Testate amoebae (thecamoebians) as indicators of aquatic mine impact

The environmental impacts of a single mine often remain local, but acidic and metal-rich acid mine drainage (AMD) from the waste materials may pose a serious threat to adjacent surface waters and their ecosystems. Testate amoebae (thecamoebian) analysis was used together with lake sediment geochemistry to study and evaluate the ecological effects of sulphidic metal mines on aquatic environments. Three different mines were included in the study: Luikonlahti Cu-mine in Kaavi, eastern Finland, Haveri Cu-Au mine in Ylöjärvi, southern Finland and Pyhäsalmi Zn-Cu-S mine in Pyhäjärvi, central Finland. Luikonlahti and Haveri are closed mines, but Pyhäsalmi is still operating. The sampling strategy was case specific, and planned to provide a representative sediment sample series to define natural background conditions, to detect spatial and temporal variations in mine impacts, to evaluate the possible recovery after the peak contamination, and to distinguish the effects of other environmental factors from the mining impacts. In the Haveri case, diatom analyses were performed alongside thecamoebian analysis to evaluate the similarities and differences between the two proxies. The results of the analyses were investigated with multivariate methods (direct and indirect ordinations, diversity and distance measure indices). Finally, the results of each case study were harmonized, pooled, and jointly analyzed to summarize the results for this dissertation. Geochemical results showed broadly similar temporal patterns in each case. Concentrations of ions in the pre-disturbance samples defined the natural baseline against which other results were compared. The beginning of the mining activities had only minor impacts on sediment geochemistry, mainly appearing as an increased clastic input into the lakes at Haveri and Pyhäsalmi. The active mining phase was followed by the metallic contamination and, subsequently, by the most recent change towards decreased but still elevated metal concentrations in the sediments. Because of the delay in the oxidation of waste material and formation of AMD, the most intense, but transient metal contamination phase occurred in the post-mining period at Luikonlahti and Haveri. At Pyhäsalmi, the highest metal contamination preceded effluent mitigation actions. Spatial gradients were observed besides the temporal evolution in both the pre-disturbance and mine-impacted samples from Luikonlahti and Pyhäsalmi. The geochemical gradients varied with distance from the main source of contaminants (dispersion and dilution) and with water depth (redox and pH). The spatial extent of the highest metal contamination associated with these mines remained rather limited. At Haveri, the metallic impact was widespread, with the upstream site in another lake basin found to be contaminated. Changes in thecamoebian assemblages corresponded well with the geochemical results. Despite some differences, the general features and ecological responses of the faunal assemblages were rather similar in each lake. Constantly abundant strains of Difflugia oblonga, Difflugia protaeiformis and centropyxids formed the core of these assemblages. Increasing proportions of Cucurbitella tricuspis towards the surface samples were found in all of the cases. The results affirmed the indicator value of some already known indicator forms, but such as C. tricuspis and higher nutrient levels, but also elicited possible new ones such as D. oblonga ‘spinosa’ and clayey substrate, high conductivity and/or alkalinity, D. protaeiformis ‘multicornis’ and pH, water hardness and the amount of clastic material and Centropyxis constricta ‘aerophila’ and high metal and S concentrations. In each case, eutrophication appeared to be the most important environmental factor, masking the effects of other variables. Faunal responses to high metal inputs in sediments remained minor, but were nevertheless detectable. Besides the trophic state of the lake, numerical methods suggested overall geochemical conditions (pH, redox) to be the most important factor at Luikonlahti, whereas the Haveri results showed the clearest connection between metals and amoebae. At Pyhäsalmi, the strongest relationships were found between Ca- and S-rich present loading, redox conditions and substrate composition. Sediment geochemistry and testate amoeba analysis proved to be a suitable combination of methods to detect and describe the aquatic mine impacts in each specific case, to evaluate recovery and to differentiate between the effects of different anthropogenic and natural environmental factors. It was also suggested that aquatic mine impacts can be significantly mitigated by careful design and after-care of the waste facilities, especially by reducing and preventing AMD. The case-specific approach is nevertheless necessary because of the unique characteristics of each mine and variations in the environmental background conditions.

Practical Framework for Monitoring the Performance of Agile IT Projects in an Output-Based Outsourcing Context

Over the past decade, organizations worldwide have begun to widely adopt agile software development practices, which offer greater flexibility to frequently changing business requirements, better cost effectiveness due to minimization of waste, faster time-to-market, and closer collaboration between business and IT. At the same time, IT services are continuing to be increasingly outsourced to third parties providing the organizations with the ability to focus on their core capabilities as well as to take advantage of better demand scalability, access to specialized skills, and cost benefits. An output-based pricing model, where the customers pay directly for the functionality that was delivered rather than the effort spent, is quickly becoming a new trend in IT outsourcing allowing to transfer the risk away from the customer while at the same time offering much better incentives for the supplier to optimize processes and improve efficiency, and consequently producing a true win-win outcome. Despite the widespread adoption of both agile practices and output-based outsourcing, there is little formal research available on how the two can be effectively combined in practice. Moreover, little practical guidance exists on how companies can measure the performance of their agile projects, which are being delivered in an output-based outsourced environment. This research attempted to shed light on this issue by developing a practical project monitoring framework which may be readily applied by organizations to monitor the performance of agile projects in an output-based outsourcing context, thus taking advantage of the combined benefits of such an arrangement Modified from action research approach, this research was divided into two cycles, each consisting of the Identification, Analysis, Verification, and Conclusion phases. During Cycle 1, a list of six Key Performance Indicators (KPIs) was proposed and accepted by the professionals in the studied multinational organization, which formed the core of the proposed framework and answered the first research sub-question of what needs to be measured. In Cycle 2, a more in-depth analysis was provided for each of the suggested Key Performance Indicators including the techniques for capturing, calculating, and evaluating the information provided by each KPI. In the course of Cycle 2, the second research sub-question was answered, clarifying how the data for each KPI needed to be measured, interpreted, and acted upon. Consequently, after two incremental research cycles, the primary research question was answered describing the practical framework that may be used for monitoring the performance of agile IT projects delivered in an output-based outsourcing context. This framework was evaluated by the professionals within the context of the studied organization and received positive feedback across all four evaluation criteria set forth in this research, including the low overhead of data collection, high value of provided information, ease of understandability of the metric dashboard, and high generalizability of the proposed framework.

Key performance indicators for successful metadata governance

Metadata in increasing levels of sophistication has been the most powerful concept used in management of unstructured information ever since the first librarian used the Dewey decimal system for library classifications. It remains to be seen, however, what the best approach is to implementing metadata to manage huge volumes of unstructured information in a large organization. Also, once implemented, how is it possible to track whether it is adding value to the company, and whether the implementation has been successful? Existing literature on metadata seems to either focus too much on technical and quality aspects or describe issues with respect to adoption for general information management initiatives. This research therefore, strives to contribute to these gaps: to give a consolidated framework for striving to understand the value added by implementing metadata. The basic methodology used is that of case study, which incorporates aspects of design science, surveys, and interviews in order to provide a holistic approach to quantitative and qualitative analysis of the case. The research identifies the various approaches to implementing metadata, particularly studying the one followed by the unit of analysis of case study, a large company in the Oil and Gas Sector. Of the three approaches identified, the selected company already follows an approach that appears to be superior. The researcher further explores its shortcomings, and proposes a slightly modified approach that can handle them. The research categorically and thoroughly (in context) identifies the top effectiveness criteria, and corresponding key performance indicators(KPIs) that can be measured to understand the level of advancement of the metadata management initiative in the company. In an effort to contrast and have a basis of comparison for the findings, the research also includes views from information managers dealing with core structured data stored in ERPs and other databases. In addition, the results include the basic criteria that can be used to evaluate metrics, in order to classify a metric as a KPI.

An Overview of the Cleantech Sector - Evaluating Environmental Indicators

The purpose of the thesis is to give an overview of the cleantech sector and to give an answer how cleantech companies can evaluate the environmental sustainability of their business by utilizing various indicators and measures. The thesis is a literature study and it is based on a secondary data. Thesis presents the definitions to cleantech as well as its history and the main industries. Cleantech market overview in Finland and worldwide is also introduced. Furthermore, various indicators are presented in order to evaluate the environmental sustainability of companies' business. In the end, indicators used in cleantech sector are evaluated. As a result, the thesis presents the following methodologies that can be used in evaluating the environmental sustainability in the cleantech sector: Sustainability assessment framework, Environmental value analysis, COMPLIMENT - Environmental performance index for industries and Environmental assessment for cleaner production. More tools are still needed to evaluate environmental sustainability in the cleantech sector.

Internal quality control indicators of cervical cytopathology exams performed in laboratories monitored by the External Quality Control Laboratory

PURPOSE: To evaluate the impact of continued education provided by an external quality control laboratory on the indicators of internal quality control of cytopathology exams.METHODS: The internal quality assurance indicators for cytopathology exams from 12 laboratories monitored by the External Quality Control Laboratory were evaluated. Overall, 185,194 exams were included, 98,133 of which referred to the period preceding implementation of a continued education program, while 87,061 referred to the period following this intervention. Data were obtained from the Cervical Cancer Database of the Brazilian National Health Service.RESULTS: Following implementation of the continued education program, the positivity index (PI) remained within recommended limits in four laboratories. In another four laboratories, the PI progressed from below the limits to within the recommended standards. In one laboratory, the PI remained low, in two laboratories, it remained very low, and in one, it increased from very low to low. The percentage of exams compatible with a high-grade squamous intraepithelial lesion (HSIL) remained within the recommended limits in five laboratories, while in three laboratories it progressed from below the recommended levels to >0.4% of the total number of satisfactory exams, and in four laboratories it remained below the standard limit. Both the percentage of atypical squamous cells of undetermined significance (ASC-US) in relation to abnormal exams, and the ratio between ASC-US and intraepithelial lesions remained within recommended levels in all the laboratories investigated.CONCLUSION: An improvement was found in the indicators represented by the positivity index and the percentage of exams compatible with a high-grade squamous intraepithelial lesion, showing that the role played by the external quality control laboratory in providing continued education contributed towards improving laboratory staff skills in detecting cervical cancer precursor lesions.

Quality Indicators of Cervical Cytopathology Tests in the Public Service in Minas Gerais, Brazil

Objective The objective of this study is to assess the performance of cytopathology laboratories providing services to the Brazilian Unified Health System (Sistema Único de Saúde - SUS) in the State of Minas Gerais, Brazil. Methods This descriptive study uses data obtained from the Cervical Cancer Information System from January to December 2012. Three quality indicators were analyzed to assess the quality of cervical cytopathology tests: positivity index, percentage of atypical squamous cells (ASCs) in abnormal tests, and percentage of tests compatiblewith high-grade squamous intraepithelial lesions (HSILs). Laboratories were classified according to their production scale in tests per year≤5,000; from 5,001 to 10,000; from 10,001 to 15,000; and 15,001. Based on the collection of variables and the classification of laboratories according to production scale, we created and analyzed a database using Microsoft Office Excel 97-2003. Results In the Brazilian state of Minas Gerais, 146 laboratories provided services to the SUS in 2012 by performing a total of 1,277,018 cervical cytopathology tests. Half of these laboratories had production scales≤5,000 tests/year and accounted for 13.1% of all tests performed in the entire state; in turn, 13.7% of these laboratories presented production scales of > 15,001 tests/year and accounted for 49.2% of the total of tests performed in the entire state. The positivity indexes of most laboratories providing services to the SUS in 2012, regardless of production scale, were below or well below recommended limits. Of the 20 laboratories that performed more than 15,001 tests per year, only three presented percentages of tests compatible with HSILs above the lower limit recommended by the Brazilian Ministry of Health. Conclusion The majority of laboratories providing services to the SUS in Minas Gerais presented quality indicators outside the range recommended by the Brazilian Ministry of Health.

The energy efficiency of chilled beam systems in an office building at different climates

Besides the sustaining of healthy and comfortable indoor climate, the air conditioning system should also achieve for energy efficiency. The target indoor climate can be ob-tained with different systems; this study focuses on comparing the energy efficiency of different air conditioning room unit systems in different climates. The calculations are made with dynamic energy simulation software IDA ICE by comparing the indoor cli-mate and energy consumption of an office building with different systems in different climates. The aim of the study is to compare the energy efficiency of chilled beam systems to other common systems: variable air volume, fan coil and radiant ceiling systems. Besides the annual energy consumption also the sustainability of target indoor climate is compared between the simulations. Another aim is to provide conclusions to be used in the product development of the chilled beam systems’ energy efficiency. The adaptable chilled beam system and the radiant ceiling system prove to be energy efficient independent of the climate. The challenge of reliable comparison is that other systems are not able to reach the target indoor climate as well as the others. The complex calculation environment of the simulation software, made assumptions and excluding of the financial aspects complicate comparing the big picture. The results show that the development of the chilled beam systems should concentrate on energy efficient night heating, flexible demand based ventilation and capacity control and possibilities on integrating the best practices with other systems. 

Skill Development in Music Reading. The Eye-Movement Approach

This dissertation examined skill development in music reading by focusing on the visual processing of music notation in different music-reading tasks. Each of the three experiments of this dissertation addressed one of the three types of music reading: (i) sight-reading, i.e. reading and performing completely unknown music, (ii) rehearsed reading, during which the performer is already familiar with the music being played, and (iii) silent reading with no performance requirements. The use of the eye-tracking methodology allowed the recording of the readers’ eye movements from the time of music reading with extreme precision. Due to the lack of coherence in the smallish amount of prior studies on eye movements in music reading, the dissertation also had a heavy methodological emphasis. The present dissertation thus aimed to promote two major issues: (1) it investigated the eye-movement indicators of skill and skill development in sight-reading, rehearsed reading and silent reading, and (2) developed and tested suitable methods that can be used by future studies on the topic. Experiment I focused on the eye-movement behaviour of adults during their first steps of learning to read music notation. The longitudinal experiment spanned a nine-month long music-training period, during which 49 participants (university students taking part in a compulsory music course) sight-read and performed a series of simple melodies in three measurement sessions. Participants with no musical background were entitled as “novices”, whereas “amateurs” had had musical training prior to the experiment. The main issue of interest was the changes in the novices’ eye movements and performances across the measurements while the amateurs offered a point of reference for the assessment of the novices’ development. The experiment showed that the novices tended to sight-read in a more stepwise fashion than the amateurs, the latter group manifesting more back-and-forth eye movements. The novices’ skill development was reflected by the faster identification of note symbols involved in larger melodic intervals. Across the measurements, the novices also began to show sensitivity to the melodies’ metrical structure, which the amateurs demonstrated from the very beginning. The stimulus melodies consisted of quarter notes, making the effects of meter and larger melodic intervals distinguishable from effects caused by, say, different rhythmic patterns. Experiment II explored the eye movements of 40 experienced musicians (music education students and music performance students) during temporally controlled rehearsed reading. This cross-sectional experiment focused on the eye-movement effects of one-bar-long melodic alterations placed within a familiar melody. The synchronizing of the performance and eye-movement recordings enabled the investigation of the eye-hand span, i.e., the temporal gap between a performed note and the point of gaze. The eye-hand span was typically found to remain around one second. Music performance students demonstrated increased professing efficiency by their shorter average fixation durations as well as in the two examined eye-hand span measures: these participants used larger eye-hand spans more frequently and inspected more of the musical score during the performance of one metrical beat than students of music education. Although all participants produced performances almost indistinguishable in terms of their auditory characteristics, the altered bars indeed affected the reading of the score: the general effects of expertise in terms of the two eye- hand span measures, demonstrated by the music performance students, disappeared in the face of the melodic alterations. Experiment III was a longitudinal experiment designed to examine the differences between adult novice and amateur musicians’ silent reading of music notation, as well as the changes the 49 participants manifested during a nine-month long music course. From a methodological perspective, an opening to research on eye movements in music reading was the inclusion of a verbal protocol in the research design: after viewing the musical image, the readers were asked to describe what they had seen. A two-way categorization for verbal descriptions was developed in order to assess the quality of extracted musical information. More extensive musical background was related to shorter average fixation duration, more linear scanning of the musical image, and more sophisticated verbal descriptions of the music in question. No apparent effects of skill development were observed for the novice music readers alone, but all participants improved their verbal descriptions towards the last measurement. Apart from the background-related differences between groups of participants, combining verbal and eye-movement data in a cluster analysis identified three styles of silent reading. The finding demonstrated individual differences in how the freely defined silent-reading task was approached. This dissertation is among the first presentations of a series of experiments systematically addressing the visual processing of music notation in various types of music-reading tasks and focusing especially on the eye-movement indicators of developing music-reading skill. Overall, the experiments demonstrate that the music-reading processes are affected not only by “top-down” factors, such as musical background, but also by the “bottom-up” effects of specific features of music notation, such as pitch heights, metrical division, rhythmic patterns and unexpected melodic events. From a methodological perspective, the experiments emphasize the importance of systematic stimulus design, temporal control during performance tasks, and the development of complementary methods, for easing the interpretation of the eye-movement data. To conclude, this dissertation suggests that advances in comprehending the cognitive aspects of music reading, the nature of expertise in this musical task, and the development of educational tools can be attained through the systematic application of the eye-tracking methodology also in this specific domain.

Alueellinen energiatehokkuusmalli

Energian kulutus ja siitä aiheutuvat haittavaikutukset lisääntyvät globaalisti, minkä johdosta tarve uusille toimintamalleille ja ajatustavoille on merkittävä. Yksi mahdollisuus vastata energian kulutuksen kasvuun on lisätä energiatehokkuutta. Energiatehokkuudella voidaan vähentää energian käytöstä aiheutuvia päästöjä kustannustehokkaasti. Tässä työssä tarkastellaan energiatehokkuutta ja sen lisäämistä alueellisella tasolla. Työssä käsitellään menetelmiä ja keinoja alueellisen energiatehokkuuden lisäämiseksi esimerkiksi kaupungeissa ja yhteisöissä. Työssä esitetään alueellisen energiatehokkuuden arviointimalli, jolla voidaan määrittää alueellisen energiatehokkuuden toteutumista ja energiaratkaisujen kannattavuutta ympäristön kannalta. Malli sisältää matemaattisesti määritettäviä tunnuslukuja, jotka kuvaavat ympäristövaikutuksia. Mallia sovelletaan Lohjan alue-tarkasteluun, jossa mallin pohjalta esitetään vaihtoehtoja energiatehokkuuden lisäämiseksi. Voidaan todeta, että arviointimalli on käyttökelpoinen ja sillä voidaan havainnol-listaa alueellista energian käyttöä ja sen energiatehokkuutta. On kuitenkin huomattava, että malli huomioi lähinnä vain ympäristövaikutuksia ja sisältää virheläh-teitä johtuen esimerkiksi käytettävissä olevan tiedon määrästä.

Energy Efficiency of a Diesel-Electric MobileWorking Machine

The power demand of many mobile working machines such as mine loaders, straddle carriers and harvesters varies significantly during operation, and typically, the average power demand of a working machine is considerably lower than the demand for maximum power. Consequently, for most of the time, the diesel engine of a working machine operates at a poor efficiency far from its optimum efficiency range. However, the energy efficiency of dieseldriven working machines can be improved by electric hybridization. This way, the diesel engine can be dimensioned to operate within its optimum efficiency range, and the electric drive with its energy storages responds to changes in machine loading. A hybrid working machine can be implemented in many ways either as a parallel hybrid, a series hybrid or a combination of these two. The energy efficiency of hybrid working machines can be further enhanced by energy recovery and reuse. This doctoral thesis introduces the component models required in the simulation model of a working machine. Component efficiency maps are applied to the modelling; the efficiency maps for electrical machines are determined analytically in the whole torque–rotational speed plane based on the electricalmachine parameters. Furthermore, the thesis provides simulation models for parallel, series and parallel-series hybrid working machines. With these simulation models, the energy consumption of the working machine can be analysed. In addition, the hybridization process is introduced and described. The thesis provides a case example of the hybridization and dimensioning process of a working machine, starting from the work cycle of the machine. The selection and dimensioning of the hybrid system have a significant impact on the energy consumption of a hybrid working machine. The thesis compares the energy consumption of a working machine implemented by three different hybrid systems (parallel, series and parallel-series) and with different component dimensions. The payback time of a hybrid working machine and the energy storage lifetime are also estimated in the study.

Energy Efficiency Consideration in Electric Vehicle Transmission

This study is a survey of benefits and drawbacks of embedding a variable gearbox instead of a single reduction gear in electric vehicle powertrain from efficiency point of view. Losses due to a pair of spur gears meshing with involute teeth are modeled on the base of Coulomb’s law and fluid mechanics. The model for a variable gearbox is fulfilled and further employed in a complete vehicle simulation. Simulation model run for a single reduction gear then the results are taken as benchmark for other types of commonly used transmissions. Comparing power consumption, which is obtained from simulation model, shows that the extra load imposed by variable transmission components will shade the benefits of efficient operation of electric motor. The other accomplishment of this study is a combination of modified formulas that led to a new methodology for power loss prediction in gear meshing which is compatible with modern design and manufacturing technology.

The Anchoring Bias of Investors and the 52-Week High Momentum Strategy in the OMX Helsinki Stock Exchange: Psychological Approach to Market Efficiency

The behavioural finance literature expects systematic and significant deviations from efficiency to persist in securities markets due to behavioural and cognitive biases of investors. These behavioural models attempt to explain the coexistence of intermediate-term momentum and long-term reversals in stock returns based on the systematic violations of rational behaviour of investors. The study investigates the anchoring bias of investors and the profitability of the 52-week momentum strategy (GH henceforward). The relatively highly volatile OMX Helsinki stock exchange is a suitable market for examining the momentum effect, since international investors tend to realise their positions first from the furthest security markets by the time of market turbulence. Empirical data is collected from Thomson Reuters Datastream and the OMX Nordic website. The objective of the study is to provide a throughout research by formulating a self-financing GH momentum portfolio. First, the seasonality of the strategy is examined by taking the January effect into account and researching abnormal returns in long-term. The results indicate that the GH strategy is subject to significantly negative revenues in January, but the strategy is not prone to reversals in long-term. Then the predictive proxies of momentum returns are investigated in terms of acquisition prices and 52-week high statistics as anchors. The results show that the acquisition prices do not have explanatory power over the GH strategy’s abnormal returns. Finally, the efficacy of the GH strategy is examined after taking transaction costs into account, finding that the robust abnormal returns remain statistically significant despite the transaction costs. As a conclusion, the relative distance between a stock’s current price and its 52-week high statistic explains the profits of momentum investing to a high degree. The results indicate that intermediateterm momentum and long-term reversals are separate phenomena. This presents a challenge to current behavioural theories, which model these aspects of stock returns as subsequent components of how securities markets respond to relevant information.

Waste-to-Energy Scenarios in the China Context

Waste incineration plants are increasingly established in China. A low heating value and high moisture content, due to a large proportion of biowaste in the municipal solid waste (MSW), can be regarded as typical characteristics of Chinese MSW. Two incineration technologies have been mainly established in China: stoker grate and circular fluidized bed (CFB). Both of them are designed to incinerate mixed MSW. However, there have been difficulties to reach the sufficient temperature in the combustion process due to the low heating value of the MSW. That is contributed to the usage of an auxiliary fossil fuel, which is often used during the whole incineration process. The objective of this study was to design alternative Waste-to-energy (WTE) scenarios for existing WTE plants with the aim to improve the material and energy efficiency as well as the feasibility of the plants. Moreover, the aim of this thesis was to find the key factors that affect to the feasibility of the scenarios. Five different WTE plants were selected as study targets. The necessary data for calculation was gained from literature as well as received from the operators of the target WTE plants. The created scenarios were based on mechanical-biological treatment (MBT) technologies, in which the produced solid recovered fuel (SRF) was fed as an auxiliary fuel into a WTE plant replacing the fossil fuel. The mechanically separated biowaste was treated either in an anaerobic digestion (AD) plant, a biodrying plant, a thermal drying plant, or a combined AD plant + thermal drying plant. An interactive excel spreadsheet based computation tool was designed to estimate the viability of the scenarios in different WTE cases. The key figures of the improved material and energy efficiency, such as additional electricity generated and avoided waste for landfill, were got as results. Furthermore, economic indicators such as annual profits (or costs), payback period, and internal rate of return (IRR) were gained as results. The results show that the AD scenario was the most profitable in most of the cases. The current heating value of MSW and the tipping fee for the received MSW appeared as the most important factor in terms of feasibility.