Studio e ottimizzazione della rimotorizzazione di un elicottero a turbina con un motore diesel

Studio del dimensionamento del radiatore e del condotto di scarico con eiettore per un motore V12 montato su elicottero.

Microchannel heat exchangers: An attractive option for the regenerator of a mobile orc waste heat recovery system

The performance of microchannel heat exchangers was assessed in gas-to-liquid applications in the order of several tens of kWth . The technology is suitable for exhaust heat recovery systems based on organic Rankine cycle. In order to design a light and compact microchannel heat exchanger, an optimization process is developed. The model employed in the procedure is validated through computational fluid-dynamics analysis with commercial software. It is shown that conjugate effects have a significant impact on the heat transfer performance of the device.

USB monitor in LabVIEW per il controllo remoto delle schede DAQ del pixel detector di ATLAS

L’esperimento ATLAS al CERN di Ginevra ha un complesso sistema di rivelatori che permettono l’acquisizione e il salvataggio di dati generati dalle collisioni di particelle fondamentali. Il rivelatore per cui trova una naturale applicazione il lavoro di questa tesi è il Pixel Detector. Esso è il più vicino alla beam pipe e si compone di più strati, il più interno dei quali, l’Insertable B-Layer (IBL), aggiunto in seguito allo shut down dell’LHC avvenuto nel 2013, ha apportato diverse innovazioni per migliorare la risoluzione spaziale delle tracce e la velocità di acquisizione dei dati. E’ stato infatti necessario modificare il sistema di acquisizione dati dell’esperimento aggiungendo nuove schede chiamate ROD, ReadOut Driver, e BOC, Back Of Crate. Entrambe le due tipologie di schede sono montate su un apparato di supporto, chiamato Crate, che le gestisce. E’ evidente che avere un sistema remoto che possa mostrare in ogni momento il regime di funzionamento del crate e che dia la possibilità di pilotarlo anche a distanza risulta estremamente utile. Così, tramite il linguaggio di programmazione LabVIEW è stato possibile progettare un sistema multipiattaforma che permette di comunicare con il crate in modo da impostare e ricevere svariati parametri di controllo del sistema di acquisizione dati, come ad esempio la temperatura, la velocità delle ventole di raffreddamento e le correnti assorbite dalle varie tensioni di alimentazione. Al momento il software viene utilizzato all’interno dell’Istituto Nazionale di Fisica Nucleare (INFN) di Bologna dove è montato un crate W-Ie-Ne-R, speculare a quello presente al CERN di Ginevra, contenente delle schede ROD e BOC in fase di test. Il progetto ed il programma sviluppato e presentato in questa tesi ha ulteriori possibilità di miglioramento e di utilizzo, dal momento che anche per altri esperimenti dell’LHC le schede di acquisizione vengono montate sullo stesso modello di crate.

Firmware development and testing for L1/L2 IBL upgrade

Il lavoro di questa tesi riguarda principalmente l'upgrade, la simulazione e il test di schede VME chiamate ReadOut Driver (ROD), che sono parte della catena di elaborazione ed acquisizione dati di IBL (Insertable B-Layer). IBL è il nuovo componente del Pixel Detector dell'esperimento ATLAS al Cern che è stato inserito nel detector durante lo shut down di LHC; fino al 2012 infatti il Pixel Detector era costituito da tre layer, chiamati (partendo dal più interno): Barrel Layer 0, Layer 1 e Layer 2. Tuttavia, l'aumento di luminosità di LHC, l'invecchiamento dei pixel e la richiesta di avere misure sempre più precise, portarono alla necessità di migliorare il rivelatore. Così, a partire dall'inizio del 2013, IBL (che fino a quel momento era stato un progetto sviluppato e finanziato separatamente dal Pixel Detector) è diventato parte del Pixel Detector di ATLAS ed è stato installato tra la beam-pipe e il layer B0. Questa tesi fornirà innanzitutto una panoramica generale dell'esperimento ATLAS al CERN, includendo aspetti sia fisici sia tecnici, poi tratterà in dettaglio le varie parti del rivelatore, con particolare attenzione su Insertable B-Layer. Su quest'ultimo punto la tesi si focalizzerà sui motivi che ne hanno portato alla costruzione, sugli aspetti di design, sulle tecnologie utilizzate (volte a rendere nel miglior modo possibile compatibili IBL e il resto del Pixel Detector) e sulle scelte di sviluppo e fabbricazione. La tesi tratterà poi la catena di read-out dei dati, descrivendo le tecniche di interfacciamento con i chip di front-end, ed in particolare si concentrerà sul lavoro svolto per l'upgrade e lo sviluppo delle schede ReadOut Drivers (ROD) introducendo le migliorie da me apportate, volte a eliminare eventuali difetti, migliorare le prestazioni ed a predisporre il sistema ad una analisi prestazionale del rivelatore. Allo stato attuale le schede sono state prodotte e montate e sono già parte del sistema di acquisizione dati del Pixel Detector di ATLAS, ma il firmware è in continuo aggiornamento. Il mio lavoro si è principalmente focalizzato sul debugging e il miglioramento delle schede ROD; in particolare ho aggiunto due features: - programmazione parallela delle FPGA} delle ROD via VME. IBL richiede l'utilizzo di 15 schede ROD e programmandole tutte insieme (invece che una alla volta) porta ad un sensibile guadagno nei tempi di programmazione. Questo è utile soprattutto in fase di test; - reset del Phase-Locked Loop (PLL)} tramite VME. Il PLL è un chip presente nelle ROD che distribuisce il clock a tutte le componenti della scheda. Avere la possibilità di resettare questo chip da remoto permette di risolvere problemi di sincronizzazione. Le ReadOut Driver saranno inoltre utilizzate da più layer del Pixel Detector. Infatti oltre ad IBL anche i dati provenienti dai layer 1 e 2 dei sensori a pixel dell’esperimento ATLAS verranno acquisiti sfruttando la catena hardware progettata, realizzata e testata a Bologna.

Oxidative stress and inflammation response after nanoparticle exposure: differences between human lung cell monocultures and an advanced three-dimensional model of the human epithelial airways

Combustion-derived and manufactured nanoparticles (NPs) are known to provoke oxidative stress and inflammatory responses in human lung cells; therefore, they play an important role during the development of adverse health effects. As the lungs are composed of more than 40 different cell types, it is of particular interest to perform toxicological studies with co-cultures systems, rather than with monocultures of only one cell type, to gain a better understanding of complex cellular reactions upon exposure to toxic substances. Monocultures of A549 human epithelial lung cells, human monocyte-derived macrophages and monocyte-derived dendritic cells (MDDCs) as well as triple cell co-cultures consisting of all three cell types were exposed to combustion-derived NPs (diesel exhaust particles) and to manufactured NPs (titanium dioxide and single-walled carbon nanotubes). The penetration of particles into cells was analysed by transmission electron microscopy. The amount of intracellular reactive oxygen species (ROS), the total antioxidant capacity (TAC) and the production of tumour necrosis factor (TNF)-alpha and interleukin (IL)-8 were quantified. The results of the monocultures were summed with an adjustment for the number of each single cell type in the triple cell co-culture. All three particle types were found in all cell and culture types. The production of ROS was induced by all particle types in all cell cultures except in monocultures of MDDCs. The TAC and the (pro-)inflammatory reactions were not statistically significantly increased by particle exposure in any of the cell cultures. Interestingly, in the triple cell co-cultures, the TAC and IL-8 concentrations were lower and the TNF-alpha concentrations were higher than the expected values calculated from the monocultures. The interplay of different lung cell types seems to substantially modulate the oxidative stress and the inflammatory responses after NP exposure.

Oral health risks of tobacco use and effects of cessation

The purpose of this paper is to review the epidemiologic evidence for the effects of tobacco use and tobacco use cessation on a variety of oral diseases and conditions. Exposures considered include cigarette and bidi smoking, pipe and cigar smoking, and smokeless tobacco use. Oral diseases and disorders considered include oral cancer and precancer, periodontal disease, caries and tooth loss, gingival recession and other benign mucosal disorders as well as implant failure. Particular attention is given to the impact of tobacco use cessation on oral health outcomes. We conclude that robust epidemiologic evidence exists for adverse oral health effects of tobacco smoking and other types of tobacco use. In addition, there is compelling evidence to support significant benefits of tobacco use cessation with regard to various oral health outcomes. Substantial oral health benefits can be expected from abstention and successful smoking cessation in a variety of populations across all ages.

Oral leukoplakia in China: a review

BACKGROUND: Most prevalence studies on oral leukoplakia (OL) in China have been published in the Chinese language. The present review on the literature in Chinese aimed at making the data available to colleagues who are not familiar with the Chinese language. METHODS: The overall rate and 95% confidence interval of OL were calculated using Excel 2003. RESULTS: Overall prevalence of OL was 9.18% (95%CI = 9.06-9.30%). Gender ratio of prevalence was 8.03:1 (males/females). Prevalence was high in age groups over 40 years with the highest in the group aged 60-69 years (21.04%, 95%CI = 19.95-22.13%). The buccal mucosa was most commonly affected (47.08%, 95%CI = 46.52-47.64%), followed by lip (39.09%), palate (9.85%), gingiva (1.80%), and tongue (1.46%). The prevalence in smokers was 23.43% and in non-smokers 1.93%. Among three variants of smoking, the traditional Hanyan pipe smoking carried the highest risk for the development of OL followed by cigarette and Shuiyan water pipe smoking. The rate of alcohol drinkers with OL was 54.50% and 22.21% in individuals without OL. No case of oral cancer was found in six surveys. CONCLUSIONS: The present data on the prevalence of OL in China are comparable to those in other parts of the world. Some traditional smoking habits, however, are particular to certain regions of China.

Biomechanical effects of environmental and engineered particles on human airway smooth muscle cells

The past decade has seen significant increases in combustion-generated ambient particles, which contain a nanosized fraction (less than 100 nm), and even greater increases have occurred in engineered nanoparticles (NPs) propelled by the booming nanotechnology industry. Although inhalation of these particulates has become a public health concern, human health effects and mechanisms of action for NPs are not well understood. Focusing on the human airway smooth muscle cell, here we show that the cellular mechanical function is altered by particulate exposure in a manner that is dependent upon particle material, size and dose. We used Alamar Blue assay to measure cell viability and optical magnetic twisting cytometry to measure cell stiffness and agonist-induced contractility. The eight particle species fell into four categories, based on their respective effect on cell viability and on mechanical function. Cell viability was impaired and cell contractility was decreased by (i) zinc oxide (40-100 nm and less than 44 microm) and copper(II) oxide (less than 50 nm); cell contractility was decreased by (ii) fluorescent polystyrene spheres (40 nm), increased by (iii) welding fumes and unchanged by (iv) diesel exhaust particles, titanium dioxide (25 nm) and copper(II) oxide (less than 5 microm), although in none of these cases was cell viability impaired. Treatment with hydrogen peroxide up to 500 microM did not alter viability or cell mechanics, suggesting that the particle effects are unlikely to be mediated by particle-generated reactive oxygen species. Our results highlight the susceptibility of cellular mechanical function to particulate exposures and suggest that direct exposure of the airway smooth muscle cells to particulates may initiate or aggravate respiratory diseases.

Development of a model-based transient calibration process for diesel engine electronic control module tables – Part 1: data requirements, processing, and analysis

This is the first part of a study investigating a model-based transient calibration process for diesel engines. The motivation is to populate hundreds of parameters (which can be calibrated) in a methodical and optimum manner by using model-based optimization in conjunction with the manual process so that, relative to the manual process used by itself, a significant improvement in transient emissions and fuel consumption and a sizable reduction in calibration time and test cell requirements is achieved. Empirical transient modelling and optimization has been addressed in the second part of this work, while the required data for model training and generalization are the focus of the current work. Transient and steady-state data from a turbocharged multicylinder diesel engine have been examined from a model training perspective. A single-cylinder engine with external air-handling has been used to expand the steady-state data to encompass transient parameter space. Based on comparative model performance and differences in the non-parametric space, primarily driven by a high engine difference between exhaust and intake manifold pressures (ΔP) during transients, it has been recommended that transient emission models should be trained with transient training data. It has been shown that electronic control module (ECM) estimates of transient charge flow and the exhaust gas recirculation (EGR) fraction cannot be accurate at the high engine ΔP frequently encountered during transient operation, and that such estimates do not account for cylinder-to-cylinder variation. The effects of high engine ΔP must therefore be incorporated empirically by using transient data generated from a spectrum of transient calibrations. Specific recommendations on how to choose such calibrations, how many data to acquire, and how to specify transient segments for data acquisition have been made. Methods to process transient data to account for transport delays and sensor lags have been developed. The processed data have then been visualized using statistical means to understand transient emission formation. Two modes of transient opacity formation have been observed and described. The first mode is driven by high engine ΔP and low fresh air flowrates, while the second mode is driven by high engine ΔP and high EGR flowrates. The EGR fraction is inaccurately estimated at both modes, while EGR distribution has been shown to be present but unaccounted for by the ECM. The two modes and associated phenomena are essential to understanding why transient emission models are calibration dependent and furthermore how to choose training data that will result in good model generalization.

A Decision-Tree-Based Approach to Smoke Spike Detection in a Heavy-Duty Diesel Engine

Smoke spikes occurring during transient engine operation have detrimental health effects and increase fuel consumption by requiring more frequent regeneration of the diesel particulate filter. This paper proposes a decision tree approach to real-time detection of smoke spikes for control and on-board diagnostics purposes. A contemporary, electronically controlled heavy-duty diesel engine was used to investigate the deficiencies of smoke control based on the fuel-to-oxygen-ratio limit. With the aid of transient and steady state data analysis and empirical as well as dimensional modeling, it was shown that the fuel-to-oxygen ratio was not estimated correctly during the turbocharger lag period. This inaccuracy was attributed to the large manifold pressure ratios and low exhaust gas recirculation flows recorded during the turbocharger lag period, which meant that engine control module correlations for the exhaust gas recirculation flow and the volumetric efficiency had to be extrapolated. The engine control module correlations were based on steady state data and it was shown that, unless the turbocharger efficiency is artificially reduced, the large manifold pressure ratios observed during the turbocharger lag period cannot be achieved at steady state. Additionally, the cylinder-to-cylinder variation during this period were shown to be sufficiently significant to make the average fuel-to-oxygen ratio a poor predictor of the transient smoke emissions. The steady state data also showed higher smoke emissions with higher exhaust gas recirculation fractions at constant fuel-to-oxygen-ratio levels. This suggests that, even if the fuel-to-oxygen ratios were to be estimated accurately for each cylinder, they would still be ineffective as smoke limiters. A decision tree trained on snap throttle data and pruned with engineering knowledge was able to use the inaccurate engine control module estimates of the fuel-to-oxygen ratio together with information on the engine control module estimate of the exhaust gas recirculation fraction, the engine speed, and the manifold pressure ratio to predict 94% of all spikes occurring over the Federal Test Procedure cycle. The advantages of this non-parametric approach over other commonly used parametric empirical methods such as regression were described. An application of accurate smoke spike detection in which the injection pressure is increased at points with a high opacity to reduce the cumulative particulate matter emissions substantially with a minimum increase in the cumulative nitrogrn oxide emissions was illustrated with dimensional and empirical modeling.

Design, Construction, and Validation of an Atmospheric Combustor for Alternative Fuel Studies

An atmospheric combustion apparatus was designed through several iterations for Bucknell University's combustion laboratory. The final design required extensive fine-tuning of the fuel and air systems and repeated tests to arrive at a satisfactory procedure to transfer from gaseous to liquid fuel operation. Measurement of exhaust emissions were obtained under tests of gaseous methane and liquid heptane were operation in order to validate the functionality of the combustion apparatus, the fuel transition procedure, and emissions analyzer systems. The emission concentrations of CO, CO2, NOx, 02, S02, and unburned hydrocarbons from a multianalyzer and HFID analyzer were obtained for a range of equivalence ratios. The results verify the potential for future alternative fuel tests and illuminate necessary alterations for further liquid fuel studies.

Gasoline emissions dominate over diesel in formation of secondary organic aerosol mass

Although laboratory experiments have shown that organic compounds in both gasoline fuel and diesel engine exhaust can form secondary organic aerosol (SOA), the fractional contribution from gasoline and diesel exhaust emissions to ambient SOA in urban environments is poorly known. Here we use airborne and ground-based measurements of organic aerosol (OA) in the Los Angeles (LA) Basin, California made during May and June 2010 to assess the amount of SOA formed from diesel emissions. Diesel emissions in the LA Basin vary between weekdays and weekends, with 54% lower diesel emissions on weekends. Despite this difference in source contributions, in air masses with similar degrees of photochemical processing, formation of OA is the same on weekends and weekdays, within the measurement uncertainties. This result indicates that the contribution from diesel emissions to SOA formation is zero within our uncertainties. Therefore, substantial reductions of SOA mass on local to global scales will be achieved by reducing gasoline vehicle emissions.

Design and Use of an Alternative Fuel Testing Apparatus and Assessment of the Feasibility of Biodiesel

Petroleum supply and environmental pollution issues constantly increase interest in renewable low polluting alternative fuels. Published test results show decreased pollution with similar power output and fuel consumption from Internal Combustion Engines (ICE) burning alternative fuels. More specifically, diesel engines burning biodiesel derived from plant oils and animal fats not only reduce harmful exhaust emissions but are renewable and environmentally friendly. To validate these claims and assess the feasibility of alternative fuels, independent engine dynamometer and emissions testing was performed. A testing apparatus capable of making relevant measurements was designed, built, and used to test and determine the feasibility of biodiesel. The apparatus marks the addition of a valuable testing tool to the University and provides a foundation for future experiments. This thesis will discuss the background of biodiesel, testing methods, design and function of the testing apparatus, experimental results, relevant calculations, and conclusions.

Analysis and Prediction of Transient Opacity Spikes Using Dimensional Modeling

Dimensional modeling, GT-Power in particular, has been used for two related purposes-to quantify and understand the inaccuracies of transient engine flow estimates that cause transient smoke spikes and to improve empirical models of opacity or particulate matter used for engine calibration. It has been proposed by dimensional modeling that exhaust gas recirculation flow rate was significantly underestimated and volumetric efficiency was overestimated by the electronic control module during the turbocharger lag period of an electronically controlled heavy duty diesel engine. Factoring in cylinder-to-cylinder variation, it has been shown that the electronic control module estimated fuel-Oxygen ratio was lower than actual by up to 35% during the turbocharger lag period but within 2% of actual elsewhere, thus hindering fuel-Oxygen ratio limit-based smoke control. The dimensional modeling of transient flow was enabled with a new method of simulating transient data in which the manifold pressures and exhaust gas recirculation system flow resistance, characterized as a function of exhaust gas recirculation valve position at each measured transient data point, were replicated by quasi-static or transient simulation to predict engine flows. Dimensional modeling was also used to transform the engine operating parameter model input space to a more fundamental lower dimensional space so that a nearest neighbor approach could be used to predict smoke emissions. This new approach, intended for engine calibration and control modeling, was termed the "nonparametric reduced dimensionality" approach. It was used to predict federal test procedure cumulative particulate matter within 7% of measured value, based solely on steady-state training data. Very little correlation between the model inputs in the transformed space was observed as compared to the engine operating parameter space. This more uniform, smaller, shrunken model input space might explain how the nonparametric reduced dimensionality approach model could successfully predict federal test procedure emissions when roughly 40% of all transient points were classified as outliers as per the steady-state training data.

Performance and emissions testing of a small two stroke engine using mid-level ethanol blends

With the introduction of the mid-level ethanol blend gasoline fuel for commercial sale, the compatibility of different off-road engines is needed. This report details the test study of using one mid-level ethanol fuel in a two stroke hand held gasoline engine used to power line trimmers. The study sponsored by E3 is to test the effectiveness of an aftermarket spark plug from E3 Spark Plug when using a mid-level ethanol blend gasoline. A 15% ethanol by volume (E15) is the test mid-level ethanol used and the 10% ethanol by volume (E10) was used as the baseline fuel. The testing comprises running the engine at different load points and throttle positions to evaluate the cylinder head temperature, exhaust temperature and engine speed. Raw gas emissions were also measured to determine the impact of the performance spark plug. The low calorific value of the E15 fuel decreased the speed of the engine along with reduction in the fuel consumption and exhaust gas temperature. The HC emissions for E15 fuel and E3 spark plug increased when compared to the base line in most of the cases and NO formation was dependent on the cylinder head temperature. The E3 spark plug had a tendency to increase the temperature of the cylinder head irrespective of fuel type while reducing engine speed.