Análise de métodos para detecção de mudanças estruturais em séries temporais climáticas

The time series analysis has played an increasingly important role in weather and climate studies. The success of these studies depends crucially on the knowledge of the quality of climate data such as, for instance, air temperature and rainfall data. For this reason, one of the main challenges for the researchers in this field is to obtain homogeneous series. A time series of climate data is considered homogeneous when the values of the observed data can change only due to climatic factors, i.e., without any interference from external non-climatic factors. Such non-climatic factors may produce undesirable effects in the time series, as unrealistic homogeneity breaks, trends and jumps. In the present work it was investigated climatic time series for the city of Natal, RN, namely air temperature and rainfall time series, for the period spanning from 1961 to 2012. The main purpose was to carry out an analysis in order to check the occurrence of homogeneity breaks or trends in the series under investigation. To this purpose, it was applied some basic statistical procedures, such as normality and independence tests. The occurrence of trends was investigated by linear regression analysis, as well as by the Spearman and Mann-Kendall tests. The homogeneity was investigated by the SNHT, as well as by the Easterling-Peterson and Mann-Whitney-Pettit tests. Analyzes with respect to normality showed divergence in their results. The von Neumann ratio test showed that in the case of the air temperature series the data are not independent and identically distributed (iid), whereas for the rainfall series the data are iid. According to the applied testings, both series display trends. The mean air temperature series displays an increasing trend, whereas the rainfall series shows an decreasing trend. Finally, the homogeneity tests revealed that all series under investigations present inhomogeneities, although they breaks depend on the applied test. In summary, the results showed that the chosen techniques may be applied in order to verify how well the studied time series are characterized. Therefore, these results should be used as a guide for further investigations about the statistical climatology of Natal or even of any other place.

Desenvolvimento e validação de testes de fluxo lateral para a detecção de cultivares geneticamente modificados e de aflatoxinas em produtos agrícolas

The expansion of cultivated areas with genetically modified crops (GM) is a worldwide phenomenon, stimulating regulatory authorities to implement strict procedures to monitor and verify the presence of GM varieties in agricultural crops. With the constant growing of plant cultivating areas all over the world, consumption of aflatoxin-contaminated food also increased. Aflatoxins correspond to a class of highly toxic contaminants found in agricultural products that can have harmful effects on human and animal health. Therefore, the safety and quality evaluation of agricultural products are important issues for consumers. Lateral flow tests (strip tests) is a promising method for the detection both proteins expressed in GM crops and aflatoxins-contaminated food samples. The advantages of this technique include its simplicity, rapidity and cost-effective when compared to the conventional methods. In this study, two novel and sensitive strip tests assay were developed for the identification of: (i) Cry1Ac and Cry8Ka5 proteins expressed in GM cotton crops and; (ii) aflatoxins from agricultural products. The first strip test was developed using a sandwhich format, while the second one was developed using a competitive format. Gold colloidal nanoparticles were used as detector reagent when coated with monoclonal antibodies. An anti-species specific antibody was sprayed at the nitrocellulose membrane to be used as a control line. To validate the first strip test, GM (Bollgard I® e Planta 50- EMBRAPA) and non-GM cotton leaf (Cooker 312) were used. The results showed that the strip containing antibodies for the identification of Cry1Ac and Cry8Ka5 proteins was capable of correctly distinguishing between GM samples (positive result) and non-GM samples (negative result), in a high sensitivity manner. To validate the second strip test, artificially contaminated soybean with Aspergillus flavus (aflatoxin-producing fungus) was employed. Food samples, such as milk and soybean, were also evaluated for the presence of aflatoxins. The strip test was capable to distinguish between samples with and without aflatoxins samples, at a sensitivity concentration of 0,5 μg/Kg. Therefore, these results suggest that the strip tests developed in this study can be a potential tool as a rapid and cost-effective method for detection of insect resistant GM crops expressing Cry1Ac and Cry8Ka5 and aflatoxins from food samples.

Desenvolvimento e validação de testes de fluxo lateral para a detecção de cultivares geneticamente modificados e de aflatoxinas em produtos agrícolas

The expansion of cultivated areas with genetically modified crops (GM) is a worldwide phenomenon, stimulating regulatory authorities to implement strict procedures to monitor and verify the presence of GM varieties in agricultural crops. With the constant growing of plant cultivating areas all over the world, consumption of aflatoxin-contaminated food also increased. Aflatoxins correspond to a class of highly toxic contaminants found in agricultural products that can have harmful effects on human and animal health. Therefore, the safety and quality evaluation of agricultural products are important issues for consumers. Lateral flow tests (strip tests) is a promising method for the detection both proteins expressed in GM crops and aflatoxins-contaminated food samples. The advantages of this technique include its simplicity, rapidity and cost-effective when compared to the conventional methods. In this study, two novel and sensitive strip tests assay were developed for the identification of: (i) Cry1Ac and Cry8Ka5 proteins expressed in GM cotton crops and; (ii) aflatoxins from agricultural products. The first strip test was developed using a sandwhich format, while the second one was developed using a competitive format. Gold colloidal nanoparticles were used as detector reagent when coated with monoclonal antibodies. An anti-species specific antibody was sprayed at the nitrocellulose membrane to be used as a control line. To validate the first strip test, GM (Bollgard I® e Planta 50- EMBRAPA) and non-GM cotton leaf (Cooker 312) were used. The results showed that the strip containing antibodies for the identification of Cry1Ac and Cry8Ka5 proteins was capable of correctly distinguishing between GM samples (positive result) and non-GM samples (negative result), in a high sensitivity manner. To validate the second strip test, artificially contaminated soybean with Aspergillus flavus (aflatoxin-producing fungus) was employed. Food samples, such as milk and soybean, were also evaluated for the presence of aflatoxins. The strip test was capable to distinguish between samples with and without aflatoxins samples, at a sensitivity concentration of 0,5 μg/Kg. Therefore, these results suggest that the strip tests developed in this study can be a potential tool as a rapid and cost-effective method for detection of insect resistant GM crops expressing Cry1Ac and Cry8Ka5 and aflatoxins from food samples.

Utilização da transformada de wavelet para detecção de variações anormais de tensão em sistemas elétricos com geração distribuída

The increasing demand in electricity and decrease forecast, increasingly, of fossil fuel reserves, as well as increasing environmental concern in the use of these have generated a concern about the quality of electricity generation, making it well welcome new investments in generation through alternative, clean and renewable sources. Distributed generation is one of the main solutions for the independent and selfsufficient generating systems, such as the sugarcane industry. This sector has grown considerably, contributing expressively in the production of electricity to the distribution networks. Faced with this situation, one of the main objectives of this study is to propose the implementation of an algorithm to detect islanding disturbances in the electrical system, characterized by situations of under- or overvoltage. The algorithm should also commonly quantize the time that the system was operating in these conditions, to check the possible consequences that will be caused in the electric power system. In order to achieve this it used the technique of wavelet multiresolution analysis (AMR) for detecting the generated disorders. The data obtained can be processed so as to be used for a possible predictive maintenance in the protection equipment of electrical network, since they are prone to damage on prolonged operation under abnormal conditions of frequency and voltage.

Classificação de nódulos pulmonares em imagens tomográficas utilizando redes neurais artificiais em cascata

Lung cancer is the most common of malignant tumors, with 1.59 million new cases worldwide in 2012. Early detection is the main factor to determine the survival of patients affected by this disease. Furthermore, the correct classification is important to define the most appropriate therapeutic approach as well as suggest the prognosis and the clinical disease evolution. Among the exams used to detect lung cancer, computed tomography have been the most indicated. However, CT images are naturally complex and even experts medical are subject to fault detection or classification. In order to assist the detection of malignant tumors, computer-aided diagnosis systems have been developed to aid reduce the amount of false positives biopsies. In this work it was developed an automatic classification system of pulmonary nodules on CT images by using Artificial Neural Networks. Morphological, texture and intensity attributes were extracted from lung nodules cut tomographic images using elliptical regions of interest that they were subsequently segmented by Otsu method. These features were selected through statistical tests that compare populations (T test of Student and U test of Mann-Whitney); from which it originated a ranking. The features after selected, were inserted in Artificial Neural Networks (backpropagation) to compose two types of classification; one to classify nodules in malignant and benign (network 1); and another to classify two types of malignancies (network 2); featuring a cascade classifier. The best networks were associated and its performance was measured by the area under the ROC curve, where the network 1 and network 2 achieved performance equal to 0.901 and 0.892 respectively.

Modelagem molecular voltada para a construção de um nanobiossensor para detecção do herbicida Imazaquin

In this study, our goal was develop and describe a molecular model of the enzyme-inhibiting interaction which can be used for an optimized projection of a Microscope Force Atomic nanobiosensor to detect pesticides molecules, used in agriculture, to evaluate its accordance with limit levels stipulated in valid legislation for its use. The studied herbicide (imazaquin) is a typical member of imidazolinone family and is an inhibitor of the enzymatic activity of Acetohydroxiacid Synthase (AHAS) enzyme that is responsible for the first step of pathway for the synthesis of side-chains in amino acids. The analysis of this enzyme property in the presence of its cofactors was made to obtain structural information and charge distribution of the molecular surface to evaluate its capacity of became immobilized on the Microscopy Atomic Force tip. The computational simulation of the system, using Molecular Dynamics, was possible with the force-field parameters for the cofactor and the herbicides obtained by the online tool SwissParam and it was implemented in force-field CHARMM27, used by software GROMACS; then appropriated simulations were made to validate the new parameters. The molecular orientation of the AHAS was defined based on electrostatic map and the availability of the herbicide in the active site. Steered Molecular Dynamics (SMD) Simulations, followed by quantum mechanics calculations for more representative frames, according to the sequential QM/MM methodology, in a specific direction of extraction of the herbicide from the active site. Therefore, external harmonic forces were applied with similar force constants of AFM cantilever for to simulate herbicide detection experiments by the proposed nanobiosensor. Force value of 1391 pN and binding energy of -14048.52 kJ mol-1 were calculated.

Herramienta para la extracción automática de metadatos en vídeos de dispositivos móviles

Actualmente el número de cámaras fotográficas en dispositivos móviles crece a un ritmo imparable. Asimismo la calidad y prestaciones de las mismas hacen que sean de uso común, desbancando poco a poco a las Cámaras fotográficas digitales. Este escenario produce que el análisis forense de este tipo de vídeos cobre especial importancia y sea necesario y útil en multitud de situaciones (pruebas en casos judiciales, espionaje industrial, privación de la libertad de prensa, pederastia, etc). En este trabajo se ha desarrollado una herramienta de ayuda al analista forense en el proceso de análisis de los metadatos de vídeos en formato MP4 con compresión H.264 y ACC. La herramienta permite diversas funciones complejas como son los distintos tipos de consultas avanzadas sobre la información de los metadatos de grandes conjuntos de vídeos o funciones de geoposicionamiento.

Avaliação do AAM - Active Appearance Model para detecção de regiões de interesse em radiografias carpais na estimativa da idade óssea através do método TW

In several areas of health professionals (pediatricians, nutritionists, orthopedists, endocrinologists, dentists, etc.) are used in the assessment of bone age to diagnose growth disorders in children. Through interviews with specialists in diagnostic imaging and research done in the literature, we identified the TW method - Tanner and Whitehouse as the most efficient. Even achieving better results than other methods, it is still not the most used, due to the complexity of their use. This work presents the possibility of automation of this method and therefore that its use more widespread. Also in this work, they are met two important steps in the evaluation of bone age, identification and classification of regions of interest. Even in the radiography in which the positioning of the hands were not suitable for TW method, the identification algorithm of the fingers showed good results. As the use AAM - Active Appearance Models showed good results in the identification of regions of interest even in radiographs with high contrast and brightness variation. It has been shown through appearance, good results in the classification of the epiphysis in their stages of development, being chosen the average epiphysis finger III (middle) to show the performance. The final results show an average percentage of 90% hit and misclassified, it was found that the error went away just one stage of the correct stage.

Diagnóstico de consumos anómalos de energia: abordagem por classificação

Durante o período de funcionamento de uma instalação eléctrica podem ocorrer várias anomalias. Enquanto muitas delas apenas são identificadas tardiamente, outras acabam por nunca serem identificadas como um potencial problema. A identificação atempada dessas anomalias permite a realização de um diagnóstico que leve à correcção das suas causas evitando assim os desperdícios e prejuízos inerentes. A identificação de um consumo anómalo pode ser realizada, de forma automática ou semi automática através de sistemas de apoio que permitam sinalizar falhas ou comportamentos anormais. O trabalho apresentado nesta dissertação pretende possibilitar esta sinalização apenas através da análise dos dados de consumo medidos em tempo real e comparados com dados históricos através de uma abordagem baseada em classificação, recorrendo a métodos de clustering. Foram testadas diferentes abordagens em três casos distintos, dois relativos a consumidores residenciais para os quais existiam registos de consumo durante um período alargado, e um relativo a uma instalação desportiva, para a qual é possível aceder em tempo real ao sistema de gestão de consumos via web. O sistema implementado proporciona vários tipos de informação ao utilizador, permitindo visualizar graficamente a existência de uma potencial anomalia quando a disparidade entre a classificação do consumo no instante e a classe do consumo de referência for significativa.

Extracción automática de nexos léxicos

Programa de doctorado: Simulación numérica en Ciencias y Tecnología

Plane Detection Using Affine Homography

AIRES, Kelson R. T.; ARAÚJO, Hélder J.; MEDEIROS, Adelardo A. D. Plane Detection Using Affine Homography. In: CONGRESSO BRASILEIRO DE AUTOMÁTICA, 2008, Juiz de Fora, MG: Anais... do CBA 2008.

Atenção automática para faces de compaixão no auto-criticismo

O auto-criticismo é um traço de personalidade preditor de psicopatologia. Sabe-se que indivíduos com elevado auto-criticismo tendem a processar a compaixão como um estímulo ameaçador. Apesar destes dados, a literatura é escassa no que se refere à forma como os indivíduos com elevado auto-criticismo reagem perante emoções complexas, como o criticismo e a compaixão. Desta forma, no presente estudo foram utilizadas faces de compaixão, criticismo e neutras como estímulos distratores, em que o estímulo relevante consistiu na identificação de uma letra num conjunto delas. Os resultados mostraram que as pessoas com elevado auto-criticismo tenderam a errar mais e a ter maiores tempos de resposta na tarefa principal quando o estímulo distrator foi uma face de compaixão. Estes dados sugerem que a atenção automática de indivíduos com elevado auto-criticismo pode ser afetada perante estímulos faciais de compaixão.

Anotação Semântica Automática do Currículo Lattes Utilizando Linked Open Data

A Internet possui inúmeros tipos de documentos e é uma influente fonte de informação.O conteúdo Web é projetado para os seres humanos interpretarem e não para as máquinas.Os sistemas de busca tradicionais são imprecisos na recuperação de informações. Ogoverno utiliza e disponibiliza documentos na Web para que os cidadãos e seus própriossetores organizacionais os utilizem, porém carece de ferramentas que apoiem na tarefa darecuperação desses documentos. Como exemplo, podemos citar a Plataforma de CurrículosLattes administrada pelo Cnpq.A Web semântica possui a finalidade de otimizar a recuperação dos documentos, ondeesses recebem significados, permitindo que tanto as pessoas quanto as máquinas possamcompreender o significado de uma informação. A falta de semântica em nossos documentos,resultam em pesquisas ineficazes, com informações divergentes e ambíguas. Aanotação semântica é o caminho para promover a semântica em documentos.O objetivo da dissertação é montar um arcabouço com os conceitos da Web Semânticaque possibilite anotar automaticamente o Currículo Lattes por meio de bases de dadosabertas (Linked Open Data), as quais armazenam o significado de termos e expressões.O problema da pesquisa está baseado em saber quais são os conceitos associados à WebSemântica que podem contribuir para a Anotação Semântica Automática do CurrículoLattes utilizando o Linked Open Data (LOD)?Na Revisão Sistemática da Literatura foi apresentado conceitos (anotação manual, automática,semi-automática, anotação intrusiva...), ferramentas (Extrator de Entidade...)e tecnologias (RDF, RDFa, SPARQL..) relativas ao tema. A aplicação desses conceitosoportunizou a criação do Sistema Lattes Web Semântico. O sistema possibilita a importaçãodo currículo XML da Plataforma Lattes, efetua a anotação automática dos dadosdisponibilizados utilizando as bases de dados abertas e possibilita efetuar consultas semânticas.A validação do sistema é realizada com a apresentação de currículos anotados e a realizaçãode consultas utilizando dados externos pertencentes ao LOD. Por fim é apresentado asconclusões, dificuldades encontradas e proposta de trabalhos futuros.

Diseño de una máquina extrusora automática para la fabricación de retacados de arcilla empleados en la industria de la minería

Tesis (Ingeniero(a) en Automatización).--Universidad de La Salle. Facultad de Ingeniería. Programa de Ingeniería en Automatización, 2015