Using Fiber Bragg Grating (FBG) sensors to measure vertical displacements of bridges : a preliminary study

In many bridges, vertical displacements are the most relevant parameter for monitoring in the both short and long term. However, it is difficult to measure vertical displacements of bridges and yet they are among the most important indicators of structural behaviour. Therefore, it prompts a need to develop a simple, inexpensive and yet more practical method to measure vertical displacements of bridges. With the development of fiber-optics technologies, fiber Bragg grating (FBG) sensors have been widely used in structural health monitoring. The advantages of these sensors over the conventional sensors include multiplexing capabilities, high sample rate, small size and electro magnetic interference (EMI) immunity. In this paper, methods of vertical displacement measurements of bridges are first reviewed. Then, FBG technology is briefly introduced including principle, sensing system, characteristics and different types of FBG sensors. Finally, the methodology of vertical displacement measurements using FBG sensors is presented and a trial test is described. It is concluded that using FBG sensors is feasible to measure vertical displacements of bridges. This method can be used to understand global behaviour of bridge‘s span and can further develop for structural health monitoring techniques such as damage detection.

Synthesis and characterisation of hybrid gold/polymer nanoparticles for bioassay application

A bioassay technique, based on surface-enhanced Raman scattering (SERS) tagged gold nanoparticles encapsulated with a biotin functionalised polymer, has been demonstrated through the spectroscopic detection of a streptavidin binding event. A methodical series of steps preceded these results: synthesis of nanoparticles which were found to give a reproducible SERS signal; design and synthesis of polymers with RAFT-functional end groups able to encapsulate the gold nanoparticle. The polymer also enabled the attachment of a biotin molecule functionalised so that it could be attached to the hybrid nanoparticle through a modular process. Finally, the demonstrations of a positive bioassay for this model construct using streptavidin/biotin binding. The synthesis of silver and gold nanoparticles was performed by using tri-sodium citrate as the reducing agent. The shape of the silver nanoparticles was quite difficult to control. Gold nanoparticles were able to be prepared in more regular shapes (spherical) and therefore gave a more consistent and reproducible SERS signal. The synthesis of gold nanoparticles with a diameter of 30 nm was the most reproducible and these were also stable over the longest periods of time. From the SERS results the optimal size of gold nanoparticles was found to be approximately 30 nm. Obtaining a consistent SERS signal with nanoparticles smaller than this was particularly difficult. Nanoparticles more than 50 nm in diameter were too large to remain suspended for longer than a day or two and formed a precipitate, rendering the solutions useless for our desired application. Gold nanoparticles dispersed in water were able to be stabilised by the addition of as-synthesised polymers dissolved in a water miscible solvent. Polymer stabilised AuNPs could not be formed from polymers synthesised by conventional free radical polymerization, i.e. polymers that did not possess a sulphur containing end-group. This indicated that the sulphur-containing functionality present within the polymers was essential for the self assembly process to occur. Polymer stabilization of the gold colloid was evidenced by a range of techniques including, visible spectroscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis and Raman spectroscopy. After treatment of the hybrid nanoparticles with a series of SERS tags, focussing on 2-quinolinethiol the SERS signals were found to have comparable signal intensity to the citrate stabilised gold nanoparticles. This finding illustrates that the stabilization process does not interfere with the ability of gold nanoparticles to act as substrates for the SERS effect. Incorporation of a biotin moiety into the hybrid nanoparticles was achieved through a =click‘ reaction between an alkyne-functionalised polymer and an azido-functionalised biotin analogue. This functionalized biotin was prepared through a 4-step synthesis from biotin. Upon exposure of the surface-bound streptavidin to biotin-functionalised polymer hybrid gold nanoparticles, then washing, a SERS signal was obtained from the 2-quinolinethiol which was attached to the gold nanoparticles (positive assay). After exposure to functionalised polymer hybrid gold nanoparticles without biotin present then washing a SERS signal was not obtained as the nanoparticles did not bind to the streptavidin (negative assay). These results illustrate the applicability of the use of SERS active functional-polymer encapsulated gold nanoparticles for bioassay application.

A qualitative study of older adults’ responses to sitting-time questions : do we get the information we want?

Background: In the last decade, there has been increasing interest in the health effects of sedentary behavior, which is often assessed using self-report sitting-time questions. The aim of this qualitative study was to document older adults’ understanding of sitting-time questions from the International Physical Activity (PA) Questionnaire (IPAQ) and the PA Scale for the Elderly (PASE). Methods: Australian community-dwelling adults aged 65+ years answered the IPAQ and PASE sitting questions in face-to-face semi-structured interviews. IPAQ uses one open-ended question to assess sitting on a weekday in the last 7 days 'at work, at home, while doing coursework and during leisure time'; PASE uses a three-part closed question about daily leisure-time sitting in the last 7 days. Participants expressed their thoughts out loud while answering each question. They were then probed about their responses. Interviews were recorded, transcribed and coded into themes. Results: Mean age of the 28 male and 27 female participants was 73 years (range 65-89). The most frequently reported activity was watching TV. For both questionnaires, many participants had difficulties understanding what activities to report. Some had difficulty understanding what activities should be classified as ‘leisure-time sitting’. Some assumed they were being asked to only report activities provided as examples. Most reported activities they normally do, rather than those performed on a day in the previous week. Participants used a variety of strategies to select ‘a day’ for which they reported their sitting activities and to calculate sitting time on that day. Therefore, many different ways of estimating sitting time were used. Participants had particular difficulty reporting their daily sitting-time when their schedules were not consistent across days. Some participants declared the IPAQ sitting question too difficult to answer. Conclusion: The accuracy of older adults’ self-reported sitting time is questionable given the challenges they have in answering sitting-time questions. Their responses to sitting-time questions may be more accurate if our recommendations for clarifying the sitting domains, providing examples relevant to older adults and suggesting strategies for formulating responses are incorporated. Future quantitative studies should include objective criterion measures to assess validity and reliability of these questions.

The sun gives without ever receiving

YEAR: 2010 ROLE: Artist FORMAT: Miniature 3D Sculpture produced in resin using 3D printing technologies. WITH: International Touring Show ‘Inside Out’ WHAT: A miniature sculpture that contributes towards my ongoing explorations into how our collective ability to sustain (the future) is as much a cultural problematic as it is an economic or technological one. OVERVIEW: The curatorial brief was for each curated artist was to design a piece in CAD suitable for 3D resin printing - The object should be entirely generated through 3D visualisation and modelling tools and should be machined and shipped within the dimensions of 6cm x 6cm x 6cm. My design for this brief was influenced by recent research I had conducted in Mildura in the Sunraysia irrigated region of NW Victoria. Each name set within the work is an Australian soldier/settler – who, on returning from the ‘Great War’ was duly awarded a ‘block’ in Australia’s new inland irrigated settlements - with the explicit task of clearing it to plant and reap. Through their concerted and well-intentioned efforts, these workers began to profoundly re-shape Australia’s marginal country - inadvertently presaging the bleak future faced today by many of Australia’s inland lands and river systems. Furthermore, through that time's predominant colonial conception of ‘terra nullius’ (this land is unoccupied and therefore free to be claimed) they each played a small but formative part in building the profound cultural divide between land and peoples that still haunts Australia today. THE EXHIBITION: Inside Out is a compelling international touring exhibition featuring forty-six miniature sculptures produced in resin using 3D printing technologies. Developments in virtual computer visualisation and integrated digital technologies are giving contemporary makers new insight and opportunities to create objects and forms which were previously impossible to produce or difficult to envisage. The exhibition is the result of collaboration between the Art Technology Coalition, the University of Technology Sydney and RMIT University in Australia along with De Montfort University, Manchester Metropolitan University and Dartington College of Arts at University College Falmouth in the United Kingdom.

The 'nurdle to leg' and other ways of winning cricket matches

The emergence of Twenty20 cricket at the elite level has been marketed on the excitement of the big hitter, where it seems that winning is a result of the muscular batter hitting boundaries at will. This version of the game has captured the imagination of many young players who all want to score runs with “big hits”. However, in junior cricket, boundary hitting is often more difficult due to size limitations of children and games played on outfields where the ball does not travel quickly. As a result, winning is often achieved via a less spectacular route – by scoring more singles than your opponents. However, most standard coaching texts only describe how to play boundary scoring shots (e.g. the drives, pulls, cuts and sweeps) and defensive shots to protect the wicket. Learning to bat appears to have been reduced to extremes of force production, i.e. maximal force production to hit boundaries or minimal force production to stop the ball from hitting the wicket. Initially, this is not a problem because the typical innings of a young player (<12 years) would be based on the concept of “block” or “bash” – they “block” the good balls and “bash” the short balls. This approach works because there are many opportunities to hit boundaries off the numerous inaccurate deliveries of novice bowlers. Most runs are scored behind the wicket by using the pace of the bowler’s delivery to re-direct the ball, because the intrinsic dynamics (i.e. lack of strength) of most children means that they can only create sufficient power by playing shots where the whole body can contribute to force production. This method works well until the novice player comes up against more accurate bowling when they find they have no way of scoring runs. Once batters begin to face “good” bowlers, batters have to learn to score runs via singles. In cricket coaching manuals (e.g. ECB, n.d), running between the wickets is treated as a separate task to batting, and the “basics” of running, such as how to “back- up”, carry the bat, calling and turning and sliding the bat into the crease are “drilled” into players. This task decomposition strategy focussing on techniques is a common approach to skill acquisition in many highly traditional sports, typified in cricket by activities where players hit balls off tees and receive “throw-downs” from coaches. However, the relative usefulness of these approaches in the acquisition of sporting skills is increasingly being questioned (Pinder, Renshaw & Davids, 2009). We will discuss why this is the case in the next section.

Defending web services against denial of service attacks using client puzzles

The interoperable and loosely-coupled web services architecture, while beneficial, can be resource-intensive, and is thus susceptible to denial of service (DoS) attacks in which an attacker can use a relatively insignificant amount of resources to exhaust the computational resources of a web service. We investigate the effectiveness of defending web services from DoS attacks using client puzzles, a cryptographic countermeasure which provides a form of gradual authentication by requiring the client to solve some computationally difficult problems before access is granted. In particular, we describe a mechanism for integrating a hash-based puzzle into existing web services frameworks and analyze the effectiveness of the countermeasure using a variety of scenarios on a network testbed. Client puzzles are an effective defence against flooding attacks. They can also mitigate certain types of semantic-based attacks, although they may not be the optimal solution.

Home literacy education of Taiwanese Australian families : a sociological analysis

This research investigates home literacy education practices of Taiwanese families in Australia. As Taiwanese immigrants represent the largest ¡°Chinese Australian¡± subgroup to have settled in the state of Queensland, teachers in this state often face the challenges of cultural differences between Australian schools and Taiwanese homes. Extensive work by previous researchers suggests that understanding the cultural and linguistic differences that influence how an immigrant child views and interacts with his/her environment is a possible way to minimise the challenges. Cultural practices start from infancy and at home. Therefore, this study is focused on young children who are around the age of four to five. It is a study that examines the form of literacy education that is enacted and valued by Taiwanese parents in Australia. Specifically, this study analyses ¡°what literacy knowledge and skill is taught at home?¡±, ¡°how is it taught?¡± and ¡°why is it taught?¡± The study is framed in Pierre Bourdieu.s theory of social practice that defines literacy from a sociological perspective. The aim is to understand the practices through which literacy is taught in the Taiwanese homes. Practices of literacy education are culturally embedded. Accordingly, the study shows the culturally specialised ways of learning and knowing that are enacted in the study homes. The study entailed four case studies that draw on: observations and recording of the interactions between the study parent and child in their literacy events; interviews and dialogues with the parents involved; and a collection of photographs of the children.s linguistic resources and artefacts. The methodological arguments and design addressed the complexity of home literacy education where Taiwanese parents raise children in their own cultural ways while adapting to a new country in an immigrant context. In other words, the methodology not only involves cultural practices, but also involves change and continuity in home literacy practices. Bernstein.s theory of pedagogic discourse was used to undertake a detailed analysis of parents. selection and organisation of content for home literacy education, and the evaluative criteria they established for the selected literacy knowledge and skill. This analysis showed how parents selected and controlled the interactions in their child.s literacy learning. Bernstein.s theory of pedagogic discourse was used also to analyse change and continuity in home literacy practice, specifically, the concepts of ¡°classification¡± and ¡°framing¡±. The design of this study aimed to gain an understanding of parents. literacy teaching in an immigrant context. The study found that parents tended to value and enact traditional practices, yet most of the parents were also searching for innovative ideas for their adult-structured learning. Home literacy education of Taiwanese families in this study was found to be complex, multi-faceted and influenced in an ongoing way by external factors. Implications for educators and recommendations for future study are provided. The findings of this study offer early childhood teachers in Australia understandings that will help them build knowledge about home literacy education of Taiwanese Australian families.

Protection of distributed generation interfaced networks

With the rapid increase in electrical energy demand, power generation in the form of distributed generation is becoming more important. However, the connections of distributed generators (DGs) to a distribution network or a microgrid can create several protection issues. The protection of these networks using protective devices based only on current is a challenging task due to the change in fault current levels and fault current direction. The isolation of a faulted segment from such networks will be difficult if converter interfaced DGs are connected as these DGs limit their output currents during the fault. Furthermore, if DG sources are intermittent, the current sensing protective relays are difficult to set since fault current changes with time depending on the availability of DG sources. The system restoration after a fault occurs is also a challenging protection issue in a converter interfaced DG connected distribution network or a microgrid. Usually, all the DGs will be disconnected immediately after a fault in the network. The safety of personnel and equipment of the distribution network, reclosing with DGs and arc extinction are the major reasons for these DG disconnections. In this thesis, an inverse time admittance (ITA) relay is proposed to protect a distribution network or a microgrid which has several converter interfaced DG connections. The ITA relay is capable of detecting faults and isolating a faulted segment from the network, allowing unfaulted segments to operate either in grid connected or islanded mode operations. The relay does not make the tripping decision based on only the fault current. It also uses the voltage at the relay location. Therefore, the ITA relay can be used effectively in a DG connected network in which fault current level is low or fault current level changes with time. Different case studies are considered to evaluate the performance of the ITA relays in comparison to some of the existing protection schemes. The relay performance is evaluated in different types of distribution networks: radial, the IEEE 34 node test feeder and a mesh network. The results are validated through PSCAD simulations and MATLAB calculations. Several experimental tests are carried out to validate the numerical results in a laboratory test feeder by implementing the ITA relay in LabVIEW. Furthermore, a novel control strategy based on fold back current control is proposed for a converter interfaced DG to overcome the problems associated with the system restoration. The control strategy enables the self extinction of arc if the fault is a temporary arc fault. This also helps in self system restoration if DG capacity is sufficient to supply the load. The coordination with reclosers without disconnecting the DGs from the network is discussed. This results in increased reliability in the network by reduction of customer outages.

Consumers’ intentions to adopt 3G in regional cities in China : a comparative study

Rapid mobile technological evolution and the large economic stake in commercial development of mobile technological innovation make it necessary to understand consumers' motivations towards the latest advanced and updated technologies and services. 3G (the third generation of mobile communication technology) recently started its commercial development in the world‘s largest mobile communication market, China, after being delayed for a few years. Although China fell behind in commercially developing 3G, it is difficult to ignore studying this area, given the size of the market and promising future developments. This market deserves focused research attention, especially in terms of consumer behaviour towards the adoption of mobile technological innovation. Thus, the program of research in this thesis was designed to investigate how Chinese consumers respond to the use of this newly launched mobile technological innovation, with a focus on what factors affect their 3G adoption intentions. It aimed to yield important insights into Chinese consumers‘ innovation adoption behaviours and to contribute to marketing and innovation adoption research. Furthermore, it has been documented that Chinese consumers vary widely between regions in dialect, lifestyle, culture, purchasing power and consumption attitudes. Based on economic development and local culture, China can be divided geographically into distinctive regional consumer markets. Consequently, the results of consumer behaviour research in one region may not necessarily be extrapolated to other regions. In order to better understand Chinese consumers, the disparities between regions should not be overlooked. Therefore, another objective of this program of research was to examine regional variances in consumers' innovation adoption, specifically to identify the similarities and differences in factors influencing 3G adoption, contributing to intra-cultural studies. An extensive literature review identified two gaps: current China-based innovation adoption research studies are limited in providing adequate prediction and explanation of Chinese consumers' intentions to adopt 3G; and there was limited knowledge about the differences between regional Chinese consumers in innovation adoption. Two research questions therefore were developed to address these gaps: 1) What factors influence Chinese consumers' intentions to adopt 3G? 2) How do Chinese consumers differ between regional markets in the relative influence of the factors in determining their intentions to adopt 3G? In accordance with postpositivist research philosophy, two studies were designed to answer the research questions, using mixed methods. To meet the research objectives, the two studies were both conducted in three regional cities, namely Beijing, Shanghai and Wuhan, centred in the three regions of North China, East China and Central China respectively, with sufficient cultural and economical regional variances. Study One was an exploratory study with qualitative research methods. It involved 45 in-depth interviews in the three research cities to gain rich insights into the research context from natural settings. Eight important concepts related to 3G adoption were generated from analysis of the interview data, namely utilitarian expectation, hedonic expectation, status gains, status loss avoidance, normative influence, external influence, cost and quality concern. The concepts of social loss avoidance and quality concern were two unique findings, whereas the other concepts were similar to the findings in Western innovation adoption studies. Moreover, variances in 3G adoption between three groups of regional consumers were also identified, focusing on the perceptions of two concepts, namely status gains and normative influence. The conceptual research model was then developed incorporating the eight concepts plus the dependent variable of adoption intention. The hypothesized relationships between the nine constructs and hypotheses about the differences between regional consumers in 3G adoption were informed by the findings of Study One and the literature reviewed. Study Two was a quantitative study involving a web-based survey and statistical analysis procedure. The web-based survey attracted 800 residents from the three research cities, 270 from Beijing, 265 from Shanghai and 265 from Wuhan. They comprised three research samples for this study and consequently three sets of data were obtained. The data was analysed by Structural Equation Modelling together with Multi-group Analysis. The analysis confirmed that the concepts generated in Study One were influential factors affecting Chinese consumers' 3G adoption intention, with the exception of the concept external influence. Differences were found between the samples in the three research cities in the effect of hedonic expectation, status gains, status loss avoidance and normative influence on 3G adoption intention. The two Studies undertaken in this thesis contributed a better understanding of Chinese consumers' intentions to adopt advanced mobile technological innovation, namely 3G, in three regional markets. This knowledge contributes to innovation adoption and intra-cultural research, as well as consumer behaviour theory. It is also able to inform international and domestic telecommunication companies to develop and deliver more effective marketing strategies across Chinese regional markets. Limitations in the research were identified in terms of the sampling techniques used and the design of the two Studies. Future research was suggested in other Chinese regional markets and into consumer adoption of other types of mobile technological innovations.

Raman microscopy study of tyrolite : a multi-anion arsenate mineral

The Raman spectrum of tyrolite, CaCu5(AsO4)2(CO3)(OH) 4.6H2O, from Brixlegg, Tyrol, Austria, is reported. Comparison with copper hydroxy-arsenate and basic carbonates was used to achieve assignments of the observed bands. The AsO43- group is characterized by two υ4 modes around 433 and 480 cm-1 plus a broad band around 840 cm-1 as the υ overlapping with the υ. The υ3 mode is observed as a single band around 355 cm -1. The CO32- υ1 mode is observed around 1035 and 1088 cm-1, although this assignment is difficult because of the in-plane OH bending vibrations at similar frequencies. Two υ4 modes are assigned to the 717 and 755 cm-1 bands. The υ3 mode is present as three bands at 1431, 1463, and 1498 cm-1. A large split caused by bridging carbonates may explain the band at 1370 cm -1. The H2O bending region shows two bands at 1635 and 1667 cm-1 together with stretching modes around 3204 and 3303 cm-1, the first associated with adsorbed H2O, while the second indicates more strongly bonded H2O. Three bands around 3534, 3438, and 3379 cm -1 are assigned to OH stretching modes of the OH groups in the crystal structure. The 202, 262, 301, 524, and 534 cm-1 bands are assigned to Cu-OH bending and stretching modes, whereas the bands around 179, 202, and 217 cm-1 are ascribed to O-(Ca, Cu)-O(H) with the O(H) at much greater distance from the cation. The bands around 503, 570, and 598 cm-1 are ascribed to the Cu-O stretching modes.

Accommodating serendipity in the active studio

This paper presents a series of ongoing experiments to facilitate serendipity in the design studio through a diversity of delivery modes. These experiments are conducted in a second year architectural design studio, and include physical, dramatic and musical performance. The act of designing is always exploratory, always seeking an unknown resolution, and the ability to see and capture the value in the unexpected is a critical aspect of such creative design practice. Engaging with the unexpected is however a difficult ability to develop in students. Just how can a student be schooled in such abilities when the challenge and the context are unforeseeable? How can students be offered meaningful feedback about an issue that cannot be predicted, when feedback comes in the form of extrinsic assessment from a tutor? This project establishes a number of student activities that seek to provide intrinsic feedback from the activity itself. Further to this, the project seeks to heighten student engagement with the project through physical expression and performance: utilising more of the students’ senses than just vision and hearing. Diana Laurillard’s theories of conversational frameworks (2002) are used to interrogate the act of dramatic performance as an act of learning, with particular reference to the serendipitous activities of design. Such interrogation highlights the feedback mechanisms that facilitate intrinsic feedback and fast, if not instantaneous, cycles of learning. The physical act of performance itself provides a learning experience that is not replicable in other modes of delivery. Student feedback data and independent assessment of project outcomes are used to assess the success of this studio model.

Creative cities : the role of creative industries in regeneration

This paper attempts to make out a clear case for the role of creative industries in the future of our towns and cities; but it also argues that some difficult choices have to be made. Many have argued that the creative industries bring together culture and economics, but this is not the reduction of one to the other. In any respect both of these are abstractions from a complex social reality; we have to know what exactly we mean by culture and economics and how much value we place upon them. But this is also about long term and short term, about balancing one set of interests with others which may not be able to articulate themselves as strongly. It is about looking below the hype to the real processes involved

Identification of a cryptic Prokaryotic promoter within the cDNA encoding the 5′ End of Dengue Virus RNA Genome

Infectious cDNA clones of RNA viruses are important research tools, but flavivirus cDNA clones have proven difficult to assemble and propagate in bacteria. This has been attributed to genetic instability and/or host cell toxicity, however the mechanism leading to these difficulties has not been fully elucidated. Here we identify and characterize an efficient cryptic bacterial promoter in the cDNA encoding the dengue virus (DENV) 5′ UTR. Following cryptic transcription in E. coli, protein expression initiated at a conserved in-frame AUG that is downstream from the authentic DENV initiation codon, yielding a DENV polyprotein fragment that was truncated at the N-terminus. A more complete understanding of constitutive viral protein expression in E. coli might help explain the cloning and propagation difficulties generally observed with flavivirus cDNA.

Categorisation of activities of daily living of lower limb amputees during short-term use of a portable kinetic recording system : a preliminary study

The purpose of this preliminary study was to determine the relevance of the categorization of the load regime data to assess the functional output and usage of the prosthesis of lower limb amputees. The objectives were a) to introduce a categorization of load regime, b) to present some descriptors of each activity, and c) to report the results for a case. The load applied on the osseointegrated fixation of one transfemoral amputee was recorded using a portable kinetic system for 5 hours. The periods of directional locomotion, localized locomotion, and stationary loading occurred 44%, 34%, and 22% of recording time and each accounted for 51%, 38%, and 12% of the duration of the periods of activity, respectively. The absolute maximum force during directional locomotion, localized locomotion, and stationary loading was 19%, 15%, and 8% of the body weight on the anteroposterior axis, 20%, 19%, and 12% on the mediolateral axis, and 121%, 106%, and 99% on the long axis. A total of 2,783 gait cycles were recorded. Approximately 10% more gait cycles and 50% more of the total impulse than conventional analyses were identified. The proposed categorization and apparatus have the potential to complement conventional instruments, particularly for difficult cases.

Removal of toxic arsenic and antimony from groundwater Spiro Tunnel Bulkhead in Park City Utah using colloidal iron hydroxide : comparison with reverse ssmosis

Verification testing of two model technologies in pilot scale to remove arsenic and antimony based on reverse osmosis and chemical coagulation/filtration systems was conducted in Spiro Tunnel Water Filtration Plant located in Park City, Utah, US. The source water was groundwater in abandoned silver mine, naturally contaminated by 60-80 ppb of arsenic and antimony below 10 ppb. This water represents one of the sources of drinking water for Park City and constitutes about 44% of the water supply. The failure to remove antimony efficiently by coagulation/filtration (only 4.4% removal rate) under design conditions is discussed in terms of the chemistry differences between Sb (III, V) and As (III, V). Removal of Sb(V) at pH > 7, using coagulation/filtration technology, requires much higher (50 to 80 times) concentration of iron (III) than As. The stronger adsorption of arsenate over a wider pH range can be explained by the fact that arsenic acid is tri-protic, whereas antimonic acid is monoprotic. This difference in properties of As(V) and Sb(V) makes antimony (V) more difficult to be efficiently removed in low concentrations of iron hydroxide and alkaline pH waters, especially in concentration of Sb < 10 ppb.