938 resultados para DC electrical conductivity


Relevância:

80.00% 80.00%

Publicador:

Resumo:

The municipality of Guamaré is located on the north coast of RN, Salineira zone, with a land area of 259 km2 and a population of approximately 12,500 inhabitants (IBGE, 2010). Presents strong morphological instability caused mainly by the influence of human activities in the region. The present study aims to assess the existing levels of salts in the springs of the region, by evaluating the electrical conductivity, pH, salinity, chlorides, hardness, calcium, magnesium and heavy metals in the water. The collection and analysis methods adopted in the survey are based on APHA (2005). The electrical conductivity, salinity and chloride behaved similarly throughout the study. Some points suffered the direct effect of the salt ponds and others. Given the existence of a drainage ditch between the saline and monitored region, there was little change in the environment, including the native vegetation. The opposite situation occurred in farms where the region is fully committed local vegetation and water holes and wells used in the past for domestic use are practically disabled (high salt content). In Rio Miassaba formation of an estuary is reversed, with the farther out from the sea showing higher salt concentracions, which may be associated with the discharge of organic matter and natural evaporation rate. In periods of no rainfall had a few points higher than the levels of salts found in seawater and may be associated with high evaporation in the region. Detected a positive factor is the high resilience and reducing salt, after periods of rainfall incidence

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Hybrid systems formed from polymers and transition metals have now their physical and chemical properties extensively investigated for use in electronic devices. In this work, Titanium Dioxide (TiO2) from the precursor of titanium tetrabutoxide and the composite system Poly(Ethylene Glycol)-Titanium Dioxide (TiO2-PEG) were synthesized by sol-gel method. The PEG as acquired and TiO2 and composites powders were analyzed by X-Ray Diffraction (XRD), Spectroscopy in the Infrared region with Fourier transform (IRFT), Thermogravimetric Analysis (TGA), Scanning Electron Microscopy (SEM) and Electrochemical Impedance Spectroscopy (EIS). In the XRD analysis were observed in the TiO2 crystal faces of one of its polymorphs - anatase phase, crystal planes in Poly (Ethylene Glycol) with considerable intensity and in the composite systems the mixture of crystal faces of their precursors isolated and reduction of crystallinity. The TG / DTG suggested increasing the thermal instability of PEG in the composite powders as TiO2 is incorporated into the system. Spectral analysis presented in the infrared overlapping bands for the polymer and metal oxide, reducing the intensity of symmetric stretching of ligand groups in the main chain polymer and angular deformations; were observed using SEM micrographs of the morphological changes suffered by composite systems with the variation of the oxide concentration. Analyses by impedance spectroscopy indicated that the increased conductivity in composite occurs in line with the addition of the metal oxide concentration in the composite system

Relevância:

80.00% 80.00%

Publicador:

Resumo:

The polycrystalline sample of Nd3/2Bi3/2Fe5O12 was prepared by a high- temperature solid-state reaction technique. Preliminary X-ray structural analysis exhibits the formation of a single-phase tetragonal structure at room temperature. Microstructural analysis by scanning electron microscopy shows that the sintered sample has well defined grains. These grains are distributed uniformly throughout the surface of the sample. Detailed studies of dielectric response at various frequencies and temperatures exhibit a dielectric anomaly at 400 A degrees C. The electrical properties (impedance, modulus and conductivity) of the material were studied using a complex impedance spectroscopy technique. These studies reveal a significant contribution of grain and grain boundary effects in the material. The frequency dependent plots of modulus and the impedance loss show that the conductivity relaxation is of non-Debye type. Studies of electrical conductivity with temperature demonstrate that the compound exhibits Arrhenius-type of electrical conductivity. Study of ac conductivity with frequency suggests that the material obeys Jonscher's universal power law.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Among the new drugs launched into the market since 1980, up to 30% of them belong to the class of natural products or they have semisynthetic origin. Between 40-70% of the new chemical entities (or lead compounds) possess poor water solubility, which may impair their commercial use. An alternative for administration of poorly water-soluble drugs is their vehiculation into drug delivery systems like micelles, microemulsions, nanoparticles, liposomes, and cyclodextrin systems. In this work, microemulsion-based drug delivery systems were obtained using pharmaceutically acceptable components: a mixture Tween 80 and Span 20 in ratio 3:1 as surfactant, isopropyl mirystate or oleic acid as oil, bidistilled water, and ethanol, in some formulations, as cosurfactants. Self-Microemulsifying Drug Delivery Systems (SMEDDS) were also obtained using propylene glycol or sorbitol as cosurfactant. All formulations were characterized for rheological behavior, droplet size and electrical conductivity. The bioactive natural product trans-dehydrocrotonin, as well some extracts and fractions from Croton cajucara Benth (Euphorbiaceae), Anacardium occidentale L. (Anacardiaceae) e Phyllanthus amarus Schum. & Thonn. (Euphorbiaceae) specimens, were satisfactorily solubilized into microemulsions formulations. Meanwhile, two other natural products from Croton cajucara, trans-crotonin and acetyl aleuritolic acid, showed poor solubility in these formulations. The evaluation of the antioxidant capacity, by DPPH method, of plant extracts loaded into microemulsions evidenced the antioxidant activity of Phyllanthus amarus and Anacardium occidentale extracts. For Phyllanthus amarus extract, the use of microemulsions duplicated its antioxidant efficiency. A hydroalcoholic extract from Croton cajucara incorporated into a SMEDDS formulation showed bacteriostatic activity against colonies of Bacillus cereus and Escherichia coli bacteria. Additionally, Molecular Dynamics simulations were performed using micellar systems, for drug delivery systems, containing sugar-based surfactants, N-dodecylamino-1-deoxylactitol and N-dodecyl-D-lactosylamine. The computational simulations indicated that micellization process for N-dodecylamino-1- deoxylactitol is more favorable than N-dodecyl-D-lactosylamine system.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

O trabalho teve por objetivo estudar metodologias para a condução do teste de condutividade elétrica, verificando sua eficiência na identificação de diferentes níveis de vigor de lotes de sementes de rúcula. Para tanto, o estudo foi conduzido utilizando cinco lotes de sementes de Rúcula Cultivada e cinco lotes de sementes de Rúcula Gigante. Foram realizados os testes de germinação, primeira contagem de germinação, emergência de plântulas em casa de vegetação e variações no teste de condutividade elétrica (temperaturas de 20ºC, 25ºC e 30ºC; volumes de 25mL, 50mL e 75mL de água; 25 e 50 sementes; e períodos de 1, 2, 4, 6, 8, 12, 16 e 24 horas). Diante dos resultados obtidos, verificou-se que o tempo de embebição para o teste de condutividade elétrica pode ser reduzido para 4 horas e o volume de água utilizado pode ser reduzido para 25 ou 50mL. As combinações de 50 sementes apresentaram menor coeficiente de variação e as temperaturas mais adequadas foram de 25ºC e 30ºC. Assim, concluiu-se que a condição mais adequada para o teste de condutividade elétrica em sementes de rúcula é a utilização de 50 sementes em 50mL de água por 4 horas, a 25ºC.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Information regarding the use of growth regulators in sunn hemp is still scarce, especially on the physiologic quality of seeds and growth seedlings. In this aspect, product knowledge and application rate stands out as relevant factors in production of quality seeds. This work aimed to evaluated the effect of the foliar application of growth regulators (mepiquat chloride, etil-trinexapac and paclobutrazol) in different rates (0; 75; 150; 225 and 300 g ha(-1)), on the physiological quality of seeds and growth seedlings of Crotalaria juncea cultivated in no-tillage system. The treatments were disposed in randomized complete block design in factorial scheme 3 x 5 (regulators x rates of application), with four replications. The results were submitted to the variance analysis, with the growth regulators compared by Tukey test and the rates for polynomial regression. Not if recommended the application of mepiquat chloride in sunn hemp culture by reducing the potential of seeds germination and dry biomass of seedlings. The etil-trinexapac must be applied in rate of 300 g ha(-1), based on the reduction of moisture content and the electrical conductivity of seeds, the greater total length of seedlings and dry biomass of seedlings. The paclobutrazol must be applied in rate of 75 g ha(-1), considering the potential and speed of seeds germination.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Accelerated aging test is an important procedure to be used, beyond other aim, for breeding programs to select cultivars with storage and development potential under high relative humidity and temperature. At accelerated aging test in soybean seeds, the temperature and time of exhibition they were not still totally established, factors that cause divergence among the researchers, mainly with relationship to the most appropriate periods. The aim was to evaluate the behavior of soybean seeds submitted to accelerated aging test. Seeds of the varieties IAC-15, CAC-1, FT-Estrela and IAC-Foscarin 31 were submitted to germination test, electrical conductivity and accelerated aging (41 degrees C, during 44, 48, 52, 56, 60, 64, 68, 72 and 76 hours). There are differences among cultivars evaluated in relation to accelerated aging test sensibilility; the cultivars are sensibles to increasing the exposition time; the accelerated aging test can be used to select cultivars in breeding programs; the cultivar FT-Estrela can be sowed at regions with high temperature and humidity.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

The high quality of seed trading for producers is very important to obtain high productivity. The aim of this work was to evaluate the effects of different periods of artificial seed aging on contents of sugars, proteins, amino acids and ions, on imbibition solution of electrical conductivity test, as well as its relationships with standard germination and vigor in bean seeds at the Perola cultivar. The research was carried out at the Laboratory of Seed Analysis - Faculdade de Engenharia - Unesp - Campus de Ilha Solteira. The experimental design was in completely randomized blocks. The seeds were submitted to eight accelerated aging conditions (zero, 24, 48, 72, 96, 120, 144 and 168 hours). The seed germination, seed vigor and leakage contents in exudates of bulk conductivity were Influenced by the increase in the time of seed exposition to accelerated aging. After seventy-two hours of exposition to the aging, a considerable decline in seed germination and vigor was observed. There was also an increase of leakage contents, such as amino acids, sugars, potassium and phosphorus ions. The increase of leakage contents is inversely related to seeds germination and vigor.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Neste trabalho são apresentadas duas técnicas para a avaliação da dispersão, num corpo d'água receptor, do efluente líquido de uma refinaria de petróleo. Assim, a pluma de dispersão foi caracterizada por medidas em campo de condutividade elétrica e por simulação computacional (simulador Cormix). Como caso de estudo, escolheu-se uma refinaria de petróleo cujo efluente é lançado no rio Atibaia (Paulínia/SP). O comportamento do efluente foi avaliado em um trecho de 1000 m após o ponto de lançamento. Os resultados demonstraram que a medição da condutividade elétrica é uma técnica adequada para a avaliação da dispersão de efluentes líquidos de refinaria de petróleo, pois apresentam alta condutividade elétrica e, com isso, há um forte contraste entre os valores do efluente e do rio. Além disso, outros parâmetros de qualidade da água do rio seguiram comportamento de dispersão semelhante ao da condutividade. A pluma de dispersão gerada pelo simulador computacional apresentou uma elevada concordância com os dados obtidos em campo. Nesse sentido, a simulação computacional pode ser uma ferramenta útil para a avaliação da dispersão do efluente considerando-se cenários hipotéticos, e para projetos de emissários.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)