927 resultados para Debt Collection Act in Nevada
Resumo:
The concrete for centuries constituted an essential structural element in the construction industry due to its relative ease of forming, before the weather durability, low cost, its lower maintenance compared to other materials such as steel. However, when the concrete is exposed to high temperatures tends to lose its mechanical characteristics, and may even result in loss of section, which undermines the stability and mechanical strength of structural elements. The pathologies resulting from exposure to elevated temperatures ranging from cracks, pops up chipping explosives (spalling). Recently, the technology of concrete is closely related to the study of its microstructure. The use of fibers added to concrete has been revealed as a solution to increase the mechanical strength of the concrete, it acts directly on the distribution of efforts to act in the play within the microstructure. In this work we used recycled PET fibers embedded in concrete with 15x2mm fck = 30MPa, water/cement ratio of 0.46, in works made for verification of mechanical strength of this mixture submitted to high temperature. The specimens of concrete with addition of PET fibers were tested after exposure to temperatures: ambient (30ºC), 100°C, 200°C, 300°C, 400°C, 600°C and 900°C. It was found that the concrete loses significant strength when exposed to temperatures above 300°C, however the use of fiber PET may delay the risk of collapse of structures for the formation of a network of channels that facilitate the escape of vapor 'water, reducing the pore pressure inside the structural element
Resumo:
The research was carried out in the urban area in Codó-MA, a small city the east part of Maranhão, which has 4,228.000 km2 (IBGE, 2000) and population of 113,768 hab. (IBGE, 2008). The city is also inside Codó-MA micro-region. The city is located in one of the lacking area in Brazil, where the Human Development Index (IDH) is approximately 0,558. It does not present an adequate model of management when talking about solid residue collecting. All of the solid residue produced and collected in the city is stored in an open area that they call lixão , which is located in a residence area in the suburbs. Because of that, a problem that involves public health and environmental areas, we understand it is necessary to investigate the way the local government treats and manages the solid residue collecting, as well as, the social, economical and productive reality of those who are directly involved in the collecting itself, its productive chain of the material, including the handling, transportation and its final destiny. It means a social, productive, economical diagnosis, that in a such way,the local society and the organs of inspection can act in a better way to control the problems that include solid urban residue and come from a bad administration. That way, this work proposes to carry out a study that has as result a diagnosis with feasible alternatives on management, taking as basis, social and economical aspects that compound this productive chain. This work can bring great contributions to a better local reality through the introduction of an integrated and supported system of management of solid residue that includes a selective collecting and the creation of a sanitary area. Taking that into consideration, we can contribute to minimize the environmental impacts in Codó Novo, caused by the garbage
Resumo:
This master's thesis aims to ascertain how the Stakeholders interactions influence the adoption of green marketing strategies from the perspective of the Alpha Company, a furniture industry located in Rio Grande do Norte, Brazil. The methodology has a qualitative approach and uses the exploratorydescriptive case study method as model of formal and systematic study. Following the theoretical and conceptual propositions of Polonsky (1995), Michell, Angle and Wood (1997) and Frooman (1999) as a reference base. This study identifies and assesses the importance degree of the relevant stakeholders, shows their expectations and needs and describes the tactics used by the company for the implementation of green marketing strategies. The study describes the reality of a furniture industry in Rio Grande do Norte, and shows his philosophy and background; identifies present stakeholders that influence the decision process of the company and also, analyzes the degree of importance of each group showing their needs and expectations and, finally, it states the changes in the organization with the implementation of green marketing strategies. The results it s concluded that stakeholders are taken into consideration in the adoption of green marketing strategies, even without a proper strategic perception from the company, an imperative to advance towards the adoption of the green marketing philosophy. This case study explores knowledge that may be used and suited to small companies that act in the strategic segment-trend of green marketing
Resumo:
This dissertation deals with the use of the Balanced Scorecard (BSC) in the Military Police of Rio Grande do Norte (PMRN), an organization of service delivery in the area of public safety. For this purpose we sought refuge in the company's own documents, which presented the mission, vision and strategic objectives, which are items essential to the development of the instrument and its prospects. With the general objective of developing the BSC to PMRN, fitting into the methodology in a single case study, that from the desk study and according to their development, we established the classification of goals to the generic models and the BSC then adjusted according to public understanding of the corporation presented by professionals in the process of collection and in-depth interviews. Thus emerged the strategy map PMRN, based on the presentation of the causes and effects between the strategic objectives of each perspective, the value proposition to customers, internal processes needed to meet this value proposition and intangible assets, which are the basis to execute these processes
Resumo:
The search for a sustainable development is result of the exhaustion of the natural resources of the planet that demands globalizated politics with practical of compatible economic development with the protection of the quality of life for the future generations. This work presents a study on the thematic on the environmental liabilities in the organizations with focus in the industry of the oil and the production of oil in land in the state of Rio Grande do Norte. Some types of environmental liabilities are presented, as well as, some estimates techniques. Moreover, this work presents surveys of some variable that stimulate the organizations to implant technologies of reduction of the impacts in the environment as: the environmental legislation, costs, the main impacts of the production of oil in land. On the basis of the bibliographical research and in the identified variable, it was carried a case study with state and municipal technician that act in the sectors of fiscalization (IBAMA-RN and IDEMA-RN) with the objective to deepen the discussion regarding the impacts of the industry of the oil, the effectiveness of the current law, the performance of the institutions the federal level and how to prevent impacts in the environment. It was observed that the environmental liabilities are a little spread subject in the organizations, perhaps to be unknown and of few theoretical referencees at the national level, regarding to the evaluation techniques. At the same time, absentee in the national politics that conducts the oil exploration
Resumo:
The present study inserts on the international environmental thematic, approaching the integrated management of solid waste and the participation of the social actors in the search of the sustainable development. The awareness in combining it still describes a Selective Collection Program SCP of solid waste, in partnership with the municipal public power, in the development of joint actions that result in better alternatives of waste management in the urban centers, providing better life quality for the population and conservation of the environment. The aim of this research is to study problematic of the management of solid waste under the point of view of the environmental awareness and the participation of the population in a city of Brazil. In this matter, the target of the work is focusing on the strategy of solid waste management, through the attitudes and the respondents behaviors to aid in the making decision of the public manager related to the implantation of a selective collection program in Natal/RN. The methodology used in this work constitutes in the application of a questionnaire with scales of the type Likert being constituted of variables that compose the aspects of attitudes and of behaviors, besides a social-demographic scale. For analysis statistics is used the Pearson s Chi-Square Method in order to verify the dependence of the associations between the social-demographic variables and the attitude and the behavior ones. The results appear for a larger participation in a SCP, since this provides a better quality of life of the population (28,3 %), followed for offering a financial advantage (27,3%). Other results indicate the existence of the variables that exercise influence on the environmental awareness of the population to its demographic aspects
Resumo:
Due of industrial informatics several attempts have been done to develop notations and semantics, which are used for classifying and describing different kind of system behavior, particularly in the modeling phase. Such attempts provide the infrastructure to resolve some real problems of engineering and construct practical systems that aim at, mainly, to increase the productivity, quality, and security of the process. Despite the many studies that have attempted to develop friendly methods for industrial controller programming, they are still programmed by conventional trial-and-error methods and, in practice, there is little written documentation on these systems. The ideal solution would be to use a computational environment that allows industrial engineers to implement the system using high-level language and that follows international standards. Accordingly, this work proposes a methodology for plant and control modelling of the discrete event systems that include sequential, parallel and timed operations, using a formalism based on Statecharts, denominated Basic Statechart (BSC). The methodology also permits automatic procedures to validate and implement these systems. To validate our methodology, we presented two case studies with typical examples of the manufacturing sector. The first example shows a sequential control for a tagged machine, which is used to illustrated dependences between the devices of the plant. In the second example, we discuss more than one strategy for controlling a manufacturing cell. The model with no control has 72 states (distinct configurations) and, the model with sequential control generated 20 different states, but they only act in 8 distinct configurations. The model with parallel control generated 210 different states, but these 210 configurations act only in 26 distinct configurations, therefore, one strategy control less restrictive than previous. Lastly, we presented one example for highlight the modular characteristic of our methodology, which it is very important to maintenance of applications. In this example, the sensors for identifying pieces in the plant were removed. So, changes in the control model are needed to transmit the information of the input buffer sensor to the others positions of the cell
Resumo:
We propose in this work a software architecture for robotic boats intended to act in diverse aquatic environments, fully autonomously, performing telemetry to a base station and getting this mission to be accomplished. This proposal aims to apply within the project N-Boat Lab NatalNet DCA, which aims to empower a sailboat navigating autonomously. The constituent components of this architecture are the memory modules, strategy, communication, sensing, actuation, energy, security and surveillance, making these systems the boat and base station. To validate the simulator was developed in C language and implemented using the graphics API OpenGL resources, whose main results were obtained in the implementation of memory, performance and strategy modules, more specifically data sharing, control of sails and rudder and planning short routes based on an algorithm for navigation, respectively. The experimental results, shown in this study indicate the feasibility of the actual use of the software architecture developed and their application in the area of autonomous mobile robotics
Resumo:
The manufacture of prostheses for lower limb amputees (transfemural and transtibial) requires the preparation of a cartridge with appropriate and custom fit to the profile of each patient. The traditional process to the patients, mainly in public hospitals in Brazil, begins with the completion of a form where types of equipment, plugins, measures, levels of amputation etc. are identified. Currently, such work is carried out manually using a common metric tape and caliper of wood to take the measures of the stump, featuring a very rudimentary, and with a high degree of uncertainty geometry of the final product. To address this problem, it was necessary to act in two simultaneously and correlated directions. Originally, it was developed an integrated tool for viewing 3D CAD for transfemoral types of prostheses and transtibial called OrtoCAD I. At the same time, it was necessary to design and build a reader Mechanical equipment (sort of three-dimensional scanner simplified) able to obtain, automatically and with accuracy, the geometric information of either of the stump or the healthy leg. The methodology includes the application of concepts of reverse engineering to computationally generate the representation of the stump and/or the reverse image of the healthy member. The materials used in the manufacturing of prostheses nor always obey to a technical scientific criteria, because, if by one way it meets the criteria of resistance, by the other, it brings serious problems mainly due to excess of weight. This causes to the user various disorders due to lack of conformity. That problem was addressed with the creation of a hybrid composite material for the manufacture of cartridges of prostheses. Using the Reader Fitter and OrtoCAD, the new composite material, which aggregates the mechanical properties of strength and rigidity on important parameters such as low weight and low cost, it can be defined in its better way. Besides, it brings a reduction of up steps in the current processes of manufacturing or even the feasibility of using new processes, in the industries, in order to obtain the prostheses. In this sense, the hybridization of the composite with the combination of natural and synthetic fibers can be a viable solution to the challenges offered above
Resumo:
Petroleum exists in the nature in certain underground formations where it is adsorbed into the rocks pores. For the conventional recovery methods usually only 30% of the oil is extracted and this can be credited, basically, to three aspects: high viscosity of the oil, geology of the formation and high interfacial tensions between the reservoir s fluids. The enhanced recovery methods use the injection of a fluid or fluids mixture in a reservoir to act in points where the conventional process didn't reach the recovery rates. Microemulsion flooding, considered an enhanced method, has the purpose to desorb the oil from the rock formation and to attain an efficient displacement of the oil emulsion. With this in mind, this work was accomplished with two main objectives: the study of the parameters effect that influence a microemulsified system (surfactant and cosurfactant types, C/S rate and salinity) and the evaluation of displacement efficiency with the microemulsions that showed stability in the rich aqueous area. For the analyzed parameters it was chose the microemulsions composition used in the recovery stage: 25% water, 5% kerosene, 46.7% of butanol as cosurfactant and 23.3% of BC or SCO cosurfactant. The core plugs of Assu and Botucatu sandstones were appraised in porosity and permeability tests and then submitted to the steps of saturation with seawater and oil, conventional recovery with water and enhanced recovery with the selected microemulsions. The Botucatu sandstone presented better recovery parameters, and the microemulsion composed with BS surfactant had larger recovery efficiency (26.88%)
Resumo:
O presente artigo apresenta os resultados de uma pesquisa cujo objetivo foi identificar as percepções dos professores de Biologia do município de Piracicaba, SP, e dos alunos concluintes de um curso de licenciatura em Ciências Biológicas em relação à presença da Educação Ambiental em sua formação inicial, a fim de discutir a inserção da temática na universidade em geral e, especificamente, na licenciatura em Ciências Biológicas. Os resultados indicam que o professor de Biologia ainda necessita de uma formação mais crítica em relação à educação ambiental e que, numa perspectiva complexa, essa formação necessita ser tratada de forma mais rigorosa na universidade e nas licenciaturas em Ciências Biológicas para que os profissionais formados possam atuar, efetivamente, na formação cidadã para uma sociedade mais sustentável.
Resumo:
The Serido is a region of northeastern Brazil highlighted by its problems related to water scarcity because of its semi-arid region, large rates of evaporation and rainfall irregular and scarce. Thus, the underground dams, become a strategically important resource with a simple and inexpensive technique for storage of water. They act in a positive way in the development of inland cities that suffer from drought, because in addition to exercise a great improvement in the social role of these families, can enjoy the type of soil (silt) and provides water for both irrigation and for human consumption throughout the year. Is therefore essential to its monitoring and studies to assess its effectiveness in accordance with its purposes, along with their wells Amazons, as can occur in conditions of physical degradation, chemical and microbiological appropriate, according to the Ordinance No 518/04 Ministry of Health, however, the proposed work aims to analyze the underground dams in the municipality of Sierra Negra North-RN (semi-arid region) as to their uses and their influences on the quality and quantity of water in periods of drought and rain. Analyzing monthly these parameters: determination of pH, conductivity, calcium, magnesium, sodium, potassium, chloride, sulfate, RAS (sodium adsorption ratio), turbidity, total iron, nitrite, nitrate, total dissolved solids (STD), bicarbonate (HCO3), fecal coliform and pesticides compared to the standards allowed by the Ordinance in force for quality for human consumption. While at the risk of salinity and sodicity on the model proposed by the United Salinity Laboratory (USSL). Although efficient, it was found that results varied annually on water quality which may influence their specific uses, whether or irrigation water supply in the city
Resumo:
The state of Rio Grande do Norte, possessor of an extremely irregular regime of rains, has the necessity of enlarge and specify the researches about its own hydro-climatic conditions, to achieve trustworthy results that are able to minimize the adversities imposed by these conditions and make possible the implementation of a better planning in the economic activities and of subsistence that somehow utilize of the multiple uses of hydro resources of the State. This way, the daily values observed from the pluviometric series of 166 posts, with 45 years uninterrupted of historic data, were adjusted to the incomplete gamma function to the determination of the probability of rain in the 36 period of ten days in which the year was divided. To the attainment of the α and β parameters of this function it was applied the method of the maximum verisimilitude allowing, in the end, to analyze the temporal and spatial distribution of the rain in the level of 75% of probability. The values of potential evapo-transpiration were calculated by the Linacre method that, through the SURFER software, were confronted with the dependant rain, obtaining, in this way, the spatialization of the potential hydro availability, which the values can be known to any period of ten days of the year, city and/or region of the state of Rio Grande do Norte. With the identification of the main meteorological systems that act in the State, we sought to better comprehend how this systems interfere, in the irregular regime of rain, in the situations of several clime in the major part of Rio Grande do Norte and in the hydro regional balance. And, finally, with these data in hand and with the generated maps, we verified that space-temporal distribution of the rain and of the potential hydro availability were heterogeneous in the whole State, mainly in the West and Central regions, inserted in potiguar s semi-arid, which, after the period of the rains station, suffers with dry season and length drought during the rest of the year
Resumo:
In the contemporary society, the language is presented in all social spaces and assumes many different purposes in order to meet the needs that emerge from each of these sphere. In traffic, this reality is not different. To guide vehicles, it is necessary to know, by means of reading artifacts, what the legislation establishes in what concerns the way to act in this domain. Thus, this works aims at describing the practices of literacy held in events of driver trainings and know the expectations generated by drivers/learners from this training. In theoretical terms, it anchors in Literacy Studies, comprehended here as social practices (BARTON; HAMILTON, 1998; KLEIMAN, 1995, 2008; MORTATTI, 2004; STREET, 1984; OLIVEIRA, 2008, 2010; ROJO, 2009; PAZ, 2008). Genre Theory (BRONCKART, 2004, 1999; OLIVEIRA, 2010) and in your multimodal instance (KRESS; VAN LEEUWEN, 1996; DIONÍSIO, 2006). In terms of methodology, it follows the bias of qualitative research, because of its ethnographic nature (BOGDAN; BIKLEN, 1994; MINAYO, 2010; CANÇADO, 1994; CHIZZOTTI, 2005). The research corpus was generated by reading the Brazilian Traffic Code, by observing the literacy events held in Drivers Training Centers of Natal, analysis of course books used in these events, plus questionnaires with open and closed questions and semistructured interviews. The collaborators are constituted of drivers in training, and instructors who work in this field. The analyses show significant contributions regarding the placement more committed of future drivers with the welfare and safety of those who use the public roads, from the practice or reading done during the traffic training. The contribution of this work lies in the possibility to expand the discussion about the language practice uses regarding the training for the traffic, more specifically, the training of drivers of vehicles
Resumo:
Many environmental ethics thinkers bear the existing ecological crisis is resultig from the fact that both, our thoughts and our actions would be antropocentric. It means that they (our thoughts and our actions) would have the human needs and wishes satisfaction as their only goals. However, a careful investigation about the relationship among humans could perhaps unveil that we are not antropocentric yet. The aim of this work is to enlighten this: whether we think and act in an antropocentric way as it seems to be largely accepted. It seems that we have found a satisfatory answer to the question