consortium in order to achieve space-borne LIDAR measurements of atmospheric carbon dioxide concentration based on an all semiconductor laser source at 1.57 ?m. The complete design of the proposed RM-CW IPDA LIDAR has been presented and described in detail. Complete descriptions of the laser module and the FSU have been presented. Two bended MOPAs, emitting at the sounding frequency of the on- and off- IPDA channels, have been proposed as the transmitter optical sources with the required high brightness. Experimental results on the bended MOPAs have been presented showing a high spectral purity and promising expectations on the high output power requirements. Finally, the RM-CW approach has been modelled and an estimation of the expected SNR for the entire system is presented. Preliminary results indicate that a CO2 retrieval precision of 1.5 ppm could be achieved with an average output power of 2 W for each channel.

LogIn Design City

LogIn Design City is a project for the revitalization of public city?s space through the involvement of individuals, collectivities and municipalities, managed by a specific team and structured upon an augmented platform. The management system permits the organization of self-managed events and actions, offering support and assistance for the implementation of these actions in the offered spots of the city. Actions can be of cultural, commercial, educational or leisure-oriented nature and depending on their purpose the spots can be offered free of charge or with fees, creating a possibility for remuneration and providing a tool for development in underprivileged zones of the city. An important aspect is the emphasis on the digital outlook of the city, which is structured as an interface that allows communication with the management system and information upon actual, past and upcoming events.

Contribution to the improvement of communication services in nanosatellite constellations using delay and disruption tolerant networking based architectures

Esta tesis se desarrolla dentro del marco de las comunicaciones satelitales en el innovador campo de los pequeños satélites también llamados nanosatélites o cubesats, llamados así por su forma cubica. Estos nanosatélites se caracterizan por su bajo costo debido a que usan componentes comerciales llamados COTS (commercial off-the-shelf) y su pequeño tamaño como los Cubesats 1U (10cm*10 cm*10 cm) con masa aproximada a 1 kg. Este trabajo de tesis tiene como base una iniciativa propuesta por el autor de la tesis para poner en órbita el primer satélite peruano en mi país llamado chasqui I, actualmente puesto en órbita desde la Estación Espacial Internacional. La experiencia de este trabajo de investigación me llevo a proponer una constelación de pequeños satélites llamada Waposat para dar servicio de monitoreo de sensores de calidad de agua a nivel global, escenario que es usado en esta tesis. Es ente entorno y dadas las características limitadas de los pequeños satélites, tanto en potencia como en velocidad de datos, es que propongo investigar una nueva arquitectura de comunicaciones que permita resolver en forma óptima la problemática planteada por los nanosatélites en órbita LEO debido a su carácter disruptivo en sus comunicaciones poniendo énfasis en las capas de enlace y aplicación. Esta tesis presenta y evalúa una nueva arquitectura de comunicaciones para proveer servicio a una red de sensores terrestres usando una solución basada en DTN (Delay/Disruption Tolerant Networking) para comunicaciones espaciales. Adicionalmente, propongo un nuevo protocolo de acceso múltiple que usa una extensión del protocolo ALOHA no ranurado, el cual toma en cuenta la prioridad del trafico del Gateway (ALOHAGP) con un mecanismo de contienda adaptativo. Utiliza la realimentación del satélite para implementar el control de la congestión y adapta dinámicamente el rendimiento efectivo del canal de una manera óptima. Asumimos un modelo de población de sensores finito y una condición de tráfico saturado en el que cada sensor tiene siempre tramas que transmitir. El desempeño de la red se evaluó en términos de rendimiento efectivo, retardo y la equidad del sistema. Además, se ha definido una capa de convergencia DTN (ALOHAGP-CL) como un subconjunto del estándar TCP-CL (Transmission Control Protocol-Convergency Layer). Esta tesis muestra que ALOHAGP/CL soporta adecuadamente el escenario DTN propuesto, sobre todo cuando se utiliza la fragmentación reactiva. Finalmente, esta tesis investiga una transferencia óptima de mensajes DTN (Bundles) utilizando estrategias de fragmentación proactivas para dar servicio a una red de sensores terrestres utilizando un enlace de comunicaciones satelitales que utiliza el mecanismo de acceso múltiple con prioridad en el tráfico de enlace descendente (ALOHAGP). El rendimiento efectivo ha sido optimizado mediante la adaptación de los parámetros del protocolo como una función del número actual de los sensores activos recibidos desde el satélite. También, actualmente no existe un método para advertir o negociar el tamaño máximo de un “bundle” que puede ser aceptado por un agente DTN “bundle” en las comunicaciones por satélite tanto para el almacenamiento y la entrega, por lo que los “bundles” que son demasiado grandes son eliminados o demasiado pequeños son ineficientes. He caracterizado este tipo de escenario obteniendo una distribución de probabilidad de la llegada de tramas al nanosatélite así como una distribución de probabilidad del tiempo de visibilidad del nanosatélite, los cuales proveen una fragmentación proactiva óptima de los DTN “bundles”. He encontrado que el rendimiento efectivo (goodput) de la fragmentación proactiva alcanza un valor ligeramente inferior al de la fragmentación reactiva. Esta contribución permite utilizar la fragmentación activa de forma óptima con todas sus ventajas tales como permitir implantar el modelo de seguridad de DTN y la simplicidad al implementarlo en equipos con muchas limitaciones de CPU y memoria. La implementación de estas contribuciones se han contemplado inicialmente como parte de la carga útil del nanosatélite QBito, que forma parte de la constelación de 50 nanosatélites que se está llevando a cabo dentro del proyecto QB50. ABSTRACT This thesis is developed within the framework of satellite communications in the innovative field of small satellites also known as nanosatellites (<10 kg) or CubeSats, so called from their cubic form. These nanosatellites are characterized by their low cost because they use commercial components called COTS (commercial off-the-shelf), and their small size and mass, such as 1U Cubesats (10cm * 10cm * 10cm) with approximately 1 kg mass. This thesis is based on a proposal made by the author of the thesis to put into orbit the first Peruvian satellite in his country called Chasqui I, which was successfully launched into orbit from the International Space Station in 2014. The experience of this research work led me to propose a constellation of small satellites named Waposat to provide water quality monitoring sensors worldwide, scenario that is used in this thesis. In this scenario and given the limited features of nanosatellites, both power and data rate, I propose to investigate a new communications architecture that allows solving in an optimal manner the problems of nanosatellites in orbit LEO due to the disruptive nature of their communications by putting emphasis on the link and application layers. This thesis presents and evaluates a new communications architecture to provide services to terrestrial sensor networks using a space Delay/Disruption Tolerant Networking (DTN) based solution. In addition, I propose a new multiple access mechanism protocol based on extended unslotted ALOHA that takes into account the priority of gateway traffic, which we call ALOHA multiple access with gateway priority (ALOHAGP) with an adaptive contention mechanism. It uses satellite feedback to implement the congestion control, and to dynamically adapt the channel effective throughput in an optimal way. We assume a finite sensor population model and a saturated traffic condition where every sensor always has frames to transmit. The performance was evaluated in terms of effective throughput, delay and system fairness. In addition, a DTN convergence layer (ALOHAGP-CL) has been defined as a subset of the standard TCP-CL (Transmission Control Protocol-Convergence Layer). This thesis reveals that ALOHAGP/CL adequately supports the proposed DTN scenario, mainly when reactive fragmentation is used. Finally, this thesis investigates an optimal DTN message (bundles) transfer using proactive fragmentation strategies to give service to a ground sensor network using a nanosatellite communications link which uses a multi-access mechanism with priority in downlink traffic (ALOHAGP). The effective throughput has been optimized by adapting the protocol parameters as a function of the current number of active sensors received from satellite. Also, there is currently no method for advertising or negotiating the maximum size of a bundle which can be accepted by a bundle agent in satellite communications for storage and delivery, so that bundles which are too large can be dropped or which are too small are inefficient. We have characterized this kind of scenario obtaining a probability distribution for frame arrivals to nanosatellite and visibility time distribution that provide an optimal proactive fragmentation of DTN bundles. We have found that the proactive effective throughput (goodput) reaches a value slightly lower than reactive fragmentation approach. This contribution allows to use the proactive fragmentation optimally with all its advantages such as the incorporation of the security model of DTN and simplicity in protocol implementation for computers with many CPU and memory limitations. The implementation of these contributions was initially contemplated as part of the payload of the nanosatellite QBito, which is part of the constellation of 50 nanosatellites envisaged under the QB50 project.

Osiris— The optical, spectroscopic and infrared remote imaging system for the Rosetta orbiter

The scientific objectives, design, and implementation of the Optical, Spectroscopic, and Infrared Remote Imaging System (OSIRIS) for the International Rosetta Mission are described. The instrument comprises two camera systems with a common electronics box. A narrow angle camera will provide high resolution images of the structure and morphology of the nucleus of a comet. A wide angle camera with high straylight rejection and dynamic range will be used to investigate the innermost coma and the emission process at the surface of the comet. An infrared imaging system, which dramatically enhances the scientific return has been included in the narrow angle camera at little extra cost.

Luz industrial e imagen tecnificada: de Moholy Nagy al C.A.V.S. (Center for Advanced Visual Studies)

El desarrollo de la tecnología de la luz implicará la transformación de la vida social, cultural y económica. Tanto las consideraciones espaciales del Movimiento Moderno, como los efectos producidos por la segunda Guerra Mundial, tendrán efectos visibles en las nuevas configuraciones espaciales y en la relación simbiótica y recíproca que se dará entre ideología y tecnología. La transformación en la comprensión de la articulación espacial, asociada al desarrollo tecnológico, afectará al modo en que este espacio es experimentado y percibido. El espacio expositivo y el espacio escénico se convertirán en laboratorio práctico donde desarrollar y hacer comprensible todo el potencial ilusorio de la luz, la proyección y la imagen, como parámetros modificadores y dinamizadores del espacio arquitectónico. Esta experimentación espacial estará precedida por la investigación y creación conceptual en el mundo plástico, donde los nuevos medios mecánicos serán responsables de la construcción de una nueva mirada moderna mediatizada por los elementos técnicos. La experimentación óptica, a través de la fotografía, el cine, o el movimiento de la luz y su percepción, vinculada a nuevos modos de representación y comunicación, se convertirá en elemento fundamental en la configuración espacial. Este ámbito de experimentación se hará patente en la Escuela de la Bauhaus, de la mano de Gropius, Schlemmer o Moholy Nagy entre otros; tanto en reflexiones teóricas como en el desarrollo de proyectos expositivos, arquitectónicos o teatrales, que evolucionarán en base a la tecnología y la modificación de la relación con el espectador. El espacio expositivo y el espacio escénico se tomarán como oportunidad de investigación espacial y de análisis de los modos de percepción, convirtiéndose en lugares de experimentación básicos para el aprendizaje. El teatro se postula como punto de encuentro entre el arte y la técnica, cobrando especial importancia la intersección con otras disciplinas en la definición espacial. Las múltiples innovaciones técnicas ligadas a los nuevos fundamentos teatrales en la modificación de la relación con la escena, que se producen a principios del siglo XX, tendrán como consecuencia la transformación del espacio en un espacio dinámico, tanto física como perceptivamente, que dará lugar a nuevas concepciones espaciales, muchas de ellas utópicas. La luz, la proyección y la creación de ilusión en base a estímulos visuales y sonoros, aparecen como elementos proyectuales efímeros e inmateriales, que tendrán una gran incidencia en el espacio y su modo de ser experimentado. La implicación de la tecnología en el arte conllevará modificaciones en la visualización, así como en la configuración espacial de los espacios destinados a esta. Destacaremos como propuesta el Teatro Total de Walter Gropius, en cuyo desarrollo se recogen de algún modo las experiencias espaciales y las investigaciones desarrolladas sobre la estructura formal de la percepción realizadas por Moholy Nagy, además de los conceptos acerca del espacio escénico desarrollados en el taller de Teatro de la Bauhaus por Oskar Schlemmer. En el Teatro Total, Gropius incorporará su propia visión de cuestiones que pertenecen a la tradición de la arquitectura teatral y las innovaciones conceptuales que estaban teniendo lugar desde finales del s.XIX, tales como la participación activa del público o la superación entre escena y auditorio, estableciendo en el proyecto una nueva relación perceptual entre sala, espectáculo y espectador; aumentando la sensación de inmersión, a través del uso de la física, la óptica, y la acústica, creando una energía concéntrica capaz de extenderse en todas direcciones. El Teatro Total será uno de los primeros ejemplos en los que desde el punto de partida del proyecto, se conjuga la imagen como elemento comunicativo con la configuración espacial. Las nuevas configuraciones escénicas tendrán como premisa de desarrollo la capacidad de transformación tanto perceptiva, como física. En la segunda mitad del s.XX, la creación de centros de investigación como el CAVS (The Center for Advanced Visual Studies,1967), o el EAT (Experiments in Art and Technology, 1966), favorecerán la colaboración interdisciplinar entre arte y ciencia, implicando a empresas de carácter tecnológico, como Siemens, HP, IBM o Philips, facilitando soporte técnico y económico para el desarrollo de nuevos sistemas. Esta colaboración interdisciplinar dará lugar a una serie de intervenciones espaciales que tendrán su mayor visibilidad en algunas Exposiciones Universales. El resultado será, en la mayoría de los casos, la creación de espacios de carácter inmersivo, donde se establecerá una relación simbiótica entre espacio, imagen, sonido, y espectador. La colocación del espectador en el centro de la escena y la disposición dinámica de imagen y sonido, crearán una particular narrativa espacial no lineal, concebida para la experiencia. Desde las primeras proyecciones de cine a la pantalla múltiple de los Eames, las técnicas espaciales de difusión del sonido en Stockhausen, o los experimentos con el movimiento físico interactivo, la imagen, la luz en movimiento y el sonido, quedan inevitablemente convertidos en material arquitectónico. ABSTRACT. Light technology development would lead to a social, cultural and economic transformation. Both spatial consideration of “Modern Movement” and Second World War effects on technology, would have a visible aftereffect on spatial configuration and on the symbiotic and mutual relationship between ideology & technology. Comprehension adjustment on the articulation of space together with technology development, would impact on how space is perceived and felt. Exhibition space and scenic space would turn into a laboratory where developing and making comprehensive all illusory potential of light, projection and image. These new parameters would modify and revitalize the architectonic space. as modifying and revitalizing parameters of architectonic space. Spatial experimentation would be preceded by conceptual creation and investigation on the sculptural field, where new mechanic media would be responsible for a fresh and modern look influenced by technical elements. Optical experimentation, through photography, cinema or light movement and its perception, would turn into essential components for spatial arrangement linked to new ways of performance and communication. This experimentation sphere would be clear at The Bauhaus School, by the hand of Gropius, Schlemmer or Moholy Nag among others; in theoretical, theatrical or architectural performance’s projects, that would evolve based on technology and also based on the transformation of the relationship with the observer. Exhibition and perfor-mance areas would be taken as opportunities of spatial investigation and for the analysis of the different ways of perception, thus becoming key places for learning. Theater is postulated as a meeting point between art and technique, taking on a new significance at its intersection with other disciplines working with spatial definition too. The multiple innovation techniques linked to the new foundations for the theater regarding stage relation, would have as a consequence the regeneration of the space. Space would turn dynamic, both physically and perceptibly, bringing innovative spatial conceptions, many of them unrealistic. Light, projection and illusory creation based on sound and visual stimulus would appear as intangible and momentary design components, which would have a great impact on the space and on the way it is experienced. Implication of technology in art would bring changes on the observer as well as on the spatial configuration of the art spaces2. It would stand out as a proposal Walter Groupis Total Theater, whose development would include somehow the spatial experiments and studies about formal structure of perception accomplished by Moholy Nagy besides the concepts regarding stage space enhanced at the Bauhaus Theater Studio by Oskar Schlemmer. Within Total Theater, Groupis would incorporate his own view about traditional theatric architecture and conceptual innovations that were taking place since the end of the nineteenth century, such as active audience participation or the diffusing limits between scene and audience, establishing a new perception relationship between auditorium, performance and audience, improving the feeling of immersion through the use of physics, optics and acoustics, creating a concentric energy capable of spreading in all directions. Total Theater would be one of the first example in which, from the beginning of the Project, image is combined as a communicating element with the spatial configuration. As a premise of development, new stage arrangement would have the capacity of transformation, both perceptive and physically. During the second half or the twentieth century, the creation of investigation centers such as CAVS (Center for Advanced Visual Studies, 1967) or EAT (Experiments in Art and Technology, 1966), would help to the interdisciplinary collaboration between art and science, involving technology companies like Siemens, HP, IBM or Philips, providing technical and economic support to the development of new systems. This interdisciplinary collaboration would give room to a series of spatial interventions which would have visibility in some Universal Exhibitions. The result would be, in most cases, the creation of immersive character spaces, where a symbiotic relationship would be stablished between space, image, sound and audience. The new location of the audience in the middle of the display, together with the dynamic arrangement of sound and image would create a particular, no lineal narrative conceived to be experienced. Since the first cinema projections, the multiple screen of Eames, the spatial techniques for sound dissemination at Stockhausen or the interactive physical movement experimentation, image, motion light and sound would turn inevitably into architectural material.

AS INOVAÇÕES TECNOLÓGICAS E OS INTERMEDIÁRIOS DA PRODUÇÃO E DO ACESSO À INFORMAÇÃO JORNALÍSTICA

O jornalismo é um dos principais meios de oferta de temas para a discussão e formação da opinião pública, porém depende de um sistema técnico para ser transmitido. Durante mais de cem anos as informações produzidas pela imprensa foram emitidas, armazenadas, transmitidas e recebidas pelos chamados veículos de comunicação de massa que utilizam a rede centralizada cujas características estão na escassez material, produção em série e massificação. Esse sistema separa no tempo e no espaço emissores e receptores criando uma relação desigual de força em que as grandes empresas controlaram o fluxo informativo, definindo quais fatos seriam veiculados como notícia. Em 1995, a internet cuja informação circula sob a tecnologia da rede distribuída, foi apropriada pela sociedade, alterando a forma de produção, armazenamento e transmissão de informação. A tecnologia despertou a esperança de que esta ferramenta poderia proporcionar uma comunicação mais dialógica e democrática. Mas aos poucos pode-se perceber novas empresas se apropriando da tecnologia da rede distribuída sob a qual circula a internet, gerando um novo controle do fluxo informativo. Realizou-se nessa pesquisa um levantamento bibliográfico para estabelecer uma reflexão crítica dos diferentes intermediários entre fato e a notícia tanto da rede centralizada como na rede distribuída, objetivando despertar uma discussão que possa oferecer novas ideias para políticas, bem como alternativas para uma comunicação mais democrática e mais libertária.

Optical images of visible and invisible percepts in the primary visual cortex of primates

We optically imaged a visual masking illusion in primary visual cortex (area V-1) of rhesus monkeys to ask whether activity in the early visual system more closely reflects the physical stimulus or the generated percept. Visual illusions can be a powerful way to address this question because they have the benefit of dissociating the stimulus from perception. We used an illusion in which a flickering target (a bar oriented in visual space) is rendered invisible by two counter-phase flickering bars, called masks, which flank and abut the target. The target and masks, when shown separately, each generated correlated activity on the surface of the cortex. During the illusory condition, however, optical signals generated in the cortex by the target disappeared although the image of the masks persisted. The optical image thus was correlated with perception but not with the physical stimulus.