Implantação de sistemas de gestão ambiental ISO 14001: uma contribuição da área de gestão de pessoas

Os sistemas certificáveis de gestão ambiental, como a norma ISO 14001, têm sido uma opção cada vez mais utilizada pelas organizações para equacionarem suas demandas ambientais, padronizarem seu processo produtivo, reduzirem custos de produção e melhorarem sua imagem. Entretanto, seu processo de implantação em indústrias gera mudanças significativas na cultura e estrutura destas empresas e devem ser devidamente consideradas por gestores e consultores. Pelo exposto, o principal objetivo deste artigo é apresentar práticas, sistematizadas à luz da teoria com especial contribuição da área de gestão de pessoas e com base em dois estudos de caso, para implantação de sistemas de gestão ambiental ISO 14001 em empresas industriais. Para tanto, foram realizados dois estudos de caso: um em uma empresa de baterias automotivas e outro em uma empresa moveleira. Os dados foram coletados a partir de entrevistas semiestruturadas com os gestores diretamente responsáveis por estes sistemas e com colaboradores-chave, observação in loco e análise de documentos. Ao final do artigo são apresentadas sugestões de práticas relacionadas aos seguintes elementos: alta direção, gestão de pessoas, comitê de gestão ambiental, missão e políticas, treinamento e comunicação.

Aspectos e impactos ambientais de pedreira em área urbana

O conceito de desempenho ambiental tem sido utilizado como forma para revelar as relações da empresa com o meio ambiente e com a sociedade, constituindo um parâmetro de análise da sua postura diante das questões sócio-ambientais. A avaliação dos aspectos e impactos ambientais gerados por determinada atividade é um instrumento da gestão ambiental, sendo aplicado, nesse trabalho, em uma pedreira de diabásio, na área de expansão urbana, no município de Campinas (SP). Foram avaliados os aspectos e impactos das etapas produtivas da pedreira e de suas instalações administrativas. Os impactos adversos mais significativos levantados foram a sobrepressão atmosférica e a vibração do terreno, causando desconforto à comunidade. Após tais levantamentos, algumas ações de melhoria foram implantadas pela empresa e resultaram na diminuição das reclamações por parte da comunidade; outras medidas, pró-ativas, devem ainda ser implementadas, principalmente aquelas voltadas para a prevenção de impactos negativos e a preservação do meio ambiente, além da recuperação da área degradada, como medida reativa.

Colorimetric determination of formaldehyde in air using a hanging drop of chromotropic acid

A simple and sensitive method to determine parts per billion (ppb) of atmospheric formaldehyde in situ, using chromotropic acid, is described. A colorimetric sensor, coupled to a droplet of 15.5 muL chromotropic acid, was constructed and used to sample and quantify formaldehyde. The sensor was set up with two optical fibers, a right emitting diode (LED) and two photodiodes. The reference and transmitted light were measured by a photodetection arrangement that converts the signals into units of absorbance. Air was sampled around the chromotropic acid droplet. A purple product was formed and measured after the sampling terminated (typically 7 min). The response is proportional to the sampling period, analyte concentration and sample flow rate. The detection limit is similar to2 ppb and can be improved by using longer sampling times and/or a sampling flow rate higher than that used in this work, 200 mL min(-1). The present technique affords a simple, inexpensive near real-time measurement with very little reagent consumption. The method is selective and highly sensitive. This sensor could be used either for outdoor or indoor atmospheres.

Characterization of humic-rich hydrocolloids and their metal species by means of competing ligand and metal exchange - an on-site approach

An improved on-site characterization of humic-rich hydrocolloids and their metal species in aquatic environments was the goal of the present approach. Both ligand exchange with extreme chelators ( diethylenetetraaminepentaacetic acid ( DTPA), ethylendiaminetetraacetic acid ( EDTA)) and metal exchange with strongly competitive cations (Cu(II)) were used on-site to characterize the conditional stability and availability of colloidal metal species in a humic-rich German bogwater lake ( Venner Moor, Munsterland). A mobile time-controlled tangential-flow ultrafiltration technique (cut-off: 1 kDa) was applied to differentiate operationally between colloidal metal species and free metal ions, respectively. DOC ( dissolved organic carbon) and metal determinations were carried out off-site using a home-built carbon analyzer and conventional ICP-OES ( inductively-coupled plasma-optical emission spectrometry), respectively. From the metal exchange equilibria obtained on-site the kinetic and thermodynamic stability of the original metal species ( Fe, Mn, Zn) could be characterized. Conditional exchange constants K ex obtained from aquatic metal species and competitive Cu(II) ions follow the order Mn > Zn >> Fe. Obviously, Mn and Zn bound to humic-rich hydrocolloids are very strongly competed by Cu( II) ions, in contrast to Fe which is scarcely exchangeable. The exchange of aquatic metal species (e.g. Fe) by DTPA/EDTA exhibited relatively slow kinetics but rather high metal availabilities, in contrast to their Cu(II) exchange.

Aquatic humus from an unpolluted Brazilian dark-brown stream: general characterization and size fractionation of bound heavy metals

The main pool of dissolved organic carbon in tropical aquatic environments, notably in dark-coloured streams, is concentrated in humic substances (HS). Aquatic HS are large organic molecules formed by micro-biotic degradation of biopolymers and polymerization of smaller organic molecules. From an environmental point of view, the study of metal-humic interactions is often aimed at predicting the effect of aquatic HS on the bioavailability of heavy metal ions in the environment. In the present work the aquatic humic substances (HS) isolated from a dark-brown stream (located in an environmental protection area near Cubatao city in São Paulo-State, Brazil) by means of the collector XAD-8 were investigated. FTIR studies showed that the carboxylic carbons are probably the most important binding sites for Hg(II) ions within humic molecules. C-13-NMR and H-1-NMR studies of aquatic HS showed the presence of constituents with a high degree of aromaticity (40% of carbons) and small substitution. A special five-stage tangential-flow ultrafiltration device (UF) was used for size fractionation of the aquatic HS under study and for their metal species in the molecular size range 1-100 kDa (six fractions). The fractionation patterns showed that metal traces remaining in aquatic HS after their XAD-8 isolation have different distributions. Generally, the major percentage of traces of Mn, Cd and Ni (determined by ICP-AES) was preferably complexed by molecules with relatively high molecular size. Cu was bound by fractions with low molecular size and Co showed no preferential binding site in the various humic fractions. Moreover, the species formed between aquatic HS and Hg(II), prepared by spiking (determined by CVAAS), appeared to be concentrated in the relatively high molecular size fraction F-1 (> 100 kDa).

Investigation of the Genotoxic Potential of the Waters of a River Receiving Tannery Effluents by Means of the in vitro Comet Assay

The comet assay has been described as an efficient tool for the detection of changes in the DNA molecule of cells exposed to contaminating agents in vivo and in vitro. The possible environmental contamination due to the persistence of chromium residues from tannery effluents was determined in the waters of the Córrego dos Bagres stream, Municipal district of Franca/SP, by the comet assay on CHO-K1 cells. Water samples were collected during the four seasons of the year 2001 at three distinct stations along the river. The data suggest that the comet test showed good sensitivity for the environmental monitoring of these waters and indicated that this test can be efficient for the determination of the quality of waters contaminated with effluents containing heavy metal residues such as chromium.

Dissipation of DDT in a heavily contaminated soil in Mato Grosso, Brazil

After the prohibition of organochlorine-pesticide use in Brazil for controlling insect vector diseases, Mato Grosso State gathered the exceeding DDT and stored it irregularly in an open air area that belongs to the National Health Foundation, causing soil contamination. This study aimed to evaluate the contamination level and dissipation of p,p′-DDT and p,p′-DDE in this area. For that, surface soil samples were collected on 19 September 2000, 15 December 2000, 4 April 2001 and soil samples 30-40 cm; 60-70 cm and 90-100 cm deep were taken from five points in the studied area on 17 July 2001. The contaminants were determined by a small scale method which consists on extraction and clean-up steps combined into one step by transferring soil samples mixed with neutral alumina to a chromatographic column prepacked with neutral alumina and elution with hexane:dichloromethane (7:3 v:v). The eluate was concentrated and the analytes were quantified by gas chromatography with an electron-capture detector. p,p′-DDT at surface soil ranged from 3800 to 7300 mg kg -1. 30-40 cm deep soil sample concentrations varied from 0.036 to 440 mg kg -1 while 90-100 cm deep samples varied from 0.069 to 180 mg kg -1. Volatilization is probably the main dissipation process. The p,p′-DDT is moving slowly downward in the soil profile, however, the levels of this contaminant are high enough to present risk to underground waters. © 2005 Elsevier Ltd. All rights reserved.

Residues of organochlorine pesticides and PCBs in some Brazilian municipal solid waste compost

Persistent organic pollutants (POPs), organochlorine pesticides and polychlorinated biphenyls (PCBs), listed as per the Stockholm Convention (α -HCH, β -HCH, γ -HCH, p,p′-DDT, o,p′-DDT, p,p′-DDD, p,p′-DDE, aldrin, endrin, dieldrin, PCBs 28, 52, 118, 138, 153, and 180), were analyzed in municipal solid waste (MSW) compost samples from three different Brazilian composting plants located in three São Paulo State cities: Araras, Araraquara and São Paulo (Vila Leopoldinha). Quantitative and qualitative analyses were carried out using gas chromatography electron capture detection (GC-ECD) and gas chromatography mass spectrometry (GC-MS) (Ion Trap, electron impact ionization), respectively. The samples were analyzed in triplicate and the target POPs were not detected by GC-ECD. Twelve pollutants were identified in two samples when qualitative analysis (GC-MS) was used (β -HCH, γ -HCH, p,p′-DDT, o,p′-DDT, p,p′-DDD, and p,p′-DDE, PCBs 28, 118, 138, 153 and 180). The composting process has advantages such as urban solid waste reduction and landfill life-span increase, however the MSW compost quality, which can be utilized for agricultural purposes, should be evaluated and be controlled. This kind of study is the first step in making available information to answer questions regarding MSW compost for sustainable agricultural use, such as the pollutants accumulation in soil and in groundwater, and plants uptake. Copyright © Taylor & Francis Group, LLC.

Relief influence on the spatial distribution of the Atlantic Forest cover on the Ibiúna Plateau, SP

Several studies suggest that, on a large scale, relief conditions influence the Atlantic Forest cover. The aim of this work was to explore these relationships on a local scale, in Caucaia do Alto, on the Ibiúna Plateau. Within an area of about 78 km2, the distribution of forest cover, divided into two successional stages, was associated with relief attribute data (slope, slope orientation and altitude). The mapping of the vegetation was based on the interpretation of stereoscopic pairs of aerial photographs, from April 2000, on a scale of 1:10,000, while the relief attributes were obtained by geoprocessing from digitalized topographic maps on a scale of 1:10,000. Statistical analyses, based on qui-square tests, revealed that there was a more extensive forest cover, irrespective of the successional stage, in steeper areas (>10 degrees) located at higher altitudes (>923 m), but no influence of the slope orientation. There was no sign of direct influence of relief on the forest cover through environmental gradients that might have contributed to the forest regeneration. Likewise, there was no evidence that these results could have been influenced by the distance from roads or urban areas or with respect to permanent preservation areas. Relief seems to influence the forest cover indirectly, since agricultural land use is preferably made in flatter and lower areas. These results suggest a general distribution pattern of the forest remnants, independent of the scale of study, on which relief indirectly has a strong influence, since it determines human occupation.

Análise das condições hidrológicas em bacias hidrográficas com differentes uso e ocupação do solo

The analysis of the physical medium in hydrographic basins requires knowledge of the processes involved and characteristics of variables at different geographic scales. Considering the principle that the micro-basins can be categorized, they are then considered territorial units of ideal work for the analysis of hydrologic conditions. The objective of this work was to compare water resources of four hydrographic basins' with different land use and occupation. Five sampling points along the drainage network of hydrographic basins of first order of magnitude and a sampling point in the river mouth of M1 and M4 micro-basins were established. The water collections occurred at monthly intervals from August, 2006 to August, 2007. Temperature (°C), turbidity (NTU), odor, pH, electric conductivity (μS cm-1), dissolved oxygen (mg/L), total dissolved solids (ppm) and total phosphorous (mg/L) were the variables evaluated in the study. The highest variability of the parameters was found in hydrographic basins M2 and M3. The characterization of the hydrologic conditions of the hydrographic micro-basins indicated that agricultural activities, including cultural practices of anthropic activities affect water resources.

Capacidade de carga real (ccr) da caverna de santana, parque estadual turístico do alto ribeira (Petar) - sp, e indicações para o seu manejo turístico

The tourist use of Santana cave provides a row of environmental damages, compromising partially the pristine conditions. Among the measures adopted to avoid this situation, this issue presents a contribution for the physical limits to tourist visitation and the indications for speleotouristic management. It was used the Cifuentes Carrying Capacity method and some basic principles of Visitors Impact Management Framework - VIM. The results show a Real Carrying Capacity (CCR) about 120 visits daily on the cave. The discussions raise a few hypotheses about the alteration in the method used and the temporal frequency between visitors groups, suggesting a provisional CCR of 117 and 135 visitors daily, respectively, during the week and in the weekends and holidays. The conclusions appoint the necessity of a conceptual revision in the Carrying Capacity methods, mainly about its adaptation for tourist management in caves. In the case studied, it is suggested the immediate beginning of environmental monitoring of the cave, to verify the plausibility from proposed visitation limits and the possible contributions for to mitigate the environmental impacts from speleotourism.

Condições hidrológicas de uma bacia hidrográfica com diferentes usos do solo na região de taquaritinga, SP

In areas where human activities, as agriculture, are developed land use contributes to physical, chemical and biological characteristics of water. This study aimed to identify physical and chemical variations of the water monitoring network in 4 first magnitude watersheds with different land use/occupation in the hydrographic basin of the Glori Farm Creek in the city of Taquaritinga, State of Sao Paulo, from February to July, 2005. The methodology consisted of weekly sample water collections to naalyze turbidity, temperature, dissolved oxygen, pH and electric conductivity. The characterization of the hydrological conditions of the watersheds showed that agricultural activities, including the productive system of the sugarcane cultivation, have affected the quality of water resources.

A PZT-based technique for SHM using the coherence function

This paper presents a new approach for damage detection in structural health monitoring systems exploiting the coherence function between the signals from PZT (Lead Zirconate Titanate) transducers bonded to a host structure. The physical configuration of this new approach is similar to the configuration used in Lamb wave based methods, but the analysis and operation are different. A PZT excited by a signal with a wide frequency range acts as an actuator and others PZTs are used as sensors to receive the signal. The coherences between the signals from the PZT sensors are obtained and the standard deviation for each coherence function is computed. It is demonstrated through experimental results that the standard deviation of the coherence between the signals from the PZTs in healthy and damaged conditions is a very sensitive metric index to detect damage. Tests were carried out on an aluminum plate and the results show that the proposed methodology could be an excellent approach for structural health monitoring (SHM) applications.

Expenditures, investment and financing for sustainable development in Trinidad and Tobago

Includes bibliography