Surface, Thermal and Antimicrobial Release Properties of Plasma-Treated Zein Films

The effects of dielectric barrier discharge plasma treatment on zein film containing thymol as an active ingredient were evaluated. The plasma discharge was optically characterized to identify the reactive species. A significant increase in the film roughness (p < 0.05) was observed due to the etching effect of DBD plasma, which was correlated with the increase in the diffusion rate of thymol in the food simulant. The diffusion of thymol from the zein film was measured in aqueous solution. The kinetics of thymol release followed the Fick’s law of diffusion as shown by the high correlation coefficients between experimental and theoretical data. No significant change (p > 0.05) was observed for the thermal properties of the antimicrobial films after DBD plasma treatment.

Thermal model for charring rate calculation in wooden cellular slabs under fire

Wood is a natural and traditional building material, as popular today as ever, and presents advantages. Physically, wood is strong and stiff, but compared with other materials like steel is light and flexible. Wood material can absorb sound very effectively and it is a relatively good heat insulator. But dry wood burns quite easily and produces a great deal of heat energy. The main disadvantage is the high level of combustion when exposed to fire, where the point at which it catches fire is from 200–400°C. After fire exposure, is need to determine if the charred wooden structures are safe for future use. Design methods require the use of computer modelling to predict the fire exposure and the capacity of structures to resist those action. Also, large or small scale experimental tests are necessary to calibrate and verify the numerical models. The thermal model is essential for wood structures exposed to fire, because predicts the charring rate as a function of fire exposure. The charring rate calculation of most structural wood elements allows simple calculations, but is more complicated for situations where the fire exposure is non-standard and in wood elements protected with other materials. In this work, the authors present different case studies using numerical models, that will help professionals analysing woods elements and the type of information needed to decide whether the charred structures are adequate or not to use. Different thermal models representing wooden cellular slabs, used in building construction for ceiling or flooring compartments, will be analysed and submitted to different fire scenarios (with the standard fire curve exposure). The same numerical models, considering insulation material inside the wooden cellular slabs, will be tested to compare and determine the fire time resistance and the charring rate calculation.

Thermal model for charring rate calculation in wooden cellular slabs under fire

Wood is a natural and traditional building material, as popular today as ever, and presents advantages. Physically, wood is strong and stiff, but compared with other materiais like steel is light and flexible. Wood material can absorb sound very effectively and it is a relatively good heat insulator. But dry wood does bum quite easily md produces a great deal ofheat energy. The main disadvantage is the high levei ofcombustion when exposed to fíre, where the point at which it catches fire is fi-om 200-400°C. After fu-e exposure, is need to determine if the charred wooden stmctures are safe for future use. Design methods require the use ofcomputer modelling to predict the fíre exposure and the capacity ofstructures to resist fhose action. Also, large or small scale experimental tests are necessary to calibrate and verify the numerical models. The thermal model is essential for wood stmctures exposed to fire, because predicts the charring rate as a fünction offire exposure. The charring rate calculation ofmost stmctural wood elements allows simple calculations, but is more complicated for situations where the fire exposure is non-standard and in wood elements protected with other materiais.

The uncertain future of the coal energy industry in Germany. OSW COMMENTARY #188, 2015-10-20

Germany’s current energy strategy, known as the “energy transition”, or Energiewende, involves an accelerated withdrawal from the use of nuclear power plants and the development of renewable energy sources (RES). According to the government’s plans, the share of RES in electricity production will gradually increase from its present rate of 26% to 80% in 2050. Greenhouse gas emissions are expected to fall by 80–95% by 2050 when compared to 1990 levels. However, coal power plants still predominate in Germany’s energy mix – they produced 44% of electricity in 2014 (26% from lignite and 18% from hard coal). This makes it difficult to meet the emission reduction objectives, lignite combustion causes the highest levels of greenhouse gas emissions. In order to reach the emission reduction goals, the government launched the process of accelerating the reduction of coal consumption. On 2 July, the Federal Ministry for Economic Affairs and Energy published a plan to reform the German energy market which will be implemented during the present term of government. Emission reduction from coal power plants is the most important issue. This problem has been extensively discussed over the past year and has transformed into a conflict between the government and the coal lobby. The dispute reached its peak when lignite miners took to the streets in Berlin. As the government admits, in order to reach the long-term emission reduction objectives, it is necessary to completely liquidate the coal energy industry in Germany. This is expected to take place within 25 to 30 years. However, since the decision to decommission nuclear power plants was passed, the German ecological movement and the Green Party have shifted their attention to coal power plants, demanding that these be decommissioned by 2030 at the latest.

The measurement of liver circulation by means of the colloid disapperance rate.

Unclassified Health and Biology.

A radio-release technique for the measurement of moisture in gases : final report /

"Contract No. AT-(40-1)-2513."

A review of current information on some ecological and health related aspects of the release of trace metals into the environment associated with the combustion of coal /

Issued June 1977.

Release and movement of radionuclides in soils contaminated with fallout materials from an underground thermonuclear detonation /

Project Sedan.

HIgh repetition rate pulser for beam switching magnet /

"AEC Contract AT(04-3)-400."

Radioisotope powered cardiac pacemaker program. Safety analysis: preliminary dose rate evaluation.

Prepared for U. S. Atomic Energy Commission by Nuclear Materials and Equipment Corporation, Apollo, Penn.

A report to the Illinois General Assembly pursuant to the Illinois Energy Assistance Act 305 ILCS 20 : Supplemental Low-Income Energy Assistance Fund expenditures : January 1998 through June 2003.

The Supplemental Low Income Energy Assistance Fund is the depository for energy assistance charges collected by utilities and participating municipal utilities and electric cooperatives authorized by the Electric Customer Choice and Rate Relief Act of 1997 (220 ILCS 5). The energy assistance charges provided a nonfederal funding stream to the Department for use in providing energy related assistance to low-income households under the Illinois Low Income Home Energy Assistance and Illinois Home Weatherization (LIHEAP) Programs. Since the changes were imposed in January of 1998, $406,683,769 has been deposited into the Fund through December 2003. Of this amount, the Department has spent $326,137,510 to provide energy assistance to 802,091 households; $33,845,784 to weatherize 6,584 homes; and $32,570,739 to cover administrative expenses.

A study of the dynamic flue-gas temperature and off-period mass flow rate of a residential gas-fired furnace /

Includes bibliographical references (p. 31).

AEC News Release

Each issue has a distinctive title.

Nonbreeding Eastern Curlews Numenius madagascariensis Do Not Increase the Rate of Intake or Digestive Efficiency before Long-Distance Migration because of an Apparent Digestive Constraint

The possibility of premigratory modulation in gastric digestive performance was investigated in a long-distance migrant, the eastern curlew (Numenius madagascariensis), in eastern Australia. The rate of intake in the curlews was limited by the rate of digestion but not by food availability. It was hypothesized that before migration, eastern curlews would meet the increased energy demand by increasing energy consumption. It was predicted that (1) an increase in the rate of intake and the corresponding rate of gastric throughput would occur or (2) the gastric digestive efficiency would increase between the mid-nonbreeding and premigratory periods. Neither crude intake rate (the rate of intake calculated including inactive pauses; 0.22 g DM [grams dry mass] or 3.09 kJ min(-1)) nor the rate of gastric throughput (0.15 g DM or 2.85 kJ min(-1)) changed over time. Gastric digestive efficiency did not improve between the periods (91%) nor did the estimated overall energy assimilation efficiency (63% and 58%, respectively). It was concluded that the crustacean-dominated diet of the birds is processed at its highest rate and efficiency throughout a season. It appears that without a qualitative shift in diet, no increase in intake rate is possible. Accepting these findings at their face value poses the question of how and over what time period the eastern curlews store the nutrients necessary for the ensuing long, northward nonstop flight.

Reducing the time period of steady state does not affect the accuracy of energy expenditure measurements by indirect calorimetry

Achievement of steady state during indirect calorimetry measurements of resting energy expenditure (REE) is necessary to reduce error and ensure accuracy in the measurement. Steady state is often defined as 5 consecutive min (5-min SS) during which oxygen consumption and carbon dioxide production vary by +/-10%. These criteria, however, are stringent and often difficult to satisfy. This study aimed to assess whether reducing the time period for steady state (4-min SS or 3-min SS) produced measurements of REE that were significantly different from 5-min SS. REE was measured with the use of open-circuit indirect calorimetry in 39 subjects, of whom only 21 (54%) met the 5-min SS criteria. In these 21 subjects, median biases in REE between 5-min SS and 4-min SS and between 5-min SS and 3-min SS were 0.1 and 0.01%, respectively. For individuals, 4-min SS measured REE within a clinically acceptable range of +/-2% of 5-min SS, whereas 3-min SS measured REE within a range of -2-3% of 5-min SS. Harris-Benedict prediction equations estimated REE for individuals within +/-20-30% of 5-min SS. Reducing the time period of steady state to 4 min produced measurements of REE for individuals that were within clinically acceptable, predetermined limits. The limits of agreement for 3-min SS fell outside the predefined limits of +/-2%; however, both 4-min SS and 3-min SS criteria greatly increased the proportion of subjects who satisfied steady state within smaller limits than would be achieved if relying on prediction equations.