Educational Technology Decision-Making: A Case Study on Technology Acquisition for 746,000 Ontario Students

Very little research has examined K–12 educational technology decision-making in Canada. This collective case study explores the technology procurement process in Ontario’s publicly funded school districts to determine if it is informed by the relevant research, grounded in best practices, and enhances student learning. Using a qualitative approach, 10 senior leaders (i.e., chief information officers, superintendents, etc.) were interviewed. A combination of open-ended and closed-ended questions were used to reveal the most important factors driving technology acquisition, research support, governance procedures, data use, and assessment and return on investment (ROI) measures utilized by school districts in their implementation of educational technology. After participants were interviewed, the data were transcribed, member checked, and then submitted to “Computer-assisted NCT analysis” (Friese, 2014) using ATLAS.ti. The findings show that senior leaders are making acquisitions that are not aligned with current scholarship and not with student learning as the focus. It was also determined that districts struggle to use data-driven decision-making to support the governance of educational technology spending. Finally, the results showed that districts do not have effective assessment measures in place to determine the efficacy or ROI of a purchased technology. Although data are limited to the responses of 10 senior leaders, findings represent the technology leadership for approximately 746,000 Ontario students. The study is meant to serve as an informative resource for senior leaders and presents strategic and research-validated approaches to technology procurement. Further, the study has the potential to refine technology decision-making, policies, and practices in K–12 education.

Triangulation of rights, balancing of interests : exploring the tensions between freedom of conscience and freedom of religion in comparative constitutional law

La liberté de religion, souvent reconnue comme étant la « première liberté » dans de nombreuses traditions juridiques, reflète également les différentes conceptions de la place de l’individu et de la communauté dans la société. Notre étude analysera les modèles constitutionnels canadien, américain et européen de liberté de religion et conscience. Dans un premier chapitre, nous examinerons les conceptions théoriques de la religion dans les sciences sociales ainsi les approches juridiques afin de mieux cerner comment la religion est conçue et de plus, comprendre les diverses influences sur sa conceptualisation. Dans un second et troisième chapitre, nous tenterons d’une part, de qualifier la relation entre la liberté de conscience et la liberté de religion au Canada en nous livrant à une analyse approfondie des deux libertés et d’autre part, d’identifier les questions qui demeurent irrésolues. Dans le chapitre final, nous observerons comment la liberté de conscience a été interprétée dans les contextes américain et dans l’Union Européenne, par le biais de la Cour Européenne des droits de l’Homme. Notre hypothèse est que l’on peut arriver à une meilleure compréhension de la relation entre les libertés de conscience et religion en clarifiant les conceptions théoriques de la religion et de la conscience en droit constitutionnel comparé.

The specific in vivo role of PPARgamma and its downstream signaling pathway in the pathophysiology of Osteoarthritis

L'arthrose est une maladie articulaire dégénérative, avec une pathogenèse inconnue. Des études récentes suggèrent que l'activation du facteur de transcription du récepteur activateur de la prolifération des peroxysomes (PPAR) gamma est une cible thérapeutique pour ce maladie. Les agonistes du PPARγ inhibent l'inflammation et réduisent la synthèse des produits de dégradation du cartilage in vitro et in vivo. Cependant, des études utilisant des agonistes du PPARγ n’élucident pas les effets exacts médiés par ce gène complexe. En effet, certains de ces agonistes ont la capacité de régulariser d'autres voies de signalisation indépendantes de PPARγ, ainsi entraînant des effets secondaires graves. Afin d'obtenir une efficacité thérapeutique avec potentiellement moins de problèmes de sécurité, il est donc essentiel d'élucider, in vivo, le rôle exact de PPARγ dans la physiopathologie OA. Mon projet de thèse permettra de déterminer, pour la première fois, le rôle spécifique de PPARγ in vivo dans la physiopathologie OA. Les souris utilisées pour l’étude avaient une délétion conditionnelle du gène PPARγ dans le cartilage. Ces dernières ont été générées en employant le système LoxP/Cre. Pour tester cette hypothèse, j'ai généré deux types de souris avec une délétion au PPARγ, (a) une suppression du gène PPARγ spécifiquement dans le cartilage germinale pour l'étude de l'arthrose liée au développement et à l'âge et (b) la suppression inductible du gène PPARγ spécifiquement dans le cartilage chez la souris adulte pour les études OA. L’étude précédente dans notre laboratoire, utilisant ces souris ayant une délétion au gène PPARγ germinales, montre que ces souris présentent des anomalies du développement du cartilage. J'ai également exploré si ces souris qui présentent des défauts précoces du développement ont toutes les modifications phénotypiques dans le cartilage au cours du vieillissement. Mes résultats ont montré que les souris adultes, ayant une délétion au gène PPARγ, ont présenter un phénotype de l'arthrose spontanée associée à une dégradation du cartilage, l’hypocellularité, la fibrose synoviale. Cette étude a montré que PPARγ est un régulateur essentiel pour le cartilage, et c’est le manque (l’absence) de ce dernier qui conduit à un phénotype de l'arthrose spontanée accélérée (American Journal of Pathologie). A partir de ce but de l'étude, on n’a pas pu vérifier si ces souris présentaient l’OA spontanée en raison des défauts de développement ou à la suite de la délétion du gène PPARγ. Pour contourner les défauts de développement, j'ai généré des souris ayant une délétion du gène PPARγ spécifiquement dans le cartilage inductible avec le système Col2rTACre. Ces souris ont été soumises à modèle de la chirurgie OA (DMM: déstabilisation du ménisque médial) et les résultats révèlent que les souris PPARγ KO ont une dégradation accélérée du cartilage, une hypocellularité, une fibrose synoviale et une augmentation de l'expression des marqueurs cataboliques et des marqueurs inflammatoire. La perte de PPAR dans le cartilage articulaire est un évènement critique qui initie la dégradation de cartilage dans OA. Les études récentes suggèrent que le procès d’autophagie, une forme de survie cellulaire programmée, est altéré pendant l’OA et peut contribuer vers une protection diminuée des cellules, résultant la dégradation du cartilage. J’ai donc exploré le rôle de PPARγ dans la protection des cellules en déterminant l’effet de manque de PPARγ dans le cartilage par l’expression de mTOR (régulateur négatif principal d’autophagie) et les gènes d’autophagie durant OA. Mes résultats ont montré que les souris KO PPARγ présentent également une augmentation sur l'expression de mTOR et une diminution sur l’expression des marqueurs autophagiques en comparaison avec les chondrocytes articulaires isolés des souris contrôles OA. J'ai suggéré l'hypothèse que PPARγ contrôle la régulation de la signalisation de mTOR/autophagie, et finalement la mort des chondrocytes et l’expression des facteurs cataboliques et les facteurs inflammatoire. Pour tester cette hypothèse, j’ai fait la transfection des chondrocytes arthrosiques PPARγ-KO avec le vecteur d’expression de PPARγ pour déterminer si la restauration de l'expression de PPARγ peut sauver le phénotype des cellules PPARγ-KO OA. J'ai observé que la restauration de l'expression de PPARγ dans les cellules PPARγ-KO en présence du vecteur d'expression PPARγ, a pu considérablement régulariser négativement l'expression de mTOR et mettre en règle positivement l'expression des gènes autophagiques ainsi que le sauvetage significative de l'expression du collagène de type II et l’aggrecan et de baisser de manière significative l'expression de marqueurs cataboliques critiques et des marqueurs inflammatoires. Pour prouver que l’augmentation de la signalisation de mTOR et la diminution de l'autophagie est responsable du phénotype OA accélérée observée dans les souris PPARγ KO in vivo, j'ai généré les souris doubles KO PPARγ- mTOR inductible spécifique du cartilage en utilisant le système Col2 - rtTA -Cre et soumis ces souris à DMM modèle de l'arthrose. Mes résultants démontrent que les souris avec PPARγ- mTOR doubles KO ont été significativement protégés contre les OA DMM induites associées à une protection significative contre la destruction du cartilage, la perte de protéoglycanes et la perte de chondro-cellularité par rapport aux souris témoins. Considérant que mTOR est un répresseur majeur de l'autophagie, j'ai trouvé que l'expression de deux marqueurs de l'autophagie critiques (ULK1 et LC3B) a été significativement plus élevée dans les chondrocytes extraits les souris doubles KO PPARγ-mTOR par rapport aux souris témoins. En plus, les études de sauvetage in vitro en utilisant le vecteur d'expression PPAR et les études in vivo utilisant les souris doubles KO PPARγ- mTOR montrent que PPARγ est impliqué dans la régulation de la protéine signalant de mTOR/autophagie dans le cartilage articulaire. Ces résultats contournent PPARγ et sa signalisation en aval de mTOR/autophagie en tant que cibles thérapeutiques potentielles pour le traitement de l'arthrose.

Study on Fuzzy Ordered FuzzyTopological Spaces

In this study we combine the notions of fuzzy order and fuzzy topology of Chang and define fuzzy ordered fuzzy topological space. Its various properties are analysed. Product, quotient, union and intersection of fuzzy orders are introduced. Besides, fuzzy order preserving maps and various fuzzy completeness are investigated. Finally an attempt is made to study the notion of generalized fuzzy ordered fuzzy topological space by considering fuzzy order defined on a fuzzy subset.

Equality of Opportunity in Public Employment : Judicial Perspectives on Backwardness

This thesis is a study of -Equality of Opportunity in Public Employment : Judicial Perspectives on Backwardness. This study is an attempt to evaluate the concept of backwardness and equality of opportunity in employment and to assess the judicial perspectives in relation to them. The study reveals that the recent review petition of the Constitution Bench did not assess the decision of Chakradhar and its import. The study reveals that the Indian judiciary could successfully locate and apply the above principles. It was-Justice Subba Rao's nascent attempt in Devadasan which marked the starting point of such a jurisprudential enquiry. Later Thomas developed the thoughts by a reading new meaning and content to equality provisions of the Constitution which included the elimination of inequalities as the positive content of Articles 14 and 16(1) and elevated reservation provision to the same status of equality principles under the Constitution. Soshit, Vasanth Kumar and Mandal supplemented further to the jurisprudential contents. In this process, the courts were guided by the theories of John Rawls, David Miller, Ronald Dworkin, Max Weber and Roscoe Pound. Thus there was a slow and steady process of transformation of the reservation provision. From an anti-meritarian, unenforceable and enabling provision, it reached a stage of equally relevant and explanatory part of fundamental right to equality. Mandal viewed it as a part of sharing of State power. Though this can be seen by rereading and re-joining thoughts of judges in this regard, the judicial approach lacks coherence and concerted efforts in evolving a jurisprudential basis for protective discrimination. The deliberations of the framers of the Constitution reveals that there was much confusion and indeterminacy with regard to the concept of Backwardness. The study shows that the judiciary has been keeping intact the framers’ expectation of having a reasonable quantum of reservation, preventing the undeserved sections from enjoying the benefit, avoiding its abuse and evolving a new criteria and rejecting the old ones.

Some problems in set topology relating group of homeomorphisms and order

In this thesis we investigate some problems in set theoretical topology related to the concepts of the group of homeomorphisms and order. Many problems considered are directly or indirectly related to the concept of the group of homeomorphisms of a topological space onto itself. Order theoretic methods are used extensively. Chapter-l deals with the group of homeomorphisms. This concept has been investigated by several authors for many years from different angles. It was observed that nonhomeomorphic topological spaces can have isomorphic groups of homeomorphisms. Many problems relating the topological properties of a space and the algebraic properties of its group of homeomorphisms were investigated. The group of isomorphisms of several algebraic, geometric, order theoretic and topological structures had also been investigated. A related concept of the semigroup of continuous functions of a topological space also received attention

Chemometric study on the trace metal accumulation in the sediments of the Cochin Estuary―Southwest coast of India

The distribution and accumulation of trace metals in the sediments of the Cochin estuary during the pre-monsoon, monsoon and post-monsoon periods were investigated. Sediment samples from 14 locations were collected and analysed for the metal contents (Mg, Cr, Mn, Fe, Co, Ni, Cu, Zn, Cd and Pb), organic carbon, total nitrogen, total sulphur and grain size. The data were processed using statistical tools like correlation, factor and cluster analysis. The study revealed an enrichment of Cd and Zn in the study area particularly at station 2, which is confirmed by enrichment factor, contamination factor and geoaccumulation index. The factor analysis revealed that the source of Cd and Zn may be same. The study indicated that the spatial variation for the metals like Mg, Cr, Fe, Co, Ni, Cu, Zn, Cd and Pb were predominant unlike Mn which shows a temporal variation. The strong association of trace metals with Fe and Mn hydroxides and oxides are prominent along the Cochin estuary. The anthropogenic inputs of industrial effluents mainly control the trace metals enrichment in the Cochin estuary

Studies on the use of Nanokaolin, MWCNT and Graphene in NBR and SBR

The current research investigates the possibility of using unmodified and modified nanokaolin, multiwalled carbon nanotube (MWCNT) and graphene as fillers to impart enhancement in mechanical, thermal, and electrical properties to the elastomers. Taking advantage of latex blending method, nanoclay, MWCNT and graphene dispersions, prepared by ultra sound sonication are dispersed in polymer latices. The improvement in material properties indicated better interaction between filler and the polymer.MWCNT and graphene imparted electrical conductivity with simultaneous improvement in mechanical properties. Layered silicates prepared by microwave method also significantly improve the mechanical properties of the nanocomposites. The thesis entitled ‘Studies on the use of Nanokaolin, MWCNT and Graphene in NBR and SBR’ consists of ten chapters. The first chapter is a concise introduction of nanocomposites, nanofillers, elastomeric matrices and applications of polymer nanocomposites. The state-of-art research in elastomer based nanocomposites is also presented. At the end of this chapter the main objectives of the work are mentioned. Chapter 2 outlines the specifications of various materials used, details of experimental techniques employed for preparing and characterizing nanocomposites. Chapter3 includes characterization of the nanofillers, optimsation of cure time of latex based composites and the methods used for the preparation of latex based and dry rubber based nanocomposites. Chapter4 presents the reinforcing effect of the nanofillers in XNBR latex and the characterization of the nanocomposites. Chapter5 comprises the effect of nanofillers on the properties of SBR latex and their characterization Chapter 6 deals with the study of cure characteristics, mechanical and thermal properties and the characterization of NBR based nanocomposites. Chapter7 is the microwave studies of MWCNT and graphene filled elastomeric nanocomposites. Chapter 8 gives details of the preparation of layered silicates, their characterization and use in different elastomeric matrices. Chapter 9 is the study of mechanical properties of nanoclay incorporated nitrile gloves .Chapter 10 presents the summary and conclusions of the investigation.

Searching for the perfect surface area normalizing term - a comparison of BET surface area-, geometric surface area- and mass-normalized dissolution rates of anorthite and biotite

Dissolution rates were calculated for a range of grain sizes of anorthite and biotite dissolved under far from equilibrium conditions at pH 3, T = 20 degrees C. Dissolution rates were normalized to initial and final BET surface area, geometric surface area, mass and (for biotite only) geometric edge surface area. Constant (within error) dissolution rates were only obtained by normalizing to initial BET surface area for biotite. The normalizing term that gave the smallest variation about the mean for anorthite was initial BET surface area. In field studies, only current (final) surface area is measurable. In this study, final geometric surface area gave the smallest variation for anorthite dissolution rates and final geometric edge surface area for biotite dissolution rates. (c) 2005 Published by Elsevier B.V.

Predicting the effects of nitrogen and planting density on maize water use in semi-arid Kenya

Models are important tools to assess the scope of management effects on crop productivity under different climatic and soil regimes. Accordingly, this study developed and used a simple model to assess the effects of nitrogen fertiliser and planting density on the water use efficiency (q) of maize in semi-arid Kenya. Field experiments were undertaken at Sonning, Berkshire, UK, in 1996 (one sowing) and 1997 (two sowings). The results from the field experiments plus soil and weather data for Machakos, Kenya (1 degree 33'S, 37 degree 14'E and 1560 m above sea level), were then used to predict the effects that N application and planting density may have on water use by a maize crop grown in semi-arid Kenya. The increase in q due to N application was greater under irrigated (15%-19%) than rainfed (7%-8%) conditions. Also, high planting density increased q (by 13%) under irrigation but decreased q (by 17%) under rainfed conditions. The current study has shown the significance of crop modelling techniques in assessing the influence of N and planting density on maize production in one region of semi-arid Kenya where there is high variability of rainfall.

Follicle-stimulating hormone isoforms and plasma concentrations of estradiol and inhibin A in dairy cows with ovulatory and non-ovulatory follicles during the first postpartum follicle wave

Following parturition, all cows display a wave of ovarian follicular growth, but a large proportion fail to generate a preovulatory rise in estradiol, and hence fail to ovulate. Follicle-stimulating hormone (FSH) exists as multiple isoforms in the circulation depending on the type and extent of glycosylation, and this has pronounced effects on its biological properties. This study examined differences in plasma FSH, estradiol, and inhibin A concentrations, and the distribution of FSH isoforms in cows with ovulatory or atretic dominant follicles during the first postpartum follicle wave. Plasma FSH isoform distribution was examined in both groups during the period of final development of the dominant follicle by liquid phase isoelectric focusing. Cows with an ovulatory follicle had higher circulating estradiol and inhibin A concentrations, and lower plasma FSH concentrations. The distribution of FSH isoforms displayed a marked shift toward the less acidic isoforms in cows with ovulatory follicles. A higher proportion of the FSH isoforms had a pl>5.0 in cows with ovulatory follicles compared to those with atretic follicles. In addition, cows with ovulatory follicles had greater dry matter intake, superior energy balance, elevated circulating concentrations of insulin and insulin-like growth factor-I, and lower plasma nonesterified fatty acids. The shift in FSH isoforms toward a greater abundance of the less acidic isoforms appears to be a key component in determining the capability for producing a preovulatory rise in estradiol, and this shift in FSH isoforms was associated with more favorable bioenergetic and metabolic status. (C) 2008 Elsevier Inc. All rights reserved.

UK construction orders and output: A comparison of government and commercially available data 1995-2001

Because of the importance and potential usefulness of construction market statistics to firms and government, consistency between different sources of data is examined with a view to building a predictive model of construction output using construction data alone. However, a comparison of Department of Trade and Industry (DTI) and Office for National Statistics (ONS) series shows that the correlation coefcient (used as a measure of consistency) of the DTI output and DTI orders data and the correlation coefficient of the DTI output and ONS output data are low. It is not possible to derive a predictive model of DTI output based on DTI orders data alone. The question arises whether or not an alternative independent source of data may be used to predict DTI output data. Independent data produced by Emap Glenigan (EG), based on planning applications, potentially offers such a source of information. The EG data records the value of planning applications and their planned start and finish dates. However, as this data is ex ante and is not correlated with DTI output it is not possible to use this data to describe the volume of actual construction output. Nor is it possible to use the EG planning data to predict DTI construc-tion orders data. Further consideration of the issues raised reveal that it is not practically possible to develop a consistent predictive model of construction output using construction statistics gathered at different stages in the development process.

Implementing ‘Site BIM’: a case study of ICT innovation on a large hospital project

Numerous Building Information Modelling (BIM) tools are well established and potentially beneficial in certain uses. However, issues of adoption and implementation persist, particularly for on-site use of BIM tools in the construction phase. We describe an empirical case-study of the implementation of an innovative ‘Site BIM’ system on a major hospital construction project. The main contractor on the project developed BIM-enabled tools to allow site workers using mobile tablet personal computers to access design information and to capture work quality and progress data on-site. Accounts show that ‘Site BIM’, while judged to be successful and actively supporting users, was delivered through an exploratory and emergent development process of informal prototyping. Technical IT skills were adopted into the construction project through personal relationships and arrangements rather than formal processes. Implementation was driven by construction project employees rather than controlled centrally by the corporate IT function.

Study on the application of cool paintings for the passive cooling of existing buildings in Mediterranean climates

Building roofs play a very important role in the energy balance of buildings, especially in summer, when they are hit by a rather high solar irradiance. Depending on the type of finishing layer, roofs can absorb a great amount of heat and reach quite high temperatures on their outermost surface, which determines significant room overheating. However, the use of highly reflective cool materials can help to maintain low outer surface temperatures; this practice may improve indoor thermal comfort and reduce the cooling energy need during the hot season.This technology is currently well known and widely used in the USA, while receiving increasing attention in Europe. In order to investigate the effectiveness of cool roofs as a passive strategy for passive cooling in moderately hot climates, this paper presents the numerical results of a case study based on the dynamic thermal analysis of an existing office building in Catania (southern Italy, Mediterranean area). The results show how the application of a cool paint on the roof can enhance the thermal comfort of the occupants by reducing the operative temperatures of the rooms and to reduce the overall energy needs of the building for space heating and cooling.