The use of ICT in the course “Photography” in university education. First results of a teaching innovation project at the University of Murcia

The new pedagogical framework arisen since the Bologna Declaration,the Prague Communiquéand the introduction of the European Higher Education Area (EHEA), encourages, significantly, the use of new Communication and Information Technology to evolve teaching methodologies. The different ways teachers relate to learners have undergone a staggering change from which educational initiatives have emerged. Many of them are based on contents’ democratization through the use of ICT. The current article is intended to show the results obtained until the 2012/2013 academic course, since the implementation of the teaching innovation project entitled “The use of ICT for the students’ autonomous learning in the university education of the course Photography. Elaboration of a virtual classroom and results’ analysis related to the acquisition of skills and competencies” that has been developed in the course called Draw with light: Photography, belonging to the Fine Arts Degree at the University of Murcia.

Effect of a pharmacist-led multicomponent intervention focussing on the medication monitoring phase to prevent potential adverse drug events in nursing homes

OBJECTIVES: To determine the extent to which the use of a clinical informatics tool that implements prospective monitoring plans reduces the incidence of potential delirium, falls, hospitalizations potentially due to adverse drug events, and mortality.

DESIGN: Randomized cluster trial.

SETTING: Twenty-five nursing homes serviced by two long-term care pharmacies.

PARTICIPANTS: Residents living in nursing homes during 2003 (1,711 in 12 intervention; 1,491 in 13 usual care) and 2004 (1,769 in 12 intervention; 1,552 in 13 usual care).

INTERVENTION: The pharmacy automatically generated Geriatric Risk Assessment MedGuide (GRAM) reports and automated monitoring plans for falls and delirium within 24 hours of admission or as part of the normal time frame of federally mandated drug regimen review.

MEASUREMENTS: Incidence of potential delirium, falls, hospitalizations potentially due to adverse drug events, and mortality.

RESULTS: GRAM triggered monitoring plans for 491 residents. Newly admitted residents in the intervention homes experienced a lower rate of potential delirium onset than those in usual care homes (adjusted hazard ratio (HR)=0.42, 95% confidence interval (CI)=0.35–0.52), overall hospitalization (adjusted HR=0.89, 95% CI=0.72–1.09), and mortality (adjusted HR=0.88, 95% CI=0.66–1.16). In longer stay residents, the effects of the intervention were attenuated, and all estimates included unity.

CONCLUSION: Using health information technology in long-term care pharmacies to identify residents who might benefit from the implementation of prospective medication monitoring care plans when complex medication regimens carry potential risks for falls and delirium may reduce adverse effects associated with appropriate medication use.

Defining a Research Agenda in Value Driven Design: Questions That Need to be Asked

Value driven design is an innovative design process that utilizes the optimization of a system level value function to determine the best possible design. This contrasts with more traditional systems engineering techniques, which rely on satisfying requirements to determine the design solution. While ‘design for value’ is intuitively acceptable, the transformation of value driven design concepts into practical tools and methods for its application is challenging. This, coupled with the growing popularity of value-centric design philosophies, has led to a proposed research agenda in value driven design. This research agenda asks fundamental questions about the design philosophy and attempts to identify areas of significant challenge. The research agenda is meant to stimulate discussion in the field, as well as prompt research that will lead to the development of tools and methodologies that will facilitate the application of value driven design and further the state of the art.

Design of composite stiffener run-outs for damage tolerance

A major concern in stiffener run-out regions, where the stiffener is terminated due to a cut-out, intersecting rib, or some other structural feature which interrupts the load path, is the relatively weak skin–stiffener interface in the absence of mechanical fasteners. More damage tolerant stiffener run-outs are clearly required and these are investigated in this paper. Using a parametric finite element analysis, the run-out region was optimised for stable debonding crack growth. The modified run-out, as well as a baseline configuration, were manufactured and tested. Damage initiation and propagation was investigated in detail using state-of-the-art monitoring equipment including Acoustic Emission and Digital Image Correlation. As expected, the baseline configuration failed catastrophically. The modified run-out showed improved crack-growth stability, but subsequent delamination failure in the stiffener promptly led to catastrophic failure.

Assessing Lifetime Homes Standards and Part M Building Regulations for Housing Design in the UK

The aims of this article are to examine Lifetime Home Standards (LTHS) and Part M of the UK Building Regulations and to discuss how relevant and successful they are. The UK government expects all new homes to be built to LTHS by 2013. This is increasingly important with an ageing population. The home environment can enable independence and provide a therapeutic place for everyone. As Part M of the building regulations are compulsory in all housing and LTHS are mandatory for public sector housing, a review of research articles was undertaken on these standards. The paper begins with a brief background on accessibility regulations, followed by a critical review of the standards that takes the body of literature that has been written around them into account. This review suggests that the standards should be improved and that designers and architects face challenges to creatively incorporate them into housing design.

Dissidents with an innovation cause? Non-institutionalized actors ’ online social knowledge sharing, solution-finding tensions and technology management innovation

Purpose
– Traditionally, most studies focus on institutionalized management-driven actors to understand technology management innovation. The purpose of this paper is to argue that there is a need for research to study the nature and role of dissident non-institutionalized actors’ (i.e. outsourced web designers and rapid application software developers). The authors propose that through online social knowledge sharing, non-institutionalized actors’ solution-finding tensions enable technology management innovation.

Design/methodology/approach
– A synthesis of the literature and an analysis of the data (21 interviews) provided insights in three areas of solution-finding tensions enabling management innovation. The authors frame the analysis on the peripherally deviant work and the nature of the ways that dissident non-institutionalized actors deviate from their clients (understood as the firm) original contracted objectives.

Findings
– The findings provide insights into the productive role of solution-finding tensions in enabling opportunities for management service innovation. Furthermore, deviant practices that leverage non-institutionalized actors’ online social knowledge to fulfill customers’ requirements are not interpreted negatively, but as a positive willingness to proactively explore alternative paths.

Research limitations/implications
– The findings demonstrate the importance of dissident non-institutionalized actors in technology management innovation. However, this work is based on a single country (USA) and additional research is needed to validate and generalize the findings in other cultural and institutional settings.

Originality/value
– This paper provides new insights into the perceptions of dissident non-institutionalized actors in the practice of IT managerial decision making. The work departs from, but also extends, the previous literature, demonstrating that peripherally deviant work in solution-finding practice creates tensions, enabling management innovation between IT providers and users.

Irish Timber – Characterisation, Potential and Innovation

In order to increase the utilisation of Irish timber in construction and novel engineered wood products, the mechanical and physical properties of the material must be established. For timber products used for structural applications, the fundamental properties are the modulus of elasticity, bending strength, density and dimensional stability, as these define the structural grade of the material. In order to develop engineering design models for applications such as reinforced timber, knowledge of the nonlinear stress-strain behaviour in compression is also required.
The paper presents the programme and results of an ongoing research project ‘Innovation in Irish Timber Usage’ which focuses on the characterisation of Sitka spruce as it is the most widely grown species in Ireland. In the past, a number of studies have been conducted to determine the properties of Irish-grown Sitka spruce. Nevertheless, due to the changes that have taken place in silvicultural practices since the publication of these studies, there is a need to determine how these properties have changed. This paper presents the data gathered from historical studies together with the results of an extensive test programme undertaken to characterise the properties of the present resource.
Moreover, the study preliminary examines the potential use of Irish grown Sitka spruce in novel timber products. Construction applications, such as fibre-reinforced polymer reinforced timber elements and connections, and cross-laminated timber are investigated.

An Inclusive Design Dialogue on Ethics and Aesthetics

One of the many definitions of inclusive design is that it is a user-led approach to design. To date its focus has been on ‘critical’ users, in particular disabled people. As such, there is pressure to design environments that meet the often urgent and complex demands of these users. Designers, uncertain of their knowledge, rely heavily on user input and guidance, often resulting in designs that are ‘solution’ driven (rather than solution seeking) and short term; users focus on what they need, not what they might need. This paper argues that design needs to reclaim an equal presence within inclusive design. It proposes that the ‘weakness’ of design lies in the uneasy and at times conflicting relationship between ethics and aesthetics. The paper itself is constructed around a dialogue between two academics, one concerned with critical user needs, the other with aesthetics, but both directed towards the support of design quality

Meta-analysis of the influence of experimental design on effect size in peer tutoring outcomes in elementary, middle and high school settings.

A meta-analysis was undertaken on a form of cooperative learning, peer tutoring. The effects of experimental design on outcomes were explored, as measured by Effect Size (ES). 185 studies were included in the meta-analysis. Highest ES were reported for quasi-experimental studies. ES reduced as experimental design moved from single pre-test factor matched, to multiple-factor matched randomized controlled trials. ES reduced when designs used standardised, rather than self-designed measures, The implications for future meta-analyses and research in cooperative learning are explored.

Open for Business: Universities, Entrepreneurial Academics and Open Innovation

The emergence of open innovation theory and practice, alongside the evolution to a quadruple helix system of innovation, has led to a need for universities to rethink their models of engagement with industry and wider society. One important element in this system is the entrepreneurial academics; however there is a lack of research considering the motivations of entrepreneurial academics, who differ from academic entrepreneurs, to engage in knowledge transfer in line with open innovation policy. This research offers practical insights on whether new models of engagement, increasingly offered by universities, really address the policy drivers for open innovation. Furthermore, this research explores whether these activities might motivate entrepreneurial academics to participate. Preliminary findings identify that many supposedly new collaboration activities do not really motivate entrepreneurial academics. This may have important implications on the ability of universities to become truly open and to encourage their academics to become engaged in collaboration and impact.

Competency-Based Theory For Achieving Innovation: The Case Of Post-Disaster Reconstruction

For those working in the humanitarian sector, achieving positive outcomes for postdisaster communities through reconstruction projects is a pressing concern. In the wake of recent natural disasters, NGOs have become increasingly involved in the permanent reconstruction of affected communities. They have encountered significant barriers as they implement reconstruction programmes and this paper argues that it is important to address the visible lack of innovation that is partially to blame. The theoretical bedrock of a current research project will be used as the starting point for this argument, the overall goal of which is to design a competency-based framework model that can be used by NGOs in post-disaster reconstruction projects. Drawing on established theories of management, a unique perspective has been developed from which a competency-based reconstruction theory emerges. This theoretical framework brings together 3 distinct fields; Disaster Management, Strategic Management and Project Management, each vital
to the success of the model. The objectives of this paper are a) to investigate the role of NGOs in post-disaster reconstruction and establish the current standard of practice b) to determine the extent to which NGOs have the opportunity to contribute to sustainable community development through reconstruction c) to outline the main factors of a theoretical framework first proposed by Von Meding et al. 2009 and d) to identify the innovative measures that can be taken by NGOs to achieve more positive outcomes in their interventions. It is important that NGOs involved in post-disaster reconstruction become familiar with concepts and strategies such as those contained in this paper. Competency-based organizational change on the basis of this theory has the potential to help define the standard of best practice to which future NGO projects might align themselves.

Manufacturing System Simulation & Human Robot Interaction in VR:Manufacturing system simulation: Methodologies, software tools, case study in transportation design

Virtual Reality techniques are relatively new, having experienced significant development only during the last few years, in accordance with the progress achieved by computer science and hardware and software technologies. The study of such advanced design systems has led to the realization of an immersive environment in which new procedures for the evaluation of product prototypes, ergonomics and manufacturing operations have been simulated. The application of the environment realized to robotics, ergonomics, plant simulations and maintainability verifications has allowed us to highlight the advantages offered by a design methodology: the possibility of working on the industrial product in the first phase of conception; of placing the designer in front of the virtual reproduction of the product in a realistic way; and of interacting with the same concept. The aim of this book is to present an updated vision of VM through different aspects. We will describe the trends and results achieved in the automotive, aerospace and railway fields, in terms of the Digital Product Creation Process to design the product and the manufacturing process.

Design para o futuro: o indivíduo entre o artifício e a natureza

O presente trabalho tem como objectivo contribuir para o aprofundamento de estudos vocacionados para a evolução do mundo material enquanto factor determinante para o futuro do Planeta, do Homem e dos seus artifícios. Sendo o tema central da investigação o Design Industrial enquanto mediador incontornável dessa relação, os conceitos de Design Biónico, de Design Natural, de Biodesign e de Design Simbiótico, assim como as metodologias a si inerentes, assumem-se como protagonistas do estudo desenvolvido. A tese é composta por um primeiro capítulo introdutório onde se define o seu objecto de estudo e se apresentam as linhas condutoras da investigação. O segundo capítulo é dedicado ao enquadramento teórico dos temas a abordar, nomeadamente o conceito de “artifício” considerando os seus tradicionais e novos significados e aplicações e a História do Design Industrial numa perspectiva que considera a evolução da indústria e da disciplina nesse contexto. No terceiro capítulo desenvolve-se a análise das propostas conceptuais e metodológicas dos designers Victor Papanek, Luigi Colani e Paulo Parra, por recurso específico, respectivamente, aos pressupostos inscritos em Design Biónico, Design Natural, Biodesign e Design Simbiótico, perseguindo-se como objectivo a sua sistematização em conteúdos passíveis de contribuírem para novas investigações/aplicações, nomeadamente no âmbito daquilo que a autora designa como Inovação Tecnológica na Concepção e EcoBio-Inovação.

A cultura cerâmica no design da joalharia portuguesa

Este trabalho de investigação tem como objectivo contribuir para o aprofundamento de estudos vocacionados para o desenvolvimento de novos produtos, suportado pelo encontro entre duas Culturas do Fazer, a cerâmica e a joalharia, e orientado pela Cultura do Projecto, o design. A análise e a ponderação acerca dos pontos em comum entre estas duas culturas materiais, em particular no contexto português, são a base para a definição e a aplicação de um novo concept de produto, mediado por uma metodologia projectual e sustentado nas noções de Modularidade, de Arquétipo, de Tipologia, de Valor Semântico, de Valor Simbólico, de Sistema de Produto e de Design Estratégico. Esta dissertação desenvolve-se ao longo de duas partes, após uma introdução em que se define o objecto de estudo e a metodologia da investigação. A primeira parte tem quatro capítulos. O primeiro capítulo trata do enquadramento teórico da Cultura Cerâmica a partir de uma análise históricotipologica (desde a cultura mesopotâmica até ao século XXI) orientando-se para o contexto português: os lugares de produção cerâmica e o azulejo como portador de cultura. O segundo capítulo, centrando-se em Portugal como lugar de investigação, estuda a Joalharia num âmbito experimental, analisando o valor simbólico da jóia. No terceiro capítulo interpreta-se o design entre tradição e inovação, nomeadamente a sua importância como veiculador cultural, o seu relacionamento com o artesanato e a relevância do laboratório como lugar de experimentação. O quarto capítulo analisa a acção do cruzamento entre os dois sectores – cerâmica e joalharia – na definição da cultura material, na Europa e em Portugal. Clarifica-se também o conceito de Sistema de Produto quando aplicado, como projecto piloto, à Joalharia, servindo-se de estudos de caso como mediadores experimentais. A segunda parte tem três capítulos. No primeiro capítulo analisam-se e averiguam-se tipologias de jóias existentes, assim como algumas provas laboratoriais que permitem o entendimento da tecnologia cerâmica no desenvolvimento de um projecto de Joalharia. Possibilita-se, deste modo, o surgimento dos primeiros estudos tipológico-formais determinantes para a definição da tipologia de projecto jóia-azulejo. No segundo capítulo define-se uma estratégia metodológica para aplicar a um produto de jóia cerâmica, analisando a particular importância do factor emocional na tomada de decisão do cliente. O terceiro capítulo defende um projecto experimental, como momento de verificação, aplicação e materialização do estudo desenvolvido nesta dissertação, proporcionando uma ocasião projectual para avaliar as potencialidades de um produto futuro, orientado pelo design, fruto do cruzamento entre a Cultura Cerâmica e a Joalharia em Portugal.