818 resultados para Fiber Optic Sensors in Quality evaluation
Resumo:
A novel scheme is proposed to transform a Gaussian pulse to a millimeter-wave frequency modulation pulse by using an apodized Moire fiber Bragg grating in radio-over-fiber system. The relation between the input and output pulses is analyzed theoretically by Fourier transformation method and the requirements for the proposed fiber grating are presented. An apodized Moire fiber Bragg grating is designed and its characteristics are studied. It is shown that the proposed device is feasible, and the new scheme is believed to be an effective solution for the generation of millimeter-wave sub-carrier in future radio-over-fiber systems. (c) 2006 Elsevier B.V. All rights reserved.
Resumo:
The electro-optic effect in uniaxial crystals for light propagating near the optic axis with any polarization has been analyzed. The passive and the electrically induced birefringences and the rotation of polarization direction in crystals have been calculated, and the conoscopic interference figures under orthogonal polariscopes for different polarizer directions have been plotted. The extinction areas caused by the rotation of polarization direction in crystals change with the polarizer direction, but the two heads of the induced optical axes do not vary, which are always on the induced principal axis with bigger refractive index. The directions of polariscopes are always extinction, and the +/- 45 degrees directions with polarizer are always complete transmission. The conoscopic interference figures for LiNbO3 crystals have been demonstrated experimentally by rotating polariscopes directions, which accord with the theoretically calculating plots. (c) 2006 Elsevier GmbH. All rights reserved.
Resumo:
This document is intended for use by scientists and other citizens concerned with the ecological condition of estuaries, as well as by managers and lawmakers interested in the sustained use of estuaries for commercial and recreational purposes. It also addresses public concerns about the aesthetic quality of coastal areas vital to tourism and recreation. By producing this report on the ecological condition of estuaries in the Gulf of Mexico, we have taken one step in assessing the health of this environmental resource. We have produced an environmental report card to be used as a guide in the evaluation of management decisions and research directions. This report is organized in three parts: (1) an introduction that gives background information on the Gulf of Mexico, estuarine ecology, and the factors that impact estuaries in the gulf, (2) the main section on priority ecological indicators used to measure the condition of estuaries in the gulf and (3) an ecological report card that summarizes the data on ecological indicators and provides a rating of the condition of estuaries in each gulf state and for gulf estuaries overall. Many of the ratings were based on the percent area of estuaries in each state exhibiting degraded or adverse levels of an indicator.
Resumo:
This paper reviews the development of system techniques using advanced modulation formats that have arisen in recent years for use in datacommunications. Simulations are provided to allow comparison of the emerging schemes. © 2011 Optical Society of America.
Resumo:
A survey of the quality of salt cured fish in Kanyakumari District, Madras State was done during the years 1963 and 1964 to obtain necessary basic information to formulate quality standards for these products which are gaining importance in the export trade. 155 trade samples of sun-dried, dry-salted, wet-cured and pit-cured fishery products were examined for their chemical quality and organoleptic characteristics. 26.5% of the sun-dried products, 25% of the wet cured fish, 55.21% of the dried salted products and none of the pit cured samples were found to be good in quality. The sun dried products were generally found to have heavy admixture of sand and were inadequately dried. The chief defects in the salt cured fish products were found to be the use of spoiled fish, imperfect cleaning and washing, use of impure salt, inadequate salting, curing and drying, and unhygienic conditions in all stages. Quality standards must be formulated for each variety of salt cured fish product and adequate measures taken to rectify the defects and enforce the quality standards.
Resumo:
In commerce, great importance is given to the color of the dry prawn pulp in its quality evaluation. The possible correlation between this color factor to the iced or not iced condition of the raw prawn used, is investigated. The study reveals that as the icing period of the raw material increases the color of the finished product proportionately intensifies to a bright red compared to light brownish yellow or orange color of the product from the not iced prawn, and at the same time the other characteristics like flavor and taste deteriorates as the time of icing advances. This finding tends to show that the color factor does not reflect the true quality of prawn pulp. Based on chemical data it is suggested that "browning" due to Maillard reaction may have an important role in this color phenomena.
Resumo:
Effect of delayed icing on the quality of Penaeus monodon iced after three hours of harvest was studied in plastic and bamboo baskets. After harvest of three hours at ambient temperature (28°-32°C), ice was added to the shrimp at a ratio of 1:1 (shrimp:ice) and stored for 21 hours in both the baskets. Quality evaluation was carried out through visual assessment, biochemical analysis and microbial analysis for 24 hours. The organoleptic evaluation and scoring was done from the time of harvest treated as 0 hour and the average score was 10. At 9th hour after iced condition quality of shrimp was found reduced to the next stage (acceptable) with a score ranged from 8.4-6.5 in both baskets. This acceptable stage was observed throughout the experiment for bamboo basket whereas in the plastic basket the quality was reduced to a small extent with a score of 6.4 (moderately acceptable). Till the end point of the experiment the quality of shrimp was acceptable in respect to biochemical analysis. The microbial load was found log sub(10) 3.99±0.12 cfu/g to log sub(10) 4.33±0.21 cfu/g and log sub(10) 4.01 ±0.12 cfu/g to log sub(10) 4.83±0.19 cfu/g in the bamboo and plastic basket respectively. The importers or buyers suggests for immediate icing to maintain good quality but results of the present experiment suggest that the quality does not vary drastically for first three hours.
Resumo:
The Spatial Light Modulator in a mode demultiplexer is used to measure the aberrations of the system in which it is installed before applying aberration correction to improve the insertion loss and modal extinction ratios. © 2013 OSA.
Resumo:
A technique using spectrum-shaping codes to create nulls in the baseband spectrum of an Ethernet signal, so that several RF signals can be inserted in-band, is demonstrated by simultaneous transmission of 10GbE and WCDMA signals. © 2013 OSA.
Resumo:
The origin of the transient crosstalk (TC) in a phase-only LCOS based WSS using a Fourier transform setup was investigated and identified. Two methods were proposed to reduce the TC by at least 5dB without the need to modify the optics or electronics in use. © 2013 OSA.
Resumo:
The Spatial Light Modulator in a mode demultiplexer is used to measure the aberrations of the system in which it is installed before applying aberration correction to improve the insertion loss and modal extinction ratios. © 2013 OSA.
Resumo:
A detailed study on analyzing the crosstalk in a wavelength division multiplexed fiber laser sensor array system based on a digital phase generated carrier interferometric interrogation scheme is reported. The crosstalk effects induced by the limited optical channel isolation of a dense wavelength division demultiplexer (DWDM) are presented, and the necessary channel isolation to keep the crosstalk negligible to the output signal was calculated via Bessel function expansion and demonstrated by a two serial fiber laser sensors system. Finally, a three-element fiber laser sensor array system with a 50-dB channel-isolation DWDM was built up. Experimental results demonstrated that there was no measurable crosstalk between the output channels.
Resumo:
A scheme for hi-fi all-optical continuously tunable delay is proposed. The signal wavelength is converted to a desired idler wavelength and converted back after being delayed by a high linear-chirp-rate (HLCR) fiber Bragg grating (FBG) based on four-wave mixing (FWM) in a highly-nonlinear photonic crystal fiber (HN-PCF). In our experiment, 400 ps (more than 8 full width of half maximum, FWHM) tunable delay is achieved for a 10 GHz clock pulse with relative pulse width broaden ratio (RPWBR) of 2.08%. The power penalty is only 0.3 dB at 10(-9) BER for a 10 Gb/s 2(31)-1 pseudo random bit sequence (PRBS) data. (c) 2009 Elsevier B.V. All rights reserved.
Resumo:
Qinghai-Tibet Railway is the longest and highest plateau railway in the world. A long term monitoring system of the stability of the subgrade in the permafrost regions should be put forward immediately to prevent damage to the railway. As it's very difficult to set up the long-distance automatic monitoring system which contains a lot of measure points along the 550 kilometers railway in the permafrost area, we present a subgrade temperature monitor system based on fiber Bragg grating (FBG). In this paper the principles of the FBG was presented, and the feasibility of the FBG sensors in the permafrost area of Qinghai-Tibet plateau was analysized. We embedded fifteen FBG temperature sensors and thermal resistance temperature sensors. A contrast experiment is made while the two kinds of sensors are arranged in the same position. The result of the experiment shows that the accuracy of the FBG temperature sensors is less than 0.1 degrees C. and the FBG sensors can do well in the measurement of pattern which the temperature varies with the depth of the permafrost soil. The result also shows the stability of the FBG sensors in the bad environmental condition of Qinghai-Tibet plateau, which proves the feasibility of the application of FBG sensors and our monitoring system on the Qinghai-Tibet railway.