Effect of phase-transformation on mechanical-behavior of dual-phase steel plate

The mechanical behavior of dual phase steel plates is affected by internal stresses created during martensite transformation. Analytical modelling of this effect is made by considering a unit cell made of martensite inclusion in a ferrite matrix. A large strain finite element analysis is then performed to obtain the plane stress deformation state. Displayed numerically are the development of the plastic zone and distribution of local state of stress and strain. Studied also are the shape configuration of the martensite (hard-phase) that influences the interfacial condition as related to stress transmission and damage. Internal stresses are found to enhance the global flow stress after yield initiation in the ferrite matrix. Good agreement is obtained between the analytical results and experimental observations.

Inhomogeneous behavior of antiplane shear crack in softening material with local unloading

Examined in this work is the anti-plane stress and strain near a crack in a material that softens beyond the elastic peak and unloads on a linear path through the initial state. The discontinuity in the constitutive relation is carried into the analysis such that one portion of the local solution is elliptic in character and the other hyperbolic. Material elements in one region may cross over to another as the loading is increased. Local unloading can thus prevail. Presented are the inhomogeneous character of the asymptotic stress and strain in the elliptic and hyperbolic region, in addition to the region in which the material elements had experienced unloading. No one single stress or strain coefficient would be adequate for describing crack instability.

Fracture behavior of axisymmetrical bars under high triaxial stress and large strain cyclic loading

Axisymmetric notched bars with notch roots of large and small radii were tested under large strain cyclic loading. The main attention is focused on the fracture behaviour of steels having cycles to failure within the range 1-100. Our study shows that a gradual transition from a static ductile nature to one of fatigue cleavage can be observed and characterized by the Coffin-Manson formula in a generalized form. Both the triaxial tensile stress within the central region of specimens and static damage caused by the first increasing load have effects on the final failure event. A generalized cyclic strain range parameter DELTAepsilon is proposed as a measure of the numerous factors affecting behaviour. Fractographs are presented to illustrate the behaviour reported in the paper.

Crack tip behavior and crack-propagation in ductile materials

Dilatational plastic equations, which can include the effects of ductile damage, are derived based on the equivalency in expressions for dissipated plastic work. Void damage developed internally at the large-strain stage is represented by an effective continuum being strain-softened and plastically dilated. Accumulation of this local damage leads to progressive failure in materials. With regard to this microstructural background, the constitutive parameters included for characterizing material behaviour have the sense of internal variables. They are not able to be determined explicitly by macroscopic testing but rather through computer simulation of experimental curves and data. Application of this constitutive model to mode-I cracking examples demonstrates that a huge strain concentration accompanied by a substantial drop of stress does occur near the crack tip. Eventually, crack propagation is simulated by using finite elements in computations. Two numerical examples show good accordance with experimental data. The whole procedure of study serves as a justification of the constitutive formulation proposed in the text.

Creep behavior of woven roving grp beam in three-point bending

The creep and relaxation behaviour of laminated glass fibre reinforced plastics (GRP) in three-point bending were studied both experimentally and analytically. Creep and relaxation experiments were carried out on eight types of specimens, consisting of glass fibre fabric reinforced epoxy beams. While the bending deflexion and creep strains were measured in the creep tests, the load and relaxation strain were recorded in the relaxation tests. Marked creep effects were seen in the tests, where the environment temperature was 50°C and the period of the measurement was 60 min. An attempt to predict the creep deflexion and relaxation behaviour was made. The transverse shear effect on creep deflexion was taken into account. The predicted results were compared with experimental ones. They were found to be in reasonable agreement, but the linearization assumption, upon which the relaxation behaviour analysis was based, appears to lead to larger inaccuracies in the results.

On the behavior of gravity-waves on porous slopes

displacement thickness is lower than in the pure-gas case alone. The results indicate

Experimental relaxation behavior of chopped-strand mat glass-fiber reinforced polyester beams in 3 point bending

A dimensionless relation of the form for collating fatigue crack starting growth data is proposed in which Δkth represents the stress intensity factor range at the threshold. Based on experimental results, this relation attains the value of 0.6 for a fatigue crack to start growth in the Austenitic stainless steel investigated in this work. Metallurgical examinations were also carried out to show a transgranular shear mode of cyclic cleavage and plastic shear.

Static and fatigue failure behavior of carbon-fiber reinforced epoxy composite-materials with edge notch

A study of carbon fiber reinforced epoxy composite material with 0° ply or ±45°ply(unnotched or with edge notch) was carried out under static tensile and tension-tensioncyclic loading testing. Static and fatigue behaviour and damage failure modes in unnotched/notched specimens plied in different manners were analysed and compared with each other.A variety of techniques (acoustic emission, two types of strain extensometer, high speed pho-tography, optical microscopy, scanning electron microscope, etc.) were used to examine thedamage of the laminates. Experimental results show that when these carbon/epoxy laminateswith edge notch normal to the direction of the load are axially loaded in static or fatiguetension, the crack does not propagate along the length of notch but is in the interface (fiberdirection). The notch has no substantial effect on the stresses at the unnotched portion. Thedamage failure mechanism is discussed.

The Impact of Regulation on Pricing Behavior in the Spanish Electricity Market

In this paper we measure the impact of regulatory measures which affected the Spanish electricity wholesale market in the period 2002-2005. Our approach is based on the fact that regulation changes firms' incentives and therefore their market behavior. In the absence of any regulation firms would choose profit- maximizing prices on their residual demands so that the observed gap between optimal and actual prices provides a measure of the effect of regulation. Our results indicate that regulation has decreased wholesale prices considerably, but became less effective at the end of the sample period which explains the change of regulatory regime introduced in 2006.

Strategic Behavior and Collusion: An Application to the Spanish Electricity Market

The paper has two major contributions to the theory of repeated games. First, we build a supergame oligopoly model where firms compete in supply functions, we show how collusion sustainability is affected by the presence of a convex cost function, the magnitude of both the slope of demand market, and the number of rivals. Then, we compare the results with those of the traditional Cournot reversion under the same structural characteristics. We find how depending on the number of firms and the slope of the linear demand, collusion sustainability is easier under supply function than under Cournot competition. The conclusions of the models are simulated with data from the Spanish wholesale electricity market to predict lower bounds of the discount factors.

Serviço de intercâmbio de material bibliográfico da Biblioteca da Câmara dos Deputados : uma proposta de melhoria que contemple a arquitetura da informação

Proposta de melhoria do Serviço de Intercâmbio da Biblioteca da Câmara dos Deputados a partir da adoção de um novo modelo balizado pela Arquitetura da Informação e que contemple os recursos tecnológicos atualmente disponíveis. Dentre as justificativas para esta proposta estão a necessidade de modernização para manutenção do serviço, um dos pilares do desenvolvimento de coleções; e o alinhamento deste serviço ao comportamento do usuário pela busca de informação, que vem mudando após o advento da internet. A pesquisa é do tipo exploratória que apresenta a revisão de literatura como base para a fundamentação teórica, na qual são discutidos os aspectos teóricos do desenvolvimento de coleções na modalidade de aquisição por doação, realizada por meio do serviço de intercâmbio entre as bibliotecas. No procedimento metodológico foi feito um estudo no Serviço de Intercâmbio da Biblioteca da Câmara dos Deputados para obter os dados estatísticos que quantificam essa atividade. Foi elaborado um questionário, e enviado as 14 bibliotecas da Rede RVBI para conhecer o funcionamento do serviço de intercâmbio em cada uma delas. Com base nas respostas advindas do questionário foi sugerida a criação de um catálogo coletivo de acesso público via web, nos moldes do Portal Estante Virtual, para centralizar e gerenciar as atividades de intercâmbio de publicações. Os objetivos do catálogo são centralizar as informações e substituir um serviço pouco automatizado nas bibliotecas, outros objetivos do catálogo são agilizar a troca de publicações entre bibliotecas, propiciar economia de espaço, de recursos humanos e financeiros ao otimizar as rotinas e promover a democratização das listas de doações para um número maior de bibliotecas.